Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissociation constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Determination of the rate constant for the reaction O + NO yields N + O2

A shock-tube technique was used to determine the rate constant for the reaction O + NO yields N + O2 in the 2500-4100 K range. Mixtures of NO, N2O, and an inert gas (Ar or Kr) were shock-heated, and the decay of infrared emission from the fundamental vibration-rotation band of NO at 5.3 microns was monitored. The N2O dissociates quickly to provide a source of O atoms for the above reaction. An expression for the rate constant is derived which fits these data and previous data at higher and lower temperatures.

Hanson, R. K.↗
DOE OSTI2022

Ultrafast infrared transient absorption spectroscopy of gas-phase Ni(CO) 4 photodissociation at 261 nm

Here, we employ ultrafast mid-infrared transient absorption spectroscopy to probe the rapid loss of carbonyl ligands from gas-phase nickel tetracarbonyl following ultraviolet photoexcitation at 261 nm. Here, nickel tetracarbonyl undergoes prompt dissociation to produce nickel tricarbonyl in a singlet excited state; this electronically excited tricarbonyl loses another CO group over tens of picoseconds. Our results also suggest the presence of a parallel, concerted dissociation mechanism to produce nickel dicarbonyl in a triplet excited state, which likely dissociates to nickel monocarbonyl. Mechanisms for the formation of these photoproducts in multiple electronic excited states are theoretically predicted with one-dimensional cuts through the potential energy surfaces and computation of spin–orbit coupling constants using equation of motion coupled cluster methods (EOM-CC) and coupled cluster theory with single and double excitations (CCSD). Bond dissociation energies are calculated with CCSD, and anharmonic frequencies of ground and excited state species are computed using density functional theory (DFT) and time-dependent density functional theory (TD-DFT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

An intercomparison technique for measuring thermal attachment cross sections and rate constants in distinct final channels

A new technique is introduced for comparing negative-ion signal rates in which a common ion is produced by dissociative attachment in a series of molecules. Measurements are carried out at electron energies less than 100 MeV and at resolutions of 6-8 MeV (FWHM). The technique is demonstrated by detection of the Cl(-) signal in CFCl3, CCl4, CF2Cl2, 1,1,2-C2Cl3F3, 1,1,1-C2Cl3F3 and C2Cl4. Measurements for 1,1,1-C2Cl3F3 show that there is a significant open channel, other than Cl(-) formation, which accounts for about 60 percent of negative-ion formation in thermal-multiple-collision (swarm) experiments. Channel cross sections and rate constants are given for the process Cl(-)/1,1,1-Cl2Cl3F3, as well as in C2Cl4, for the separate channels Cl(-)/C2Cl4 and C2Cl4(-)/C2Cl4.

Alajajian, S. H.↗
DOE OSTI2025

In-Situ Laser Diagnostics to Understand Plasma-Surface Interactions in Titanium Thin Film Deposition

During the current project period the following tasks were completed: (1) We demonstrated the feasibility of a new way of measuring CH3 radicals in a plasma environment using a single, femtosecond (fs) pulsed laser for the first time, in a CH4 + Ar flow. A single fs pulsed Ti:Sa laser was split into two beams and with beam conversion using crystals we generatedtwo beams of 275 nm and 205 nm. The 275 nm was used to predissociate the CH3 radicals to CH2+H, followed by 205 nm Two Photon Laser Induced Fluorescence (TALIF) detection of H atoms, with a 11 ns delay from 275 nm predissociation pulse. (2) We demonstrated preliminary CH3 concentration measurements with spatial (< 100 µm) and time resolution (< 10 ns) by image processing of H and Kr TALIF signal images. (3) The methodology to quantify CH3 concentrations was developed. (4) Preliminary measurements of laser dissociation cross sections for CH4 and CH3 to (CH3+H), and (CH2+H), respectively, were conducted. (5) 275 nm laser dissociation of CH4 is a multiphoton process, and the CH4 dissociation cross section is a more sensitive function of the laser pulse energy than CH4 concentration. In the coming months, we will make more precise measurements of the dissociation cross sections, 𝑘275, 𝐶𝐻4 and 𝑘275, 𝐶𝐻3, by varying the laser energy while keeping the flow composition and conditions constant. This will enable more precise quantification of CH3 radical concentrations. More detailed measurements of CH3 radicals will be conducted in the following months of 2025 (Sept-Dec) in a Titanium Isopropoxide (TIP) + H2 + Ar flow meant for pure phase Ti thin film deposition by Chemical Vapor Deposition (CVD). More precise measurements of 275 nm laser dissociation cross sections for CH4 (to CH3 + H) and CH3 (to CH2 + H) will be conducted in the future. Detailed 275 nm laser predissociation cross sections for CH4 and CH3 dissociation to (CH3+H), and (CH2+H), respectively, as a function of gas heating, plasma power, and laser pulse energy will be evaluated. This will enable quantification of CH3 concentrations in the precursor flow over a substrate with time and spatial resolution. Comparison of the concentrations with 2D numerical simulations can lead to understanding of plasma surface interactions during pure metallic Ti thin film deposition using environmentally safer non-halogen TIP precursor. Flow conditions for pure Ti thin film deposition using non-halogen precursor (TIP) will be identified in the following months.

