Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “disruptive technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Autonomous Flight Rules - A Concept for Self-Separation in U.S. Domestic Airspace

Autonomous Flight Rules (AFR) are proposed as a new set of operating regulations in which aircraft navigate on tracks of their choice while self-separating from traffic and weather. AFR would exist alongside Instrument and Visual Flight Rules (IFR and VFR) as one of three available flight options for any appropriately trained and qualified operator with the necessary certified equipment. Historically, ground-based separation services evolved by necessity as aircraft began operating in the clouds and were unable to see each other. Today, technologies for global navigation, airborne surveillance, and onboard computing enable the functions of traffic conflict management to be fully integrated with navigation procedures onboard the aircraft. By self-separating, aircraft can operate with more flexibility and fewer restrictions than are required when using ground-based separation. The AFR concept is described in detail and provides practical means by which self-separating aircraft could share the same airspace as IFR and VFR aircraft without disrupting the ongoing processes of Air Traffic Control.

Wing, David J.↗

Network Monitor and Control of Disruption-Tolerant Networks

For nearly a decade, NASA and many researchers in the international community have been developing Internet-like protocols that allow for automated network operations in networks where the individual links between nodes are only sporadically connected. A family of Disruption-Tolerant Networking (DTN) protocols has been developed, and many are reaching CCSDS Blue Book status. A NASA version of DTN known as the Interplanetary Overlay Network (ION) has been flight-tested on the EPOXI spacecraft and ION is currently being tested on the International Space Station. Experience has shown that in order for a DTN service-provider to set up a large scale multi-node network, a number of network monitor and control technologies need to be fielded as well as the basic DTN protocols. The NASA DTN program is developing a standardized means of querying a DTN node to ascertain its operational status, known as the DTN Management Protocol (DTNMP), and the program has developed some prototypes of DTNMP software. While DTNMP is a necessary component, it is not sufficient to accomplish Network Monitor and Control of a DTN network. JPL is developing a suite of tools that provide for network visualization, performance monitoring and ION node control software. This suite of network monitor and control tools complements the GSFC and APL-developed DTN MP software, and the combined package can form the basis for flight operations using DTN.

network monitor↗

Overview of Proposed ISRU Technology Development

ISRU involves any hardware or operation that harnesses and utilizes in-situ resources (natural and discarded) to create products and services for robotic and human exploration: Assessment of physical, mineral chemical, and volatile water resources, terrain, geology, and environment (orbital and local). Production of replacement parts, complex products, machines, and integrated systems from feedstock derived from one or more processed resources. Civil engineering, infrastructure emplacement, and structure construction using materials produced from in situ resources. Radiation shields, landing pads, roads, berms, habitats, etc. Generation and storage of electrical, thermal, and chemical energy with in situ derived materials. Solar arrays, thermal wadis, chemical batteries, etc. ISRU is a disruptive capability: Enables more affordable exploration than todays paradigm. Allows more sustainable architectures to be developed. Understand the ripple effect in the other Exploration Elements: MAV: propellant selection, higher rendezvous altitude (higher DV capable with ISRU propellants). EDL: significantly reduces required landed mass. Life Support: reduce amount of ECLSS closure, reduce trash mass carried through propulsive maneuvers. Power: ISRU drives electrical requirements, reactant and regeneration for fuel cells for landers, rovers, and habitat backup. Every Exploration Element except ISRU has some flight heritage (power, propulsion, habitats, landers, life support, etc.) ISRU will require a flight demonstration mission on Mars before it will be included in the critical path. Mission needs to be concluded at least 10 years before first human landed mission to ensure lessons learned can be incorporated into final design. ISRU Formulation team has generated a (still incomplete) list of over 75 technical questions on more than 40 components and subsystems that need to be answered before the right ISRU system will be ready for this flight demo.

