Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “demand modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Bridging the Gap Between the iLEAPS and GEWEX Land-Surface Modeling Communities

Models of Earth's weather and climate require fluxes of momentum, energy, and moisture across the land-atmosphere interface to solve the equations of atmospheric physics and dynamics. Just as atmospheric models can, and do, differ between weather and climate applications, mostly related to issues of scale, resolved or parameterised physics,and computational requirements, so too can the land models that provide the required surface fluxes differ between weather and climate models. Here, however, the issue is less one of scale-dependent parameterisations.Computational demands can influence other minor land model differences, especially with respect to initialisation, data assimilation, and forecast skill. However, the distinction among land models (and their development and application) is largely driven by the different science and research needs of the weather and climate communities.

GEWEX↗

The Next Generation of High-Speed Dynamic Stability Wind Tunnel Testing (Invited)

Throughout industry, accurate measurement and modeling of dynamic derivative data at high-speed conditions has been an ongoing challenge. The expansion of flight envelopes and non-conventional vehicle design has greatly increased the demand for accurate prediction and modeling of vehicle dynamic behavior. With these issues in mind, NASA Langley Research Center (LaRC) embarked on the development and shakedown of a high-speed dynamic stability test technique that addresses the longstanding problem of accurately measuring dynamic derivatives outside the low-speed regime. The new test technique was built upon legacy technology, replacing an antiquated forced oscillation system, and greatly expanding the capabilities beyond classic forced oscillation testing at both low and high speeds. The modern system is capable of providing a snapshot of dynamic behavior over a periodic cycle for varying frequencies, not just a damping derivative term at a single frequency.

Tomek, Deborah M.↗

Using Markov Models of Fault Growth Physics and Environmental Stresses to Optimize Control Actions

A generalized Markov chain representation of fault dynamics is presented for the case that available modeling of fault growth physics and future environmental stresses can be represented by two independent stochastic process models. A contrived but representatively challenging example will be presented and analyzed, in which uncertainty in the modeling of fault growth physics is represented by a uniformly distributed dice throwing process, and a discrete random walk is used to represent uncertain modeling of future exogenous loading demands to be placed on the system. A finite horizon dynamic programming algorithm is used to solve for an optimal control policy over a finite time window for the case that stochastic models representing physics of failure and future environmental stresses are known, and the states of both stochastic processes are observable by implemented control routines. The fundamental limitations of optimization performed in the presence of uncertain modeling information are examined by comparing the outcomes obtained from simulations of an optimizing control policy with the outcomes that would be achievable if all modeling uncertainties were removed from the system.

Bole, Brian↗

Modeling Weather Impact on Airport Arrival Miles-in-Trail Restrictions

When the demand for either a region of airspace or an airport approaches or exceeds the available capacity, miles-in-trail (MIT) restrictions are the most frequently issued traffic management initiatives (TMIs) that are used to mitigate these imbalances. Miles-intrail operations require aircraft in a traffic stream to meet a specific inter-aircraft separation in exchange for maintaining a safe and orderly flow within the stream. This stream of aircraft can be departing an airport, over a common fix, through a sector, on a specific route or arriving at an airport. This study begins by providing a high-level overview of the distribution and causes of arrival MIT restrictions for the top ten airports in the United States. This is followed by an in-depth analysis of the frequency, duration and cause of MIT restrictions impacting the Hartsfield-Jackson Atlanta International Airport (ATL) from 2009 through 2011. Then, machine-learning methods for predicting (1) situations in which MIT restrictions for ATL arrivals are implemented under low demand scenarios, and (2) days in which a large number of MIT restrictions are required to properly manage and control ATL arrivals are presented. More specifically, these predictions were accomplished by using an ensemble of decision trees with Bootstrap aggregation (BDT) and supervised machine learning was used to train the BDT binary classification models. The models were subsequently validated using data cross validation methods. When predicting the occurrence of arrival MIT restrictions under low demand situations, the model was able to achieve over all accuracy rates ranging from 84% to 90%, with false alarm ratios ranging from 10% to 15%. In the second set of studies designed to predict days on which a high number of MIT restrictions were required, overall accuracy rates of 80% were achieved with false alarm ratios of 20%. Overall, the predictions proposed by the model give better MIT usage information than what has been currently provided under current day operations. Traffic flow managers can use these predictions to identify potential MIT restrictions to eliminate (e.g., those occurring during low arrival demand periods), and to determine the days in which a significant number of restrictions may be required

