Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “breakthrough”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Overview of Boeing supersonic transport efforts, 1971 - 1979

Following cancellation of the United States Supersonic Transport program, the status of the technology was assessed carefully and emphasis was put on finding solutions for what were considered the major technical difficulties. In particular, work on the breakthroughs needed to advance the technology was emphasized. Currently, solutions to all major technical problems are identified. Depending on the subject, either the problem is no longer a concern or the steps needed to bring about a solution are mapped out clearly. Throughout the NASA SCR program, important strides were made in the identification of design advances which would greatly improve supersonic airplane fuel efficiency, noise, and other performance and cost affecting parameters. Furthermore, these efforts created an atmosphere in which it was possible for new ideas to flourish and positive inventions to take place such as the variable cycle engine and the blended fuselage. These technical gains show that, given availability of such technology, advanced supersonic transports could be developed that would be economically successful and environmentally acceptable.

Sigalla, A.↗

Numerical prediction of vortex cores of the leading and trailing edges of delta wings

The purpose of the present paper is to predict the roll-up of the vortex sheets emanating from the leading- and trailing-edges of delta wings with emphasis on the interaction of vortex cores beyond the trailing edge. The motivation behind the present work is the recent experimental data published by Hummel. The Nonlinear Discrete-Vortex method (NDV-method) is modified and extended to predict the leading- and trailing-vortex cores beyond the trailing edge. The present model alleviates the problems previously encountered in predicting satisfactory pressure distributions. This is accomplished by lumping the free-vortex lines during the iteration procedure. The leading- and trailing-edge cores and their feeding sheets are obtained as parts of the solution. The numerical results show that the NDV-method is successful in confirming the formation of a trailing-edge core with opposite circulation and opposite roll-up to those of the leading-edge core. This work is a breakthrough in the high angle of attack aerodynamics and moreover, it is the first numerical prediction done on this problem

Kandil, O. A.↗

Rotation and precession of cometary nuclei

The given review is concerned with a recent breakthrough in the investigation of polar-axis orientations and spin rates, and with the implications for the surface structure of cometary nuclei. The rotation data for twelve comets are summarized in a table. The progress achieved in the past few years has demonstrated that seemingly complex relations among observed physical and dynamical properties of comets can consistently be interpreted in terms of Whipple's (1950, 1951) model of a rotating icy-conglomerate nucleus. The nucleus, probably a few kilometers in diameter for an average comet, is believed to lose mass more or less continuously. Attention is given to the outgassing asymmetry, a formulation of the geometry of the directed ejection, and the role of rotation in cometary outbursts and splitting.

Sekanina, Z.↗

Models for galactic X-ray sources

Attention is given to those compact galactic X-ray sources whose X-ray luminosities are considerably in excess of the solar luminosity. It is pointed out that the key breakthrough in the development of an understanding of compact galactic X-ray sources was the discovery of X-ray pulsars with the UHURU satellite. There is now overwhelming evidence that these objects are neutron stars in close binary stellar systems. The X-ray pulsations are thought to be thermal emission from the magnetic polar caps of a neutron star that is accreting matter from a companion star and whose magnetic field is misaligned with its rotation axis. Among the compact galactic X-ray sources that are not X-ray pulsars, some still show direct evidence of binary membership, such as X-ray eclipses. There is evidence that the galactic-bulge sources are, in fact, close binary stellar systems. It is concluded, that the great majority of bright galactic X-ray sources, with only a tiny handful of exceptions (such as the Crab and Vela pulsars), are likely to be binaries.

