Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic aperture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Technology challenges for large spacecraft optical systems

The technology challenges posed by future NASA astrophysics missions in the visible region of the spectrum whose goals include making high resolution images of faint objects, and high accuracy measurements of the positions of brighter objects for dynamical studies are discussed. Concentration is on the problems associated with possible next generation great observatories in space in the post-Hubble Space Telescope, particularly those with partially filled apertures. Telescopes using interferometric techniques in the visible similar to those of radio VLBI hold the promise of providing high resolution astronomical measurements within reasonable launch constraints on mass and volume. Technology challenges in the optics, structures, and controls areas are addressed.

Synnott, S. P.↗
NASA NTRS2015

NIAC Phase II Orbiting Rainbows Granular Imager

In this paper, we present some ideas regarding the optics and imaging aspects of granular spacecraft. Granular spacecraft are complex systems composed of a spatially disordered distribution of a large number of elements, for instance a cloud of grains in orbit. An example of application is a spaceborne observatory for exoplanet imaging, where the primary aperture is a cloud instead of a monolithic aperture.

dynamics↗
NASA NTRS1979

Systems level feasibility study for the detection of extra-solar planets. Volume 1: Infrared interferometer (IRIS) known as the Stanford Concept

A sensor system for the direct detection of extrasolar planets from an Earth orbit is evaluated: a spinning, infrared interferometer (IRIS). It is shuttle deployed, free flying, requires no on-orbit assembly and no reservicing over a design life of five years. The sensor concept and the mission objectives are reviewed, and the performance characteristics of a baseline sensor for standard observation conditions are derived. A baseline sensor design is given and the enabling technology discussed. Cost and weight estimates are performed; and a schedule for an IRIS program including technology development and assessment of risk are given. Finally, the sensor is compared with the apodized visual telescope sensor (APOTS) proposed for the same mission. The major conclusions are: that with moderate to strong technology advances, particularly in the fields of long life cryogenics, dynamical control, mirror manufacturing, and optical alignment, the detection of a Jupiter like planet around a Sunlike star at a distance of 30 light years is feasible, with a 3 meter aperture and an observation time of 1 hour. By contrast, major and possibly unlikely breakthroughs in mirror technology are required for APOTS to match this performance.

Source record↗
NASA NTRS2004

Design and Performance of the Terrestrial Planet Finder Coronagraph

Terrestrial Planet Finder Coronagraph, one of two potential architectures, is described. The telescope is designed to make a visible wavelength survey of the habitable zones of at least thirty stars in search of earth-like planets. The preliminary system requirements, optical parameters, mechanical and thermal design, operations scenario and predicted performance is presented. The 6-meter aperture telescope has a monolithic primary mirror, which along with the secondary tower, are being designed to meet the stringent optical tolerances of the planet-finding mission. Performance predictions include dynamic and thermal finite element analysis of the telescope optics and structure, which are used to make predictions of the optical performance of the system.

designs↗
NASA NTRS2010

On Simulating the Impacts of Open Water Bodies on the SMAP Passive Soil Moisture Data Product

The Soil Moisture Active and Passive (SMAP) mission is a NASA earth science mission aiming at improving our understanding of the dynamics of the cycles of energy, water, and carbon at global scales. The mission features two complementary sensors on the same low-Earth orbiting platform: an L-band synthetic aperture radar (SAR) operating at 1.26 GHz and an L-band radiometer operating at 1.41 GHz. Together these instruments will provide global mapping of soil moisture and freeze/thaw states in 2-3 days, with a tentative launch date in 2014. The work reported in this study focuses primarily on the development of the SMAP radiometer-only soil moisture data product. For passive soil moisture retrieval at satellite footprint scales, one way to improve retrieval accuracy is to correct for the microwave emission from open water bodies prior to retrieval. The accuracy of this correction will depend on not only the locations of these water bodies, but also the geolocation accuracy of the instrument. As perfect knowledge is never attainable in practice, it is important to assess the impacts of these uncertainties on the SMAP radiometer observations and hence the passive soil moisture retrieval accuracy. In this presentation, we present the results of our preliminary assessment on the impacts of these uncertainties. Our study consists of two parts: (1) a sensitivity analysis on the SMAP radiometer observations due to uncertainties in water-body classification, and (2) realistic global simulations that take into account of additional uncertainties (e.g., geolocation and ancillary data) and SMAP-specific instrument characteristics (e.g., orbit sampling and antenna pattern). The results will provide valuable prelaunch guidance to the SMAP team in identifying different error sources and their relative impacts on the passive soil moisture data product.