Uddi, Mruthunjaya [Advanced Cooling Technologies, ↗
NASA NTRS1976

MCSCF potential energy surface for photodissociation of formaldehyde

The ground state potential energy surface for the dissociation of formaldehyde (H2CO to H2 and CO) is calculated with the ab initio MCSCF method with an extended (4-31G) basis set. The location, barrier height, and force constants of the transition state are determined, and the normal coordinate analysis is carried out. The calculated barrier height is 4.5 eV. Based on the calculated quantities, the detailed mechanism of the photochemical dissociation is discussed.

Jaffe, R. L.↗
DOE OSTI2025

Quantifying the Decomposition Kinetics of Linear C 2 –C 4 Perfluoroalkanes

The pyrolysis of C 2 –C 4 linear perfluoroalkanes was investigated using laser schlieren densitometry (LS) in a diaphragmless shock tube. Mixtures of 1, 2, and 4% perfluoroethane (PFE), perfluoropropane (PFP), and perfluorobutane (PFB) in excess krypton were shock-heated to 1400–2500 K at pressures of 60, 120, and 240 Torr. The initiation step for all perfluoroalkanes involved carbon–carbon bond fission. The rate constants for unimolecular decomposition were computed using microcanonical rate theory, and these rate constants were combined into a detailed chemical kinetic mechanism. For PFE and PFP, there was one dissociation channel, while PFB dissociated via two competing bond-fission reactions. The perfluoroalkyl radicals subsequently recombined or underwent further unimolecular decomposition. In conclusion, the kinetic model accurately simulated the density gradient profiles of all perfluoroalkanes.

Guzman, Eduardo H. [Brown Univ., Providence, RI (U↗
DOE OSTI2022

The role of energy transfer and competing bimolecular reactions in characterizing the unimolecular dissociations of allylic radicals

Resonantly stabilized radicals (RSR's) such as allylic radicals typically have bond energies exceeding 45 kcal/mol and are therefore reasonably long-lived up to quite high temperatures. Consequently, kinetics of the unimolecular dissociations and bimolecular reactions of these long-lived RSR's assume significance in high temperature chemically reacting systems such as in flames. Our recent analyses (J. Cho et al., Proc. Comb. Inst., 2022) of the uncertainty propagated by the energy transfer parameters for 1-methylallyl (1MA) dissociation to the laminar flame speed, indicates an intricate coupling between the kinetics of 1MA dissociation (chain propagation) and its reaction with H-atoms (chain-termination). Here, this work extends such analyses to other C 3 – C 5 allylic radicals: allyl, 2-methylallyl, 1,1-dimethylallyl, 1,2-dimethylallyl, and 1,3-dimethylallyl. Theoretical kinetics for the C 3 – C 4 allylic radicals were taken from prior literature studies (J.A. Miller et al., J. Phys. Chem., 2008; J. Cho et al., Proc. Comb. Inst., 2022; R.S. Tranter et al., Proc. Comb. Inst., 2017). Potential energy surfaces were newly computed for the dissociations of the larger C5 allylic radicals and the reactions of these radicals with H-atoms. These PES's were then used to calculate rate constants for the relevant unimolecular and bimolecular reactions. Energy transfer has a crucial role to play in these pressure-dependent reactions and therefore the present kinetics calculations relied on a-priori predictions of collisional energy transfer parameters to best characterize the branching between chain propagating unimolecular dissociations of these allylic radicals and chain terminating bimolecular reactions of these RSR's with H-atoms. Prompt dissociations are now established to be a universal feature of free radical dissociations. Here we have also characterized the propensity for prompt dissociations in these more-stable allylic RSR's and their role in combustion simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Energetic and Electronic Properties of AcX and LaX (X = O and F)

