Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bulk solvent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Mechanism of ion pairing–induced co-ion penetration into the stern layer

In classical electric double layer (EDL) theory, co-ions—ions carrying the same charge as the electrode—are assumed to be excluded from the Stern layer because of electrostatic repulsion. However, ion pairing with adsorbed counterions may enable co-ions to access the EDL, a phenomenon that remains underexplored. Key questions therefore remain unresolved, including how deeply co-ions penetrate, how ion-specific properties govern them, and how ion pairing within the EDL differs from bulk solution. Here, in this study, we employ molecular dynamics simulations combined with well-tempered metadynamics to quantify co-ion penetration and ion-pairing thermodynamics at positively charged Mg-Al layered double hydroxide interfaces (σ = +20.6 μC/cm 2 ) in aqueous chloride electrolytes across 0.005–3 M range. We reveal a concentration-driven crossover: at dilute conditions, counterion–co-ion contact ion pairing (CIP) is thermodynamically unfavorable or only weakly favorable (ΔG CIP = +0.12 kcal/mol for Li + to −0.42 kcal/mol for K + ), leading to co-ion exclusion. As concentration increases (≥0.5 M), enhanced screening reduces surface repulsion and stabilizes CIP thermodynamics (ΔG CIP = −0.89 kcal/mol for Li + to −1.05 kcal/mol for K + at 3 M), enabling monovalent co-ions to penetrate the Stern layer following the hydration hierarchy K + > Na + > Li + , while divalent co-ions (Mg 2+ , Ca 2+ ) remain in the diffuse layer, forming only solvent-separated pairs. Comparison with bulk solution shows interfacial ion pairing is suppressed at low concentrations but converges to bulk-like thermodynamics at high concentrations, indicating surface effects vanish under strong screening. These results establish a quantitative framework linking ion-pairing thermodynamics to co-ion penetration and providing strategies to design electrochemical interfaces.

Co-ion penetration↗

Results of Analyses of the Next Generation Solvent for Parsons

Savannah River National Laboratory (SRNL) prepared a nominal 150 gallon batch of Next Generation Solvent (NGS) for Parsons. This material was then analyzed and tested for cesium mass transfer efficiency. The bulk of the results indicate that the solvent is qualified as acceptable for use in the upcoming pilot-scale testing at Parsons Technology Center. This report describes the analysis and testing of a batch of Next Generation Solvent (NGS) prepared in support of pilot-scale testing in the Parsons Technology Center. A total of ~150 gallons of NGS solvent was prepared in late November of 2011. Details for the work are contained in a controlled laboratory notebook. Analysis of the Parsons NGS solvent indicates that the material is acceptable for use. SRNL is continuing to improve the analytical method for the guanidine.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Accelerated reactions in field desorption mass spectrometry

Field desorption mass spectrometry under ambient conditions is used to study solution-phase organic reactions in micro-volumes. Reagent solution is transferred onto the microdendrites of the field emitter, and reaction products are examined online by mass spectrometry. Three reactions, hydrazone formation by phenyl hydrazine and indoline-2,3-dione, the Katritzky reaction between a pyrylium salt and anisidine, and the Hantzsch synthesis of 1,4-dihydropyridine, were investigated, and reaction acceleration was observed to different extents. The increase in rate relative to the corresponding bulk reactions is attributed to solvent evaporation (simple concentration effect) and to the increase of surface-to-volume ratio (enhanced interfacial reactions). A distinguishing feature of this method of reaction acceleration, relative to that based on nano electrospray ionization, is the observation of radical cations and the formation of radical cation products. The research also breaks new ground in using field emitters at atmospheric pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond Laser Desorption Postionization MS vs ToF-SIMS Imaging for Uncovering Biomarkers Buried in Geological Samples