Chan, Steven↗
NASA NTRS2021

Coastal California Water Resources II: Utilizing NASA Earth Observations to Detect and Assess the Impacts of Estuarine Breach Events for Improved Coastal Wetland Monitoring and Management

Estuaries are dynamic environments that provide a host of vital ecosystem services. California’s Marine Life Protection Act protects such ecosystems by creating Marine Protected Areas. California has approximately 440,000 acres of estuarine habitats as well as 23 Estuarine Marine Protected Areas (EMPAs); thus, in situ data collection is often difficult due to time and resource constraints. This project used remote sensing to gather data that examined the health and dynamics of California EMPAs in order to supplement ground-based field measurements. Through the use of Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS), Sentinel-2 Multispectral Instrument (MSI) and Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), this project assessed mouth state, inundation extent, turbidity, temperature, and tidal measurements for observable estuaries. The Normalized Water Difference Index from Sentinel-2 MSI captured estuary mouth state and inundation extent. Landsat 8 OLI and Sentinel-2 MSI detected differences in water quality metrics that correlated to changes in estuary mouth state (i.e., open or closed). The team’s California Estuary Assessment (CEA) tool in Google Earth Engine was successful in analyzing estuary mouth state, inundation, and water quality. It was most effective when breach events were larger than 10 meters in resolution, water surface was smooth, and imagery was unimpeded by algae or sun glint. The CEA tool will allow the partners, the Ocean Protection Council, Central Coast Wetlands Group, Southern California Coastal Water Research Project, and University of California Los Angeles (UCLA) and Davis (UCD), to better understand estuary dynamics and more effectively conduct in situ estuary monitoring.

Sarah Payne↗
NASA NTRS2019

Stars at High Spatial Resolution

We summarize some of the compelling new scientific opportunities for understanding stars and stellar systems that can be enabled by sub-milliarcsec (sub-mas) angular resolution, UV/Optical spectral imaging observations, which can reveal the details of the many dynamic processes (e.g., evolving magnetic fields, accretion, convection, shocks, pulsations, winds, and jets) that affect stellar formation, structure, and evolution. These observations can only be provided by long baseline interferometers or sparse aperture telescopes in space, since the aperture diameters required are in excess of 500 m – a regime in which monolithic or segmented designs are not and will not be feasible - and since they require observations at wavelengths (UV) not accessible from the ground. Such observational capabilities would enable tremendous gains in our understanding of the individual stars and stellar systems that are the building blocks of our Universe and which serve as the hosts for life throughout the Cosmos.

