Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “design guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

MC Formula Protocol for H35HF Fueling

A publicly available and verified high-flow fueling protocol for H35 medium-duty (MD) and heavy-duty (HD) hydrogen-powered buses and trucks does not exist. This could lead to transit agencies needing to select suppliers for purchase of new fleet vehicles, and to multiple providers responding with incompatible vehicle designs in the future. With the expansion of MD/HD vehicles using 35 MPa storage, there will be a need for publicly accessible H35HF stations, and these will require the use of a standardized prescriptive fueling protocol. The development of a fully tested and validated H35 high-flow (H35HF) MC Formula fueling protocol for MD and HD buses and trucks can provide guidelines to design H35 stations and vehicles, enable other manufacturers and vehicle original equipment manufacturers (OEMs) to enter this space, and ultimately accelerate to popularize the hydrogen market.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2021

Improved Acquisition and Reconstruction for Wavelength-Resolved Neutron Tomography

Wavelength-resolved neutron tomography (WRNT) is an emerging technique for characterizing samples relevant to the materials sciences in 3D. WRNT studies can be carried out at beam lines in spallation neutron or reactor-based user facilities. Because of the limited availability of experimental time, potential imperfections in the neutron source, or constraints placed on the acquisition time by the type of sample, the data can be extremely noisy resulting in tomographic reconstructions with significant artifacts when standard reconstruction algorithms are used. Furthermore, making a full tomographic measurement even with a low signal-to-noise ratio can take several days, resulting in a long wait time before the user can receive feedback from the experiment when traditional acquisition protocols are used. In this paper, we propose an interlaced scanning technique and combine it with a model-based image reconstruction algorithm to produce high-quality WRNT reconstructions concurrent with the measurements being made. The interlaced scan is designed to acquire data so that successive measurements are more diverse in contrast to typical sequential scanning protocols. The model-based reconstruction algorithm combines a data-fidelity term with a regularization term to formulate the wavelength-resolved reconstruction as minimizing a high-dimensional cost-function. Using an experimental dataset of a magnetite sample acquired over a span of about two days, we demonstrate that our technique can produce high-quality reconstructions even during the experiment compared to traditional acquisition and reconstruction techniques. In summary, the combination of the proposed acquisition strategy with an advanced reconstruction algorithm provides a novel guideline for designing WRNT systems at user facilities.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

A Compact, Single Stage, >1 kV Medium-Voltage Line Impedance Stabilization Network

This paper presents the design of a single-phase, single-stage line impedance stabilization network (LISN) for medium-voltage (MV) applications. More than 1 kV rated widebandgap (WBG) power semiconductor switches are increasingly utilized in new, emerging power electronics energy systems to improve power density and efficiency. However, due to inherently fast-switching speeds, WBG switch modules emit considerable electromagnetic interference (EMI) (e.g., common mode (CM) or differential mode (DM)). State-of-the-art offers standardized LISN solutions to validate and certify the new energy system for electromagnetic compatibility (EMC). However, most are for low voltage applications (i.e., < 1 kV). MV LISNs (i.e., > 1 kV) are rare until recently and literature does not provide sufficient guidelines for designing and characterizing such devices. It has been a critical challenge for many scientists and engineers to reliably certify the emerging MV energy systems (e.g., electric ships and aircraft). This paper addresses such a technology gap. Specifically, a CISPR 16-1-2 compliant 50Ω/50μH LISN with 1.5kV, 75A and 30MHz measurement capability has been proposed. Detailed performance study versus non-linear parasitic parameters variations in MV inductors and capacitors have been done. Based on new understandings, novel techniques to intuitively mitigate unwanted parasitic have been proposed to develop the proposed LISN successfully. Thorough characterization of important LISN parameters are presented and factors influencing them are analyzed. A rigorous analysis, experimental tests, and in-depth comparisons over state-of-the-art have been made to validate the effectiveness. This is done through the state-of-the-art 300kVA MV EMI testbed.