Operation↗

Pursuit tracking and higher levels of skill development in the human pilot

A model of the human pilot is offered for pursuit tracking tasks; the model encompasses an existing model for compensatory tracking. The central hypothesis in the development of this model states that those primary structural elements in the compensatory model responsible for the pilot's equalization capabilities remain intact in the pursuit model. In this latter case, effective low-frequency inversion of the controlled-element dynamics occurs by feeding-forward derived input rate through the equalization dynamics, with low-frequency phase droop minimized. The sharp reduction in low-frequency phase lag beyond that associated with the disappearance of phase droop is seen to accompany relatively low-gain feedback of vehicle output. The results of some recent motion cue research are discussed and interpreted in terms of the compensatory-pursuit display dichotomy. Tracking with input preview is discussed in a qualitative way. In terms of the model, preview is shown to demand no fundamental changes in structure or equalization and to allow the pilot to eliminate the effective time delays that accrue in the inversion of the controlled-element dynamics. Precognitive behavior is discussed, and a model that encompasses all the levels of skill development outlined in the successive organizations of perception theory is finally proposed.

Hess, R. A.↗

Improving Access to the GEOS Composition Forecast Model with API Development and Ingestion into Google Earth Engine

The GEOS Composition Forecast (GEOS-CF) model produces forecast and historical estimates of atmospheric composition and meteorology fields, which provide useful insight into air quality issues and events. In a year for which Canadian wildfires created adverse air quality conditions in the eastern United States, access to model fields such as PM2.5 are in high demand. The GEOS-CF team at the NASA Global Modeling and Assimilation Office (GMAO) first developed in-house solutions to improve data access via the CF API, and recently partnered with Google to ingest a collated set of model diagnostics into the Google Earth Engine (GEE) data repository. GEOS-CF model output is also being ingested into AWS storage. Creating these various open access points to GEOS-CF model diagnostics provides the public with an opportunity to easily interact with air quality information. Users are able to use a temporally consistent global grid of air quality fields in machine learning applications, mapping tools, and data informatics. Hosting GEOS-CF forecasts and the historical timeseries of these chemistry and meteorology fields in GEE allows users to create dynamic JavaScript-based air quality applications in the GEE code editor. GEOS-CF users can also access the model output via the GEE Python application programming interface (API), making it easy to perform various analyses with Python. This presentation will show two examples of accessing the GEOS-CF model through GEE. The first is an example application made in the GEE code editor which allows users to view time series plots and downscaled maps of surface level NO2. The second example exhibits using the GEE Python API to create a machine learning model to temporally gap-fill between air quality observations. These examples are an introduction to the many possible benefits of having open access to the GEOS-CF model through multiple platforms.

Callum Wayman↗

Improving Access to the GEOS Composition Forecast Model with API Development and Ingestion into Google Earth Engine

The GEOS Composition Forecast (GEOS-CF) model produces forecast and historical estimates of atmospheric composition and meteorology fields, which provide useful insight into air quality issues and events. In a year for which Canadian wildfires created adverse air quality conditions in the eastern United States, access to model fields such as PM2.5 are in high demand. The GEOS-CF team at the NASA Global Modeling and Assimilation Office (GMAO) first developed in-house solutions to improve data access via the CF API, and recently partnered with Google to ingest a collated set of model diagnostics into the Google Earth Engine (GEE) data repository. GEOS-CF model output is also being ingested into AWS storage. Creating these various open access points to GEOS-CF model diagnostics provides the public with an opportunity to easily interact with air quality information. Users are able to use a temporally consistent global grid of air quality fields in machine learning applications, mapping tools, and data informatics. Hosting GEOS-CF forecasts and the historical timeseries of these chemistry and meteorology fields in GEE allows users to create dynamic JavaScript-based air quality applications in the GEE code editor. GEOS-CF users can also access the model output via the GEE Python application programming interface (API), making it easy to perform various analyses with Python. This presentation will show two examples of accessing the GEOS-CF model through GEE. The first is an example application made in the GEE code editor which allows users to view time series plots and downscaled maps of surface level NO 2 . The second example exhibits using the GEE Python API to create a machine learning model to temporally gap-fill between air quality observations. These examples are an introduction to the many possible benefits of having open access to the GEOS-CF model through multiple platforms.