Mars exploration↗

Study of techniques for redundancy verification without disrupting systems, phases 1-3

The problem of verifying the operational integrity of redundant equipment and the impact of a requirement for verification on such equipment are considered. Redundant circuits are examined and the characteristics which determine adaptability to verification are identified. Mutually exclusive and exhaustive categories for verification approaches are established. The range of applicability of these techniques is defined in terms of signal characteristics and redundancy features. Verification approaches are discussed and a methodology for the design of redundancy verification is developed. A case study is presented which involves the design of a verification system for a hypothetical communications system. Design criteria for redundant equipment are presented. Recommendations for the development of technological areas pertinent to the goal of increased verification capabilities are given.

Source record↗

Going beyond reliability to robustness and resilience in space systems

The words reliability, robustness, and resilience, are often used interchangeably to describe tough and dependable systems but the distinctions between them suggest how to design more serviceable space systems. Reliability is simply the quality of consistently performing well. A system that dependably meets its design requirements in the specified environments is reliable. The designers may not consider themselves responsible for failures under unanticipated conditions. Robustness is the capability of performing without failure under a wide range of conditions, which can go beyond the expected range to include possible off-nominal conditions. Resilience is the ability to recover from or adapt to damaging events, such as failures, accidents, external disruptions, and repurposing. Such changes are usually unanticipated. They often invalidate the usual operating assumptions and cause system failure. Reliability, robustness, and resilience describe dependable performance under increasingly difficult conditions, first the specified environment, then a wider possible environment, and finally unanticipated damaging events. These three are increasingly desirable and increasingly difficult to achieve. Engineering for resilience would design systems that can ignore or repair failures, survive accidents, and recover from disruptions. Increasing the resilience of space systems, the ability to perform after unanticipated events, would greatly increase space crew safety. Improving reliability and robustness can be done by dealing with known sources of problems, but improving resilience requires implementing a general approach to reducing the impact of unknown future events. Two contrasting approaches are reducing system complexity and adding supervisory control. The need for resilience has been claimed for decades but little has been accomplished. Systems designers assume that they understand requirements, technologies, designs, architectures, integration, testing, operations, and environments. The potential problems of changes, failures, accidents, unknown environments, and unknown unknowns are ignored. Systems designers are typically overconfident and ignore the need for robustness and resilience.

Harry W Jones↗

Xenon Acquisition Strategies for High-Power Electric Propulsion NASA Missions

The benefits of high-power solar electric propulsion (SEP) for both NASA's human and science exploration missions combined with the technology investment from the Space Technology Mission Directorate have enabled the development of a 50kW-class SEP mission. NASA mission concepts developed, including the Asteroid Redirect Robotic Mission, and those proposed by contracted efforts for the 30kW-class demonstration have a range of xenon propellant loads from 100's of kg up to 10,000 kg. A xenon propellant load of 10 metric tons represents greater than 10% of the global annual production rate of xenon. A single procurement of this size with short-term delivery can disrupt the xenon market, driving up pricing, making the propellant costs for the mission prohibitive. This paper examines the status of the xenon industry worldwide, including historical xenon supply and pricing. The paper discusses approaches for acquiring on the order of 10 MT of xenon propellant considering realistic programmatic constraints to support potential near-term NASA missions. Finally, the paper will discuss acquisitions strategies for mission campaigns utilizing multiple high-power solar electric propulsion vehicles requiring 100's of metric tons of xenon over an extended period of time where a longer term acquisition approach could be implemented.

Electric Propulsion↗

The SKY SHARK: an RPV Designed to Investigate the Pressure Distribution on a Lifting Surface

The objective was to design a remotely piloted vehicle which is capable of gathering in-flight pressure distribution data on a lifting test specimen, and then test the design by constructing a subscale demonstrator, to prove the flight worthiness of the concept. The technology demonstrator was scheduled for takeoff at approximately, 7:20 AM on Thursday April 27th. There was a light wind from the southeast. The plane was hand-launched and made an initial dip, most likely due to the poor trim conditions at launch. It then began to climb and bank into a left turn. The aircraft climbed to an altitude of approximately 150 ft and circled. The plane flew for several minutes and at times appeared to bump around, which was due to thermal activity disrupting the flight of the aircraft. The aircraft was brought slowly down in a power-off condition and glided in for a belly landing and landed without incident. Results of the flight test proved the general capability of the design to maintain flight stability throughout the take off, cruise, turning, and landing flight regimes. We were not able to demonstrate stability with the test specimen in place as the control surfaces designed to counteract the instabilities induced in the static system, winglets and ailerons, were not included.