42 ENGINEERING↗
DOE OSTI2020

Harnessing biomimetic cryptic bonds to form self-reinforcing gels

Cryptic sites, which lay hidden in folded biomolecules, become exposed by applied force and form new bonds that reinforce the biomaterial. While these binding interactions effectively inhibit mechanical deformation, there are few synthetic materials that harness mechano-responsive cryptic sites to forestall damage. Here, we develop a computational model to design polymer gels encompassing cryptic sites and a lower critical solution temperature (LCST). LCST gels swell with a decrease in temperature, thereby generating internal stresses within the sample. The gels also encompass loops held together by the cryptic sites, as well as dangling chains with chemically reactive ends. A decrease in temperature or an applied force causes the loops to unfold and expose the cryptic sites, which then bind to the dangling chains. We show that these binding interactions act as “struts” that reinforce the network, as indicated by a significant decrease in the volume of the gel (from 44% to 80%) and shifts in the volume phase transition temperature. Once the temperature is increased or the deformation is removed, the latter “cryptic bonds” are broken, allowing the loops to refold and the gel to return to its original state. These findings provide guidelines for designing polymer networks with reversible, mechano-responsive bonds, which allow gels to undergo a self-stiffening behavior in response to a temperature-induced internal stress or external force. When applied as a coating, these gels can prevent the underlying materials from undergoing damage and thus, extend the lifetime of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Computational Design of Metal-Exchanged MFI Zeolites for Coupling CO 2 –Ethylene to Form Acrylic Acid

The production of acrylic acid by coupling CO 2 and ethylene is highly desirable, as it uses a C 1 molecule to introduce the carboxylic group into a large commodity chemical, forming an unsaturated carboxylic acid. Molecular complexes have been used as catalysts in the literature for this reaction; however, these homogeneous studies were all limited by low activity and stability, and efficient heterogeneous catalysts remain to be explored. Here, we report density functional theory calculations, through which we investigated metal-exchanged MFI zeolites with metals from 3d, 4d, and 5d series for this reaction. Screening of reaction thermodynamics has shown that Sc, Y, Cr, Mo, W, Mn, Tc, and Re dispersed into MFI zeolites are potential catalysts. We further calculated the activation barriers for the β–H transfer, a key elementary step that normally determines the overall rates, and found the lowest barrier over Sc- and Y-MFI; such a feasible kinetics is attributed to the low electronegativity of Sc and Y that strongly affects the nature of the transition states and the charge redistribution during the β–H transfer. In conclusion, this work thus provides guidelines for designing a zeolite-based catalyst for this valuable reaction and identifies promising metal centers to be used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Strain Field Around Individual Dislocations Controls Failure

Understanding material failure on a fundamental level is a key aspect in the design of robust structural materials, especially for metals and alloys capable to undergo plastic deformation. In the last decade, significant progress is made in quantifying the stresses associated with failure in both experiments and simulations. Nonetheless, the processes occurring on the most essential level of individual dislocations that govern semi-brittle and ductile fracture are still experimentally not accessible, limiting the failure prediction capabilities. Therefore, in the present work, a one-of-a-kind nanoscale fracture experiment is conducted on a single crystalline Cr bending beam in situ in the transmission electron microscope and for the first time quantify the transient strains around individual dislocations, as well as of the whole dislocation network during crack opening. The results reveal the importance of both pre-existing and newly emitted dislocations for crack-tip shielding via their intrinsic strain field and provide guidelines to design more damage tolerant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Crystalline Mesoporous Complex Oxides: Porosity-Controlled Electromagnetic Response

A colloidal--amphiphile--templated growth is developed to synthesize mesoporous complex oxides with highly crystalline frameworks. Organosilane-containing colloidal templates can convert into thermally stable silica that prevents the overgrowth of crystalline grains and the collapse of the mesoporosity. Using ilmenite CoTiO 3 as an example, the high crystallinity and the extraordinary thermal stability of its mesoporosity are demonstrated at 800 °C for 48 h under air. This synthetic approach is general and applicable to a series of complex oxides that are not reported with mesoporosity and high crystallinity, such as NiTiO 3 , FeTiO 3 , ZnTiO 3 , Co 2 TiO 4 , Zn 2 TiO 4 , MgTi 2 O 5 , and FeTi 2 O 5 . Those novel materials make it possible to build up correlations between mesoscale porosity and surface-sensitive physicochemical properties, e.g., electromagnetic response. For mesoporous CoTiO 3 , there is a 3 K increase of its antiferromagnetic ordering temperature, compared with that of nonporous one. Lastly, this finding provides a general guideline to design mesoporous complex oxides that allow exploring their unique properties different from bulk materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