Kenneth G Carpenter↗
NASA NTRS2009

Stellar Imager - Observing the Universe in High Definition

Stellar Imager (SI) is a space-based, UV Optical Interferometer (UVOI) with over 200x the resolution of HST. It will enable 0.1 milli-arcsec spectral imaging of stellar surfaces and the Universe in general and open an enormous new 'discovery space' for Astrophysics with its combination of high angular resolution, dynamic imaging, and spectral energy resolution. SI's goal is to study the role of magnetism in the Universe and revolutionize our understanding of: 1) Solar/Stellar Magnetic Activity and their impact on Space Weather, Planetary Climates. and Life, 2) Magnetic and Accretion Processes and their roles in the Origin and Evolution of Structure and in the Transport of Matter throughout the Universe, 3) the close-in structure of Active Galactic Nuclei and their winds, and 4) Exo-Solar Planet Transits and Disks. The SI mission is targeted for the mid 2020's - thus significant technology development in the upcoming decade is critical to enabling it and future spacebased sparse aperture telescope and distributed spacecraft missions. The key technology needs include: 1) precision formation flying of many spacecraft, 2) precision metrology over km-scales, 3) closed-loop control of many-element, sparse optical arrays, 4) staged-control systems with very high dynamic ranges (nm to km-scale). It is critical that the importance of timely development of these capabilities is called out in the upcoming Astrophysics and Heliophysics Decadal Surveys, to enable the flight of such missions in the following decade. S1 is a 'Landmark/Discovery Mission' in 2005 Heliophysics Roadmap and a candidate UVOI in the 2006 Astrophysics Strategic Plan. It is a NASA Vision Mission ('NASA Space Science Vision Missions' (2008), ed. M. Allen) and has also been recommended for further study in the 2008 NRC interim report on missions potentially enabled enhanced by an Ares V' launch, although a incrementally-deployed version could be launched using smaller rockets.

Carpenter, Kenneth↗
NASA NTRS2020

Geostar – a ‘Shovel Ready’ Geostationary Microwave Sounder

A geostationary microwave sounder, capable of providing temperature, water vapor, clouds, precipitation, and wind in the presence of clouds, convection and precipitation, will add tremendously to our ability to observe dynamic atmospheric phenomena, such as hurricanes and severe storms, monsoonal moisture flow, atmospheric rivers, etc. Such a sensor is now feasible, enabled by technology that has been developed under NASA’s Instrument Incubator Program at the Jet Propulsion Laboratory. The Geostationary Synthetic Thinned Aperture Radiometer (GeoSTAR) is essentially an “AMSU in GEO”, i.e. it has similar capabilities as AMSU would have if it were operating on a geostationary satellite, but with similar spatial resolution. GEO orbits are almost 50 times higher than the LEO orbits that current AMSUs operate from, and the corresponding scaling of aperture size required to maintain spatial resolution has stymied the development of such a sensor for many decades. The aperture synthesis approach implemented with GeoSTAR finally overcomes that obstacle, and the large number of microwave receivers and associated electronics required is made possible with new technology that has now been developed. A low-cost mission operating as a hosted payload on a commercial communications satellite has been designed and is “shovel-ready”. The objectives of such a mission could be to advance our understanding and modeling of storm processes that control rapid or explosive intensification of hurricanes, mesoscale convective systems, and extratropical cyclones, or it could be to support operational weather forecasting and nowcasting. Retrieval of temperature and water vapor profiles is possible even in the presence of moderate precipitation, and with the ability to derive horizontal wind vectors by tracking water vapor features, a rich set of parameters measuring the thermodynamics, dynamics and convection and sampled every 15 minutes, will enable significant progress in storm science and forecasting.

Lambrigtsen, Bjorn H↗
NASA NTRS2001

Rayleigh Scattering Diagnostic for Dynamic Measurement of Velocity and Temperature

A new technique for measuring dynamic gas velocity and temperature is described. The technique is based on molecular Rayleigh scattering of laser light, so no seeding of the flow is necessary. The Rayleigh scattered light is filtered with a fixed cavity, planar mirror Fabry-Perot interferometer. A minimum number of photodetectors were used in order to allow the high data acquisition rate needed for dynamic measurements. One photomultiplier tube (PMT) was used to measure the total Rayleigh scattering, which is proportional to the gas density. Two additional PMTs were used to detect light that passes through two apertures in a mask located in the interferometer fringe plane. An uncertainty analysis was used to select the optimum aperture parameters and to predict the measurement uncertainty due to photon shot-noise. Results of an experiment to measure the velocity of a subsonic free jet are presented.

