Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “eigenvalues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

SCALE capabilities for high temperature gas-cooled reactor analysis

The SCALE code system’s ability to address stochastic distributions of fuel particles within a graphite matrix has been revisited in both multigroup (MG) features and continuous-energy (CE) Monte Carlo methods. Furthermore, this paper describes current and emergent SCALE capabilities within the CSAS sequence to address double-heterogeneous systems and presents verification and validation studies of these methods and data. Good agreement was obtained for a high temperature gas-cooled reactor (HTGR) fuel pebble model between CSAS MG eigenvalue calculations and corresponding CE reference solutions. Code-to-code comparisons for this HTGR pebble model showed good agreement of CSAS-KENO and CSAS-Shift CE calculations and the Serpent and MCNP codes in terms of eigenvalues and reaction rate ratios. Validation studies based on two HTGR experiments resulted in good agreement between MG and CE results, as well as between experiment and calculation, although the level of agreement was significantly influenced by the applied ENDF/B nuclear data library.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

An uncertainty quantification method relevant to material test reactors

Within material test reactor calculations, energy dependent flux and reaction rate uncertainties are typically not quantified when performing as-run analyses to determine the neutron field experienced by the experiment. When high fidelity Monte-Carlo codes are used in such analyses, straight forward methods to calculate output uncertainties are not available, instead expert opinion is used to postulate computational uncertainties. New methods to propagate uncertainties through these high fidelity simulations are available when sufficient computational power is available. A tool is developed here for sampling any part of an MCNP input from random distributions to determine output uncertainties based on those inputs. Another tool is developed to sample nuclear data cross-section in ACE format using multi-group nuclear data covariances. The Total Monte-Carlo Method and Gesellschaft für Anlagen-und Reaktorsicherheit method (GRS) are implemented and compared to one another as well as MCNP sensitivity and uncertainty calculations. The methods were applied to the Godiva critical sphere k-eigenvalue, the UAM pin-cell benchmark energy dependent flux and reaction rates, and the Advanced Test Reactor energy dependent flux within an experimental location. Furthermore, the two methods agree well, with GRS allowing for an order of magnitude speedup for reaction rate uncertainty calculations and several orders of magnitude for eigenvalue uncertainty calculations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Two-step neutronics calculations with Shift and Griffin for advanced reactor systems

This research develops the initial coupling of the Shift Monte Carlo (MC) code and the Griffin reactor physics code for reactor analysis of non–light-water reactor systems. The novelty of this work is twofold. It is the first application of Shift to produce the multigroup cross sections needed for Griffin as applied to a non–light-water reactor system; and, the first investigation and analysis of characteristics of the Empire microreactor benchmark that should be considered for steady state and transient reactor physics calculations. This application uses the previously developed two-step neutronics analysis workflow to demonstrate this initial coupling. Here, we outline the two-step neutronics analysis workflow in which the Shift MC code is used to generate the multigroup cross sections and fluxes needed by the Griffin deterministic solver. Details on how these multigroup cross sections are generated using MC tallies are given, as well as the practicalities and limitations of the two-step neutronics workflow. The Empire microreactor benchmark was used to investigate and validate this coupling. Results using this benchmark show good agreement between Griffin calculations using Serpent-generated cross sections and Shift-generated cross sections. Analysis of the characteristics of this Empire benchmark show larger eigenvalue differences between heterogeneous and pin–homogenized solutions compared to those of traditional light-water reactor (LWR) designs, thus requiring super homogenization factor corrections for accurate eigenvalue and power distribution predictions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Efficient continuous Energy-Multigroup hybrid depletion scheme using the Shift Monte Carlo code. Part I: Energy condensation sensitivity analysis

