Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “casing integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Implementation of low-burnup swelling focused assessment case and enhancement of FIPD-BISON integration framework

This report summarizes the activities and achievements made by Argonne National Laboratory for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) BISON code metallic fuel validation and verification (V&V) project in FY2023, with a focus on the capability development and assessment case development for steady state irradiation experiments. The X423 IFR experiment assessment case, which is focused on the evaluation of low burnup swelling behavior of both binary and ternary metallic fuel, has been developed. It covers 58 fuel pins with various fuel compositions and 158 sets of post-irradiation examination (PIE) data with burnup ranging from ~0.5 at.% to ~5.0 at.%, providing a powerful tool within BISON for the calibration, evaluation, verification and validation of both existing and future metallic fuel swelling models at low burnup. Meanwhile, the X447 IFR experiment assessment case established in FY2022 was enhanced to utilize the latest advanced features in BISON, such as automatic differentiation and Mortar contact models. With such enhancements, especially the Mortar mechanical contact model with friction, BISON is now capable of predicting axial fuel growth that is consistent with experimental measurements. Additionally, during the development, gaps and potential scopes were identified and explorative efforts were made, providing insight for future works.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Pumped Storage Hydropower Augmented with Pressurized Air: The Ground-Level Integrated Diverse Energy Storage (GLIDES) System — GLIDES System Configurations and Use Cases

Energy storage is essential for cost-effective integration of variable renewable energy sources to support a low-carbon grid. It is also a key enabler of a modern grid infrastructure for demand management. However, several main challenges remain for different kind of energy storage technologies in grid scale deployment. Currently, the largest source of utility-scale storage and long-duration storage in the US is pumped storage hydropower (PSH). Prospect of growth in conventional PSH faces challenges that have limited its deployment over the last three decades, including high capital costs and long deployment timelines. Batteries have high energy densities and are the primary technology of choice for small-scale energy storage. Compressed air energy storage (CAES) is another large-scale energy storage technology, but there are few plants deployed worldwide. They suffer from their low round trip efficiency (RTE) due to the use of high-pressure air compressors. To address some of the challenges associated with these various storage technologies, the Ground-Level Integrated Diverse Energy Storage (GLIDES) is a modular PSH technology that was invented in 2015 at Oak Ridge National Laboratory. It utilizes gas compression to store electric energy. GLIDES stores energy by compressing gas using a liquid piston in high-pressure vessels. In doing so the vessels act as the upper reservoir in conventional PSH. Initially, the vessels are filled with gas to a prescribed pressure. To store energy, GLIDES uses a hydraulic piston pump to pump water into the pressurized vessels. As the water volume increases inside the vessels, water acts as a hydraulic piston compressing the gas on top of it. This process can be thought of as pumping water from the lower reservoir to the higher reservoir in PSH, increasing the water head. To dispatch the stored energy, the high-head water in the vessel is discharge through a high head Pelton hydraulic turbine that is connected to an electric generator. Employing high-pressure vessels enables GLIDES to reach water heads ~10-80 times higher than conventional PSH, achieving ~40 times higher energy densities, and overcomes the geographic limitation of conventional PSH. Although its energy density is much lower than that of batteries, GLIDES holds the potential advantages of having long service life, ease of system integration and being less hazardous over batteries. GLIDES prospective scalability could make it suitable for wide range of applications from behind the meter storage in buildings to grid-scale storage. It also makes it suitable for installations in densely populated urban areas where energy storage is most needed and real estate is limited. Over the last 5 years, work has focused on increasing GLIDES’ energy density, decreasing its initial capital cost of the system, and increasing its revenue potential. Several designs were developed and prototyped to verify and demonstrate the improvement in energy density. The latest prototype achieved energy density of 1.21 kWh/m 3 . Our analysis showed that it could achieve up to 1.7 kWh/m 3 with a mixture of air and carbon dioxide as the gas being compressed.

