Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “catalyst utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Propane Dehydrogenation Catalyzed by Supported Group IV (Ti, Zr, Hf) Organometallics on Silicon Nitride

Mesoporous silicon nitride (Si 3 N 4 ) enables access to chemisorbed group IV organometallics catalysts active for propane dehydrogenation (PDH) compared to the organometallic analogues on mesoporous silica under the same reaction conditions. The series of Si 3 N 4 -supported materials are active catalysts, (Zr > Hf > Ti k f = 290, 232, and 162 mol mol Metal -1 h -1 at 450 °C with 2% C 3 H 8 in Ar, respectively) with selectivity above 95%, demonstrating additional examples of Ti and Hf systems for PDH. However, the underlying mechanism of the improved performance relative to oxide supported homologues is not well-understood. Characterization of thermally treated samples (DRIFTS, XAS and SSNMR) and computational modeling of this catalyst series was utilized to differentiate between potential amido - (C-H activation along the M-N bond) and imido - (C-H activation along the M=N bond) mechanisms. Due to remaining mechanistic ambiguity, a Ga analogue was synthesized and evaluated for PDH activity as an indirect probe to experimentally differentiate pathways. An inversion of the oxide/nitride performance trend is observed for the Ga congener which does not form a Ga=N bond, most consistent with different mechanisms dictating the performance of the group IV/Si 3 N 4 catalysts vs Ga/Si 3 N 4 .

heterolytic cleavage↗
DOE OSTI2023

Catalysts and Electrodes for Affordable Hydrogen Generation and Utilization [Slides]

Hydrogen enables energy pathways across applications and sectors in an increasingly interconnected energy system, helping deep decarbonization, economic growth, and jobs creation. Electrochemical Energy Conversion Devices produce "green" H 2 from water: electrolyzers. H 2 is used to produce "green" electricity through fuel cells. There is a need of catalysts to enhance reactions kinetics at the electrodes.

08 HYDROGEN↗
NASA NTRS2011

Development and Progress in Enabling the Photocatalyst Ti02 Visible-Light-Active

Photocatalytic oxidation (PCO) of organic contaminants is a promising air and water quality management approach which offers energy and cost savings compared to thermal catalytic oxidation (TCO). The most widely used photocatalyst, anatase TiO2, has a wide band gap (3.2 eV) and is activated by UV photons. Since solar radiation consists of less than 4% UV, but contains 45% visible light, catalysts capable of utilizing these visible photons need to be developed to make peo approaches more efficient, economical, and safe. Researchers have attempted various approaches to enable TiO2 to be visible-light-active with varied degrees of success'. Strategies attempted thus far fall into three categories based on their electrochemical' mechanisms: 1) narrowing the band gap of TiO2 by implantation of transition metal elements or nonmetal elements such as N, S, and C, 2) modifying electron-transfer processes during PCO by adsorbing sensitizing dyes, and 3) employing light-induced interfacial electron transfer in the heteronanojunction systems consisting of narrow band gap semiconductors represented by metal sulfides and TiO2. There are diverse technical approaches to implement each of these strategies. This paper presents a review of these approaches and results of the photocatalytic activity and photonic efficiency of the end .products under visible light. Although resulting visible-light-active (VLA) photocatalysts show promise, there is often no comparison with unmodified TiO2 under UV. In a limited number of studies where such comparison was provided, the UV-induced catalytic activity of bare TiO2 is much greater than the visible-light-induced catalytic activity of the VLA catalyst. Furthermore, VLA-catalysts have much lower quantum efficiency compared to the approx.50% quantum efficiency of UV-catalysts. This stresses the need for continuing research in this area.