Ziemba, Rob↗

BPTAP: A New Approach to IP over DTN

Traditional Internet protocols have been widely deployed for a variety of applications. However such protocols generally perform poorly in situations in which, round trip delays are very large (interplanetary distances) or . persistent connectivity is not always available (widely dispersed MANET). Delay/Disruption Tolerant Network (DTN) technology was invented to address these issues: (1) . Relay nodes "take custody" of blocks of network traffic on a hop-by -hop basis and retransmit them in cases of expected or unexpected link outage (2) Bundle lifetime may be configured for long round trip light times. BPTAP is novel by encapsulating Ethernet frames in BP

space links↗

NASA Tech Briefs, October 2011

Topics covered include: Laser Truss Sensor for Segmented Telescope Phasing; Qualifications of Bonding Process of Temperature Sensors to Deep-Space Missions; Optical Sensors for Monitoring Gamma and Neutron Radiation; Compliant Tactile Sensors; Cytometer on a Chip; Measuring Input Thresholds on an Existing Board; Scanning and Defocusing Properties of Microstrip Reflectarray Antennas; Cable Tester Box; Programmable Oscillator; Fault-Tolerant, Radiation-Hard DSP; Sub-Shot Noise Power Source for Microelectronics; Asynchronous Message Service Reference Implementation; Zero-Copy Objects System; Delay and Disruption Tolerant Networking MACHETE Model; Contact Graph Routing; Parallel Eclipse Project Checkout; Technique for Configuring an Actively Cooled Thermal Shield in a Flight System; Use of Additives to Improve Performance of Methyl Butyrate-Based Lithium-Ion Electrolytes; Li-Ion Cells Employing Electrolytes with Methyl Propionate and Ethyl Butyrate Co-Solvents; Improved Devices for Collecting Sweat for Chemical Analysis; Tissue Photolithography; Method for Impeding Degradation of Porous Silicon Structures; External Cooling Coupled to Reduced Extremity Pressure Device; A Zero-Gravity Cup for Drinking Beverages in Microgravity; Co-Flow Hollow Cathode Technology; Programmable Aperture with MEMS Microshutter Arrays; Polished Panel Optical Receiver for Simultaneous RF/Optical Telemetry with Large DSN Antennas; Adaptive System Modeling for Spacecraft Simulation; Lidar-Based Navigation Algorithm for Safe Lunar Landing; Tracking Object Existence From an Autonomous Patrol Vehicle; Rad-Hard, Miniaturized, Scalable, High-Voltage Switching Module for Power Applications; and Architecture for a 1-GHz Digital RADAR.

Source record↗

Crew Performance Support System to Aid in Anomaly Resolution: Concept of Operations

