Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “collective variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four crew evaluations on prototypes for the different LOO hardware. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four rounds of crew evaluations with multiple crewmembers on prototypes for the different LOO subsystems. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four rounds of crew evaluations with multiple crewmembers on prototypes for the different LOO subsystems. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRS1993

One-milliarsecond precision parallax studies in the regions of Delta Cephei and EV Lacertae

Trigonometric parallaxes for stars in the regions of the variable stars delta Cephei and EV Lacertae are derived from data collected with the Multichannel Astrometric Photometer (MAP) and the Thaw Refractor of the University of Pittsburgh's Allegheny Observatory. The weighted mean parallax of all trigonometric studies of delta Cephei is now + 0.0030 sec + or - 0.00093 sec, corresponding to a distance modulus of 7.61 + or - 0.67 mag. This indicates that this luminosity standard star is approximately one standard deviation more distance than has been generally accepted. The weighted mean trigonometric parallax of all studies of the variable star EV Lacertae (BD + 43 deg 4305) is + 0.1993 sec + or - 0.00093 sec, implying a distance modulus of - 1.498 + or - 0.0010 mag. The calculated absolute magnitude of this star is almost exactly that predicted by its (R-I)(sub Kron) magnitude and by the Gliese (R-I) main-sequence value for stars in the solar neighborhood. We also find a parallax of 0.0189 sec + or - 0.0008 sec for the FO IVn star, HR 8666 (BD + 43 sec 4300). The derived luminosity of this star is midway between that expected for luminosity class IV and V stars at the indicated temperature.

Gatewood, George↗
NASA NTRS2009

Adaptive Control of a Utility-Scale Wind Turbine Operating in Region 3

Adaptive control techniques are well suited to nonlinear applications, such as wind turbines, which are difficult to accurately model and which have effects from poorly known operating environments. The turbulent and unpredictable conditions in which wind turbines operate create many challenges for their operation. In this paper, we design an adaptive collective pitch controller for a high-fidelity simulation of a utility scale, variable-speed horizontal axis wind turbine. The objective of the adaptive pitch controller in Region 3 is to regulate generator speed and reject step disturbances. The control objective is accomplished by collectively pitching the turbine blades. We use an extension of the Direct Model Reference Adaptive Control (DMRAC) approach to track a reference point and to reject persistent disturbances. The turbine simulation models the Controls Advanced Research Turbine (CART) of the National Renewable Energy Laboratory in Golden, Colorado. The CART is a utility-scale wind turbine which has a well-developed and extensively verified simulator. The adaptive collective pitch controller for Region 3 was compared in simulations with a bas celliansesical Proportional Integrator (PI) collective pitch controller. In the simulations, the adaptive pitch controller showed improved speed regulation in Region 3 when compared with the baseline PI pitch controller and it demonstrated robustness to modeling errors.

Frost, Susan A.↗
NASA NTRS1991

Results from the cascaded variable conductance heatpipe experiment on LDEF

A Variable Conductance Heat Pipe Experiment (CVCHPE) was successfully flown onboard the LDEF and demonstrated temperature control better than +/- 0.3 C during 50 days of on-orbit data collection in a widely varying external environment. The experiment used two series connected, dry reservoir variable conductance heat pipes which require no electrical power for operation. The heat pipes used a central artery design with ammonia working fluid and nitrogen control gas.

Grote, Michael G.↗
NASA NTRS1992

Results from the LDEF/A0076 cascaded variable conductance heatpipe experiment

The A0076 Variable Conductance Heat Pipe Experiment (CVCHPE) on the Long Duration Exposure Facility (LDEF) demonstrated temperature control better than +/- 0.3 C during fifty days on on-orbit data collection in a widely varying external environment. The experiment used two series connected, dry reservoir variable conductance heat pipes which require no electrical power for operation. The heat pipes used a central artery design with ammonia working fluid and nitrogen control gas. The LDEF was in orbit for almost six years rather than the planned one year mission. Although no additional data were taken during this extended period, post-test data indicated that the set point drifted upward less than 1 C per year. There were significant changes to the appearance of all external thermal control surfaces primarily due to atomic oxygen degradation, and one small anomaly in the electronics. These changes, though, had little effect on the CVCHPE performance.

