Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Thermal stress cycling of GaAs solar cells

Thermal stress cycling was performed on gallium arsenide solar cells to investigate their electrical, mechanical, and structural integrity. Cells were cycled under low Earth orbit (LEO) simulated temperature conditions in vacuum. Cell evaluations consisted of power output values, spectral response, optical microscopy and ion microprobe mass analysis, and depth profiles on both front surface inter-grid areas and metallization contact grid lines. Cells were examined for degradation after 500, 5,000, 10,000 and 15,245 thermal cycles. No indication of performance degradation was found for any vendor's cell lot.

Francis, Robert W.↗
NASA NTRS1986

Detection of two satellites in the Cassini division of Saturn's rings

The presence of two about 10-km-radius satellites within a 100-km-wide gap in the Cassini division of Saturn's rings is inferred from the observation of perturbations of nearby ring material. The perturbations are detected as regular fluctuations in the optical depth profile measured during Voyager radio occultation by the rings and are used to estimate the satellite's orbits and masses. The two satellites appear to 'shepherd' a 30-km-wide ringlet within the gap.

Marouf, E. A.↗
NASA NTRS1988

Secondary ion mass spectrometry study of ex situ annealing of epitaxial GaAs grown on Si substrates

Samples of epitaxial GaAs grown on (100) Si substrates using molecular beam epitaxy were annealed at four different temperatures, from 800 to 950 C. Following annealing, the samples were analyzed using secondary ion mass spectrometry. Depth profiles of Ga, As, and Si reveal optimum conditions for annealing, and place a lower limit on a damage threshold for GaAs/Si substrates.

Radhakrishnan, G.↗
NASA NTRS1988

Characterization of microcomposite polyimide films

Thermally stable microcomposite polyimide films were prepared by the homogeneous incorporation of either a soluble metal salt or a metal complex into a poly(amide-acid)/N,N-dimethylacetamide solution. The thermal processing of films solvent cast onto glass substrates and cured in an appropriate atmosphere yields films containing not only a fairly uniform dispersion of submicrometer particles, but also a new surface layer of metal or metal oxide. These polymeric systems have been characterized using X-ray photoelectron spectroscopy, Auger electron spectroscopy with depth profiling via argon ion etching, transmission electron microscopy of ultramicrotomed cross-sections, scanning electron microscopy, elemental analysis, thermal analysis, and variable temperature electrical resistivity determinations. The data from these techniques were used cooperatively to develop a model for these microcomposite polyimide films.

Rancourt, J. D.↗
NASA NTRS1989

Mechanical and SEM analysis of artificial comet nucleus samples

Since 1987 experiments dealing with comet nucleus phenomena have been carried out in the DFVLR space simulation chambers. The main objective of these experiments is a better understanding of thermal behavior, surface phenomena and especially the gas dust interaction. As a function of different sample compositions and exposure to solar irradiation (xenon-bulbs) crusts of different hardness and thickness were measured. The measuring device consists of a motor driven pressure foot (5 mm diameter), which is pressed into the sample. The applied compressive force is electronically monitored. The microstructure of the crust and dust residuals is investigated by scanning electron microscopy (SEM) techniques. Stress-depth profiles of an unirradiated and an irradiated model comet are given.

Thiel, K.↗
NASA NTRS1990

Development of a quadrupole-based Secondary-Ion Mass Spectrometry (SIMS) system at Lewis Research Center

The design, construction, and initial use of an ion microprobe to carry out secondary ion mass spectrometry (SIMS) of solid samples is reported. The system is composed of a differentially pumped custom-made UHV (Ultra High Vacuum) chamber, a quadrupole mass spectrometer and a telefocus A-DIDA ion gun with the capability of producing beams of Cesium, as well as inert and reactive gases. The computer control and acquisition of the data were designed and implemented using a personal computer with plug-in boards, and external circuitry built as required to suit the system needs. The software is being developed by using a FORTH-like language. Initial tests aimed at characterizing the system, as well as preliminary surface and depth-profiling studies are presently underway.

Vargas-Aburto, Carlos↗
NASA NTRS1990

Characterization of interfacial failure in SiC reinforced Si3N4 matrix composite material by both fiber push-out testing and Auger electron spectroscopy

AES depth profiling and a fiber push-out test for interfacial shear-strength determination have been used to ascertain the mechanical/chemical properties of the fiber/matrix interface in SiC-reinforced reaction-bonded Si3N4, with attention to the weak point where interfacial failure occurs. In the cases of both composite fracture and fiber push-outs, the interfacial failure occurred either between the two C-rich coatings that are present on the double-coated SiC fibers, or between the inner C-rich coating and the SiC fiber. Interface failure occurs at points of very abrupt concentration changes.