As missions progress into deep space, communication delays and disruptions will disenable the crew’s reliance on Earth experts. There are also limitations in the amount of data that can be downlinked to the ground. It is prudent to assume that critical, complex vehicle or habitat sub-systems will malfunction at a time when a lunar or Mars’ crew cannot rely on the Earth-Support team to detect, diagnose and resolve the problem and it is impractical to expect a small crew to step-in with the same level of expertise as 50+ authorities. The crew will need novel processes and advanced technological support to independently identify and resolve safety- and time-critical anomalies. That a self-reliant crew is unable to respond appropriately to time-critical anomalies is a significant risk to crew safety and mission success. This risk is driven by several factors; novel and unanticipated anomalies would not have been trained pre-flight, the crew could forget their pre-flight training or spaceflight stressors could impair the crew’s problem-solving ability. At last year’s IWS, Beard reported that a single spaceflight stressor (elevated CO2) could undermine the crew’s ability to independently respond to emergencies. Concept of Operations (ConOps) provide a common view of future system functions to all stakeholders. For the current project, a ConOps was developed that describes the operational processes, practices and capabilities needed by a crew of astronauts on deep space missions to autonomously respond to anticipated and unanticipated anomalies. It is crucial to recognize that, as of August 2018 existing technologies are unable to effectively support crew anomaly response to unanticipated events. “Intelligent technology” has not reached a maturity level that permits generalizing a solution to novel situations. For example, to train intelligent technology requires volumes of data that do not exist. The complexities involved in a manned mission to Mars cannot be compared to sending rovers to Mars using scripted software. This ConOps proposes a Crew Performance Support System (CPSS) that will push NASA and its industry partners toward what will be required for a safe and successful manned mission to Mars. Anomaly resolution during a deep space mission will take place within a dynamic, or changing, context. The figure to the left shows five broad contextual variables: the organizational culture, mission context, system characteristics, team characteristics and individual characteristics. The yellow arrow indicates that spaceflight and task-related stressors can affect system, team and individual crewmember characteristics and therefore anomaly response potential. The figure depicts a protective umbrella of Human-System Integration (HSI) principles that should be instituted during CPSS development including a balanced workload, shared situation awareness and building an appropriate level of trust in the automation. The figure also depicts two interrelated and cooperative components, an HSI Data System and other Enabling Capabilities will be required to support crew anomaly response and Earth-Support situation awareness. As we journey from ISS to Gateway to Mars, multiple, simultaneous and integrated research and development efforts (i.e., support systems co-evolution) must be implemented to meet the problem-solving challenges a self-reliant crew will face on a Mars’ mission. The crossovers between the capabilities are just as important as the discrete capabilities themselves. As the capabilities mature, the lines between the support subdomains will blur and an integrated system will emerge. The ConOps summarizes current knowledge about how highly trained people solve anomalies in safety- and time-critical situations, describes a group of capabilities that could help to reduce the extant risk and documents requirements levied on additional systems that provides critical inputs to the CPSS. Scenarios are used to promote a shared understanding of processes, practices and technological goals needed for safe and productive manned missions beyond LEO.

HSIA risk↗

Seal Technology for Liquid Oxygen (LOX) Turbopumps

Two types of advanced seals for liquid oxygen (LOX) turbopumps were investigated. One was a spiral-groove face seal whose function is to seal high-pressure LOX at the impeller end of the turbopump. The other was a floating-ring, Rayleigh-step, helium buffered seal used to prevent LOX ingress to the turbine side of the unit. For each seal type, two sizes were investigated (50 and 20 mm). A turbine-driven test rig was designed and manufactured, and a test program was completed on the 50 mm floating-ring, Rayleigh-step, helium buffered seal. Significant results were: vaporization in the flow path could cause failure by overheating; therefore, the spiral-groove pumping portion of the seal that provides the fluid film must circulate fluid without disruption if vaporization occurs in the sealing dam. This is successfully accomplished by a pressure-balanced spiral-groove concept that is described. The spiral-groove configuration is affected by turbulence in the fluid film and pressure drops due to fluid inertia at sudden contractions. The net results of these effects are deep grooves, large operating films, and high power loss when compared against seals operating with laminar films. Turbulence and inertia are induced by the high-density and low-viscosity characteristics of LOX. The program clearly pointed out the need to consider system environmental factors such as thermal and centrifugal distortions and rotor vibrations in the seal design.

Shapiro, Wilbur↗

Delay and Disruption Tolerant Networking MACHETE Model

To verify satisfaction of communication requirements imposed by unique missions, as early as 2000, the Communications Networking Group at the Jet Propulsion Laboratory (JPL) saw the need for an environment to support interplanetary communication protocol design, validation, and characterization. JPL's Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE), described in Simulator of Space Communication Networks (NPO-41373) NASA Tech Briefs, Vol. 29, No. 8 (August 2005), p. 44, combines various commercial, non-commercial, and in-house custom tools for simulation and performance analysis of space networks. The MACHETE environment supports orbital analysis, link budget analysis, communications network simulations, and hardware-in-the-loop testing. As NASA is expanding its Space Communications and Navigation (SCaN) capabilities to support planned and future missions, building infrastructure to maintain services and developing enabling technologies, an important and broader role is seen for MACHETE in design-phase evaluation of future SCaN architectures. To support evaluation of the developing Delay Tolerant Networking (DTN) field and its applicability for space networks, JPL developed MACHETE models for DTN Bundle Protocol (BP) and Licklider/Long-haul Transmission Protocol (LTP). DTN is an Internet Research Task Force (IRTF) architecture providing communication in and/or through highly stressed networking environments such as space exploration and battlefield networks. Stressed networking environments include those with intermittent (predictable and unknown) connectivity, large and/or variable delays, and high bit error rates. To provide its services over existing domain specific protocols, the DTN protocols reside at the application layer of the TCP/IP stack, forming a store-and-forward overlay network. The key capabilities of the Bundle Protocol include custody-based reliability, the ability to cope with intermittent connectivity, the ability to take advantage of scheduled and opportunistic connectivity, and late binding of names to addresses.