The study of lipid molecular fossils by traditional biomarker analysis requires bulk sample crushing, followed by solvent extraction, and then the analysis of the extract by gas chromatography-mass spectrometry (GC–MS). This traditional analysis mixes all organic compounds in the sample regardless of their origins, with a loss of information on the spatial distribution of organic molecules within the sample. These shortcomings can be overcome using the chemical mapping of intact samples. Spectroscopic techniques such as UV fluorescence or Raman spectroscopy, laser ablation inductively coupled plasma mass spectrometry, and time-of-flight secondary ion mass spectrometry (ToF-SIMS) are among those elemental and molecular mapping techniques. This study employed femtosecond (fs) laser ablation combined with single-photon ionization, a method called fs-laser desorption postionization mass spectrometry (fs-LDPI-MS). In this work, a pulsed ~75 fs, 800 nm laser was used to ablate the geological sample, which was then photoionized after a few microseconds by a pulsed 7.9 eV vacuum ultraviolet laser. An organic carbon-rich geological sample was used for this study to map hydrocarbon biomarkers in sediments that were previously studied by GC–MS. The petrography of this sample was examined by optical and fluorescence microscopy. It is demonstrated here that fs-LDPI-MS combined with petrography for multimodal imaging can expose buried compounds within the sample via in situ layer removal. When used in conjunction with traditional organic geochemical analysis, this method has the potential to determine the spatial distribution of organic biomarkers in geological material. Finally, fs-LDPI-MS imaging data are compared with ToF-SIMS imaging that is commonly used for such studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis Characterization and Electrospinning of Architecturally-Discrete Isotactic-Atactic-Isotactic Triblock Stereoblock Polypropene Elastomers

Stereochemically homogeneous and architecturally discrete isotactic-atactic-isotactic triblock stereoblock PP (sbPP) thermoplastic elastomers in which the block lengths for each domain type can be varied in programmed fashion while keeping total molecular weight and molecular weight polydispersity the same has been achieved for the first time. Five sbPP materials were prepared: sbPP-1 (6iso-88a-6iso), total isotactic content, 12%; sbPP-2 (12iso-76a-12iso), 24%; sbPP-3 (18iso-64a-18iso), 36%; sbPP-4 (24iso-50a-26iso), 50%; and sbPP-5 (20iso-64a-33iso), 53%. All five sbPP materials were successfully processed by solution-based electrospinning to provide fiberous mats with feature sizes on the nanometer to micrometer length scale. Extensive characterization by analytical (SEM, AFM, tensile testing, DSC,), spectroscopic (FT-IR, FT-Raman), and synchrotron X-ray diffraction techniques of bulk samples, electrospun fibers and solvent cast films of the sbPP samples revealed well-defined trends in elastic properties, morphologies and crystallinity that are associated with a higher degree of crystallinity that emerges with higher isotactic contents. The results of these investigations serve to provide an important foundation that can be used to potentially identify the best combination of stereoerror level incorporation within the isotactic domains and total isotactic content for these architecturally discrete sb-PP materials for maximizing desirable elastomeric traits and solution-based (electrospinning) processing methodology with the goal of achieving the best possible structural forms for potential product applications.

36 MATERIALS SCIENCE↗

Order of wetting transitions in electrolyte solutions

For wetting films in dilute electrolyte solutions close to charged walls we present analytic expressions for their effective interface potentials. The analysis of these expressions renders the conditions under which corresponding wetting transitions can be first- or second-order. Within mean field theory we consider two models, one with short- and one with long-ranged solvent-solvent and solvent-wall interactions. The analytic results reveal in a transparent way that wetting transitions in electrolyte solutions, which occur far away from their critical point (i.e., the bulk correlation length is less than half of the Debye length) are always first-order if the solvent-solvent and solvent-wall interactions are short-ranged. In contrast, wetting transitions close to the bulk critical point of the solvent (i.e., the bulk correlation length is larger than the Debye length) exhibit the same wetting behavior as the pure, i.e., salt-free, solvent. If the salt-free solvent is governed by long-ranged solvent-solvent as well as long-ranged solvent-wall interactions and exhibits critical wetting, adding salt can cause the occurrence of an ion-induced first-order thin-thick transition which precedes the subsequent continuous wetting as for the salt-free solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing the Efficiency of Organic Photovoltaics by a Photoactive Molecular Mediator

High boiling-point solvent additives, such as 1,8-diiodooctane, have been widely used to tune nanoscale phase morphology for increased efficiency in bulk heterojunction organic solar cells. However, liquid-state solvent additives remain in the active films for extended times and later migrate or evaporate from the films, leading to unstable device performance. Here, a solid-state photoactive molecular mediator, namely N(BAI) 3 , is reported that could be employed to replace the commonly used solvent additives to tune the morphology of bulk heterojunction films for improved device performance. The N(BAI) 3 mediator not only resides in the active films locally to fine tune the phase morphology, but also contributes to the additional absorption of the active films, leading to ~11% enhancement of power conversion efficiency of P3HT:PC 60 BM devices. Comparative studies are carried out to probe the nanoscale morphologies using grazing incidence wide-angle X-ray scattering and complementary neutron reflectometry. The use of 1 wt% N(BAI) 3 is found to effectively tune the packing of P3HT, presumably through balanced π-interactions endowed by its large conjugated π surface, and to promote the formation of a PC 60 BM-rich top interfacial layer. Finally, these findings open up a new way to effectively tailor the phase morphology by photoactive molecular mediators in organic photovoltaics.