Joss, P. C.↗

Endurance test and evaluation of alkaline water electrolysis cells

Utilization in the development of multi-kW low orbit power systems is discussed. The following technological developments of alkaline water electrolysis cells for space power application were demonstrated: (1) four 92.9 cm2 single water electrolysis cells, two using LST's advanced anodes and two using LST's super anodes; (2) four single cell endurance test stands for life testing of alkaline water electrolyte cells; (3) the solid performance of the advanced electrode and 355 K; (4) the breakthrough performance of the super electrode; (5) the four single cells for over 5,000 hours each significant cell deterioration or cell failure. It is concluded that the static feed water electrolysis concept is reliable and due to the inherent simplicity of the passive water feed mechanism coupled with the use of alkaline electrolyte has greater potential for regenerative fuel cell system applications than alternative electrolyzers. A rise in cell voltage occur after 2,000-3,000 hours which was attributed to deflection of the polysulfone end plates due to creepage of the thermoplastic. More end plate support was added, and the performance of the cells was restored to the initial performance level.

Burke, K. A.↗

Photovoltaics as a terrestrial energy source. Volume 1: An introduction

Photovoltaic (PV) systems were examined their potential for terrestrial application and future development. Photovoltaic technology, existing and potential photovoltaic applications, and the National Photovoltaics Program are reviewed. The competitive environment for this electrical source, affected by the presence or absence of utility supplied power is evaluated in term of systems prices. The roles of technological breakthroughs, directed research and technology development, learning curves, and commercial demonstrations in the National Program are discussed. The potential for photovoltaics to displace oil consumption is examined, as are the potential benefits of employing PV in either central-station or non-utility owned, small, distributed systems.

Smith, J. L.↗

A shuttle scanning laser altimeter for topographic mapping

The shuttle scanning laser altimeter is an instrument, currently under development at JPL, capable of producing a three-dimensional elevation map of the topography along a wide swath beneath a spaceborne platform. Operating on the same principle as radar (broadcast of a short pulse of radiation and timing the reception of an echo) the very narrow beamwidths and high pulse rates of modern lasers would allow a significant breakthrough in the areal resolution capability of altimeters. Specifically, the copper vapor laser currently available and planned for use would provide 50 meter horizontal and 3 meter vertical resolution over a 10 kilometer continuous swath or, in a snapshot mode, a 50 kilometer square area.

Kobrick, M.↗

Dual nozzle design update

Dual-nozzle engines, such as the dual-throat and dual-expander engines, are being evaluated for advanced earth-to-orbit transportation systems. Potential derivatives of the Space Shuttle and completely new vehicles might benefit from these advanced engines. In this paper, progress in the design of single-fuel and dual-fuel dual-nozzle engines is summarized. Dual-nozzle engines include those burning propellants such as LOX/RP-1/LH2, LOX/LC3H8/LH2, LOX/LCH4/LH2, LOX/LH2/LH2, LOX/LCH4/LCH4, LOX/LC3H8/C3H8 and N2O4/MMH/LH2. Engine data are applicable for thrust levels from 200,000 through 670,000 lbF. The results indicate that several versions of these engines utilize state-of-the-art technology and that even advanced versions of these engines do not require a major breakthrough in technology.

Obrien, C. J.↗

The Cambridge photographic atlas of the planets

The origin of the solar systems is considered along with the formation of the planets, the evolution of the planets, the surfaces of solid planets, and the atmosphere of the planets. A description is provided of the various planets of the solar system. It is pointed out that Mercury was little known until March 1974 when the Mariner 10 spacecraft made the first of its three flybys of that body. In the case of Venus, the Pioneer mission to Venus by NASA in 1978 provided a breakthrough concerning a knowledge of the solid body hidden beneath the clouds. The characteristics of the planet earth are discussed together with information about the moon. A shaded relief map of Mars illustrates the geographic features of this planet. The map was produced with the aid of Mariner 9 photographs. Maps of the Jovian system based on photographs provided by space missions are also presented, and the Saturnian system is discussed, taking into account major satellites and rings of Saturn.