Monte Carlo (MC) codes coupled to depletion solvers are increasingly used to provide high fidelity fuel cycle modeling capabilities. Here, these coupled depletion-MC tools produce accurate results in general but can experience nonphysical spatial oscillations when time steps are large or when a system’s dominance ratio approaches unity. Two substepping techniques have been developed previously to remedy and dampen these spatial oscillations without needing to reduce step sizes. The first approach relied on higher-order techniques to account for spectral changes within steps (extrapolation and interpolation techniques). The second approach used the first order perturbation (FOP) theory to account for the change in the one-group spatial flux distribution within steps. This paper develops a hybrid depletion methodology which, in a way, combines how the flux is handled in both substepping techniques. Specifically, the multigroup (MG) MC Shift code is used to update the flux distribution within steps rather than a one-group FOP solver. A fully reflected pincell is investigated, which is not spatially dependent in the MG representation. Thus, the analysis in this paper is an initial demonstration of hybrid depletion. An upcoming companion paper will focus on how the hybrid depletion dampens spatial oscillations. The hybrid depletion approach is verified to be consistent with previous constant extrapolation depletion (CED) methods. This paper finds that the hybrid CED exhibits some error in the eigenvalue and one group constants within macro steps. To address this discrepancy, a simple interpolation scheme (CELI) is investigated. This work found that CELI sufficiently addresses the discrepancy in spectrum for macro steps up to 100 days. Overall, this work demonstrates that the hybrid depletion method can significantly reduce the number of high fidelity MC executions in a MC-coupled depletion with an acceptable eigenvalue error.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

A low-rank power iteration scheme for neutron transport criticality problems

Computing effective eigenvalues for neutron transport often requires a fine numerical resolution. Here, the main challenge of such computations is the high memory effort of classical solvers, which limits the accuracy of chosen discretizations. In this work, we derive a method for the computation of effective eigenvalues when the underlying solution has a low-rank structure. This is accomplished by utilizing dynamical low-rank approximation (DLRA), which is an efficient strategy to derive time evolution equations for low-rank solution representations. The main idea is to interpret the iterates of the classical inverse power iteration as pseudo-time steps and apply the DLRA concepts in this framework. In our numerical experiment, we demonstrate that our method significantly reduces memory requirements while achieving the desired accuracy. Analytic investigations show that the proposed iteration scheme inherits the convergence speed of the inverse power iteration, at least for a simplified setting.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

An adjoint-based method for optimising MHD equilibria against the infinite- n , ideal ballooning mode

We demonstrate a fast adjoint-based method to optimise tokamak and stellarator equilibria against a pressure-driven instability known as the infinite-n ideal ballooning mode. We present three finite-β (the ratio of thermal to magnetic pressure) equilibria: one tokamak equilibrium and two stellarator equilibria that are unstable against the ballooning mode. Using the self-adjoint property of ideal magnetohydrodynamics, we construct a technique to rapidly calculate the change in the eigenvalue, a measure of ideal ballooning instability. Using the SIMSOPT optimisation framework, we then implement our fast adjoint gradient-based optimiser to minimise the eigenvalue and find stable equilibria for each of the three originally unstable equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Application of Lagrangian techniques for calculating the on-axis rotational transform

The Floquet exponents of periodic field lines are studied through the variations of the magnetic action on the magnetic axis, which is assumed to be elliptical. The near-axis formalism developed by Mercier, Solov'ev and Shafranov is combined with a Lagrangian approach. The on-axis Floquet exponent is shown to coincide with the on-axis rotational transform. A discrete solution suitable for numerical implementation is introduced, which gives the Floquet exponents as solutions to an eigenvalue problem. This discrete formalism expresses the exponents as the eigenvalues of a $6$ X $6$ matrix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Efficient Mixed-Precision Matrix Factorization of the Inverse Overlap Matrix in Electronic Structure Calculations with AI-Hardware and GPUs