Seasholtz, Richard G.↗
NASA NTRS1991

Advanced development receiver thermal vacuum tests with cold wall

The first ever testing of a full size solar dynamic heat receiver using high temperature thermal energy storage was completed. The heat receiver was designed to meet the requirements for operation on the Space Station Freedom. The purpose of the test program was to quantify the receiver thermodynamic performance, its operating temperatures, and thermal response to changes in environmental and power module interface boundary conditions. The heat receiver was tested in a vacuum chamber with liquid nitrogen cold shrouds and an aperture cold plate to partially simulate a low Earth orbit environment. The cavity of the receiver was heated by an infrared quartz lamp heater with 30 independently controllable zones to produce flux distributions typical of candidate concentrators. A closed Brayton cycle engine simulator conditioned a helium xenon gas mixture to specific interface conditions to simulate various operational modes of the solar dynamic power module. Inlet gas temperature, pressure, and flow rate were independently varied. A total of 58 simulated orbital cycles were completed during the test conduct period. The test hardware, execution of testing, test data, and post test inspections are described.

Sedgwick, Leigh M.↗
NASA NTRS1990

Measurement realities of current collection in dynamic space plasma environments

Theories which describe currents collected by conducting and non-conducting bodies immersed in plasmas have many of their concepts based upon the fundamentals of sheath-potential distributions and charged-particle behavior in superimposed electric and magnetic fields. Those current-collecting bodies (or electrodes) may be Langmuir probes, electric field detectors, aperture plates on ion mass spectrometers and retarding potential analyzers, or spacecraft and their rigid and tethered appendages. Often the models are incomplete in representing the conditions under which the current-voltage characteristics of the electrode and its system are to be measured. In such cases, the experimenter must carefully take into account magnetic field effects and particle anisotropies, perturbations caused by the current collection process itself and contamination on electrode surfaces, the complexities of non-Maxwellian plasma distributions, and the temporal variability of the local plasma density, temperature, composition and fields. This set of variables is by no means all-inclusive, but it represents a collection of circumstances guaranteed to accompany experiments involving energetic particle beams, plasma discharges, chemical releases, wave injection and various events of controlled and uncontrolled spacecraft charging. Here, an attempt is made to synopsize these diagnostic challenges and frame them within a perspective that focuses on the physics under investigation and the requirements on the parameters to be measured. Examples include laboratory and spaceborne applications, with specific interest in dynamic and unstable plasma environments.

Szuszczewicz, Edward P.↗
NASA NTRS1977

Plasma electron measurements in the outer Jovian magnetosphere

The existence of the plasma electrons in the outer Jovian magnetosphere reported by Intriligator and Wolfe (1974) is consistent with (1) the additional pressure needed to supplement the magnetospheric magnetic field in the outer magnetosphere so as to balance the solar wind and interplanetary magnetic field dynamic pressure across the magnetopause, (2) the drastic change in the plasma electron spectrum as soon as Pioneer 10 crossed the magnetopause from the magnetosheath into the magnetosphere, (3) the fact that the instrument aperture was at spacecraft ground, and (4) the fact that beyond about 2 AU the continuous observations of all ambient electron fluxes (solar wind electrons, secondary electrons, photoelectrons, etc.) are below the instrument threshold.

Intriligator, D. S.↗
NASA NTRS1999

Northern Forest Ecosystem Dynamics Using Coupled Models and Remote Sensing

Forest ecosystem dynamics modeling, remote sensing data analysis, and a geographical information system (GIS) were used together to determine the possible growth and development of a northern forest in Maine, USA. Field measurements and airborne synthetic aperture radar (SAR) data were used to produce maps of forest cover type and above ground biomass. These forest attribute maps, along with a conventional soils map, were used to identify the initial conditions for forest ecosystem model simulations. Using this information along with ecosystem model results enabled the development of predictive maps of forest development. The results obtained were consistent with observed forest conditions and expected successional trajectories. The study demonstrated that ecosystem models might be used in a spatial context when parameterized and used with georeferenced data sets.