Eldridge, J. I.↗
NASA NTRS1991

Ion microprobe elemental analyses of impact features on interplanetary dust experiment sensor surfaces

Hypervelocity impact features on several of the electro-active dust sensors utilized in the Interplanetary Dust Experiment (IDE) were subjected to elemental analysis using an ion microprobe. The negatively biased dust sensor surfaces acted as ion traps for cations produced in the plasma plumes of impacting particles. Impactor residue surrounds most impact features to two or three feature diameters. After etching away a layer of carbonaceous/silicaceous surface contamination, low mass resolution elemental survey scans are used to tentatively identify the presence of impactor debris. High mass resolution two-dimensional elemental maps and three dimensional depth profiling of the feature and surrounding area show the distribution and relative composition of the debris. The location of these sensors on the six primary Long Duration Exposure Facility (LDEF) sides provides a unique opportunity to further define the debris environment. Researchers applied the same techniques to impact and contaminant features on a set of ultra-pure, highly polished single crystal germanium wafer witness plates that were mounted on row 12 and exposed to the environment during the entire mission.

Hunter, Jerry L.↗
NASA NTRS1991

On the radial structure of Saturn's B ring

Voyager observations have revealed that the Saturnian B ring is much more structured than previously anticipated. Some of these structures occur on radial scale lengths of less than 15 km. In the visible the ring an optical depth minimum at a small distance outside of synchronous orbit. It is suggested in this paper that the electromagnetically induced radial transport of angular momentum associated with radial transport of charged submicron-size dust particles may explain these features. This mechanism induces an instability which produces, over geological times, significant radial structuring of the ring. Mass contained in particles less than about 1 cm in size is transported away from the synchronous orbit. This produces the optical depth minimum there. A simulation, starting with a radially uniform mass and number density, yields a radial optical depth profile which is similar to what is observed. It is found that it takes about 400-800 million yr to produce the observed structure. This estimate for the age of B ring agrees with some other independent estimates.

Shan, Lin-Hua↗
NASA NTRS1991

Resonance structures in Saturn's rings probed by radio occultation. I - Methods and examples

Individual and comparative analyses are conducted for 29 of the wavelike features revealed by optical depth profiles of Saturn's rings; of these, 18 are in Ring A, one is in Ring B, and 10 are in Ring C. Only 20 of these were identifiable with known resonances, and all eight of the unexplained wave features are in Ring C. For 14 weak density waves in Ring A, a linear density wave theory modeling of the waveform near resonance yields independent estimates of the surface mass density together with reliable estimates of resonance location.

Rosen, Paul A.↗
NASA NTRS1991

Structure and particle properties of Saturn's E Ring

The present systematic reanalysis of a substantial portion of extant photometric data on the Saturn E Ring has calibrated every observation on the basis of a common 3D model. A simple power-law model is found to describe the ring's normal optical depth profile with orbital radius; this trend is departed from, however, near the density peak, where there emerges a 30-percent localized decrease in thickness. No power-law size distribution is found to be compatible with available photometry. The peculiar size distribution points to a ring origin in a process that was not collisional or disruptive.

Showalter, Mark R.↗
NASA NTRS1991

Solar-cosmic-ray fluxes during the last ten million years

The fluxes of energetic (E is greater than or approximately equal to 10 MeV) solar particles in the vicinity of the earth in the past can be determined from nuclides that they produced in the top centimeter of lunar rocks. Activity-vs-depth profiles of short-lived radioactivities measured in the top centimeter of lunar rocks agree with profiles calculated with directly measured solar-proton fluxes since about 1965 and were used with indirect observations to get solar-proton fluxes back to 1956. Lunar-rock profiles for long-lived radionuclides have been used to infer solar-proton fluxes averaged over several time periods in the past. New results are reported for solar-proton-produced Kr-81 measured in lunar rock 68815. Activities of 76,000-yr Ni-59 can be used to get fluxes of solar alpha particles averaged over the last 100,000 yr. The average solar-proton fluxes in the past are not greatly different from those observed during the last three 11-yr solar cycles. The work that needs to be done to determine more and better fluxes of energetic particles from the sun in the past is discussed.

