SEARCH · Engineering Papers

Results for “controlled islanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Investigation on Tuning Power–Frequency Droop for Improved Grid–Forming Inverter and Synchronous Generator Transient Load Sharing

Poor transient load sharing has been observed during the parallel operation of synchronous generators (SGs) and droop-controlled grid-forming (GFM) inverter-based resources (IBRs) in islanded microgrids. This can result in overcurrent protections, causing the inverters to trip, which leads to the collapse of voltage and frequency. In this article, small-signal analysis supported by electromagnetic transients (EMTs) simulation is performed on a detailed model of a microgrid containing IBRs and an SG to identify underdamped modes and their sensitivities to the power–frequency (P-F) droop parameter. Further EMT simulation of a more complex microgrid model with multiple GFM IBRs and SGs is performed to determine whether trends identified from the modal analysis extend to cases where the number of SGs in operation may vary. The objective is to investigate the effectiveness of tuning this parameter to reduce the likelihood of overcurrents in response to load and generation disturbances. The work uncovers both fast and slow modes of concern. Primarily, the findings show that increasing the P-F droop value improves the damping of the slower mode while degrading the damping of the faster mode, leading to an upper limit on the damping improvement of the GFM IBR output current. In EMT simulations of the more complex microgrid, the greatest damping improvement still exhibits significant maximum overshoot. Furthermore, the optimal value of the P-F droop parameter is sensitive to the number of SGs in operation. The conclusion is that tuning the P-F droop parameter is not an effective means to avoid the overcurrent tripping of GFM IBRs during response to large load or generation disturbances when operating in parallel to SGs in islanded microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Reinforcement Learning to Enhance Optimal Operation of Resilient Community Energy Systems

This paper presents a novel model-free multi-agent Reinforcement Learning (RL) control method to enhance the resilience of community energy systems in island mode, which coordinates multiple objectives without the necessity of identifying system models that require expert knowledge. Specifically, a community-level coordinator agent is designed to allocate renewable energy resources among different buildings, and multiple building-level agents are developed to optimize load schedules based on limited energy resources and requirements of building loads and occupants’ comfort. In a two-day evaluation, our RL approach demonstrated a similar performance against MPC without requiring system models and formulation of optimization problems as required in MPC.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

DOE OSTI2022

Transient Stability Study of a Real-World Microgrid with 100% Renewables

This paper performs a transient stability study of a real-world microgrid that can operate with 100% renewables to better understand the stability and reliability of the microgrid under various dynamic scenarios. In particular, the operation of multiple grid-forming (GFM) and grid-following (GFL) inverters in such a power system is not well understood under dynamic operation conditions, such as islanding and black start; therefore, in this paper, an electromagnetic transient model of the microgrid is developed to investigate the stability of the system under various dynamic operating conditions and to identify potential reliability risks. The PSCAD/EMTDC simulation with the high-fidelity model provides helpful insights into the optimal operation modes of GFM and GFL inverters as well as the stability and reliability of the microgrid. It can also inform field deployment in terms of inverter control parameters and coordination as well as the expected performance of black start and unplanned islanding.

black start↗

DOE OSTI2022

Transient Stability Study of a Real-World Microgrid with 100% Renewables

black start↗

DOE OSTI2025

Error field identification through torque balance on a saturated island in DIII-D

Measurement of the electromagnetic torque on a magnetic island could be an attractive method for error field identification in the early phase of ITER operation. Previous DIII-D experiments (Strait 2014 Nucl. Fusion 54 073004; Shiraki et al 2015 Plasma Phys. Control. Fusion 57 025016) have demonstrated the principle of this approach using a stationary or slowly rotating island, while recent developments in magnetic data analysis (Sweeney and Strait 2019 Phys. Plasmas 26 012509) allow the field of a rapidly rotating island to be readily distinguished from that of the wall currents induced by its rotation. In a recent experiment, a rotating n = 1 magnetic perturbation forced a saturated magnetic island to rotate, thus sampling all toroidal phases periodically in a single discharge. The phase and amplitude of the error field are inferred from analysis of the time-dependent torque balance on the island, including torques from the error field, the applied magnetic perturbation, and the wall currents induced by rotation of the applied perturbation and the island. Furthermore, results agree well with those from more conventional methods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Drift kinetic theory of the NTM magnetic islands in a finite beta general geometry tokamak plasma