Levine, Lanfang H.↗
DOE OSTI2025

Bulk‐Boundary Correspondence of Semimetal Ru 3 Sn 7 and Topological Surface States on Chemically Realistic Terminations

Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Catalyst-Specific Accelerated Stress Tests in Proton Exchange Membrane Low-Temperature Electrolysis for Intermittent Operation

Device-level stress tests are developed that focus on anode catalyst layer degradation and future anticipated operating conditions, including intermittent load and reduced platinum group metal content. Square-wave cycles with an upper load limit of 2.5 A cm -2 are utilized to screen commercial iridium (Ir) materials. Performance losses are primarily due to decreasing kinetics and are accompanied by catalyst migration into the membrane, worsening catalyst/ionomer integration, and weakening of the catalyst/membrane interface. For ruthenium-containing catalysts, the in situ performances are higher but durabilities lower than Ir baselines, and any performance advantage is lost within the test. Increased loss is likely due to the higher dissolution rate; microscopy confirmed greater degrees of ruthenium migration. For Ir metal or mixed oxides, ex situ activity improvements generally did not translate to in situ performance. The durability, however, is significantly lower and the loss rate increased from 3 (oxide) to 9 (metal) μ V cycle -1 . These results are consistent with historical findings in literature, rationalize the continued use of iridium oxide as a baseline catalyst, and demonstrate that traditional catalyst development approaches may not improve device-level durability when focused on low-cost applications. A shift in focus may therefore be more effective at improving catalyst utilization and lessening load requirements.

08 HYDROGEN↗
DOE OSTI2020

Advanced Electrocatalysis for Energy and Environmental Sustainability via Water and Nitrogen Reactions

Abstract Clean and efficient energy storage and conversion via sustainable water and nitrogen reactions have attracted substantial attention to address the energy and environmental issues due to the overwhelming use of fossil fuels. These electrochemical reactions are crucial for desirable clean energy technologies, including advanced water electrolyzers, hydrogen fuel cells, and ammonia electrosynthesis and utilization. Their sluggish reaction kinetics lead to inefficient energy conversion. Innovative electrocatalysis, i.e., catalysis at the interface between the electrode and electrolyte to facilitate charge transfer and mass transport, plays a vital role in boosting energy conversion efficiency and providing sufficient performance and durability for these energy technologies. Herein, a comprehensive review on recent progress, achievements, and remaining challenges for these electrocatalysis processes related to water (i.e., oxygen evolution reaction, OER, and oxygen reduction reaction, ORR) and nitrogen (i.e., nitrogen reduction reaction, NRR, for ammonia synthesis and ammonia oxidation reaction, AOR, for energy utilization) is provided. Catalysts, electrolytes, and interfaces between the two within electrodes for these electrocatalysis processes are discussed. The primary emphasis is device performance of OER‐related proton exchange membrane (PEM) electrolyzers, ORR‐related PEM fuel cells, NRR‐driven ammonia electrosynthesis from water and nitrogen, and AOR‐related direct ammonia fuel cells.

Li, Yi↗
DOE OSTI2025

Closed‐Loop Recyclable Vitrimer Plastics from PET Waste: A Design for Circularity

Plastics are essential to modern society, but their low recycling rates and inefficient end-of-life management pose a significant environmental challenge. Herein, the efficient strategy for upcycling postconsumer poly(ethylene terephthalate) (PET) waste into robust, closed-loop recyclable vitrimer plastics and composites is presented to address this issue. The catalyst-free aminolysis utilizes readily available amines to deconstruct diverse PET wastes into macromonomers, which are upcycled into vitrimers, exhibiting superior mechanical properties and exceeding the ultimate tensile stress and Young's Modulus of virgin PET by 80% and 150% respectively. These vitrimers exhibit excellent healability, shape memory, thermal reprocessability, and closed-loop chemical recyclability, enabling quantitative macromonomer recovery even from mixed plastic waste streams and glass/carbon fiber reinforced vitrimer (G/CFRV) composites. Furthermore, the vitrimer resin yields robust GFRV and CFRV composites with tensile strengths exceeding those of traditional epoxy composites by 100% and 80%, respectively, while maintaining complete chemical recyclability of both constituent materials. A preliminary technoeconomic analysis confirms the costeffectiveness and competitiveness of the facile PET deconstruction approach, which is potentially adaptable to other condensation polymers. Further, this study presents a facile approach to upcycling plastic waste into circular plastics and composites, offering a sustainable solution to global plastic waste management and fostering a circular economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Phosphoric acid fuel cell platinum use study

The U.S. Department of Energy is promoting the private development of phosphoric acid fuel cell (PAFC) power plants for terrestrial applications. Current PAFC technology utilizes platinum as catalysts in the power electrodes. The possible repercussions that the platinum demand of PAFC power plant commercialization will have on the worldwide supply and price of platinum from the outset of commercialization to the year 2000 are investigated. The platinum demand of PAFC commercialization is estimated by developing forecasts of platinum use per unit of generating capacity and penetration of PAFC power plants into the electric generation market. The ability of the platinum supply market to meet future demands is gauged by assessing the size of platinum reserves and the capability of platinum producers to extract, refine and market sufficient quantities of these reserves. The size and timing of platinum price shifts induced by the added demand of PAFC commercialization are investigated by several analytical methods. Estimates of these price shifts are then used to calculate the subsequent effects on PAFC power plant capital costs.

