Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compaction banding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Multi-Band Multi-Tone Tunable Millimeter-Wave Frequency Synthesizer For Satellite Beacon Transmitter

This paper presents the design and test results of a multi-band multi-tone tunable millimeter-wave frequency synthesizer, based on a solid-state frequency comb generator. The intended application of the synthesizer is in a satellite beacon transmitter for radio wave propagation studies at K-band (18 to 26.5 GHz), Q-band (37 to 42 GHz), and E-band (71 to 76 GHz). In addition, the architecture for a compact beacon transmitter, which includes the multi-tone synthesizer, polarizer, horn antenna, and power/control electronics, has been investigated for a notional space-to-ground radio wave propagation experiment payload on a small satellite. The above studies would enable the design of robust high throughput multi-Gbps data rate future space-to-ground satellite communication links.

Antenna↗
NASA NTRS2019

Probing boson stars with extreme mass ratio inspirals

We propose to use gravitational waves from extreme mass ratio inspirals (EMRI), composed of a boson star and a supermassive black hole in the center of galaxies, as a new method to search for boson stars. Gravitational waves from EMRI have the advantage of being long-lasting within the frequency band of future space-based interferometer gravitational wave detectors and can accumulate large signal-to-noise ratio (SNR) for very sub-solar mass boson stars. Compared to gravitational waves from boson star binaries, which fall within the LIGO band, we find that much larger ranges of the mass and compactness of boson stars, as well as the underlying particle physics parameter space, can be probed by EMRI. We take tidal disruption of the boson stars into account and distinguish those which dissolve before the inner-most-stable-circular-orbit (ISCO) and those which dissolve after it. Due to the large number of cycles recorded, EMRIs can lead to a very precise mass determination of the boson star and distinguish it from standard astrophysical compact objects in the event of a signal. Tidal effects in inspiralling binary systems, as well as possible correlated electromagnetic signals, can also serve as potential discriminants.

Huai-Ke Guo↗
NASA NTRS1986

Optical, radio, and infrared observations of compact H II regions. V - The Hourglass in M8

Multiwavelength observations of the inner core of the M8 Hourglass region are presented, including VLA interferometric maps, 2-4 micron and 8-13 micron spectroscopy, photometric mapping in the K (2.2 micron) and L (3.45 micron) bands and in the 3.28 micron dust-emission feature, optical CCD imaging, and optical and infrared polarimetry. The compact H II region is excited by the O7 V star Herschel 36, and its apparent bipolar structure at optical wavelengths may be due to variable line-of-sight extinction and scattered light. Standard reddening laws are not applicable in the Hourglass region. A power law extinction lambda exp -0.78 yields consistent agreement between ultraviolet, optical, and infrared extinction estimates and suggests that one component of the total grain distribution is on the average larger than that found in the interstellar medium. The spatial distribution of the 3.28 micron dust-emission feature shows that the feature emission is associated with the boundary layer in the H II region/molecular cloud interface. The observations favor models in which feature emission comes from small refractory grains rather than from fluorescence or thermal emission from volatile mantles.

Woodward, C. E.↗
DOE OSTI2022

J-PLUS: Uncovering a large population of extreme [OIII] emitters in the local Universe

Over the past decades, several studies have discovered a population of galaxies that undergo very strong star formation events. They are called extreme emission line galaxies (EELGs). We exploit the capabilities of the Javalambre Photometric Local Universe Survey (J-PLUS), a wide-field multifilter survey, with which 2000 square degrees of the northern sky are already observed. We use it to identify EELGs at low redshift by their [OIII]5007 emission line. We intend to provide a more complete, deep, and less biased sample of local EELGs. We selected objects with an excess of flux in the J-PLUS medium-band J0515 filter, which covers the [OIII] line at z < 0.06. We removed contaminants (stars and higher-redshift systems) using J-PLUS and WISE infrared photometry, with SDSS spectra as a benchmark. We performed spectral energy distribution fitting to estimate the physical properties of the galaxies: line fluxes, equivalent widths (EWs), masses, stellar population ages, and so on. We identify 466 EELGs at z < 0.06 with [OIII] EW over 300 Å and an r-band magnitude below 20, of which 411 were previously unknown. Most show compact morphologies, low stellar masses (log(M • /M ⊙ ) ~ 8.13 –0.58 +0.61 ), low dust extinction (E( B–V ) ~ 0.1 –0.1 +0.2 ), and very young bursts of star formation (3.0 –2.0 +2.7 Myr). Our method is up to ~20 times more efficient in detecting EELGs per Mpc 3 than broadband surveys, and it is as complete as magnitude-limited spectroscopic surveys (but reaches fainter objects). The sample is not directly biased against strong Hα emitters, in contrast with works using broadband surveys. We demonstrate that J-PLUS can identify a large sample of previously unknown EELGs showing unique properties following a clear selection process. A fraction of the EELGs are probably similar to the first galaxies in the Universe, but they are at a much lower redshift, which makes them ideal targets for follow-up studies.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1983