13 HYDRO ENERGY↗
DOE OSTI2022

Higher Education Buildings Recognized for Integrated Controls for HVAC and Lighting Systems - Case Study: California State University Dominguez Hills and University of Minnesota

This case study describes connected lighting system projects on two college campuses; Cal State Dominguez Hills and the University of Minnesota both implemented lighting and controls upgrades at mixed-use buildings, including advanced sensors, HVAC integration, and plug load control. Both projects were recognized by DOE's Integrated Lighting Campaign.

integrated lighting, higher education, college, un↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

In this paper a partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z=0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

A partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z = 0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
DOE OSTI2022

Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies

This article presents and discusses the lessons learned from the monitoring of 25 integrated daylighting and electric lighting international case study projects. The case studies consist of real occupied buildings that have been monitored as part of the International Energy Agency (IEA) SHC Task 61/EBC Annex 77 Programme. The general goal of the case studies was to balance lighting energy use with occupants’ visual and non-visual requirements. This was achieved using innovative solutions for daylighting and electric lighting with advanced controls, but also implementing simple and out-of-the-box strategies. The findings suggest that energy demands for lighting can significantly be reduced by combining sensible daylight provision, efficient lighting sources, and advances in controls. Yet, the effective achievement of project goals requires adequate monitoring, fine-tuning, and verification. The findings also suggest that the adoption of “integrative” lighting – that is, lighting systems that address both visual and non-visual responses – is getting increasingly popular. Catering to non-visual requirements will likely drive further innovation in lighting technology. Currently, there is limited investment available for developing daylighting systems for integrative lighting, and the current related electric strategies often come at the risk of energy rebound effects. Overall, providing daylighting and understanding user requirements are fundamental steps towards achieving quality projects, with potential benefits beyond saving energy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

A short note on the accuracy of the discontinuous Galerkin method with reentrant faces

In this work, we study the convergence of the discontinuous Galerkin (DG) method applied to the advection–reaction equation on meshes with reentrant faces. On such meshes, the upwind numerical flux is not smooth, and so the numerical integration of the resulting face terms can only be expected to be first-order accurate. Despite this inexact integration, we prove that the DG method converges with order $\mathscr{O}$(h p+1/2 ), which is the same rate as in the case of exact integration. Consequently, specialized quadrature rules that accurately integrate the non-smooth numerical fluxes are not required for high-order accuracy. These results are numerically corroborated on examples of linear advection and discrete ordinates transport equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Integrated Controls for Plug Loads and Lighting Systems - Case Study: Minnesota DOT Cedar Avenue Truck Station

This case study highlights the strategies the Minnesota Department of Transportation used at Cedar Avenue Truck Station for integrating plug load and lighting systems. An integrated controls pilot project with retrofit installation was conducted from October 2019 to April 2020 and was recognized by DOE's Integrated Lighting Campaign.

integrated lighting, lighting, controls, plug load↗
DOE OSTI2021

Development and application of marginal likelihood optimization for integral parameter adjustment

When adjusting nuclear data with integral experiments, care must be taken that spurious adjustments are not made by assimilating poorly characterized integral parameters. If there are unaccounted for biases or poorly estimated uncertainties in the calculated and experimental values for an integral parameter, the Bayesian data assimilation may adjust the nuclear data in a manner that does not reflect the physics of the integral parameter. To identify and lessen the impact of these inconsistent integral parameters, in this study we present a Marginal Likelihood Optimization algorithm. In a data-driven way, the marginalized likelihood is used to modulate hyperparameter terms that decrease the influence of inconsistent integral parameters on the adjustment. The advantage of this approach over other methods in the literature is that it incorporates correlation information and does not remove an integral parameter from the adjustment. Herein, we present and motivate the algorithm, and apply it to an integral data assimilation case study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1973

The Fokker-Planck coefficient for pitch-angle scattering of cosmic rays

For the case of homogeneous, isotropic magnetic field fluctuations, it is shown that most theories which are based on the quasi-linear and adiabatic approximation yield the same integral for the Fokker-Planck coefficient for the pitch angle scattering of cosmic rays. For example, despite apparent differences, the theories due to Jokipii and to Klimas and Sandri yield the same integral. It is also shown, however, that this integral in most cases has been evaluated incorrectly in the past. For large pitch angles these errors become significant, and for pitch angles of 90 deg the actual Fokker-Planck coefficient contains a delta function. The implications for these corrections relating cosmic ray diffusion coefficients to observed properties of the interplanetary magnetic field are discussed.