Grote, Michael G.↗
NASA NTRS1992

Interannual variability of monthly Southern Ocean sea ice distributions

The interannual variability of the Southern-Ocean sea-ice distributions was mapped and analyzed using data from Nimbus-5 ESMR and Nimbus-7 SMMR, collected from 1973 to 1987. The set of 12 monthly maps obtained reveals many details on spatial variability that are unobtainable from time series of ice extents. These maps can be used as baseline maps for comparisons against future Southern Ocean sea ice distributions. The maps are supplemented by more detailed maps of the frequency of ice coverage, presented in this paper for one month within each of the four seasons, and by the breakdown of these results to the periods covered individually by each of the two passive-microwave imagers.

Parkinson, Claire L.↗
NASA NTRS1977

Relationship between the kinetic energy budget and intensity of convection

Synoptic data collected over the eastern United States during the fourth Atmospheric Variability Experiment, April 24 and 25, 1975, is used to study the relationship between the kinetic energy budget and the intensity of convective activity. It is found that areas of intense convective activity are also major centers of kinetic energy activity. Energy processes increase in magnitude with an increase in convection intensity. Large generation of kinetic energy is associated with intense convection, but large quantities of energy are transported out of the area of convection. The kinetic energy budget associated with grid points having no convection differs greatly from the budgets of the three categories of convection. Weak energy processes are not associated with convection.

Fuelberg, H. E.↗
NASA NTRS1979

Temporal spectral measurements of corn and soybean crops

A ground-based, hand-held radiometer, configured to measure red and photographic infrared spectral radiances, was successfully used to collect in situ temporal spectral measurements of corn and soybean crops. Significant relationships were found between the radiance data and the biomass, plant height, percentage crop cover, percentage crop chlorosis, and percentage leaf loss. The results of this experiment show conclusively that hand-held radiometers can be used to collect spectral data that are highly correlated to several agronomic variables. These findings suggest approaches for agronomic research, and confirm the value of remote sensing of agricultural targets.

Tucker, C. J.↗
NASA NTRS1992

Sources of mesoscale variability of gravity waves. I - Topographic excitation. II - Frontal, convective, and jet stream excitation

The effect of topography as a source of mesoscale variability was investigated using aircraft measurements of winds and temperature collected during the Global Atmospheric Sampling Program, with results showing marked increases in the variance of zonal and meridional wind speeds and of potential temperature over rough terrain. In addition, four cases of mesoscale variance enhancements of horizontal velocity and temperature due to frontal activity, nonfrontal convection, and wind shear were studied. The implications of these episodic enhancements of variances for the vertical transports of energy and momentum are considered in the framework of the gravity wave theory.

Nastrom, Gregory D.↗
NASA NTRS1993

Investigating pyrolysis/incineration as a method of resource recovery from solid waste

Pyrolysis/incineration (P/I) is a physicochemical method for the generation of recoverable resources from solid waste materials such as inedible plant biomass (IPB), paper, plastics, cardboard, etc. P/I permits the collection of numerous gases with a minimal amount of solid residue. Pyrolysis, also known as starved air incineration, is usually conducted at relatively high temperatures (greater than 500 deg C) in the absence of oxygen. Incineration is conducted at lower temperatures in the presence of oxygen. The primary purpose of this study was to design, construct, and test a model P/I. The system design includes safety requirements for temperature and pressure. The objectives of this study were: (1) to design and construct a P/I system for incorporation with the Hybrid Regenerative Water Recovery System; (2) to initiate testing of the P/I system; (3) to collect and analyze P/I system data; (4) to consider test variables; and (5) to determine the feasibility of P/I as an effective method of resource recovery. A P/I system for the recovery of reuseable resources from solid waste materials was designed, constructed, and tested. Since a large amount of inedible plant biomass (IPB) will be generated in a space-based habitat on the lunar surface and Mars, IPB was the primary waste material tested in the system. Analysis of the effluent gases was performed to determine which gases could be used in a life support system.