Callum Wayman↗

The ASAC Air Carrier Investment Model (Second Generation)

To meet its objective of assisting the U.S. aviation industry with the technological challenges of the future, NASA must identify research areas that have the greatest potential for improving the operation of the air transportation system. To accomplish this, NASA is building an Aviation System Analysis Capability (ASAC). The ASAC differs from previous NASA modeling efforts in that the economic behavior of buyers and sellers in the air transportation and aviation industries is central to its conception. To link the economics of flight with the technology of flight, ASAC requires a parametrically based mode with extensions that link airline operations and investments in aircraft with aircraft characteristics. This model also must provide a mechanism for incorporating air travel demand and profitability factors into the airlines' investment decisions. Finally, the model must be flexible and capable of being incorporated into a wide-ranging suite of economic and technical models that are envisioned for ASAC. We describe a second-generation Air Carrier Investment Model that meets these requirements. The enhanced model incorporates econometric results from the supply and demand curves faced by U.S.-scheduled passenger air carriers. It uses detailed information about their fleets in 1995 to make predictions about future aircraft purchases. It enables analysts with the ability to project revenue passenger-miles flown, airline industry employment, airline operating profit margins, numbers and types of aircraft in the fleet, and changes in aircraft manufacturing employment under various user-defined scenarios.

Wingrove, Earl R., III↗

Non-urban mobile radio market demand forecast

A national nonmetropolitan land mobile traffic model for 1990-2000 addresses user classes, density classes, traffic mix statistics, distance distribution, geographic distribution, price elasticity, and service quality elasticity. Traffic demands for business, special industrial, and police were determined on the basis of surveys in 73 randomly selected nonurban counties. The selected services represent 69% of total demand. The results were extrapolated to all services in the non-SMSA areas of the contiguous United States. Radiotelephone services were considered separately. Total non-SMSA mobile radio demand (one way) estimates are given. General functional requirements include: hand portability, privacy, reduction of blind spots, two way data transmission, position location, slow scan imagery.

Castruccio, P. A.↗

Economic modeling and energy policy planning

A structural economic model is presented for estimating the demand functions for natural gas and crude oil in industry and in steam electric power generation. Extensions of the model to other commodities are indicated.

Thompson, R. G.↗

Control of Systems With Slow Actuators Using Time Scale Separation

This paper addresses the problem of controlling a nonlinear plant with a slow actuator using singular perturbation method. For the known plant-actuator cascaded system the proposed scheme achieves tracking of a given reference model with considerably less control demand than would otherwise result when using conventional design techniques. This is the consequence of excluding the small parameter from the actuator dynamics via time scale separation. The resulting tracking error is within the order of this small parameter. For the unknown system the adaptive counterpart is developed based on the prediction model, which is driven towards the reference model by the control design. It is proven that the prediction model tracks the reference model with an error proportional to the small parameter, while the prediction error converges to zero. The resulting closed-loop system with all prediction models and adaptive laws remains stable. The benefits of the approach are demonstrated in simulation studies and compared to conventional control approaches.

Stepanyan, Vehram↗

Performance of an Optimized Eta Model Code on the Cray T3E and a Network of PCs

In the year 2001, NASA will launch the satellite TRIANA that will be the first Earth observing mission to provide a continuous, full disk view of the sunlit Earth. As a part of the HPCC Program at NASA GSFC, we have started a project whose objectives are to develop and implement a 3D cloud data assimilation system, by combining TRIANA measurements with model simulation, and to produce accurate statistics of global cloud coverage as an important element of the Earth's climate. For simulation of the atmosphere within this project we are using the NCEP/NOAA operational Eta model. In order to compare TRIANA and the Eta model data on approximately the same grid without significant downscaling, the Eta model will be integrated at a resolution of about 15 km. The integration domain (from -70 to +70 deg in latitude and 150 deg in longitude) will cover most of the sunlit Earth disc and will continuously rotate around the globe following TRIANA. The cloud data assimilation is supposed to run and produce 3D clouds on a near real-time basis. Such a numerical setup and integration design is very ambitious and computationally demanding. Thus, though the Eta model code has been very carefully developed and its computational efficiency has been systematically polished during the years of operational implementation at NCEP, the current MPI version may still have problems with memory and efficiency for the TRIANA simulations. Within this work, we optimize a parallel version of the Eta model code on a Cray T3E and a network of PCs (theHIVE) in order to improve its overall efficiency. Our optimization procedure consists of introducing dynamically allocated arrays to reduce the size of static memory, and optimizing on a single processor by splitting loops to limit the number of streams. All the presented results are derived using an integration domain centered at the equator, with a size of 60 x 60 deg, and with horizontal resolutions of 1/2 and 1/3 deg, respectively. In accompanying charts we report the elapsed time, the speedup and the Mflops as a function of the number of processors for the non-optimized version of the code on the T3E and theHIVE. The large amount of communication required for model integration explains its poor performance on theHIVE. Our initial implementation of the dynamic memory allocation has contributed to about 12% reduction of memory but has introduced a 3% overhead in computing time. This overhead was removed by performing loop splitting in some of the high demanding subroutines. When the Eta code is fully optimized in order to meet the memory requirement for TRIANA simulations, a non-negligeable overhead may appear that may seriously affect the efficiency of the code. To alleviate this problem, we are considering implementation of a new algorithm for the horizontal advection that is computationally less expensive, and also a new approach for marching in time.