Fisk, L. A.↗
NASA NTRS1974

The Fokker-Planck coefficient for pitch-angle scattering of cosmic rays

For the case of homogeneous, isotropic magnetic field fluctuations, it is shown that most theories which are based on the quasi-linear and adiabatic approximations yield the same integral for the Fokker-Planck coefficient for the pitch-angle scattering of cosmic rays. For example, despite apparent differences, the theories due to Jokipii and to Klimas and Sandri yield the same integral. It is also shown, however, that this integral in most cases has been evaluated incorrectly in the past. For small pitch angles, the errors in previous evaluations are fortuitously of minor importance. For large pitch angles, however, these errors become more significant; and for pitch angles of 90 deg, the actual Fokker-Planck coefficient contains a delta function which has been overlooked in the past. The implications of these corrections on the possibility of relating cosmic-ray diffusion coefficients to observed properties of the interplanetary magnetic field are discussed.

Fisk, L. A.↗
DOE OSTI2025

Developing a Prototype Methodology to Rank CO2-EOR Wells and Assess Their Reuse Potential for Geologic Carbon Storage

This paper presents a prototype methodology to assess the possible transition of Class II carbon dioxide-enhanced oil recovery (CO2-EOR) wells to Class VI wells. The focus is on wellbore construction materials—casing, cement, tubing, and the packer—and includes comprehensive workflows to evaluate these materials, with primary emphasis on compliance with Environmental Protection Agency (EPA) Class VI well construction and conversion guidelines. These workflows systematically assess material properties and performance criteria to ensure regulatory compliance and optimize long-term wellbore integrity and functionality. Utilizing Python scripts and JavaScript Object Notation (JSON) representations, the study automates checks on digitized Texas Railroad Commission (TRRC) data to rank wells based on workflow criteria. By emphasizing critical factors such as casing integrity, cementing techniques, tubing compatibility, and packer selection, the methodology helps well owners and operators prioritize wells for potential reuse as CO2 injection wells. Given limitations in digitized data, manual user verification is required in some sections. Future improvements include integrating non-digitized data through web scraping and machine learning techniques. This research serves as a practical guide for stakeholders, supporting environmental compliance and sustainable well operations.

geologic carbon sequestration↗
NASA NTRS1990

Qualification of the RSRM case membrane case-to-insulation bondline inspection using the Thiokol Corporation ultrasonic RSRM bondline inspection system

Qualification testing of Combustion Engineering's AMDATA Intraspect/98 Data Acquisition and Imaging System that applies to the redesigned solid rocket motor (RSRM) case membrane case-to-insulation bondline inspection was performed. Testing was performed at M-67, the Thiokol Corp. RSRM Assembly Facility. The purpose of the inspection was to verify the integrity of the case membrane case-to-insulation bondline. The case membrane scanner was calibrated on the redesigned solid rocket motor case segment calibration standard, which had an intentional 1.0 by 1.0 in. case-to-insulation unbond. The case membrane scanner was then used to scan a 20 by 20 in. membrane area of the case segment. Calibration of the scanner was then rechecked on the calibration standard to ensure that the calibration settings did not change during the case membrane scan. This procedure was successfully performed five times to qualify the unbond detection capability of the case membrane scanner.

Cook, M.↗
NASA NTRS1995

Using an architectural approach to integrate heterogeneous, distributed software components

Many computer programs cannot be easily integrated because their components are distributed and heterogeneous, i.e., they are implemented in diverse programming languages, use different data representation formats, or their runtime environments are incompatible. In many cases, programs are integrated by modifying their components or interposing mechanisms that handle communication and conversion tasks. For example, remote procedure call (RPC) helps integrate heterogeneous, distributed programs. When configuring such programs, however, mechanisms like RPC must be used explicitly by software developers in order to integrate collections of diverse components. Each collection may require a unique integration solution. This paper describes improvements to the concepts of software packaging and some of our experiences in constructing complex software systems from a wide variety of components in different execution environments. Software packaging is a process that automatically determines how to integrate a diverse collection of computer programs based on the types of components involved and the capabilities of available translators and adapters in an environment. Software packaging provides a context that relates such mechanisms to software integration processes and reduces the cost of configuring applications whose components are distributed or implemented in different programming languages. Our software packaging tool subsumes traditional integration tools like UNIX make by providing a rule-based approach to software integration that is independent of execution environments.