Robertson, Bobby J.↗
NASA NTRS1994

Impact of clouds on the shortwave radiation budget of the surface-atmosphere system for snow-covered surfaces

Recent data from the Earth Radiation Budget Experiment (ERBE) have raised the question as to whether or not the addition of clouds to the atmospheric column can decrease the top-of-the atmosphere (TOA) albedo over bright snow-covered surface. To address this issue, ERBE shortwave pixel measurements have been collected with surface insolation measurements made at two snow-covered locations: the South Pole and Saskatoon, Saskatchewan. Both collected datasets show a negative correlation (with solar zenith angle variability removed) between TOA albedo and surfaces insolation. Because increased cloudiness acts to reduce surface insolation, these negative correlations demonstrate that clouds increase the TOA albedo at both snow-covered locations.

Nemesure, Seth↗
NASA NTRS2001

Flight Computer Design for the Space Technology 5 (ST-5) Mission

As part of NASA's New Millennium Program, the Space Technology 5 mission will validate a variety of technologies for nano-satellite and constellation mission applications. Included are: a miniaturized and low power X-band transponder, a constellation communication and navigation transceiver, a cold gas micro-thruster, two different variable emittance (thermal) controllers, flex cables for solar array power collection, autonomous groundbased constellation management tools, and a new CMOS ultra low-power, radiation-tolerant, +0.5 volt logic technology. The ST-5 focus is on small and low-power. A single-processor, multi-function flight computer will implement direct digital and analog interfaces to all of the other spacecraft subsystems and components. There will not be a distributed data system that uses a standardized serial bus such as MIL-STD-1553 or MIL-STD-1773. The flight software running on the single processor will be responsible for all real-time processing associated with: guidance, navigation and control, command and data handling (C&DH) including uplink/downlink, power switching and battery charge management, science data analysis and storage, intra-constellation communications, and housekeeping data collection and logging. As a nanosatellite trail-blazer for future constellations of up to 100 separate space vehicles, ST-5 will demonstrate a compact (single board), low power (5.5 watts) solution to the data acquisition, control, communications, processing and storage requirements that have traditionally required an entire network of separate circuit boards and/or avionics boxes. In addition to the New Millennium technologies, other major spacecraft subsystems include the power system electronics, a lithium-ion battery, triple-junction solar cell arrays, a science-grade magnetometer, a miniature spinning sun sensor, and a propulsion system.

Speer, David↗
NASA NTRS2009

Statistical and Scaling Properties of Remotely-Sensed Soil Moisture in Two Contrasting Domains in the North American Monsoon Region

Characterizing soil moisture (theta) variability is important for inferring high-resolution information from coarse estimates provided by remote sensors. In this study, we analyze the spatial variability and scale invariance of high-resolution theta estimates collected in two contrasting semiarid areas, Arizona (AZ) and Sonora (SON), during the Soil Moisture Experiment - North American Monsoon in 2004 (SMEX04- NAME). Results reveal that as the mean theta condition ( ) becomes drier, the spatial standard deviation becomes smaller in both domains. The coefficient of variation of theta decreases with in SON, but does not display a clear tendency with in AZ. We also found the presence of scale invariance and multifractality in the range of support scales from 51.2 km to 0.8 km for all soil moisture fields in the two regions. The multifractal properties of theta are clearly linked to in SON, while the relation is affected by more dispersion in AZ. We argue this is due to differences in the dynamic (rainfall) and static (vegetation) controls on theta in the two domains.

Mascaro, Giuseppe↗
NASA NTRS2012

Stitching of near-nulled subaperture measurements

A metrology system for measuring aspheric test objects by subaperture stitching. A wavefront-measuring gauge having a limited capture range of wavefront shapes collects partially overlapping subaperture measurements over the test object. A variable optical aberrator reshapes the measurement wavefront with between a limited number of the measurements to maintain the measurement wavefront within the capture range of the wavefront-measuring gauge. Various error compensators are incorporated into a stitching operation to manage residual errors associated with the use of the variable optical aberrator.