Segui, John S.↗

Large-Scale Experimental Planetary Science Meets Planetary Defense: Deorbiting an Asteroidal Satellite

Other than remote-sensing and spacecraft-derived data, the only information that exists regarding the physical and chemical properties of asteroids is that inferred through calculations, numerical simulations, extrapolation of experiments, and meteorite studies. Our understanding of the dynamics of accretion of planetesimals, collisional disruption of asteroids, and the macroscopic, shock-induced modification of the surfaces of such small objects is also, for the most part, founded on similar inferences. While considerable strides have been made in improving the state of asteroid science, too many unknowns remain to assert that we understand the parameters necessary for the more practical problem of deflecting an asteroid or asteroid pair on an Earth-intersecting trajectory. Many of these deficiencies could be reduced or eliminated by intentionally deorbiting an asteroidal satellite and monitoring the resulting collision between it and the primary asteroid, a capability that is well within the limitations of current technology.

Cintala, M. J.↗

Asteroid Retrieval Mission Concept - Trailblazing Our Future in Space and Helping to Protect Us from Earth Impactors

The Asteroid Retrieval Mission (ARM) is a robotic mission concept with the goal of returning a small (~7 m diameter) near-Earth asteroid (NEA), or part of a large NEA, to a safe, stable orbit in cislunar space using a 50 kW-class solar electric propulsion (SEP) robotic spacecraft (~40 kW available to the electric propulsion system) and currently available technologies. The mass of the asteroidal material returned from this mission is anticipated to be up to 1,000 metric tons, depending on the orbit of the target NEA and the thrust-to-weight and control authority of the SEP spacecraft. Even larger masses could be returned in the future as technological capability and operational experience improve. The use of high-power solar electric propulsion is the key enabling technology for this mission concept, and is beneficial or enabling for a variety of space missions and architectures where high-efficiency, low-thrust transfers are applicable. Many of the ARM operations and technologies could also be applicable to, or help inform, planetary defense efforts. These include the operational approaches and systems associated with the NEA approach, rendezvous, and station-keeping mission phases utilizing a low-thrust, high-power SEP spacecraft, along with interacting with, capturing, maneuvering, and processing the massive amounts of material associated with this mission. Additionally, the processed materials themselves (e.g., high-specific impulse chemical propellants) could potentially be used for planetary defense efforts. Finally, a ubiquitous asteroid retrieval and resource extraction infrastructure could provide the foundation of an on call planetary defense system, where a SEP fleet capable of propelling large masses could deliver payloads to deflect or disrupt a confirmed impactor in an efficient and timely manner.

Mazanek, Daniel D.↗

The Impacts of Microphysics and Planetary Boundary Layer Physics on Model Simulations of U.S. Deep South Summer Convection