In recent years, a new kind of accelerated hardware has gained popularity in the artificial intelligence (AI) community which enables extremely high-performance tensor contractions in reduced precision for deep neural network calculations. In this article, we exploit Nvidia Tensor cores, a prototypical example of such AI-hardware, to develop a mixed precision approach for computing a dense matrix factorization of the inverse overlap matrix in electronic structure theory, S –1 . This factorization of S –1 , written as ZZT = S –1 , is used to transform the general matrix eigenvalue problem into a standard matrix eigenvalue problem. Here we present a mixed precision iterative refinement algorithm where Z is given recursively using matrix–matrix multiplications and can be computed with high performance on Tensor cores. To understand the performance and accuracy of Tensor cores, comparisons are made to GPU-only implementations in single and double precision. Additionally, we propose a nonparametric stopping criteria which is robust in the face of lower precision floating point operations. The algorithm is particularly useful when we have a good initial guess to Z, for example, from previous time steps in quantum-mechanical molecular dynamics simulations or from a previous iteration in a geometry optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exact and Model Exchange-Correlation Potentials for Open-Shell Systems

The conventional approaches to the inverse density functional theory problem typically assume nondegeneracy of the Kohn–Sham (KS) eigenvalues, greatly hindering their use in open-shell systems. Here, we present a generalization of the inverse density functional theory problem that can seamlessly admit degenerate KS eigenvalues. Additionally, we allow for fractional occupancy of the Kohn–Sham orbitals to also handle noninteracting ensemble-v-representable densities, as opposed to just noninteracting pure-v-representable densities. We present the exact exchange-correlation (XC) potentials for six open-shell systems–four atoms (Li, C, N, and O) and two molecules (CN and CH 2 )–using accurate ground-state densities from configuration interaction calculations. We compare these exact XC potentials with model XC potentials obtained using nonlocal (B3LYP, SCAN0) and local/semilocal (SCAN, PBE, PW92) XC functionals. Although the relative errors in the densities obtained from these DFT functionals are of $O$(10 –3 to 10 –2 ), the relative errors in the model XC potentials remain substantially large–$O$(10 –1 to 10 0 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

..delta..-Learning of High-Fidelity Electronic Structure Using Graph Neural Networks with Modified Node-Level Features

In this work, we present a ..delta..-learning approach for predicting the eigenvalues calculated with the hybrid functional HSE06 (..epsilon..nkHSE) for a set of metal and nitrogen doped graphene catalysts (MNCs) from Perdew-Burke-Ernzerhof (PBE) inputs. The model presented here incorporates electronic scalar features along with structural information in a graph neural network (GNN). In particular, the PBE eigenvalues for different bands and k-points and orbital-resolved projectors are combined with the applied potential as node-level features along with structural information within the Atomistic Line Graph Neural Network (ALIGNN) architecture. These features enable flexibility for systems with electrified interfaces, such as in electrocatalysts and achieves mean absolute error (MAE) of less than 0.1 eV. The machine learning model reported here achieves a strong generalization to left-out adsorbates (MAE = 0.074 eV) and leave-one-chemical-space-out (MAE = 0.08 eV) and completely left-out metals (MAE = 0.072 eV), confirming the robustness of the machine learning (ML) model in predicting ..epsilon..nkHSE.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nowcasting Earthquakes: Imaging the Earthquake Cycle in California With Machine Learning

We propose a new machine learning-based method for nowcasting earthquakes to image the time-dependent earthquake cycle. The result is a timeseries that may correspond to the process of stress accumulation and release. The timeseries are constructed by using principal component analysis of regional seismicity. The patterns are found as eigenvectors of the cross-correlation matrix of a collection of seismicity timeseries in a coarse grained regional spatial grid (pattern recognition via unsupervised machine learning). The eigenvalues of this matrix represent the relative importance of the various eigenpatterns. Using the eigenvectors and eigenvalues, we compute the weighted correlation timeseries of the regional seismicity. This timeseries has the property that the weighted correlation generally decreases prior to major earthquakes in the region, and increases suddenly just after a major earthquake occurs. As in a previous paper, we find that this method produces a nowcasting timeseries that resembles the hypothesized regional stress accumulation and release process characterizing the earthquake cycle. We then address the problem of whether the timeseries contain information regarding future large earthquakes. For this, we compute a receiver operating characteristic and determine the decision thresholds for several future time periods of interest (optimization via supervised machine learning). We find that signals can be detected that can be used to characterize the information content of the timeseries. These signals may be useful in assessing present and near-future seismic hazards.