District heating utilizing waste heat of a data center: High-temperature heat pumps

Data centers are energy-intensive facilities with substantial low-grade waste heat. High-temperature heat pumps can be critical in boosting the data center’s waste heat for district heating, improving the system-level energy efficiency of data centers, and reducing CO 2 emissions in district heating. This study built thermodynamic models to assess high-temperature heat pumps with six configurations using low global warming potential refrigerants to supply heat up to 120 °C. The heat pump configurations include single-stage or two-stage cycles with advanced components, such as internal heat exchanger, economizer, flash tank, or parallel compressor. The refrigerants include R1234ze(Z), R1233ed(E), R1224yd(Z), R600, and R600a, and R245fa is used as a reference. A case study was carried out to recover the waste heat from the Frontier high-performance computing data center and provide hot water for district heating at the US Department of Energy’s Oak Ridge National Laboratory campus. The optimized performance of high-temperature heat pumps is characterized with various effectiveness of internal heat exchangers, and the operating parameters of economizer or flash tank, as well as their combination. The results show that the configurations of two-stage cycles with internal heat exchanger + flash tank and internal heat exchanger + economizer/parallel-compressor provide the highest coefficient of performance under scenarios of the maximum allowable value and a fixed value (0.3) of the internal heat exchangers’ effectiveness, respectively. R1234ze(Z) and R600a are the most promising refrigerants, considering trade-offs between the coefficient of performance and the volumetric heating capacity. The single-stage cycle with internal heat exchanger + economizer/parallel-compressor using R1234ze(Z) is recommended for utilizing Fronter’s waste heat in district heating. A one mega-watt high-temperature heat pump will reduce 33,100–33,200 metric tons of CO2 emission annually, corresponding to 85.4 %–85.6 % of equivalent CO2 emissions from natural gas boilers. Here, this study provides good guidelines for designing and deploying high-temperature heat pumps to support sustainable data centers and decarbonize district heating in the US.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Single-atom catalysts with anionic metal centers: promising electrocatalysts for the oxygen reduction reaction and beyond

Ongoing efforts to develop single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) typically focus on SACs with cationic metal centers, while SACs with anionic metal centers (anionic SACs) have been generally neglected. However, anionic SACs may offer excellent active sites for ORR, since anionic metal centers could facilitate the activation of O2 by back donating electrons to the antibonding orbitals of O2. In this work, we propose a simple guideline for designing anionic SACs: the metal centers should have larger electronegativity than the surrounding atoms in the substrate on which the metal atoms are supported. By means of density functional theory (DFT) simulations, we identified 13 anionic metal centers (Co, Ni, Cu, Ru, Rh, Pd, Ag, Re, Os, Ir, Pt, Au, and Hg) dispersed on pristine or defective antimonene substrates as new anionic SACs, among which anionic Au and Co metal centers exhibit limiting potentials comparable to, or even better than, conventional Pt-based catalysts towards ORR. We also found that anionic Os and Re metal centers on the defective antimonene can electrochemically catalyze the nitrogen reduction reaction (NRR) with a limiting potential close to that of stepped Ru(0001). Overall, our work shows promise towards the rational design of anionic SACs and their utility for applications as electrocatalysts for ORR and other important electrochemical reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of rejuvenation modes on the microstructures and mechanical properties of metallic glasses

This study systematically investigates the effects of three rejuvenation modes, namely biaxial loading, thermal pressure loading, and cryogenic thermal cycling, on the microstructures and mechanical properties of Cu 64 Zr 36 metallic glasses (MGs) using molecular dynamics (MD) simulations. The simulation results demonstrate that biaxial tension application during loading results in a rejuvenated glassy state with high strength. Specifically, we find that the yield stress, Young's modulus, and shear modulus of the rejuvenated glass obtained by biaxial tensile loading decreased by 2.8%, 2.1%, and 2.7%, respectively, compared to an as-cast MG reference. We also find that MGs achieve the greatest degree of rejuvenation, at the expense of strength, with the use of thermal pressure loading. Interestingly, the application of cryogenic thermal cycling results in a rejuvenated state with a lower strength drop compared to thermal pressure loading. Furthermore, analysis of the potential energy and medium-range-order (MRO) size indicates that the microstructures of MGs achieves a high-energy ordered glass state after thermal pressure loading, but a high-energy disordered glass state after biaxial tensile loading and cryogenic thermal cycling. Furthermore, these findings provide meaningful insights into the effect of rejuvenation modes on the microstructures and mechanical properties of MGs, as well as useful guidelines for designing MGs with high strength and superior plasticity for prospective applications in industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thin-Film Fracture Behavior for Diketopyrrolopyrrole Semiconducting Polymeric Films