Convection-allowing numerical weather simula- tions have often been shown to produce convective storms that have significant sensitivity to choices of model physical parameterizations. Among the most important of these sensitivities are those related to cloud microphysics, but planetary boundary layer parameterizations also have a significant impact on the evolution of the convection. Aspects of the simulated convection that display sensitivity to these physics schemes include updraft size and intensity, simulated radar reflectivity, timing and placement of storm initi- ation and decay, total storm rainfall, and other storm features derived from storm structure and hydrometeor fields, such as predicted lightning flash rates. In addition to the basic parameters listed above, the simulated storms may also exhibit sensitivity to im- posed initial conditions, such as the fields of soil temper- ature and moisture, vegetation cover and health, and sea and lake water surface temperatures. Some of these sensitivities may rival those of the basic physics sensi- tivities mentioned earlier. These sensitivities have the potential to disrupt the accuracy of short-term forecast simulations of convective storms, and thereby pose sig- nificant difficulties for weather forecasters. To make a systematic study of the quantitative impacts of each of these sensitivities, a matrix of simulations has been performed using all combinations of eight separate microphysics schemes, three boundary layer schemes, and two sets of initial conditions. The first version of initial conditions consists of the default data from large-scale operational model fields, while the second features specialized higher- resolution soil conditions, vegetation conditions and water surface temperatures derived from datasets created at NASA's Short-term Prediction and Operational Research Tran- sition (SPoRT) Center at the National Space Science and Technology Center (NSSTC) in Huntsville, AL. Simulations as outlined above, each 48 in number, were conducted for five midsummer weakly sheared coastal convective events each at two sites, Mobile, AL (MOB) and Houston, TX (HGX). Of special interest to operational forecasters at MOB and HGX were accuracy of timing and placement of convective storm initiation, reflectivity magnitudes and coverage, rainfall and inferred lightning threat.

McCaul, Eugene W., Jr.↗

Space Resources and Mining: Current Objectives, Plans, and Missions

Why are Space Resources and Their Use Important? There are many reasons why people and nations want to explore space, and there are many different ways in which space can be explored. A critical interface linking both the ‘why’ and the ‘how’ of space exploration is the identification, extraction, and use of resources in space. In both NASA’s Journey to Mars: Pioneering Next Steps in Space Exploration released in October of 2015 and the Global Exploration Roadmap released in August 2013, the ability to find, quantify, extract, process, and use space resources was identified as a critical objective by NASA and over 14 other space agencies for achieving affordable and sustainable human exploration beyond Earth’s orbit, encouraging and creating new commercial entities and markets based on space activities, and increasing the terrestrial economy and quality-of-life benefits for all humankind. Robotic and especially human space exploration up to this point in time can be considered to be ‘Earth reliant’ in that everything needed to support and enable the mission is launched from Earth. The past Apollo missions to the Moon and the International Space Station currently in orbit above the Earth all rely on hardware, habitats, power, transportation, and life support consumables sent from Earth to keep the crew alive and working. As the distance from Earth increases, the cost of transportation and the risks due to failures and logistics disruptions also increases. By using resources found at the site of exploration to make mission critical consumables (such as propellants, fuel cell reactants and life support commodities), spare parts, and infrastructure needed to support surface activities (such as landing pads, roads, habitats/shelters, and power/thermal systems) commonly referred to as In Situ Resource Utilization, a significant amount of launch mass and cost can be saved and risk reduced. The ability to do these things also changes how exploration is performed from Earth Reliant to NASA’s goal of ‘Earth Independent’ exploration. After the US Apollo program was over, people began to recognize that it had been an inspiration for a generation of young students to go into Science, Technology, Engineering and Math (STEM) fields, and that the US industry and economy had significantly grown and lived off these students and the technological advances made to achieve these missions for decades. Space exploration should no longer be focused solely on scientific advancement or national pride, but for economic growth and population standard of living advancement. Considering the economic value of human exploration and how it could expand the economy of the US was brought to full light in a speech by John Marburger, the director of US Office of Science and Technology Policy under George W Bush at the Goddard Symposium in 2006. In his speech he highlighted that the ultimate goal was not to just Explore space but to Use space for the benefit of mankind. He further stated that the use of off-planet resources, in this case from the Moon, should be a critical architectural consideration for human space exploration to make it more affordable and sustainable. This could be achieved in two ways. The first is to start by encouraging and commercializing the extraction and production of transportation and life support related products from space resources, which could than lead to other resource uses once an affordable transportation architecture is established. The second is to encourage the spin-in of terrestrial technologies into space applications and spin-off of space technologies into terrestrial applications to increase the efficiency and profitability of terrestrial industries.