In (Imada et al 2019 Nucl. Fusion 59 046016 and references therein) a new 4D drift kinetic nonlinear theory, valid in the limit of a low beta, small inverse aspect ratio, circular cross section, toroidal geometry, to describe the plasma response to the neoclassical tearing mode (NTM) magnetic perturbation is derived. In (Dudkovskaia et al 2021 Plasma Phys. Control. Fusion 63 054001) this theory is reduced in a low collisionality limit, which allows a dimensionality reduction to a 3D problem to efficiently resolve the collisional dissipation layer in the vicinity of the trapped-passing boundary. (Dudkovskaia et al 2021 Plasma Phys. Control. Fusion 63 054001) adopts an improved model for the magnetic drift frequency, which reduces the threshold magnetic island half-width from $8.73\rho_{b i}$, where $\rho_{b i}$ is the trapped ion banana orbit width, to $1.46 \rho_{b i}$, making it in closer agreement with experimental observations for the large aspect ratio tokamak equilibrium. In the present paper, the theory is extended to a high beta, arbitrary tokamak geometry to capture the plasma shaping effects on the NTM threshold physics with the focus on the non-zero triangularity discharges that are known to have a strong impact on the plasma MHD stability. First, it is found that the higher triangularity plasma is more prone to NTMs which is in agreement with the 2/1 tearing mode onset relative frequency measurements in DIII-D. Second, the NTM threshold dependence on the tokamak inverse aspect ratio obtained in (Dudkovskaia et al 2021 Plasma Phys. Control. Fusion 63 054001) is refined and extended to a finite aspect ratio limit. Third, the NTM threshold dependence on poloidal beta is obtained and benchmarked against the EAST threshold island width measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Dynamics and Control of Microgrids as a Resiliency Source

Microgrids can be operated in a utility-connected mode with the neighboring distribution system or in an islanded mode in separation with the distribution system. As the major disasters occur more and more often, islanded microgrid is proposed as a possible solution to serve essential loads until the utility service is restored. This paper evaluates the feasibility of using microgrids as a resiliency resource by a field test. A control scheme, integrating droop control and feedback control, is applied on a modified IEEE 13-node test feeders. The simulation results validate the proposed control scheme and the transient stability

Lee, Lung-An↗

DOE OSTI2023

Evaluation of aerosol–cloud interactions in E3SM using a Lagrangian framework

A Lagrangian framework is used to evaluate aerosol–cloud interactions in the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM) version 1 (E3SMv1) for measurements taken at Graciosa Island in the Azores where a U.S. Department of Energy Atmosphere Radiation Measurement (ARM) site is located. This framework uses direct measurements of cloud condensation nuclei (CCN) concentration (instead of relying on satellite retrievals of aerosol optical depth) and incorporates a suite of ground-based ARM measurements, satellite retrievals, and meteorological reanalysis products that when applied to over a 1500 trajectories provides key insights into the evolution of low-level clouds and aerosol radiative forcing that is not feasible from a traditional Eulerian analysis framework. Significantly lower concentrations (40 %) of surface CCN concentration are measured when precipitation rates in 48 h back trajectories average above 1.2 mm d -1 in the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (IMERG) product. The depletion of CCN concentration when precipitation rates are elevated is nearly twice as large in the ARM observations compared to E3SMv1 simulations. The model CCN concentration bias remains significant despite modifying the autoconversion and accretion rates in warm clouds. As the clouds in trajectories associated with larger surface-based CCN concentration advect away from Graciosa Island, they maintain higher values of droplet number concentrations (N d ) over multiple days in observations and E3SM simulations compared to trajectories that start with lower CCN concentrations. The response remains robust even after controlling for meteorological factors such as lower troposphere stability, the degree of cloud coupling with the surface, and island wake effects. E3SMv1 simulates a multi-day aerosol effect on clouds and a Twomey radiative effect that is within 30 % of the ARM and satellite observations. However, the mean cloud droplet concentration is more than 2–3 times larger than in the observations. While Twomey radiative effects are similar amongst autoconversion and accretion sensitivity experiments, the liquid water path and cloud fraction adjustments are positive when using a regression model as opposed to negative when using the present-day minus pre-industrial aerosol emissions approach. This result suggests that tuning the autoconversion and accretion alone is unlikely to produce the desired aerosol susceptibilities in E3SMv1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Advanced Hierarchical Control Strategies in Multi-Building Microgrids