Fracture energy, which quantifies a material’s resistance to the propagation of a pre-existing crack, is a key parameter for ensuring the mechanical reliability of stretchable organic electronic devices. However, most existing methods, such as a four-point bending fracture energy, utilized for measuring the fracture energy of semiconducting polymeric thin films are complicated by substrate effects, making it challenging to isolate the intrinsic behavior of the film from interfacial influences. In this study, we employed a pseudo free-standing pure shear method to systematically investigate the cohesive fracture energy of poly(diketopyrrolopyrrole-terthiophene) P(DPP-T)-based thin films to examine the effects of nanoconfinement, side chain length, degree of crystallinity, and strain rates. This method effectively eliminates substrate interference, enabling a direct assessment of the cohesive fracture energy of P(DPP-T) thin films. We found that thinner films and those with lower molecular weights exhibited significantly reduced fracture energies due to diminished chain entanglements. Additionally, films with shorter side chains displayed notably higher fracture energies, which were attributed to an increase in the degree of crystallinity. Finally, slower strain rates led to higher fracture energies, consistent with an enhanced stress relaxation. These insights offer practical guidelines for designing mechanically robust semiconducting polymers, contributing to the advancement of reliable, durable, flexible, and wearable electronic devices.

Zhang, Song [Univ. of Southern Mississippi, Hattie↗
DOE OSTI2025

EPR and 31 P ENDOR Characterization of Pseudo-Jahn–Teller Dynamics and N 2 Activation in Functional Nitrogenase Models, P 3 E M(N 2 ) (M = Fe, Co; E = Si, B, C)

Here, the nominally trigonal, pseudo-Jahn-Teller (PJT)-active, S = ½ N 2 -bound transition-metal complexes, P 3 E M(N 2 ), M = Fe, Co, with three in-plane phosphine-ligands and axial donors, E = Si, B, C, include functional nitrogenase models that catalyze reduction of N 2 to NH 3 . We applied EPR, 31 P ENDOR spectroscopy and DFT computations to characterize the PJT-induced distortions of four selected P 3 E M(N 2 ), revealing how the metal-ion and axial ligand E together tune both PJT dynamics and N 2 activation for reduction. Comparisons reveal an unrecognized correlation between PJT distortion, M-E bond elasticity, and N 2 activation, providing guidelines for designing bioinspired N 2 -reduction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Vacancy-Dependent Diffusion Mechanism in Oxygen-Defective SrFeO 3 Perovskite Materials: First-Principles Density Functional Theory and Experimental Approach

Understanding oxygen diffusion at the atomic scale in SrFeO 3−δ perovskites is crucial for developing oxygen storage materials with optimal performance. Such materials are required to have high stability, corrosion resistance, and acceptable oxygen storage capacity at moderate operating temperatures and pressures. Here, in this study, we used first-principles density functional theory and thermogravimetric analysis to study the vacancy-dependent oxygen diffusion in oxygen-deficient SrFeO 3−δ (δ = 0, 0.065, 0.125, 0.25, 0.5) perovskites. The electronic structures, including the partial- and spin-resolved density of states, for different SrFeO 3−δ phases were calculated and compared with available experimental and theoretical results. By mapping the migration pathways, we investigated diffusion mechanisms and calculated the energy barriers for oxygen diffusion in cubic, orthorhombic, and brownmillerite phases of SrFeO 3−δ perovskites. Using the calculated energy barriers, we deduced the diffusion time scales and diffusion coefficients within SrFeO 3−δ . A diffusion coefficient on the order of 10 –8 m 2 /s was obtained for SrFeO 2.875 . We experimentally investigated the roles of temperature and oxygen partial pressures on the redox kinetics and deduced the kinetics rate and diffusion density, which agreed well with the calculated values for the density of diffusing oxygen vacancy in the lattice. Our results showed that the energy barrier tends to reduce at higher oxygen concentrations. Our results serve as an important guideline for designing oxygen storage materials with optimal redox kinetics.