Sanders, Gerald B.↗

ldentifying Episodes of Earth Science Phenomena Using a Big-Data Technology

A significant portion of Earth Science investigations is phenomenon- (or event-) based, such as the studies of Rossby waves, volcano eruptions, tsunamis, mesoscale convective systems, and tropical cyclones. However, except for a few high-impact phenomena, e.g. tropical cyclones, comprehensive records are absent for the occurrences or events of these phenomena. Phenomenon-based studies therefore often focus on a few prominent cases while the lesser ones are overlooked. Without an automated means to gather the events, comprehensive investigation of a phenomenon is at least time-consuming if not impossible. We have constructed a prototype Automated Event Service (AES) system that is used to methodically mine custom-defined events in the reanalysis data sets of atmospheric general circulation models. Our AES will enable researchers to specify their custom, numeric event criteria using a user-friendly web interface to search the reanalysis data sets. Moreover, we have included a social component to enable dynamic formation of collaboration groups for researchers to cooperate on event definitions of common interest and for the analysis of these events. An Earth Science event (ES event) is defined here as an episode of an Earth Science phenomenon (ES phenomenon). A cumulus cloud, a thunderstorm shower, a rogue wave, a tornado, an earthquake, a tsunami, a hurricane, or an El Nino, is each an episode of a named ES phenomenon, and, from the small and insignificant to the large and potent, all are examples of ES events. An ES event has a duration (often finite) and an associated geo-location as a function of time; it's therefore an entity embedded in four-dimensional (4D) spatiotemporal space. Earth Science phenomena with the potential to cause massive economic disruption or loss of life often rivet the attention of researchers. But, broader scientific curiosity also drives the study of phenomena that pose no immediate danger, such as land/sea breezes. Due to Earth System's intricate dynamics, we are continuously discovering novel ES phenomena. We generally gain understanding of a given phenomenon by observing and studying individual events. This process usually begins by identifying the occurrences of these events. Once representative events are identified or found, we must locate associated observed or simulated data prior to commencing analysis and concerted studies of the phenomenon. Knowledge concerning the phenomenon can accumulate only after analysis has started. However, as mentioned previously, comprehensive records only exist for a very limited set of high-impact phenomena; aside from these, finding events and locating associated data currently may take a prohibitive amount of time and effort on the part of an individual investigator. The reason for the lack of comprehensive records for most of the ES phenomena is mainly due to the perception that they do not pose immediate and/or severe threat to life and property. Thus they are not consistently tracked, monitored, and catalogued. Many phenomena even lack precise and/or commonly accepted criteria for definitions. Moreover, various Earth Science observations and data have accumulated to a previously unfathomable volume; NASA Earth Observing System Data Information System (EOSDIS) alone archives several petabytes (PB) of satellite remote sensing data, which are steadily increasing. All of these factors contribute to the difficulty of methodically identifying events corresponding to a given phenomenon and significantly impede systematic investigations. We have not only envisioned AES as an environment for identifying customdefined events but also aspired for it to be an interactive environment with quick turnaround time for revisions of query criteria and results, as well as a collaborative environment where geographically distributed experts may work together on the same phenomena. A Big Data technology is thus required for the realization of such a system. In the following, we first introduce the technology selected for AES in the next section. We then demonstrate the utility of AES using a use case, Blizzard, before we conclude.

Kuo, Kwo-Sen↗

Current limiting remote power control module

The power source for the Space Station Freedom will be fully utilized nearly all of the time. As such, any loads on the system will need to operate within expected limits. Should any load draw an inordinate amount of power, the bus voltage for the system may sag and disrupt the operation of other loads. To protect the bus and loads some type of power interface between the bus and each load must be provided. This interface is most crucial when load faults occur. A possible system configuration is presented. The proposed interface is the Current Limiting Remote Power Controller (CL-RPC). Such an interface should provide the following power functions: limit overloading and resulting undervoltage; prevent catastrophic failure and still provide for redundancy management within the load; minimize cable heating; and provide accurate current measurement. A functional block diagram of the power processing stage of a CL-RPC is included. There are four functions that drive the circuit design: rate control of current; current sensing; the variable conductance switch (VCS) technology; and the algorithm used for current limiting. Each function is discussed separately.

Hopkins, Douglas C.↗