This paper proposes a hierarchical control system for a multi-building AC microgrid with improved inertia and immunity to communication delay. The primary level control is based on a Virtual Synchronous Generator (VSG) control and the secondary level control is enhanced with a SmithPredictor to improve the stability of the system in the presence of communication delay. Moreover, tertiary level control is proposed to effectively control active and reactive power sharing between the grid and the microgrid. Islanded and grid-connected modes of the microgrid system under study are illustrated with the help of simulation results in MATLAB Simulink environment.

Weldehawaryat, Lidya Mussie [graduate research ass↗

DOE OSTI2024

Use of Grid-Forming Medium-Voltage Power Electronics Hub in a Microgrid Setting

This paper presents the application of a new design of a multiport, modular, medium-voltage power electronics hub (M3PE-HUB) in a microgrid setting. The M3PE-HUB system was modeled in a digital real-time simulator (DRTS) and integrated into the Banshee microgrid test system. This paper presents the preliminary DRTS simulation-based results of the M3PE-HUB system connected in a test microgrid system. Verification and validation of the M3PE-HUB architecture and controls in the test microgrid setting are the primary contributions of this work. The results of the operation during the islanding and resynchronization process indicate the feasibility of the proposed architecture in a microgrid setting. This paper also presents results for a system reconfiguration use case where the M3PE-HUB was used to reconfigure the system under a fault condition.

grid forming↗

DOE OSTI2020

Energy-Storage Fed Smart Inverters for Mitigation of Voltage Fluctuations in Islanded Microgrids

The continuous integration of intermittent low-carbon energy resources makes islanded microgrids vulnerable to voltage fluctuations. Besides, different dynamic response of synchronous-based and inverter-based distributed generation (DG) units can result in an instantaneous power imbalance between supply and demand during transients. As a result, the ac-bus voltage of microgrid starts oscillating which might have severe consequences such as blackouts. This paper modifies the conventional control scheme of battery energy storage systems (BESSs) to participate in improving the dynamic behavior of islanded microgrids by mitigating the voltage fluctuations. A piecewise linear-elliptic (PLE) droop is proposed and employed in BESS to achieve an enhanced voltage profile by injecting/absorbing reactive power during transients. In this way, the conventional inverter implemented in BESS turns into a smart inverter to cope with fast transients. Using the proposed approach in this paper, any linear droop curve with a specified coefficient can be replaced by a PLE droop curve. Compared with linear droop, an enhanced dynamic response is achieved by utilizing the proposed PLE droop. Case study results are presented using PSCAD/EMTDC to demonstrate the superiority of the proposed approach in improving the dynamic behavior of islanded microgrids.

Pilehvar, Mohsen S.↗

DOE OSTI2022

Time-dependent THMC properties and microstructural evolution of damaged rocks in excavation damage zone

Modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in host rocks near high-level nuclear waste (HLW) repositories at various time scales is an extremely challenging task. The current study integrates experimental, theoretical, and numerical methods in assessing the evolution of excavation damage zone (EDZ) over time and its implication on the long-term migration of hazardous species. Argillite and rock salt and are the focus of this study. The first part of the report presents a novel time-dependent directional microcrack damage theory for generic brittle rocks. It features detailed statistical description of the microcracks within a damaged solid, permitting a direct upscaling of microscale processes such as crack growth kinetics, crack closure/opening, sliding friction to explain the macroscopic creep, nonlinear elasticity, shear dilation, and loading-unloading hysteresis. This provides a basic platform for describing the anisotropic mechanical and transport properties of damaged rocks during excavation and subsequent THMC loadings. The model is validated and numerically implemented to Finite Element (FE) package ABAQUS through the user-defined material (UMAT) interface and have demonstrated great potential in resolving the time-dependent and anisotropic evolution of damage in the EDZ. The second part of the report presents a multi-scale experimental effort in characterizing the thermal, hydraulic, and mechanical properties of Mancos shale and Avery Island salt. For the Mancos shale, triaxial compression tests are performed at different confining pressures and temperatures to probe its thermomechanical properties relevant to HLW repositories. The obtained stress-strain data are interpreted using the proposed directional damage theory. Post-test specimens are subjected to gas permeability tests to reveal the correlation between permeability and the degree of microcracking. At microscale, temperature-controlled nanoindentation tests are performed and found a linear correlation between fracture toughness and elastic modulus from 25°C to 300°C. For Avery Island salt, we have designed and manufactured a novel relative-humidity controlled uniaxial creep device. Long-term creep tests at low stresses (< 5 MPa) are performed at different levels of relative humidity (RH). Besides confirming the much higher creep rates as one would expect through extrapolating the high-stress creep data, the results reveal that the steady-state creep rate of rock salt is strongly dependent on the ambient RH, an aspect that is often neglected in the literature. Both behaviors can be attributed to the pressure-solution creep mechanism which dominates at low stress and high RH levels. The third part of the report explores a set of numerical strategies in modeling the THMC behavior of porous geomaterials. A fully implicit, monolithic FE solution that can flexibly interface with different material models and coupling mechanisms for THMC problems is developed and verified through the ABAQUS user-defined element (UEL) interface. The scheme is used to study the THM response of a hypothetical HLW storage site with reference to an existing in-situ heater test. Strategies for integrating the UEL and the microcrack UMAT are suggested. Another numerical endeavor of this study is to implement a higher-order asymptotic homogenization method to account for the heterogeneous porous structures. The same method is then extended to perform microstructure-informed thermo-mechanical modeling of generalized continua. The above outcomes of this project provide a strong thrust towards enhancing the fundamental understanding and modeling capability of the long-term evolution of host rocks in EDZ, thus helping achieve the design goal of 1-million-year isolation of high-level nuclear wastes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Drift orbit islands of energetic particles due to 3D fields in ITER

In this study, we report a comparative study of the orbit islands formed by the guiding center drift motion of test energetic particles (EPs), including both high-energy deuterium ions and fusion-born α-particles, with respect to the magnetic islands formed by tracing the field lines, for an ITER plasma representing the 15 MA baseline scenario. The particle drift orbit is modified by the presence of static resonant magnetic perturbations (RMPs) of different toroidal mode numbers n (n = 1 and 3 in this study), forming orbit islands in the Poincaré plane by passing EPs. The key findings are as follows. (i) With an n = 1 RMP field, the size of the orbit islands combined with the total RMP field, including the plasma response, is about three times smaller than that obtained by assuming the corresponding vacuum field. (ii) The orbit island size is not sensitive to the EP energy, and is comparable to those of the magnetic islands. (iii) Passing EPs with outward radial orbital drift form orbit islands that shift inward with respect to the corresponding magnetic islands, and vice versa. This radial shift, ΔΨ, measured in the normalized equilibrium poloidal flux, is quantified as ΔΨ ≃ 0.03X for the ITER baseline plasma and assuming n = 1 RMPs, with $X\equiv {(M/{M}_{\mathrm{p}})}^{1/2}{(E[\mathrm{M}\mathrm{e}\mathrm{V}])}^{1/2}{Z}^{-1}$, where M is the particle mass, Mp is the proton mass, E is the particle energy, and Z is the particle charge number. (iv) Trapped EPs do not form drift orbit islands, even in the presence of the 3D fields produced by the 90 kAt ELM control coil current in ITER, and thus possess good confinement properties. Nevertheless, the deformation of the trapped particle drift orbits in the Poincaré plane shows that the canonical toroidal angular momentum of EPs is no longer conserved in the presence of the RMP fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Integrating a Microgrid Controller with a Local OpenADR Server