The bonding and spectroscopic properties of LaX and AcX (X = O and F) diatomic molecules were studied by highlevel ab initio CCSD(T) and SO-CASPT2 electronic structure calculations. Bond dissociation energies (BDEs) were calculated at the Feller−Peterson−Dixon (FPD) level. Potential energy curves and spectroscopic constants for the lowest-lying spin−orbit Ω states were obtained at the SO-CASPT2/aQ-DK level. A dense manifold of excited states was described for the monofluorides with the ground states well separated from the excited states. The spectroscopic parameters were in good agreement with those reported experimentally for LaO and LaF. For the diatomic molecules containing actinides, no experimental data of these parameters was found, but the results were consistent with other high-level calculations. The BDEs calculated at the FPD level were 791.3 (LaO), 705.2 (AcO), 650.0 (LaF), and 678.6 (AcF) kJ/ mol. The NBO analysis showed that the monofluorides are essentially ionic, which explains why the BDE(AcF) is higher than BDE(LaF); for the monoxides, covalent contributions involving the d orbitals of the metal and the p orbitals of the oxygen are stronger for LaO than AcO, which explains the higher BDE for LaO. Finally, the bond orders are predicted to be 2 for LaF and AcF, 3 for AcO, and higher than 3 for LaO.

Basis sets↗
DOE OSTI2022

Enhancing exciton diffusion by reducing energy disorder in organic solar cells

A highly crystalline, highly emissive, and wide-bandgap polymer AC174 with an extremely small Stokes shift is designed and synthesized in water, and is used to reduce system energetic disorder and increase the exciton diffusion length of the classical PM6:Y6 blend system. AC174 is incompatible with PM6 and Y6, improves molecular packing, and reduces system energetic disorder. The long-range Förster resonance energy transfer between the donor and acceptor is enhanced, and the exciton diffusion constant and exciton lifetime are increased, leading to a longer exciton diffusion length and more efficient exciton dissociation and charge generation. The addition of AC174 simultaneously improves the open-circuit voltage, short-circuit current density (J SC ) and fill factor of PM6:Y6 devices; especially the highest internal quantum efficiency approaches 100%, and the highest J SC is 28.4 mA cm –2 . Ternary devices with 5% AC174 in the donors achieve a power conversion efficiency of 17.2%, higher than those of the parent binary devices based on PM6:Y6 (15.9%) and AC174:Y6 (3.24%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Measurements of HO2 chemical kinetics with a new detection method

In this research program, HO2 was detected by the OH(A-X) photofragment from dissociative excitation of HO2 at 147 nm. This detection method was applied to measure the reaction rate constant of HO2 + O3. This reaction rate constant is needed for the understanding of stratospheric chemistry. Since C12 was used in the flow system, photoexcitation of C12 may produce fluorescence to interfere with the measurements. Thus, the photoexcitation process of C12 in the vacuum ultraviolet region was also examined in this research period using synchrotron radiation as a light source. The research results are summarized.