Ranson, K. J.↗
NASA NTRS2004

Formation Flying: The Future of Remote Sensing from Space

Over the next two decades a revolution is likely to occur in how remote sensing of Earth, other planets or bodies, and a range of phenomena in the universe is performed from space. In particular, current launch vehicle fairing volume and mass constraints will continue to restrict the size of monolithic telescope apertures which can be launched to little or no greater size than that of the Hubble Space Telescope, the largest aperture currently flying in space. Systems under formulation today, such as the James Webb Space Telescope will be able to increase aperture size and, hence, imaging resolution, by deploying segmented optics. However, this approach is limited as well, by our ability to control such segments to optical tolerances over long distances with highly uncertain structural dynamics connecting them. Consequently, for orders of magnitude improved resolution as required for imaging black holes, imaging planets, or performing asteroseismology, the only viable approach will be to fly a collection of spacecraft in formation to synthesize a virtual segmented telescope or interferometer with very large baselines. This paper provides some basic definitions in the area of formation flying, describes some of the strategic science missions planned in the National Aeronautics and Space Administration, and identifies some of the critical technologies needed to enable some of the most challenging space missions ever conceived which have realistic hopes of flying.

Leitner, Jesse↗
NASA NTRS2004

Formation Flying: The Future of Remote Sensing from Space

Over the next two decades a revolution is likely to occur in how remote sensing of Earth, other planets or bodies, and a range of phenomena in the universe is performed from space. In particular, current launch vehicle fairing volume and mass constraints will continue to restrict the size of monolithic telescope apertures which can be launched to accommodate only slightly more performance capability than is achievable today, such as by the Hubble Space Telescope. Systems under formulation today, such as the James Webb Space Telescope will be able to increase aperture size and, hence, imaging resolution, by deploying segmented optics. However, this approach is limited as well, by ow ability to control such segments to optical tolerances over long distances with highly uncertain structural dynamics connecting them. Consequently, for orders of magnitude improved resolution as required for imaging black holes, imaging planets, or performing asteroseismology, the only viable approach will be to fly a collection of spacecraft in formation to synthesize a virtual segmented telescope or interferometer with very large baselines. This presentation describes some of the strategic science missions planned in the National Aeronautics and Space Administration, and identifies some of the critical technologies needed to enable some of the most challenging space missions ever conceived which have realistic hopes of flying.

Leitner, Jesse↗
NASA NTRS2007

Spacecraft Formation Flying: An Overview of Missions and Technologies

Over the next two decades a revolution is likely to occur in how remote sensing of Earth, other planets or bodies, and a range of phenomena in the universe is performed from space. In particular, current launch vehicle fairing volume and mass constraints will continue to restrict the size of monolithic telescope apertures which can be launched to accommodate only slightly more performance capability than is achievable today, such as by the Hubble Space Telescope. Systems under formulation today, such as the James Webb Space Telescope, will be able to increase aperture size and, hence, imaging resolution, by deploying segmented optics. However, this approach is limited as well, by our ability to control such segments to optical tolerances over long distances with highly uncertain structural dynamics connecting them. Consequently, for orders of magnitude improved resolution as required for imaging black holes, imaging planets, or performing asteroseismology, the only viable approach will be to fly a collection of spacecraft in formation to synthesize a virtual segmented telescope or interferometer with very large baselines. This presentation highlights some of the strategic science missions planned in the National Aeronautics and Space Administration, and identifies some of the critical technologies needed to enable some of the most challenging space missions ever conceived which have realistic hopes of flying.

Leitner, Jesse↗
NASA NTRS1995

A Low-Frequency Radio Sky Survey from Space

The frequency range below 30 MHz has not been explored with high angular resolution due to the opacity and refraction of the Earth's ionosphere. An interferometer array in space could provide high dynamic range images of the entire sky with arcminute angular resolution.

interferometer array space survey low frequency ap↗