14 SOLAR ENERGY↗

Solution influence on biomolecular equilibria - Nucleic acid base associations

Various attempts to construct an understanding of the influence of solution environment on biomolecular equilibria at the molecular level using computer simulation are discussed. First, the application of the formal statistical thermodynamic program for investigating biomolecular equilibria in solution is presented, addressing modeling and conceptual simplications such as perturbative methods, long-range interaction approximations, surface thermodynamics, and hydration shell. Then, Monte Carlo calculations on the associations of nucleic acid bases in both polar and nonpolar solvents such as water and carbon tetrachloride are carried out. The solvent contribution to the enthalpy of base association is positive (destabilizing) in both polar and nonpolar solvents while negative enthalpies for stacked complexes are obtained only when the solute-solute in vacuo energy is added to the total energy. The release upon association of solvent molecules from the first hydration layer around a solute to the bulk is accompanied by an increase in solute-solvent energy and decrease in solvent-solvent energy. The techniques presented are expectd to displace less molecular and more heuristic modeling of biomolecular equilibria in solution.

Pohorille, A.↗

Unravelling donor–acceptor film morphology formation for environmentally-friendly OPV ink formulations

The challenge of coating organic photovoltaics (OPV) from green solvents is to achieve the required nanostructured interpenetrating network of donor and acceptor domains based on a rational choice of solvent approach as opposed to the usual trial-and-error methods. We demonstrate here that we can achieve a bicontinuous interpenetrating network with nanoscale phase separation for the chosen donor–acceptor material system poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl]:phenyl-C 61 butyric acid methyl ester (TQ1:PC 61 BM) when processing from green solvent ink formulations. This structure is achieved by first calculating the Hansen solubility parameters (HSP) of the donor and acceptor materials, followed by careful choice of solvents with selective relative solubilities for the two materials based on the desired order of precipitation necessary for forming a nanostructured interdigitated network morphology. We found that the relative distances in Hansen space (R a ) between TQ1 and the primary solvent, on the one hand, and PC 61 BM and the primary solvent, on the other hand, could be correlated to the donor–acceptor morphology for the formulations based on the solvents d-limonene, anisole, and 2-methyl anisole, as well as the halogenated reference solvent o-dichlorobenzene. This nanostructured blend film morphology was characterised with scanning transmission X-ray microscopy (STXM) and transmission electron microscopy (TEM), and the film surface composition was analysed by near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Hansen solubility theory, based on solution thermodynamics, has been used and we propose an HSP-based method that is a general platform for the rational design of ink formulations for solution-based organic electronics, in particular facilitating the green solvent transition of organic photovoltaics. Our results show that the bulk heterojunction morphology for a donor–acceptor system processed from customised solvent mixtures can be predicted by the HSP-based method with good reliability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: Does a single CH{sub 3}CN molecule attached to Ru(bipy){sub 3}{sup 2+} affect its absorption spectrum?

Tris(bipyridine)ruthenium(II) (Ru(bipy){sub 3}{sup 2+}) is a prototypical transition metal coordination complex whose photophysical properties have attracted considerable attention. A much debated issue is whether the metal-to-ligand charge transfer (MLCT) transition that accounts for the complex’s beautiful red color is fully delocalized across all three bipyridine ligands or located on just one ligand. Here, we show based on gas-phase action spectroscopy that attachment of a single acetonitrile molecule does not change the absorption spectrum from that of the bare ions, which is indicative of a delocalized state. However, the gas-phase spectra of the bare and one solvent molecule complexes are significantly blueshifted relative to that obtained in bulk acetonitrile, which suggests that in solution the polarizability of many solvent molecules working together can localize the MLCT state. Our data clearly show that more than one solvent molecule is needed to break the symmetry of the MLCT excited state and reproduce its solution-phase characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amphilic Water-Lean Carbon Capture Solvent Wetting Behavior through Decomposition by Stainless-Steel Interfaces