Lee, L. C.↗
DOE OSTI2021

Active Thermochemical Tables: the thermophysical and thermochemical properties of methyl, CH 3 , and methylene, CH 2 , corrected for nonrigid rotor and anharmonic oscillator effects

The thermophysical properties (isobaric heat capacity, entropy, enthalpy increment) of two prominent radicals, methyl, CH 3 , and methylene, CH 2 , were computed using the Nonrigid Rotor Anharmonic Oscillator (NRRAO) approach and compared to their RRHO counterparts, demonstrating significant differences between the results from the two approaches. Methylene presents a typical case in which the NRRAO thermophysical properties have significantly higher values than their RRHO counterparts at higher temperatures. In the case of methyl, the positive anharmonicity of the umbrella motion causes an opposite effect, and the NRRAO corrected thermophysical properties have lower values than their RRHO counterparts. The NRRAO corrected thermophysical properties, in turn, affect the resulting thermochemical properties. Here, two reactions important in combustion modelling were tested: the recombination of methyl radical with hydrogen atoms to form methane, and the recombination of two methyl radicals to form ethane. The related NRRAO equilibrium constants differ significantly from their RRHO analogs, and the consequences for chemical modelling are discussed. Also reported are the most current ATcT enthalpies of formation for CH n (n = 4-0) species and for C 2 H 6 , together with the tightly related sequential bond dissociation enthalpies along with the CHn series.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1988

Theoretical study of the scandium and yttrium halides

The X1Sigma(+) ground states and a3Delta excited states of the diatomic halides of Sc and Y are characterized theoretically, using the SDCI coupled-pair functional method and the state-averaged CASSCF method to determine the spectroscopic constants and related properties. The techniques employed are discussed, and the results are presented in extensive tables. The dissociation energies are given as D0 = 6.00 eV for ScF, 4.55 eV for ScCl, 3.90 eV for ScBr, 6.72 eV for YF, 5.36 eV for YCl, and 4.74 eV for YBr.

Langhoff, Stephen R.↗
NASA NTRS1951

General method and thermodynamic tables for computation of equilibrium composition and temperature of chemical reactions

A rapidly convergent successive approximation process is described that simultaneously determines both composition and temperature resulting from a chemical reaction. This method is suitable for use with any set of reactants over the complete range of mixture ratios as long as the products of reaction are ideal gases. An approximate treatment of limited amounts of liquids and solids is also included. This method is particularly suited to problems having a large number of products of reaction and to problems that require determination of such properties as specific heat or velocity of sound of a dissociating mixture. The method presented is applicable to a wide variety of problems that include (1) combustion at constant pressure or volume; and (2) isentropic expansion to an assigned pressure, temperature, or Mach number. Tables of thermodynamic functions needed with this method are included for 42 substances for convenience in numerical computations.

Huff, Vearl N↗
DOE OSTI2022

Hydrogen-Bonding Bottlebrush Networks: Self-Healing Materials from Super-Soft to Stiff

The impact of polymer architecture on network dynamics and self-healing is presented using bottlebrushes containing side chains that are end-functionalized with 2-ureido-4[1H]-pyrimidinone (UPy). The synthesis of these materials is straightforward through a three-step process: (1) synthesizing rubbery poly(4-methylcaprolactone) macromonomers (p4MCL–OH) with a norbornene-based initiator, (2) functionalizing the terminal hydroxyl group with UPy–isocyanate (p4MCL–UPy), and (3) statistically copolymerizing p4MCL–OH and p4MCL–UPy via ring-opening metathesis polymerization (ROMP) to form hydrogen-bonding bottlebrushes having a fraction (p) of side chains functionalized with UPy. Attaching UPy to the free end of bottlebrush side chains dilutes the impact of friction from complementary UPy interactions on segmental dynamics, leading to a much weaker dependence of the glass-transition temperature (T g ) on p than observed in linear analogues, while the activation energy to dissociate UPy–UPy bonds (41–47 kJ/mol) remains mostly unchanged. Longer side chains result in a competition between reducing T g and inducing entanglements that influence hydrogen-bonded network dynamics. Increasing the backbone length extends the sticky Rouse region without affecting the network modulus (G x ) or UPy–UPy dissociation time (τ s ). Gx scales linearly with p and ranges from 27 kPa to 1.6 MPa, while τs remains nearly constant in contrast to linear telechelic ionomers, implying a similar self-healability across bottlebrush networks containing different amounts of UPy. Furthermore, these stretchable networks with p ≤ 0.25 undergo self-healing upon repeated rupture and melt pressing at ≤100 °C while retaining similar tensile properties. In summary, decorating bottlebrush polymers with hydrogen bonds creates opportunities to independently manipulate associative network dynamics and mechanical moduli.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Self-deactivation of water vapor - Role of the dimer