Very-long-baseline radio interferometry - The Mark III system for geodesy, astrometry, and aperture synthesis

Up to 112 megabit/sec from each radio telescope of an interferometric array can be recorded and processed by the Mark III VLBI system. Sample results are given for baseline lengths between three antennas in the U.S. and three in Europe, as well as for the arc lengths between the positions of six extragalactic radio sources. No significant change is detected in any of these quantities. Signals of a given polarization or of pairs of orthogonal polarizations may be recorded in up to 28 contiguous bands, each nearly 2 MHz wide, for mapping the brightness distribution of compact radio sources. The demonstrated ability to record large bandwidths, and to link many large radio telescopes, allows compact sources with flux densities below 1 millijansky to be detected and studied.

Rogers, A. E. E.↗
NASA NTRS2007

Optically Transparent Split-Ring Antennas for 1 to 10 GHz

Split-ring antennas made from optically transparent, electrically conductive films have been invented for applications in which there are requirements for compact antennas capable of operation over much or all of the frequency band from 1 to 10 GHz. Primary examples of such applications include wireless local-area networks and industrial, scientific, and medical (ISM) applications. These antennas can be conveniently located on such surfaces as those of automobile windows and display screens of diverse hand-held electronic units. They are fabricated by conventional printed-circuit techniques and can easily be integrated with solid-state amplifier circuits to enhance gain. The structure of an antenna of this type includes an antenna/feed layer supported on the top or outer face of a dielectric (e.g., glass) and, optionally, a ground layer on the bottom or inner face of the substrate. The ring can be in the form of either a conductive strip or a slot in the antenna/feed layer. The ring can be of rectangular, square, circular, elliptical, or other suitable shape and can be excited by means of a microstrip, slot line, or coplanar waveguide. For example, the antenna shown in the figure features a square conductive-strip split ring with a microstrip feed. In general, an antenna fed at its external boundary in the manner of this invention presents very high impedance, thereby creating an impedance-matching problem. Splitting the ring . that is, cutting a notch through the ring . offers a solution to the problem in that the notch fixes the location of maximum electric field, which location is directly related to the impedance. Thus, an excellent impedance match can be achieved through proper choice of the location of the notch. In geometric layout, such a ring antenna structure is typically between 1.4 and 1.3 the size of a patch antenna capable of operating in the same frequency range. This miniaturization of the antenna is desirable, not only because it contributes to overall miniaturization of equipment, but also because minimization of the extent of the optically transparent, electrically conductive film helps to minimize the electrical loss associated with the surface resistance ( 5 ohms per square) of the transparent, electrically conductive film material. Incidentally, even at 5 ohms per square, this surface resistance is significantly less than that of indium tin oxide film (typically > 25 ohms per square), which, heretofore has been the transparent, electrically conductive film material of choice. At the time of writing this article, information on the composition of the lower-resistance film used in the antennas of this invention was not available.

Lee, Richard Q.↗
NASA NTRSDate not supplied

The LISA Science Ground Segment

The mHz band of the gravitational wave (GW) spectrum contains an unprecedented abundance of galactic, extra-galactic, and cosmological sources. The Laser Interferometer Space Antenna (LISA) will survey the mHz GW band and provide unique observational constraints on the formation and evolution of compact binaries in the Milky Way, the origin and growth of massive black holes throughout cosmic history, the dynamics of dense stellar environments in galactic nuclei, the fundamental nature of gravity and black holes, and more. The richness of the LISA data comes at the price of a more complicated analysis framework than is required for currently operating GW observatories.