chemical looping with oxygen uncoupling (CLOU)↗
DOE OSTI2026

Structural Origins of High MoO 3 Solubility in Peraluminous Borosilicate Glasses

Molybdenum (Mo) imposes strict loading limits in conventional borosilicate nuclear waste glasses due to the tendency of tetrahedral molybdate [MoO 4 ] 2− species to phase-separate and crystallize as alkali molybdates. Here, we demonstrate an unprecedented 13.96 wt % (7.51 mol %) MoO 3 solubility in peraluminous sodium aluminoborosilicate glasses a ∼15× increase over their peralkaline counterparts. Using Raman spectroscopy, multinuclear and dipolarcorrelation magic angle spinning nuclear magnetic resonance (MAS NMR), electron paramagnetic resonance (EPR), and scanning transmission electron microscopy (STEM)-energy dispersive spectroscopy (EDS), we reveal that Nadeficient, low optical basicity conditions stabilize octahedral MoO 6 units, which polymerize into molybdite-like Mo−O clusters dispersed within the glass matrix. These Mo-rich clusters suppress the formation of depolymerized [MoO 4 ] 2− environments typically responsible for Na 2 MoO 4 precipitation and instead promote the formation of Na 2 Mo 2 O 7 as the saturation phase. Concurrently, Mo solubility drives the conversion of AlO 4 − to higher-coordination AlO 5 species, liberating Na + that is subsequently sequestered in molybdate-rich domains. The combined evolution of Mo coordination, modifier redistribution, and network depolymerization provides a mechanistic basis for the markedly enhanced Mo solubility in peraluminous compositions. These findings establish new structural guidelines for designing aluminoborosilicate waste forms with substantially greater capacity to incorporate Mo-rich nuclear waste streams.

Amorphous materials↗
DOE OSTI2021

Revealing Au13 as Elementary Clusters During the Early Formation of Au Nanocrystals

Understanding the formation mechanism of nanocrystals in solution is very fundamental to the development of materials science. For a metal nanocrystal, the cluster mediated formation mechanism is still poorly understood. Particularly, identifying what types of clusters are dominant and how they evolve into a nanocrystal in the early nucleation stage remains a great challenge. Here, using liquid-cell transmission electron microscopy, we directly observe the formation of ultra-small Au clusters (~0.84 nm) in the presence of PAA-Na. These clusters, which correspond to the size of Au13 cluster, coalesce to form nanocrystals. Our molecular dynamics simulations suggest Au13 in an aqueous environment have higher stability when compared to other cluster sizes and provide atomistic details of growth by cluster coalescence. Collectively, our demonstration of Au13 as the dominant species with elaboration of their coalescence kinetics sheds light on nonclassical nanocrystal formation mechanisms and offers useful guidelines for designing innovative pathways for synthesis of nanomaterials.

Au13 clusters, cluster coalescence, liquid-cell TE↗
DOE OSTI2025

Formation of Larger Solvation Shells in a LiFSI Salt Solution for Enhanced Li + Transport

Electrodes and electrolytes in Li-ion batteries (LIBs) are crucial for their electrochemical performance, and fabricating these materials to achieve the desired properties for improved efficiency is challenging. A recent study published in Nature ( Nature 2024, 627, 101−107) outlined guidelines for designing an electrolyte using fluoroacetonitrile (FACN), a small-molecule solvent with low solvation energy. This characteristic enables the formation of an anion-rich inorganic interphase in a 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) solution, facilitating higher ionic conductivity, even at low temperatures. The formation of a ligand channel was postulated and demonstrated in the simulation due to the attraction of small solvent molecules from the secondary solvation shell to the Li + ion in the primary solvation shell, thereby enhancing Li + transport. While that study primarily focused on Li + ion behavior in LIBs, the behavior of FACN in solutions with different lithium salts and what makes LiFSI in FACN outperform other systems remain to be explored. In conclusion, using an experimental technique sensitive to FACN molecules, here we directly observe formation of larger solvation shells in a LiFSI solution compared to the Li salts with different anions, consistent with the postulated ligand-channel-mechanism and potentially paving the way to achieving enhanced ionic conductivity and energy density during LIB operation.