A phenomenological multiple-relaxation theory of the deactivation rate constant for the nu-2 (1 - 0) bending mode of water vapor is presented which incorporates the role not only of the excited monomer but also of the bound molecular complex, in particular the dimer. The deactivation takes place by means of three parallel processes: (1) collisional deexcitation of the excited monomer, (2) a two-step reaction involving association and spontaneous redissociation of an H2O collision complex, and (3) spontaneous dissociation of the stably bound H2O dimer. Oxygen, but not nitrogen or argon, serves as an effective chaperon for the formation of the activated complex. This observation explains the impurity dependence of the self-deactivation rate constant of water vapor. Analysis of an ultrasonic absorption peak based on the third process yields values for the standard entropy and enthalpy of dissociation of the stably bound H2O dimer.

Zuckerwar, A. J.↗
NASA NTRS1988

Calculations of rate constants for the three-body recombination of H2 in the presence of H2

A new global potential energy hypersurface for H2 + H2 is constructed and quasiclassical trajectory calculations performed using the resonance complex theory and energy transfer mechanism to estimate the rate of three body recombination over the temperature range 100 to 5000 K. The new potential is a faithful representation of ab initio electron structure calculations, is unchanged under the operation of exchanging H atoms, and reproduces the accurate H3 potential as one H atom is pulled away. Included in the fitting procedure are geometries expected to be important when one H2 is near or above the dissociation limit. The dynamics calculations explicitly include the motion of all four atoms and are performed efficiently using a vectorized variable-stepsize integrator. The predicted rate constants are approximately a factor of two smaller than experimental estimates over a broad temperature range.

Schwenke, David W.↗
NASA NTRS1988

Calculations of rate constants for the three-body recombination of H2 in the presence of H2

A new global potential energy hypersurface for H2 + H2 is constructed and quasiclassical trajectory calculations performed using the resonance complex theory and energy transfer mechanism to estimate the rate of three body recombination over the temperature range 100 to 5000 K. The new potential is a faithful representation of ab initio electron structure calculations, is unchanged under the operation of exchanging H atoms, and reproduces the accurate H3 potential as one H atom is pulled away. Included in the fitting procedure are geometries expected to be important when one H2 is near or above the dissociation limit. The dynamics calculations explicitly include the motion of all four atoms and are performed efficiently using a vectorized variable-stepsize integrator. The predicted rate constants are approximately a factor of two smaller than experimental estimates over a broad temperature range.

Schwenke, David W.↗
DOE OSTI2020

Photodissociation dynamics of the tert -butyl perthiyl radical

Here, the photodissociation dynamics of the tert-butyl perthiyl (t-BuSS) radical are investigated by fast-beam coincidence translational spectroscopy. A fast (6 keV-8 keV) beam of neutral t-BuSS radicals is produced via photodetachment of the corresponding anion, followed by photodissociation at 248 nm (5.00 eV) or 193 nm (6.42 eV) and coincident detection of the neutral products. Photofragment mass and translational energy distributions are obtained at both wavelengths. At 248 nm, the dominant product channel (90%) is found to be S loss, with a product translational energy distribution that peaks close to the maximum available energy and an anisotropic photofragment angular distribution, indicating dissociation along a repulsive excited state. A minor channel (10%) leading to the formation of S 2 + t-Bu is also observed. At 193 nm, both two- and three-body dissociation are observed. The formation of S 2 + t-Bu is the dominant two-body product channel, with multiple electronic states of the S 2 molecule produced via excited-state dissociation processes. The formation of S + t-BuS is a minor two-body channel at this dissociation energy. The three-body channels are S 2 + H + isobutene, S 2 + CH 3 + propene, and S + SH + isobutene. The first two of these channels result from a sequential dissociation process in which the loss of S 2 from t-BuSS results in ground-state t-Bu with sufficient internal energy to undergo secondary fragmentation. The third three-body channel, S + SH + isobutene, is attributed to the loss of internally excited HS 2 from t-BuSS, which then rapidly dissociates to form S + SH in an asynchronous concerted dissociation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