Tyson B. Littenberg↗
DOE OSTI2020

Millimeter-wave Point Sources from the 2500 Square Degree SPT-SZ Survey: Catalog and Population Statistics

In this work, we present a catalog of emissive point sources detected in the SPT-SZ survey, a contiguous 2530- square-degree area surveyed with the South Pole Telescope (SPT) from 2008 - 2011 in three bands centered at 95, 150, and 220GHz. The catalog contains 4845 sources measured at a significance of 4.5σ or greater in at least one band, corresponding to detections above approximately 9.8, 5.8, and 20.4 mJy in 95, 150, and 220 GHz, respectively. Spectral behavior in the SPT bands is used for source classification into two populations based on the underlying physical mechanisms of compact, emissive sources that are bright at millimeter wavelengths: synchrotron radiation from active galactic nuclei and thermal emission from dust. The latter population includes a component of high-redshift sources often referred to as submillimeter galaxies (SMGs). In the relatively bright flux ranges probed by the survey, these sources are expected to be magnified by strong gravitational lensing. The survey also contains sources consistent with protoclusters, groups of dusty galaxies at high redshift undergoing collapse. We cross-match the SPT-SZ catalog with external catalogs at radio, infrared, and X-ray wavelengths and identify available redshift information. The catalog splits into 3980 synchrotron-dominated and 865 dust-dominated sources and we determine a list of 506 SMGs. Ten sources in the catalog are identified as stars. We calculate number counts for the full catalog, and synchrotron and dusty components, using a bootstrap method and compare our measured counts with models. This paper represents the third and final catalog of point sources in the SPT-SZ survey.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2008

Compact Dielectric-Rod White-Light Delay Lines

Optical delay lines of a proposed type would be made from rods of such dielectric materials as calcium fluoride, fused silica, or sapphire. These would offer advantages over prior optical delay lines, as summarized below. Optical delay lines are key components of opto-electronic microwave oscillators, narrow-band opto-electronic microwave filters, evanescent-field optical biochemical detectors, and some Fourier-Transform spectrum analyzers. Heretofore, optical delay lines used in such applications have been of two types: resonators and coiled long optical fibers, both of which have disadvantages: Resonators are compact, but excitation must be provided by narrow-band lasers. Wide-band (including noisy) laser light cannot be coupled efficiently to narrow-band resonators. When light is coupled into a narrowband resonator from a source of reasonably high power, a significant amount of optical energy circulates within the resonator, causing nonlinear loss and significant noise. Typically, a coil-type optical delay line is made of fused-silica fiber, which exhibits fundamental loss. To overcome the limit imposed by the optical loss in fused silica, it would be necessary to use fibers having crystalline cores. Although space is saved by winding fibers into coils, fiber-coil delay lines are still inconveniently bulky. The proposed compact dielectric-rod delay lines would exploit the special class of non-diffracting light beams that are denoted Bessel beams because their amplitudes are proportional to Bessel functions of the radii from their central axes. High-order Bessel beams can have large values of angular momentum. They can be generated with the help of whispering-gallery-mode optical resonators, as described, for example, in "Simplified Generation of High-Angular-Momentum Light Beams" (NPO-42965) NASA Tech Briefs, Vol. 31, No. 3 (March 2007), page 8a. In a delay line according to the proposal, the dielectric rod would be dimensioned to function as a multimode waveguide. Suitably chosen high-angular-momentum modes in such a waveguide exhibit low group velocity (hence, long delay) and no resonance. Such a delay line could perform well at any wavelength or range of wavelengths within the transparency wavelength band of the dielectric material, and the maximum possible group delay achievable through suitable design would be limited only by the optical loss in the rod material.

Maleki, Lute↗
NASA NTRS1991

Multi-Spectral Solar Telescope Array. V - Temperature diagnostic response to the optically thin solar plasma

The compact soft X-ray/EUV/FUV multilayer coated telescopes developed for solar chromosphere, corona, and corona/solar-wind interface studies permit the use of conventional (Cassegrain, Herschelian, etc.) configurations. The multilayer coatings also allow a narrow-wavelength band to be selected for imaging. NASA's Multi-Spectral Solar Telescope Array is composed of 17 of these compact telescopes; attention is given to their ability to obtain temperature-diagnostic information concerning the solar plasma.