Lundblad, H. L.↗
DOE OSTI2022

Group transfer polymerization for the production of functional monomers

The present invention provides efficient processes for preparing brush polymers. In general, the process comprises three distinct reaction steps utilizing two separate catalysts. In the first step, the initiating compound comprising norbornene is contacted with a silane in the presence of a catalyst, thereby forming a silated intermediate. This silated intermediate is then contacted with a monomer in the presence of a catalyst via Group Transfer Polymerization (GTP). The resulting compound from GTP is contacted with a ring opening metathesis polymerization (ROMP) catalyst to prepare the brush polymer. Surprisingly, the brush polymers obtained from the above process are accessed in an efficient and rapid GTP methodology as compared to prior methods.

Miyake, Garret↗
DOE OSTI2024

Graphene-transition metal catalyst for hydrogen evolution reaction

Functionalized catalysts for use in a hydrogen evolution reaction (HER) contain nanoparticles containing a transition metal enveloped in layers of graphene, which renders the nanoparticles resistant to passivation while maintaining an optimal ratio of transition metal and transition metal oxide in the nanoparticles. The catalysts can be utilized with anionic exchange polymer membranes for hydrogen production by alkaline water electrolysis.

Mukerjee, Sanjeev↗
NASA NTRS2012

Performance Evaluation of Staged Bosch Process for CO2 Reduction to Produce Life Support Consumables

Utilizing carbon dioxide to produce water and hence oxygen is critical for sustained manned missions in space, and to support both NASA's cabin Atmosphere Revitalization System (ARS) and In-Situ Resource Utilization (ISRU) concepts. For long term missions beyond low Earth orbit, where resupply is significantly more difficult and costly, open loop ARS, like Sabatier, consume inputs such as hydrogen. The Bosch process, on the other hand, has the potential to achieve complete loop closure and is hence a preferred choice. However, current single stage Bosch reactor designs suffer from a large recycle penalty due to slow reaction rates and the inherent limitation in approaching thermodynamic equilibrium. Developmental efforts are seeking to improve upon the efficiency (hence reducing the recycle penalty) of current single stage Bosch reactors which employ traditional steel wool catalysts. Precision Combustion, Inc. (PCI), with support from NASA, has investigated the potential for utilizing catalysts supported over short-contact time Microlith substrates for the Bosch reaction to achieve faster reaction rates, higher conversions, and a reduced recycle flows. Proof-of-concept testing was accomplished for a staged Bosch process by splitting the chemistry in two separate reactors, first being the reverse water-gas-shift (RWGS) and the second being the carbon formation reactor (CFR) via hydrogenation and/or Boudouard. This paper presents the results from this feasibility study at various operating conditions. Additionally, results from two 70 hour durability tests for the RWGS reactor are discussed.

Vilekar, Saurabh A.↗
DOE OSTI2025

Understanding the Active Site Structures and Achieving Catalytic Activity Tuning of Atomically Dispersed FeN 4 Sites for Oxygen Reduction Reaction

Atomically dispersed Fe–—N—C catalysts with high oxygen reduction reaction (ORR) activity have attracted great attention since the last decade. Due to comparable ORR activity and low material cost, they are promising platinum group metal (PGM)-free catalysts that can replace the commercialized Pt/C materials; furthermore, it can facilitate the efficiency of the fuel cell technologies and mitigate dependence on fossil fuels. Great advancements have been made to experimentally optimize the synthesis approach of the Fe–—N—C catalysts, enhance the ORR activity, and improve the catalyst stability. Similarly, recent theoretical studies also provide enriched understanding of the active site structures, properties, and reaction mechanisms. In this review, discussions are made upon utilizing combined experimental and computational spectroscopy to reveal the active site structures, employing mechanistic studies to investigate reaction thermodynamics and kinetics, as well as developing scaling relationships to assist the design and development of future PGM-free catalyst materials. Furthermore, recent advances in studying Fe–—N—C catalysts utilizing electrified surface models and explicit solvation models are also discussed. Not only can these aspects improve the accuracy of theoretical simulation and predictions but also deepen the understanding of the catalyst properties and reaction mechanisms under the effect of surface charges and solvent molecules.