When military microgrids isolate themselves from the main electrical grid, they must locally balance electricity supply and demand. Since local generation may be limited, the current strategy is to shed all but the most critical loads by tripping smart circuit breakers, which must then be reset manually (e.g., ESTCP project EW-201350). This strategy is typically applied at the building level, meaning that entire buildings housing mission critical activities must be excluded from any load management, while those considered non-critical may lose service entirely. The remotely controlled switchgear needed to manage load in this way is very expensive ($\$30,000$-$\$50,000$ per building). While effective at shedding load, this strategy disrupts installation operation and risks damaging equipment during both disconnection and re-energization. With the goals of lowering costs, protecting equipment, and enhancing the agility of DoD microgrids, this report demonstrates the use of cybersecure automated demand response (ADR) technology to manage microgrid loads during grid-independent (a.k.a. "islanded") operation. This automated approach achieves load shedding and shifting through communication signals sent to equipment controllers rather than by cutting off the flow of electricity within the microgrid itself. Because it operates only on the base network, with no connection to external entities, this strategy avoids the main cybersecurity concern raised by past applications of ADR on military bases.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2022

Nonlinear growth of magnetic islands by passing fast ions in NSTX

The growth of magnetic islands in NSTX is modeled successfully, with the consideration of passing fast ions. It is shown that a good quantitative agreement between simulation and experimental measurement can be achieved when the uncompensated cross-field current induced by passing fast ions is included in the island growth model. The fast ion parameters, along with other equilibrium parameters, are obtained self-consistently using the TRANSP code with the assumptions of the ‘kick’ model (Podestà et al 2017 Plasma Phys. Control. Fusion 59 095008). The results show that fast ions can contribute to overcoming the stabilizing effect of polarization current for magnetic island growth.

Fast ions↗

DOE OSTI2022

Nonlinear growth of magnetic islands by passing fast ions in NSTX

The growth of magnetic islands in NSTX is modeled successfully, with the consideration of passing fast ions. It is shown that a good quantitative agreement between simulation and experimental measurement can be achieved when the uncompensated cross-field current induced by passing fast ions is included in the island growth model. The fast ion parameters, along with other equilibrium parameters, are obtained self-consistently using the TRANSP code with the assumptions of the 'kick' model (Podestà et al 2017 Plasma Phys. Control. Fusion 59 095008). Overall, the results show that fast ions can contribute to overcoming the stabilizing effect of polarization current for magnetic island growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

An Application of ASP in Nuclear Engineering: Explaining the Three Mile Island Nuclear Accident Scenario

Abstract The paper describes an ongoing effort in developing a declarative system for supporting operators in the Nuclear Power Plant (NPP) control room. The focus is on two modules: diagnosis and explanation of events that happened in NPPs. We describe an Answer Set Programming (ASP) representation of an NPP, which consists of declarations of state variables, components, their connections, and rules encoding the plant behavior. We then show how the ASP program can be used to explain the series of events that occurred in the Three Mile Island, Unit 2 (TMI-2) NPP accident, the most severe accident in the USA nuclear power plant operating history. We also describe an explanation module aimed at addressing answers to questions such as “why an event occurs?” or “what should be done?” given the collected data.

Computer Science↗

DOE OSTI2020

High-temperature Majorana fermions in magnet-superconductor hybrid systems

Magnet-superconductor hybrid (MSH) structures represent one of the most promising platforms to realize, control, and manipulate Majorana modes using scanning tunneling methods. By depositing either chains or islands of magnetic atoms on the surface of a conventional, elemental superconductor such as Pb or Re, topological superconducting phases can emerge. They feature either localized Majorana bound states at the chain ends or dispersing chiral Majorana modes at the island's boundary. However, some of these experiments have not reached the spectral resolution to clearly distinguish between topological Majorana and trivial Shiba states due to very small superconducting gap sizes and experiments performed at sub-Kelvin temperatures. Here we consider superconducting substrates with unconventional spin-singlet pairing, including high-temperature d -wave and extended s -wave superconductors. We derive topological phase diagrams and compute edge states for cylinder and island geometries and discuss their properties. Several time-reversal invariant topological superconducting phases of the Zhang-Kane-Mele type are found and discussed. Addiotnally, we review one-dimensional MSH structures and show that parameters to realize topologically nontrivial magnetic chains embedded into a larger, two-dimensional substrate differ from the purely one-dimensional case. Quite generally we find that unconventional superconducting substrates work as well as the conventional s -wave substrates to realize topological phases. In particular, iron-based pnictide and chalcogenide superconductors are the most promising class of substrates for future high-temperature MSH systems.

36 MATERIALS SCIENCE↗