Briggs, G.↗

Computational fluid dynamics of airfoils and wings

It is pointed out that transonic flow is one of the fields where computational fluid dynamics turns out to be most effective. Codes for the design and analysis of supercritical airfoils and wings have become standard tools of the aircraft industry. The present investigation is concerned with mathematical models and theorems which account for some of the progress that has been made. The most successful aerodynamics codes are those for the analysis of flow at off-design conditions where weak shock waves appear. A major breakthrough was achieved by Murman and Cole (1971), who conceived of a retarded difference scheme which incorporates artificial viscosity to capture shocks in the supersonic zone. This concept has been used to develop codes for the analysis of transonic flow past a swept wing. Attention is given to the trailing edge and the boundary layer, entropy inequalities and wave drag, shockless airfoils, and the inverse swept wing code.

Garabedian, P.↗

Advanced components for spaceborne infrared astronomy

The need for improved cryogenic components to be used in future spaceborne infrared astronomy missions was identified. Improved low noise cryogenic amplifiers operated with infrared detectors, and better cryogenic actuators and motors with extremely low power dissipation are needed. The feasibility of achieving technological breakthroughs in both of these areas was studied. An improved silicon junction field effect transistor (JFET) could be developed if: (1) high purity silicon; (2) optimum dopants; and (3) very high doping levels are used. The feasibility of a simple stepper motor equipped with superconducting coils is demonstrated by construction of such a device based on a standard commercial motor. It is found that useful levels of torque at immeasurably low power levels were achieved. It is concluded that with modest development and optimization efforts, significant performance gains is possible for both cryogenic preamplifiers and superconducting motors and actuators.

Davidson, A. W.↗

Effects of water-vapor on friction and deformation of polymeric magnetic media in contact with a ceramic oxide

The effects of humidity (water-vapor) in nitrogen on the friction and deformation behavior of magnetic tape in contact with a Ni-Zn ferrite spherical pin were studied. The coefficient of friction is markedly dependent on the ambient relative humidity. In elastic contacts the coefficient of friction increased linearly with increasing humidity; it decreased linearly when humidity was lowered. This effect is the result of changes in the chemistry and interaction of tape materials such as degradation of the lubricant. In plastic contacts there was no effect of humidity on friction below 40 percent relative humidity. There is no effect on friction associated with the breakthrough of the adsorbed water-vapor film at the interface of the tape and Ni-Zn ferrite. The coefficient of friction, however, increased rapidly with increasing relative humidity above 40 percent in plastic contacts.

Miyoshi, K.↗

The future of high efficiency solar cells

Research approaches to obtain solar cell modules with 1 sun efficiencies of 20-30 percent at air mass 1 are now well understood. Such high efficiency modules should become available in the near future. It can be expected that these modules will be extensively used in terrestrial power generation, space power generation, and consumer electronics. To achieve practical module efficiencies significantly above 30 percent, it will be necessary to employ concepts other than spectral splitting, such as spectral compression and broad band detection. A major breakthrough in these areas is not anticipated at this time.

Fan, J. C. C.↗

Progress in optical parametric oscillators

It is pointed out that tunable coherent sources are very useful for many applications, including spectroscopy, chemistry, combustion diagnostics, and remote sensing. Compared with other tunable sources, optical parametric oscillators (OPO) offer the potential advantage of a wide wavelength operating range, which extends from 0.2 micron to 25 microns. The current status of OPO is examined, taking into account mainly advances made during the last decade. Attention is given to early LiNbO3 parametric oscillators, problems which have prevented wide use of parametric oscillators, the demonstration of OPO's using urea and AgGaS2, progress related to picosecond OPO's, a breakthrough in nanosecond parametric oscillators, the first demonstration of a waveguide and fiber parametric amplification and generation, the importance of chalcopyrite crystals, and theoretical work performed with the aim to understand the factors affecting the parametric oscillator performance.