Batteries↗
DOE OSTI2024

Self-Assembled Bolaamphiphile-Based Organic Nanotubes as Efficient Cu(II) Ion Adsorbents

Self-assembled organic nanotubes (ONTs) have been actively examined for various applications such as chemical separations and catalysis owing to their well-defined tubular nanostructures with distinct chemical environments at the wall and internal/external surfaces. Adsorption of heavy metal ions onto ONTs plays an essential role in many of these applications, but it has rarely been assessed quantitatively. Herein, we investigated interactions between Cu 2+ and single-/quadruple-wall bolaamphiphile-based ONTs having inner carboxyl groups with different inner diameters, COOH-ONT 10nm and COOH-ONT 20nm . We first examined the effects of Cu 2+ on their nanotubular structures using SAXS, STEM, and AFM. COOH-ONT 10nm was stable in aqueous Cu 2+ solution in contrast to COOH-ONT 20nm owing to the presence of polyglycine-II-type hydrogen bonding networks within its wall. Subsequently, we studied the Cu 2+ adsorption behavior of COOH-ONT 10nm by monitoring the concentration of unbound Cu 2+ using linear sweep anodic stripping voltammetry. The Cu 2+ adsorption was quick, attributable to efficient Cu 2+ partitioning through the open ends of the ONT, followed by fast Cu 2+ diffusion in the uniform, relatively large nanochannel. More importantly, the Cu 2+ adsorption capacity and affinity of COOH-ONT 10nm were measured at different pH using the Langmuir adsorption model. The adsorption capacity was similar at the pH range examined, showing the participation of approximately 25% of the inner carboxyl groups in the adsorption. The adsorption affinity increased with pH, indicating the essential role of the deprotonated carboxyl groups in the Cu 2+ adsorption. Most interestingly, the Langmuir adsorption constant was significantly higher than those of previously reported synthetic adsorbents and planar monolayer based on carboxyl binding sites. The high Cu 2+ affinity of the ONT was attributable to the highly dense binding sites on the well-defined nanoscale concave structure of the inner channel. Furthermore, these results provide a valuable guideline to designing self-assembled nanomaterials for efficient chemical separations, detection, and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrogen-Bonding Interactions in Hybrid Aqueous/Nonaqueous Electrolytes Enable Low-Cost and Long-Lifespan Sodium-Ion Storage

Although “water-in-salt” electrolytes have opened a new pathway to expand the electrochemical stability window of aqueous electrolytes, the electrode instability and irreversible proton co-insertion caused by aqueous media still hinder the practical application, even when using exotic fluorinated salts. In this study, an accessible hybrid electrolyte class based on common sodium salts is proposed, and crucially an ethanol-rich media is introduced to achieve highly stable Na-ion electrochemistry. Here, ethanol exerts a strong hydrogen-bonding effect on water, simultaneously expanding the electrochemical stability window of the hybridized electrolyte to 2.5 V, restricting degradation activities, reducing transition metal dissolution from the cathode material, and improving electrolyte–electrode wettability. The binary ethanol–water solvent enables the impressive cycling of sodium-ion batteries based on perchlorate, chloride, and acetate electrolyte salts. Notably, a Na 0.44 MnO 2 electrode exhibits both high capacity (81 mAh g –1 ) and a remarkably long cycle life >1000 cycles at 100 mA g –1 (a capacity decay rate per cycle of 0.024%) in a 1 M sodium acetate system. The Na 0.44 MnO 2 /Zn full cells also show excellent cycling stability and rate capability in a wide temperature range. The gained understanding of the hydrogen-bonding interactions in the hybridized electrolyte can provide new battery chemistry guidelines in designing promising candidates for developing low-cost and long-lifespan batteries based on other (Li + , K + , Zn 2+ , Mg 2+ , and Al 3+ ) systems.

25 ENERGY STORAGE↗