58 GEOSCIENCES↗
DOE OSTI2022

Variational quantum state eigensolver

Extracting eigenvalues and eigenvectors of exponentially large matrices will be an important application of near-term quantum computers. The variational quantum eigensolver (VQE) treats the case when the matrix is a Hamiltonian. Here, we address the case when the matrix is a density matrix ρ. We introduce the variational quantum state eigensolver (VQSE), which is analogous to VQE in that it variationally learns the largest eigenvalues of ρ as well as a gate sequence V that prepares the corresponding eigenvectors. VQSE exploits the connection between diagonalization and majorization to define a cost function C=Tr(ρ~H) where H is a non-degenerate Hamiltonian. Due to Schur-concavity, C is minimized when ρ~=VρV† is diagonal in the eigenbasis of H. VQSE only requires a single copy of ρ (only n qubits) per iteration of the VQSE algorithm, making it amenable for near-term implementation. We heuristically demonstrate two applications of VQSE: (1) Principal component analysis, and (2) Error mitigation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Coupled electronic and magnetic excitations in the cuprates and their role in the superconducting transition

The formation of Cooper pairs, a bound state of two electrons of opposite spin and momenta by exchange of a phonon, is a defining feature of conventional superconductivity. In the cuprate high temperature superconductors, even though the superconducting state also consists of Cooper pairs, the pairing mechanism remains intensely debated. Here, we investigate superconducting pairing in the Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) cuprate by employing spectral functions obtained from angle-resolved photoemission as input to the Bethe-Salpeter equation. Assuming Cooper pairing is driven by spin fluctuations, we construct the spin-fluctuation-mediated pairing interaction and use it to compute the eigenfunctions and eigenvalues of the Bethe-Salpeter equation for multiple Bi2212 samples. The leading d-wave eigenvalue increases as the temperature is decreased toward $T_c$, reaching a value of approximately 1 at the $T_c$ corresponding to each doping value. This suggests that spin fluctuations can approximately account for $T_c$ and mediate pairing in the cuprate superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Status of GPU capabilities within the Shift Monte Carlo radiation transport code

Shift is a general-purpose Monte Carlo (MC) radiation transport code for fission, fusion, and national security applications. Shift has been adapted to efficiently run on GPUs in order to leverage leadership-class supercomputers. This work presents Shift’s current GPU capabilities. These include core radiation transport capabilities for eigenvalue and fixed-source simulations, and support for non-uniform domain decomposition, Doppler broadening, free-gas elastic scattering, general-purpose geometry, hybrid MC/deterministic transport, and depletion. Transport results demonstrate a 2–5× GPU-to-CPU speedup on a per-node basis for an eigenvalue problem on the Frontier supercomputer and a 28× speedup for a fixed-source problem on the Summit supercomputer.