Callahan, John R.↗
NASA NTRS1982

Supersonic wing-body center of pressure with finite afterbodies

Closed-form formulas for the effects of finite afterbodies on the longitudinal center of pressure location in the presence of a wing at supersonic speeds are presented, along with solutions for the case of negative afterbodies. A double integral is developed for the case of subsonic and supersonic leading edges and no afterbody and full afterbody. Attention is also given to the full/infinite body case, noting that a proportional variation of the pitching moment with the lift is found.

Vira, N. R.↗
NASA NTRS1992

Toward achieving global sole means radionavigation systems

This paper briefly reviews tentative requirements for global, earth-referenced sole means of navigation systems with emphasis on integrity and availability. These requirements can be allocated to integrated navigation system architectures based on for instance GPS, GLONASS, VOR/DME, TACAN, Omega, Chayka, and Loran-C. Fault detection and isolation techniques (FDI) for integrated radio navigation systems are presented. The FDI algorithm provides a protection radius with a specified confidence level as a function of measurement geometry and algorithm requirements. This is followed by a case study of integrated GPS/Loran-C.

Vangraas, F.↗
NASA NTRSDate not supplied

Towards A Flexible Data Fusion Tool Incorporating Model, Satellite, Regulatory Monitor and Low-Cost Sensor Data for Air Quality Estimation and Forecasting

Air quality managers, researchers, and concerned community scientists around the world have a variety of sources for air quality information, ranging from traditional regulatory monitoring networks and atmospheric chemistry models to remote sensing data products and low-cost sensor networks. However, the ability to incorporate data from these disparate sources and synthesize a comprehensive overview of the local air quality situation remains a considerable barrier for many end-users. This presentation will outline a tool, currently in development, which will address this need using a flexible data fusion approach. The tool will make use of air quality forecast model outputs (primarily from the NASA GEOS-CF composition forecast modeling system), satellite remote sensing data (from instruments including MODIS, VIIRS, TROPOMI, plus TEMPO for the US when available), and in-situ data from official regulatory and/or low-cost networks where these are available. The ability to incorporate data from low-cost sensor networks will be a key feature of the tool; it will make use of other available data sources to calibrate the low-cost sensor data on a regional scale, then use these calibrated low-cost sensor data for localized updating to resolve finer-scale air quality patterns. Development of this tool is taking place with the help of national and international partners and end-user groups, coordinated through the US EPA and the United Nations Environment Programme (UNEP). The tool is being developed on the Google Earth Engine cloud computing platform to facilitate integration of diverse data sources and free access by a broad community of end-users. Stewardship of the tool will be passed to US EPA and UNEP to support future activities with end-users in the US and around the world, and the tool itself will remain freely accessible. We hope that this tool will lower the barrier to entry for various user groups worldwide, including community scientists, who struggle to integrate disparate data sources to gain insight into their local air quality situations. This presentation will cover the early stages of the development of the tool, including the underlying methods and some pilot case studies in integrating low-cost sensor data.

global models↗
DOE OSTI2022

BASIN-3D: A brokering framework to integrate diverse environmental data

Diverse observational and simulation datasets are needed to understand and predict complex ecosystem behavior over seasonal to decadal and century time-scales. Integration of these datasets poses a major barrier towards advancing environmental science, particularly due to differences in the structure and formats of data provided by various sources. Here, we describe BASIN-3D (Broker for Assimilation, Synthesis and Integration of eNvironmental Diverse, Distributed Datasets), a data integration framework designed to dynamically retrieve and transform heterogeneous data from different sources into a common format to provide an integrated view. BASIN-3D enables users to adopt a standardized approach for data retrieval and avoid customizations for the data type or source. We demonstrate the value of BASIN-3D with two use cases that require integration of data from regional to watershed spatial scales. The first application uses the BASIN-3D Python library to integrate time-series hydrological and meteorological data to provide standardized inputs to analytical and machine learning codes in order to predict the impacts of hydrological disturbances on large river corridors of the United States. The second application uses the BASIN-3D Django framework to integrate diverse time-series data in a mountainous watershed in East River, Colorado, United States to enable scientific researchers to explore and download data through an interactive web portal. Thus, BASIN-3D can be used to support data integration for both web-based tools, as well as data analytics using Python scripting and extensions like Jupyter notebooks. The framework is expected to be transferable to and useful for many other field and modeling studies.

Varadharajan, C↗