Deforest, Craig E.↗
NASA NTRS1973

Combined diplexer and harmonic filter

By using two directional filters having circular waveguide filter cavities, diplexing and harmonic filtering functions can be combined into a more compact integrated waveguide assembly. Device is filter which passes power within its pass band limits, but also has a directional characteristic so power transmitted into two-port output waveguide will travel in only one direction.

Allen, C. C.↗
NASA NTRS1973

Evaluation of ERTS data for certain hydrological uses

The author has identified the following significant results. Mapping of snow cover using ERTS-1 data proved to be six times faster than that done from U-2 photography. However, NOAA-2 VHRR snow cover mapping was almost as fast as ERTS-1, and it is available more frequently. Ice conditions in the Great Lakes can be readily determined by ERTS-1. Ice features characteristic of thawing conditions such as rotten ice, lack of pressure ridges, brash belts, and compacted ice edges can be identified. A great decrease in apparent reflectivity in band 7 as compared to band 4 also indicated melting conditions. Using sidelap from two successive ERTS-1 images of Lake Erie (February 17 and 18, 1973) a measure of ice movement was made, agreeing closely with the estimate from conventional methods. The same imagery permitted tentative identification of the following features: shuga, light and dark nilas, fast ice, icefoot, ice breccia, brash ice, fracturing, ridging, rafting, sastrugi, thaw holes, rotten ice, ice islands, dried ice puddles, hummocked ice, and leads.

Wiesnet, D. R.↗
NASA NTRS2020

Asteroid (101955) Bennu’s Weak Boulders and Thermally Anomalous Equator

Thermal inertia and surface roughness are proxies for the physical characteristics of planetary surfaces. Global maps of these two propertiesdistinguish the boulder population on near-Earth asteroid (NEA) (101955)Bennuinto two typesthat differ in strength,andboth havelower thermal inertiathan expectedfor boulders and meteorites. Neither has strongly temperature-dependent thermal properties. The weakerbouldertypeprobably would not survive atmospheric entry and thus may not berepresented in the meteorite collection. The maps also show ahigh-thermal-inertia band at Bennu’s equator, which might be explained by processes such as compaction or strength sorting during mass movement, but these explanations are not wholly consistent with other data. Our findings imply that other C-complex NEAs likely have boulderssimilar to those on Bennu,rather than finer-particulate regoliths.A tentative correlation between albedo and thermal inertia of C-complex NEAs may be due to relative abundances of boulder types.

B Rozitis↗
NASA NTRS2009

Compact, Miniature MMIC Receiver Modules for an MMIC Array Spectrograph

A single-pixel prototype of a W-band detector module with a digital back-end was developed to serve as a building block for large focal-plane arrays of monolithic millimeter-wave integrated circuit (MMIC) detectors. The module uses low-noise amplifiers, diode-based mixers, and a WR10 waveguide input with a coaxial local oscillator. State-of-the-art InP HEMT (high electron mobility transistor) MMIC amplifiers at the front end provide approximately 40 dB of gain. The measured noise temperature of the module, at an ambient temperature of 300 K, was found to be as low as 450 K at 95 GHz. The modules will be used to develop multiple instruments for astrophysics radio telescopes, both on the ground and in space. The prototype is being used by Stanford University to characterize noise performance at cryogenic temperatures. The goal is to achieve a 30-50 K noise temperature around 90 GHz when cooled to a 20 K ambient temperature. Further developments include characterization of the IF in-phase (I) and quadrature (Q) signals as a function of frequency to check amplitude and phase; replacing the InP low-noise amplifiers with state-of-the-art 35-nm-gate-length NGC low-noise amplifiers; interfacing the front-end module with a digital back-end spectrometer; and developing a scheme for local oscillator and IF distribution in a future array. While this MMIC is being developed for use in radio astronomy, it has the potential for use in other industries. Applications include automotive radar (both transmitters and receivers), communication links, radar systems for collision avoidance, production monitors, ground-penetrating sensors, and wireless personal networks.