Reedy, Robert C.↗
NASA NTRS1992

Martian volatiles determined using the Mars observer gamma ray spectrometer

The relative abundances of H2O and CO2 and their latitude, longitude, and depth profiles on Mars sensitively reflect, as well as help control, past and present Martian climate patterns. Seasonal variations of their distributions at high latitudes also reflect and help control global weather patterns and erosion through surface weathering. A combined analysis of gamma ray line and neutron flux maps constructed from data measured using the Mars Observer Gamma Ray Spectrometer (MOGRS) should allow a determination of seasonal changes in both the horizontal and vertical structure of CO2 ice that covers the north polar cap during winter and the south polar cap throughout the year and both the horizontal and vertical structure of residual H2O ice within the top meter of the surface that was predicted from Viking observations to exist primarily at high latitudes. Particularly important in this regard will be maps of thermal and epithermal neutron fluxes measured using the MOGRS anticoincidence shield, the intensity of the hydrogen, neutron capture gamma ray line at 2.223 MeV, the intensity of a capture gamma ray line as 1.725 MeV from iron, and the intensity of an inelastic scatter gamma ray line as 1.779 MeV from silicon.

Feldman, W. C.↗
NASA NTRS1993

Surface characterization of selected LDEF tray clamps

The surface characterization of chromic acid anodized 6061-T6 aluminum alloy tray clamps has shown differences in surface chemistry depending upon the position on the Long Duration Exposure Facility (LDEF). Water contact angle results showed no changes in wettability of the tray clamps. The overall surface topography of the control, trailing edge(E3) and leading edge(D9) samples was similar. The thickness of the aluminum oxide layer for all samples determined by Auger depth profiling was less than one micron. X-ray photoelectron spectroscopy (XPS) analysis of the tray clamps showed significant differences in the surface composition. Carbon and silicon containing compounds were the primary contaminants detected.

Cromer, T. F.↗
NASA NTRS1992

Titan's upper atmosphere - Structure and ultraviolet emissions

An analysis is conducted of the composition and thermal structure of Titan's upper atmosphere, and the relative importance of airglow-excitation processes, on the basis of Voyager 1 UV spectrometer data for solar occultation and airglow. Attention is also given to the Smith et al. (1982) optical depth profiles for the evening terminator, entrance occultation, and asymptotic temperature. A magnetospheric power input figure is obtained that is 25 times smaller than the initial estimate by Strobel and Shemansky (1982).

Strobel, Darrell F.↗
NASA NTRS1992

Stellar occultation experiment with the CASSINI VIMS instrument

The VIMS instrument (Visible and Infrared Mapping Spectrometer) will be flown in the late 1990s on the CASSINI mission to Saturn and its moons. VIMS is designed to generate two-dimensional multispectral images of planetary surfaces and their features in the visible and infrared spectra. Compared to earth-based instruments, the stellar occultation experiment will provide unprecedented thickness resolution and chemical composition of planetary atmospheres. It will also gather high SNR optical depth profiles and particle size distribution of the Saturnian rings. The stellar occultation mode ideally requires continuous data acquisition for periods of up to several hours as the instrument stares at a star. This presents a sizeable challenge to the instrument's operational mode: processes that normally occur during mirror retrace must be shifted to data acquisition cycles, thereby creating timing difficulties in the sequencing of these cycles. The presentation focuses on the analysis of the stellar occultation mode and presents solutions to the challenge of an uninterrupted data stream. Several options will be presented that minimize any possible degradation of the experiment's science content.

Walch, Marc↗
NASA NTRS1993

Origin and maintenance of the oxygen torus in Saturn's magnetosphere

Observations of thermal ions in Saturn's inner magnetosphere suggest distributed local sources rather than diffusive mass loading from a source located further out. We suggest that the plasma is produced and maintained mainly by 'self-sputtering' of E ring dust. Sputtered particles are 'picked up' by the planetary magnetospheric field and accelerated to corotation energies (of the order of 8 eV/amu). The sputter yield for oxygen on ice at, for example, 120 eV is about 5, which implies that an avalanche of self-sputtering occurs. The plasma density is built up until it is balanced by local losses, presumably pitch angle scattering into the loss cone and absorption in the planet's ionosphere. The plasma density determines the distribution of dust in the E ring through plasma drag. Thus a feedback mechanism between the plasma and the E ring dust is established. The model accounts for the principal plasma observations and simultaneously the radial optical depth profile of the E ring.

Morfill, G. E.↗
NASA NTRS1992

SIMS studies of oxide growth on beta-NiAl

This paper reports on a study of the growth of aluminum oxide on beta-NiAl at temperatures up to 1200 C. The scales have been formed in two-stage experiments using O2-16 and O2-18 gases, and the various isotopic species have been located by direct imaging using SIMS. Supplementary information on oxide morphologies and structures has been obtained by SEM. SIMS images and depth profiles indicate where oxidation has taken place predominantly by cation or anion diffusion at different stages of the growth process. The way in which the presence of small amounts of reactive elements can affect scale growth is also considered. These results help to provide an improved understanding of the mechanism of alumina scale formation, which is of benefit in the development of oxidation-resistant alloys and intermetallics for service at high temperatures.

Mitchell, D. F.↗