Fe single-atom catalysts↗
DOE OSTI2020

Nanoporous Catalysts for Biomass Conversion

Transforming plant biomass to biofuel and chemicals has become a global effort as results of increasing fuel demand but diminishing fossil-based energy preservation and rising concerns of climate and environmental impact. Various conversion routes involving thermochemical and biological conversions have been established and well-studied. Heterogeneous catalysis is playing a critical role in the biomass conversion and, with some unique catalytic properties, nanoporous catalysts have been extensively utilized in catalytic process of biomass conversion and exhibited exciting catalytic performance. This chapter will be devoted to nanoporous catalysts used in biomass conversion. It will start with a brief introduction of current biomass conversion technologies and then a detailed review of the application of various nanoporous materials in a large diversity of catalytic reactions in biomass conversion. The nanoporous materials include zeolites and zeotypes, metal-organic frameworks (MOFs), nanoporous carbons and carbon nitrides, nanoporous oxides, hydroxides and complex oxide forms, porous organic polymers (POPs), and porous metals.

Shi, Hui↗
DOE OSTI2021

BETO 2021 Peer Review - Advanced Catalyst Synthesis and Characterization (ACSC) Project WBS 2.5.4.304; 303; 305

The Advanced Catalyst Synthesis and Characterization (ACSC) project, in close collaboration with the Chemical Catalysis for Bioenergy (ChemCatBio) Consortium enabling projects, CatCost, and the Engineering of Catalyst Scale-Up project, (1) provides fundamental insight into working catalysts leading to actionable recommendations for all of the ChemCatBio catalysis projects, (2) addresses overarching catalysis challenges central to the ChemCatBio Consortium, and (3) adapts and applies new synthesis methodologies and in situ/operando characterization capabilities to meet the evolving needs of the catalysis projects. The outcome is a transition from empirical catalyst development to rational design through the prediction of materials with targeted properties based on advanced characterization combined with computational modeling, and the synthesis of next generation catalysts with predicted structures that yield demonstrated improvements in catalytic performance. In FY18, the ACSC helped to demonstrate the utility of the complete catalyst and process development cycle for dimethyl ether to high-octane gasoline over metal-modified zeolite catalysts for the Upgrading of C1 Building Blocks project, and in FY21 will leverage capabilities, expertise, and computational models established for this effort to target next-generation catalysts for ethanol to distillates for the Upgrading of C2 Intermediates project with enhanced performance in half the time.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Tailoring activity of iron phthalocyanine by edge-nitrogen sites induced electronic delocalization

Fe-N-C catalysts have been recognized as the most satisfactory candidates alternatively to Pt-based catalysts for oxygen reduction reaction (ORR). However, fine-tailoring of their intrinsic ORR catalytic activity still remains a great challenge due to the inferior accessibility and intrinsic activity of FeN x moieties. Herein, one order of magnitude activity enhancement of pristine Fe-N-C through cooperating with nitrogen-doped carbon micro-flower is achieved. The axial coordination effect between Fe active center and nitrogen atoms in support can break the electronic distribution symmetry of FeN x moieties and induce the electron delocalization on Fe active center and the electron localization on N, respectively, which favor the adsorption behavior of *OH intermediate. As a result, the catalyst exhibits a remarkable half-wave potential of 0.9 V and a high kinetic current density of 74.04 mA cm -2 at 0.85 V. In addition, when utilized as a cathode catalyst of liquid Zn-air batteries (ZABs), it possesses excellent electrochemical performance, for example, a high open circuit voltage (OCV) and peak power density of 1.59 V and 170.09 mW cm -2 , respectively. In conclusion, this work provides a new understanding into the activity enhancement mechanism of Fe-N-C catalysts, and inspires electronic delocalization of active sites for adjusting catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