Biondo, Elliott [ORNL] (ORCID:0000000290881360)↗
DOE OSTI2020

Deformation of Lie–Poisson algebras and chirality

Linearization of a Hamiltonian system around an equilibrium point yields a set of Hamiltonian symmetric spectra: If λ is an eigenvalue of the linearized generator, -λ and $\barλ$ (hence, -$\barλ$) are also eigenvalues—the former implies a time-reversal symmetry, while the latter guarantees the reality of the solution. However, linearization around a singular equilibrium point (which commonly exists in noncanonical Hamiltonian systems) works out differently, resulting in breaking of the Hamiltonian symmetry of spectra; time-reversal asymmetry causes chirality. This interesting phenomenon was first found in analyzing the chiral motion of the rattleback, a boat-shaped top having misaligned axes of inertia and geometry [Z. Yoshida et al., Phys. Lett. A 381, 2772–2777 (2017)]. To elucidate how chiral spectra are generated, we study the three-dimensional Lie–Poisson systems and classify the prototypes of singularities that cause symmetry breaking. The central idea is the deformation of the underlying Lie algebra; invoking Bianchi’s list of all three-dimensional Lie algebras, we show that the so-called class-B algebras, which are produced by asymmetric deformations of the simple algebra s o ( 3 ) , yield chiral spectra when linearized around their singularities. The theory of deformation is generalized to higher dimensions, including the infinite-dimensional Poisson manifolds relevant to fluid mechanics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The Fermi–Löwdin self-interaction correction for ionization energies of organic molecules

(Semi)-local density functional approximations (DFAs) suffer from self-interaction error (SIE). When the first ionization energy (IE) is computed as the negative of the highest occupied orbital (HO) eigenvalue, DFAs notoriously underestimate them compared to quasi-particle calculations. Here, the inaccuracy for the HO is attributed to SIE inherent in DFAs. We assessed the IE based on Perdew-Zunger self-interaction correction on 14 small to moderate-sized organic molecules relevant in organic electronics and polymer donor materials. Though self-interaction corrected DFAs were found to significantly improve the IE relative to the uncorrected DFAs, they overestimate. However, when the self-interaction correction is interiorly scaled using a function of the iso-orbital indicator zs , only the regions where SIE is significant get a correction. We discuss these approaches and show how these methods significantly improve the description of the HO eigenvalue for the organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Self-interaction-corrected Kohn–Sham effective potentials using the density-consistent effective potential method

Density functional theory (DFT) and beyond-DFT methods are often used in combination with photoelectron spectroscopy to obtain physical insights into the electronic structure of molecules and solids. The Kohn–Sham eigenvalues are not electron removal energies except for the highest occupied orbital. The eigenvalues of the highest occupied molecular orbitals often underestimate the electron removal or ionization energies due to the self-interaction (SI) errors in approximate density functionals. Here, we adapt and implement the density-consistent effective potential method of Kohut, Ryabinkin, and Staroverov (2014) to obtain SI-corrected local effective potentials from the SI-corrected Fermi–Löwdin orbitals and density in the Fermi–Löwdin orbital self-interaction correction scheme. The implementation is used to obtain the density of states (photoelectron spectra) and HOMO–LUMO gaps for a set of molecules and polyacenes. Good agreement with experimental values is obtained compared to a range of SI uncorrected density functional approximations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A matrix completion algorithm for efficient calculation of quantum and variational effects in chemical reactions

This work examines the viability of matrix completion methods as cost-effective alternatives to full nuclear Hessians for calculating quantum and variational effects in chemical reactions. The harmonic variety-based matrix completion (HVMC) algorithm, developed in a previous study (https://doi.org/10.1063/5.0018326), exploits the low-rank character of the polynomial expansion of potential energy to recover, using a small sample, vibrational frequencies (square roots of nuclear Hessian eigenvalues) constituting the reaction path. Furthermore, these frequencies are essential for calculating rate coefficients using variational transition state theory with multidimensional tunneling (VTST-MT). HVMC performance is examined for four SN2 reactions and five hydrogen transfer reactions, with each H-transfer reaction consisting of at least one vibrational mode strongly coupled to the reaction coordinate. HVMC is robust and captures zero-point energies, vibrational free energies, zero-curvature tunneling, and adiabatic ground state and free energy barriers as well as their positions on the reaction coordinate. For medium to large reactions involving H-transfer, with the exception of the most complex Ir catalysis system, less than 35% of total eigenvalue information is necessary for accurate recovery of key VTST-MT observables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