In this work, we report on a combined experimental and theoretical study of the wetting and reactivity of water-lean carbon capture solvents on the surface of common column packing materials. Paradoxically, we find that these solvents are equally able to wet hydrophobic and hydrophilic surfaces. The solvents are amphiphilic and are able to adapt to any interfacial environment due to their inherent heterogeneous molecular structure. Ab initio molecular dynamics indicates that these structures enable the formation of a strong adlayer on the surface of hydrophilic surfaces like oxidized steel which promotes solvent decomposition akin to hydrolysis from surface oxides and hydroxides. This decomposition passivates the surface, making it effectively hydrophobic, and the decomposed solvent promotes leaching of the iron into the bulk fluid. This study links the wetting behavior to the observed corrosion of the steels via decomposition of solvent at steel interfaces. The overall affect is strongly dependent on the chemical composition of the solvent, in that amines are stable, whereas imines and alcohols are not. We also observed that plastic packing shows little to no solvent degradation, but an equal degree of wetting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-Based Atomistic Theory for Doping Colloidal-Synthesized Quantum Dots via Cation Exchange

Electronic applications require the ability to dope a material with a controllable amount of impurities. However, current understanding of the doping mechanism in colloidal–synthesized quantum dots (QDs) is still limited. This is in contrast with bulk semiconductors for which first-principles-based theories have been well established. Using prototype CdSe as an example, in this report we propose an atomistic theory for the doping of colloidal-synthesized QDs. The key in our theory is the evaluation of atomic chemical potential inside the solution, whose range can deviate considerably from the bulk value due to the presence of solvent. This theory, coupled to first-principles calculations and ab initio molecular dynamics, is able to explain the difference of doping limit in Mn (or Co)-doped CdSe QDs and their bulk counterparts. It also explains the doping behavior of a number of other 3d transition-metal impurities in CdSe QDs in contrast with the solid case.

36 MATERIALS SCIENCE↗

Mixed-anion electrolytes: from bulk speciation to interfacial dynamics in divalent metal electrodeposition

Mixing anions is emerging as a promising strategy for multivalent electrolyte design, allowing for adjustment of the solvation structure of bulk cations and enhancing the efficiency of electrochemical processes (e.g. metal deposition for batteries and catalysis). Further progress in electrolyte development requires a fundamental understanding of how tailored electrolyte speciation in mixed anion systems can modify the dynamic electrochemical interface during metal cycling. In this study, we present an anode-focused mechanistic study of exemplar Mg electrolytes containing three different secondary anions, correlating electrochemical behavior with bulk speciation and operando interfacial dynamics. Electrospray Ionization-Mass Spectrometry (ESI-MS) results reveal a general trend of forming mixed anion contact ion pairs (CIPs) across various anions, with the extent of ion pairing influenced by the association strength of the secondary anion. Operando multiharmonic electrochemical quartz crystal microbalance with dissipation (EQCM-D) reveals how these bulk species influence interfacial mass uptake, viscoelasticity, and solvent-coupled hydrodynamic behavior during deposition and stripping. The results indicate that Mg-containing ion pairs and solvated complexes shape adsorption, nucleation, and deposit growth, leading to distinct anion-dependent interphases ranging from more permeable, solvent-coupled layers to relatively compact and rigid deposits. This work establishes a quantitative link between bulk speciation and interfacial dynamics in divalent metal electrodeposition and provides mechanistic guidance for electrolyte design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flowsheet Design for the Purification of Mo-99 and Uranium Target Recovery by Solvent Extraction

New production and purification methods are sought to meet the increasing demand of 99 Mo but without the use of highly enriched uranium (HEU). To this end, larger quantities of low-enriched uranium (LEU) or even natural uranium (NU) are being leveraged to maintain high production capacities of 99 Mo. Solvent extraction is widely used to treat bulk quantities of uranium and to separate out trace quantities of fission products. This report describes the calculation of AMUSE-generated flowsheets to process irradiated uranium targets to recover 99 Mo by solvent extraction. Flowsheets are presented and discussed along with a number of advantages and disadvantages.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low-boiling-point solvent additives can also enable morphological control in polymer solar cells

Processing organic photovoltaic (OPV) blend solutions with high-boiling-point solvent additives has recently been used for morphological control in bulk-heterojunction OPV cells. Here we show that even low-boiling-point solvents can be effective additives. When P3HT:PCBM OPV cells were processed with a low-boiling-point solvent tetrahydrafuran as an additive in parent solvent o-dichlorobenzene, charge extraction increased leading to fill factors as high as 69.5%, without low work-function cathodes, electrode buffer layers or thermal treatment. This was attributed to PCBM demixing from P3HT domains and better vertical phase separation, as indicated by photoluminescence lifetimes, hole mobilities, and shunt leakage currents. Dependence on solvent parameters and applicability beyond P3HT system was also investigated. (C) 2013 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