MgO(111) Nanocatalyst for Biomass Conversion: A Study of Carbon Coating Effects on Catalyst Faceting and Performance

Solid base metal oxide catalysts such as MgO offer utility in a wide variety of syntheses from pharmaceuticals to fuels. The (111) facet of MgO shows enhanced, unique properties relative to the other facets. Carbon coatings have emerged as a promising modification to impart metal oxide catalyst stability. Here, we report the synthesis, characterization, and catalytic properties of commercial MgO, MgO(111), and carbon coated derivatives thereof for 2-pentanone condensation. The dimer and trimer products of this reaction can be used as precursors for biofuels upon oxygen removal and thus have relevance in environmental sustainability. Additionally, MgO(111) maintained impressive selectivity towards the dimer product after carbon coating, whereas the other catalysts experienced a decrease in conversion and selectivity as a consequence of the carbon coating. Our findings highlight the catalytic efficacy of MgO(111), provide insight into carbon coating for catalyst stability, and pave the way for continued mechanistic investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Towards improved conversion of wet waste to jet fuel with atomic layer deposition-coated hydrodeoxygenation catalysts

The conversion of wet waste-derived volatile fatty acids into jet fuel-range hydrocarbons is a promising route for increasing the production of sustainable aviation fuel; however, the cost and moderate alkane selectivity of Pt-based hydrodeoxygenation catalysts present challenges for commercialization. Here, to address this, we used atomic layer deposition to apply TiO 2 overcoats to Pt/Al 2 O 3 catalysts and create new interface sites that exhibited 8 times higher site time yield of the desirable n-alkane product than uncoated catalyst. Through TPR/TPD, XPS, CO DRIFTS, and DFT calculations, we found that the increased selectivity of the ALD-coated catalyst was due to the creation of O vacancies at the Pt-TiO 2 interface under reducing conditions, resulting in new Ti 3+ acid sites near the active metal. Maximum conversion and alkane selectivity during HDO was achieved with an ALD-coated 0.5% wt Pt catalyst, indicating that TiO 2 ALD can be used to maximize the utility of precious-metal catalysts.

09 BIOMASS FUELS↗
NASA NTRS2011

Two Catalysts for Selective Oxidation of Contaminant Gases

Two catalysts for the selective oxidation of trace amounts of contaminant gases in air have been developed for use aboard the International Space Station. These catalysts might also be useful for reducing concentrations of fumes in terrestrial industrial facilities especially facilities that use halocarbons as solvents, refrigerant liquids, and foaming agents, as well as facilities that generate or utilize ammonia. The first catalyst is of the supported-precious-metal type. This catalyst is highly active for the oxidation of halocarbons, hydrocarbons, and oxygenates at low concentrations in air. This catalyst is more active for the oxidation of hydrocarbons and halocarbons than are competing catalysts developed in recent years. This catalyst completely converts these airborne contaminant gases to carbon dioxide, water, and mineral acids that can be easily removed from the air, and does not make any chlorine gas in the process. The catalyst is thermally stable and is not poisoned by chlorine or fluorine atoms produced on its surface during the destruction of a halocarbon. In addition, the catalyst can selectively oxidize ammonia to nitrogen at a temperature between 200 and 260 C, without making nitrogen oxides, which are toxic. The temperature of 260 C is higher than the operational temperature of any other precious-metal catalyst that can selectively oxidize ammonia. The purpose of the platinum in this catalyst is to oxidize hydrocarbons and to ensure that the oxidation of halocarbons goes to completion. However, the platinum exhibits little or no activity for initiating the destruction of halocarbons. Instead, the attack on the halocarbons is initiated by the support. The support also provides a high surface area for exposure of the platinum. Moreover, the support resists deactivation or destruction by halogens released during the destruction of halocarbons. The second catalyst is of the supported- metal-oxide type. This catalyst can selectively oxidize ammonia to nitrogen at temperatures up to 400 C, without producing nitrogen oxides. This catalyst converts ammonia completely to nitrogen, even when the concentration of ammonia is very low. No other catalyst is known to oxidize ammonia selectively at such a high temperature and low concentration. Both the metal oxide and the support contribute to the activity and selectivity of this catalyst.

Wright, John D.↗