Kangaslahti, Pekka P.↗
NASA NTRS2011

A Ka-Band Celestial Reference Frame with Applications to Deep Space Navigation

The Ka-band radio spectrum is now being used for a wide variety of applications. This paper highlights the use of Ka-band as a frequency for precise deep space navigation based on a set of reference beacons provided by extragalactic quasars which emit broadband noise at Ka-band. This quasar-based celestial reference frame is constructed using X/Ka-band (8.4/32 GHz) from fifty-five 24-hour sessions with the Deep Space Network antennas in California, Australia, and Spain. We report on observations which have detected 464 sources covering the full 24 hours of Right Ascension and declinations down to -45 deg. Comparison of this X/Ka-band frame to the international standard S/X-band (2.3/8.4 GHz) ICRF2 shows wRMS agreement of approximately 200 micro-arcsec in alpha cos(delta) and approximately 300 micro-arcsec in delta. There is evidence for systematic errors at the 100 micro-arcsec level. Known errors include limited SNR, lack of instrumental phase calibration, tropospheric refraction mis-modeling, and limited southern geometry. The motivation for extending the celestial reference frame to frequencies above 8 GHz is to access more compact source morphology for improved frame stability and to support spacecraft navigation for Ka-band based NASA missions.

k-band↗
NASA NTRS2017

Neptune Long-Lived Atmospheric Features in 2013 - 2015 from Small (28-cm) to Large (10-m) Telescopes

Since 2013, observations of Neptune with small telescopes (28-50 cm) have resulted in several detections of long-lived bright atmospheric features that have also been observed by large telescopes such as Keck II or Hubble. The combination of both types of images allows the study of the long-term evolution of major cloud systems in the planet. In 2013 and 2014 two bright features were present on the planet at southern mid-latitudes. These may have merged in late 2014, possibly leading to the formation of a single bright feature observed during 2015 at the same latitude. This cloud system was first observed in January 2015 and nearly continuously from July to December 2015 in observations with telescopes in the 2-10-m class and in images from amateur astronomers. These images show the bright spot as a compact feature at −40.1 +/- 1.6 deg planetographic latitude well resolved from a nearby bright zonal band that extended from −42 deg to −20 deg. The size of this system depends on wavelength and varies from a longitudinal extension of 8000 +/- 900 km and latitudinal extension of 6500 +/- 900 km in Keck II images in H and Ks bands to 5100 +/- 1400 km in longitude and 4500 +/- 1400 km in latitude in HST images in 657 nm. Over July to September 2015 the structure drifted westward in longitude at a rate of 24.48 +/- 0.03 deg/day or −94 +/- 3 m/s. This is about 30 m/s slower than the zonal winds measured at the time of the Voyager 2 flyby. Tracking its motion from July to November 2015 suggests a longitudinal oscillation of 16 deg in amplitude with a 90-day period, typical of dark spots on Neptune and similar to the Great Red Spot oscillation in Jupiter. The limited time covered by high-resolution observations only covers one full oscillation and other interpretations of the changing motions could be possible. HST images in September 2015 show the presence of a dark spot at short wavelengths located in the southern flank (planetographic latitude −47.0 deg) of the bright compact cloud observed throughout 2015. The drift rate of the bright cloud and dark spot translates to a zonal speed of −87.0 +/- 2.0 m/s, which matches the Voyager 2 zonal speeds at the latitude of the dark spot. Identification of a few other features in 2015 enabled the extraction of some limited wind information over this period. This work demonstrates the need of frequently monitoring Neptune to understand its atmospheric dynamics and shows excellent opportunities for professional and amateur collaborations.

dynamics↗
NASA NTRS1982

Infrared studies of star formation in Orion

The results of IR studies of the cluster of compact IR sources in the Orion Molecular Cloud are discussed in view of broad band and low spectral resolution measurements, and with attention to new measurements of the 8-12.5-micron color temperature, the 3.8-micron polarization of the IR emission from the vicinity of the cluster, and new 34-micron maps of the region which possess high spatial resolution. These measurements are found to be useful in the identification of the principal luminosity sources within the cluster. The propects for future star formation studies which have their basis in the use of space telescopes optimized for IR observation are also discussed.

Werner, M. W.↗