Murphy, Paul↗
NASA NTRS2013

Common Practice Lightning Strike Protection Characterization Technique to Quantify Damage Mechanisms on Composite Substrates

To support FAA certification airworthiness standards, composite substrates are subjected to lightning direct-effect electrical waveforms to determine performance characteristics of the lightning strike protection (LSP) conductive layers used to protect composite substrates. Test results collected from independent LSP studies are often incomparable due to variability in test procedures & applied practices at different organizations, which impairs performance correlations between different LSP data sets. Under a NASA supported contract, The Boeing Company developed technical procedures and documentation as guidance in order to facilitate a test method for conducting universal common practice lightning strike protection test procedures. The procedures obtain conformity in future lightning strike protection evaluations to allow meaningful performance correlations across data sets. This universal common practice guidance provides the manufacturing specifications to fabricate carbon fiber reinforced plastic (CFRP) test panels, including finish, grounding configuration, and acceptable methods for pretest nondestructive inspection (NDI) and posttest destructive inspection. The test operations guidance elaborates on the provisions contained in SAE ARP5416 to address inconsistencies in the generation of damage protection performance data, so as to provide for maximum achievable correlation across capable lab facilities. In addition, the guidance details a direct effects test bed design to aid in quantification of the multi-physical phenomena surrounding a lightning direct attachment supporting validation data requirements for the development of predictive computational modeling. The lightning test bed is designed to accommodate a repeatable installation procedure to secure the test panel and eliminate test installation uncertainty. It also facilitates a means to capture the electrical waveform parameters in 2 dimensions, along with the mechanical displacement and thermal heating parameters which occur during lightning attachment. Following guidance defined in the universal common practice LSP test documents, protected and unprotected CFRP panels were evaluated at 20, 40 and 100KAmps. This report presents analyzed data demonstrating the scientific usefulness of the common practice approach. Descriptions of the common practice CFRP test articles, LSP test bed fixture, and monitoring techniques to capture the electrical, mechanical and thermal parameters during lightning attachment are presented here. Two methods of measuring the electrical currents were evaluated, inductive current probes and a newly developed fiberoptic sensor. Two mechanical displacement methods were also examined, optical laser measurement sensors and a digital imaging correlation camera system. Recommendations are provided to help users implement the common practice test approach and obtain LSP test characterizations comparable across data sets.

Szatkowski, George N.↗
NASA NTRS2018

File Specification for M2AMIP Products: Version Number - 1.0

The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) is an atmospheric reanalysis computed with the Goddard Earth Observing (EOS) System, Version 5.12.4 (GEOS) data assimilation system (Gelaro et al., 2017). To supplement the reanalysis, the GEOS General Circulation Model (GCM) used in MERRA-2 has been used to generate a 10-member ensemble of simulations, configured following the convention of the Atmospheric Model Intercomparison Project (AMIP; Gates et al., 1992). Each ensemble member was initialized using meteorological fields from a different date in November 1979. The AMIP simulations used the sea-surface temperature (SST) and sea-ice boundary conditions that were used in MERRA-2 (Bosilovich et al., 2016). This 10-member ensemble of AMIP simulations, denoted M2AMIP, is available for download in a group of self-describing files, which are documented in this office note. All data collections are provided on the same horizontal grid as MERRA-2. This grid has 576 points in the longitudinal direction and 361 points in the latitudinal direction, corresponding to a resolution of 0.625 degrees by 0.5 degrees. Although data collections are available at this grid, all fields are computed on a cubed-sphere grid with an approximate resolution of 50 km by 50 km and are then spatially interpolated to the latitude-longitude grid. There are no changes in the vertical grids used: variables are provided on either the native vertical grid of 72 model layers, or interpolated to 42 standard pressure levels. Unlike MERRA, no data collections are available at the vertical layer edges. More details on the grid are provided in Section 4. MERRA-2 introduced observation-based precipitation forcing for the land surface parameterization and the corresponding variable PRECTOTCORR in the MERRA-2 FLX (surface turbulent fluxes and related quantities) and LFO (land-surface forcing) collections (see Section 6; Reichle et al., 2017). While this variable is still available for M2AMIP, there was no observation-based forcing, making the value identical to the model derived precipitation, PRECTOT. Similarly, without data assimilation, the values for the analysis increments, D*DTANA, in the tendency and vertically integrated file collections are zero. The M2AMIP data are available for download online through the NASA Center for Climate Simulation (NCCS) DataPortal (https://portal.nccs.nasa.gov/datashare/gmao_m2amip/). Data are arranged in subdirectories based on ensemble member, followed by year and month. Control files that are compatible with the Grid Analysis and Display System (GrADS) are available in the ctl_daily and ctl_monthly directories for the hourly, three hourly, and monthly mean data. Control files for the monthly mean diurnal cycle can be found in the ctl_diurnal subdirectory within the directory for each individual ensemble member.

M2AMIP↗