Kouatchou, Jules↗

Performance Analysis of Cloud Computing Architectures Using Discrete Event Simulation

Cloud computing offers the economic benefit of on-demand resource allocation to meet changing enterprise computing needs. However, the flexibility of cloud computing is disadvantaged when compared to traditional hosting in providing predictable application and service performance. Cloud computing relies on resource scheduling in a virtualized network-centric server environment, which makes static performance analysis infeasible. We developed a discrete event simulation model to evaluate the overall effectiveness of organizations in executing their workflow in traditional and cloud computing architectures. The two part model framework characterizes both the demand using a probability distribution for each type of service request as well as enterprise computing resource constraints. Our simulations provide quantitative analysis to design and provision computing architectures that maximize overall mission effectiveness. We share our analysis of key resource constraints in cloud computing architectures and findings on the appropriateness of cloud computing in various applications.

Stocker, John C.↗

Assessing Ecosystem Service Provision Under Climate Change to Support Conservation and Development Planning in Myanmar

Inclusion of ecosystem services (ES) information into national-scale development and climate adaptation planning has yet to become common practice, despite demand from decision makers. Identifying where ES originate and to whom the benefits flowunder current and future climate conditionsis especially critical in rapidly developing countries, where the risk of ES loss is high. Here, using Myanmar as a case study, we assess where and how ecosystems provide key benefits to the countrys people and infrastructure. We model the supply of and demand for sediment retention, dry-season baseflows, flood risk reduction and coastal storm protection from multiple beneficiaries. We find that locations currently providing the greatest amount of services are likely to remain important under the range of climate conditions considered, demonstrating their importance in planning for climate resilience. Overlap between priority areas for ES provision and biodiversity conservation is higher than expected by chance overall, but the areas important for multiple ES are underrepresented in currently designated protected areas and Key Biodiversity Areas. Our results are contributing to development planning in Myanmar, and our approach could be extended to other contexts where there is demand for national-scale natural capital information to shape development plans and policies

Climate change↗

A dynamic model of stress and sustained attention

Arguments are presented that an integrated view of stress and performance must consider the task demanding a sustained attention as a primary source of cognitive stress. A dynamic model is developed on the basis of the concept of adaptability in both physiological and psychological terms, that addresses the effects of stress on vigilance and, potentially, a wide variety of attention-demanding performance tasks. The model provides an insight into the failure of an operator under the driving influences of stress and opens a number of potential avenues through which solutions to the complex challenge of stress and performance might be posed.

Hancock, P. A.↗

Consumer Expectations of Capacity Constrains and Their Effect on the Demand for Multi-Class Air Travel

This paper argues that a consumer's decision on ticket class takes into account the expected likelihood of obtaining a seat in a particular class which, in turn, partially depends on an optimum "transaction cost". Taking into account the preferences of the consumer and the information that the consumer is endowed with, the consumer will select a ticket that includes its own optimal transaction cost. This motivates the inclusion of the capacity constraint as a proxy independent variable for these consumer expectations This then forms the basis of a model of air-travel demand with specific reference to Australia. A censored likelihood function allowing for correlation in the disturbance term across k classes is introduced. The correlation in the disturbances arises as a result of the interdependence of the capacity constraints in k different ticket classes on each flight.

Battersby, Bryn D.↗

Comprehensive Static and Dynamic Modeling of a Magnetic Suspension and Balance System

Magnetic Suspension and Balance Systems (MSBS) are inherently complex multi-degree-of-freedom dynamic systems. Comprehensive, high-fidelity dynamic models are increasingly important due to the application of model-based controllers as well as demands for unsteady aerodynamic data derived from post-test system identification. This paper reviews some aspects of the development of a dynamic model of the NASA/ODU 6-inch MSBS.

blunt body↗

Comprehensive Static and Dynamic Modeling of a Magnetic Suspension and Balance System

Magnetic Suspension and Balance Systems (MSBS) are inherently complex multi-degree-of-freedom dynamic systems. Comprehensive, high-fidelity dynamic models are increasingly important due to the application of model-based controllers as well as demands for unsteady aerodynamic data derived from post-test system identification. This paper reviews some aspects of the development of a dynamic model of the NASA/ODU 6-inch MSBS.

blunt body↗