Fan, Y. X.↗

An electrochemical study of hydrogen uptake and elimination by bare and gold-plated waspaloy

Two electrochemical methods for the determination of hydrogen concentrations in metals are discussed and evaluated. The take-up of hydrogen at a pressure of 5000 psi by Waspaloy metal was determined experimentally at 24 C. It was found that the metal becomes saturated with hydrogen after an exposure time of about 1 hr. For samples charged with hydrogen at high pressure, most of the hydrogen is contained in the interstitial solid solution of the metal. For electrolytically charged samples, most of the hydrogen is contained as surface and subsurface hydrides. Hydrogen elimination rates were determined for these two cases, with the rate for electrolytically charged samples being greater by over a factor of two. Theoretical effects of high temperature and pressure on hydrogen take-up and elimination by bare and gold plated Waspaloy metal was considered. The breakthrough point for hydrogen at 5000 psi, determined experimentally, lies between a gold thickness of 0.0127 mm (0.0005 in.) and 0.0254 mm (0.001 in.) at 24 C. Electropolishing was found to greatly reduce the uptake of hydrogen at high pressure by Waspaloy metal at 24 C. Possible implications of the results obtained, as they apply to the turbine disk of the space shuttle main engine, are discussed.

Danford, M. D.↗

Nonradial Pulsation and Mass Loss in Early B Stars

It has been firmly established that nonradial pulsation (NRP) probably occurs in nearly all sharp-lined early B stars near the main sequence. A recent breakthrough occurred with the discovery of quasi emission/absorption bumps moving across the line profiles of the rapid rotators zeta Oph and alpha Vir. It was found that an intermediate-1 (1=8) NRP mode is responsible for these features in zeta Oph. Some 20 Be and Bn stars were monitored and convincing evidence for NRP in 13 of them was found. Line profile variations suggestive of NRP in the other 7 were also discovered. A search for line profile variables among moderate rotators has turned up NRP in epsilon and eta Lep, with v sin i's of 140 and 70 km/sec, respectively. It now seems that NRP can be present at all rotational velocities with equal frequency (near 100%! . However, at most 20% of these stars exhibit detectable photometric variations.

Penrod, G. D.↗

Theoretical Thermodynamics of Mixtures at High Pressures

The development of an understanding of the chemistry of mixtures of metallic hydrogen and abundant, higher-z material such as oxygen, carbon, etc., is important for understanding of fundamental processes of energy release, differentiation, and development of atmospheric abundances in the Jovian planets. It provides a significant theoretical base for the interpretation of atmospheric elemental abundances to be provided by atmospheric entry probes in coming years. Significant differences are found when non-perturbative approaches such as Thomas-Fermi-Dirac (TFD) theory are used. Mapping of the phase diagrams of such binary mixtures in the pressure range from approx. 10 Mbar to approx. 1000 Mbar, using results from three-dimensional TFD calculations is undertaken. Derivation of a general and flexible thermodynamic model for such binary mixtures in the relevant pressure range was facilitated by the following breakthrough: there exists an accurate nd fairly simple thermodynamic representation of a liquid two-component plasma (TCP) in which the Helmholtz free energy is represented as a suitable linear combination of terms dependent only on density and terms which depend only on the ion coupling parameter. It is found that the crystal energies of mixtures of H-He, H-C, and H-O can be satisfactorily reproduced by the same type of model, except that an effective, density-dependent ionic charge must be used in place of the actual total ionic charge.

Hubbard, W. B.↗

An advanced solid state pressure transducer for high reliability SSME application

New methods to advance the state-of-the-art of pressure sensors for the Space Shuttle Main Engine were demonstrated. The results of the feasibility and breadboard demonstration phase and the current status of the research development prototype follow-on phase are presented. A technology breakthrough utilizing silicon piezoresistive technology was achieved in the first phase. A transducer design concept for the SSME application utilizes packaging materials with similar thermal coefficients of expansion and maintains the transducer seals primarily in compression. The silicon chip design will provide dual sensing outputs with laser trimmable integrated compensating electronics. The silicon resistor ion implant dose was customized for the SSME temperature requirement. A basic acoustic modeling software program was developed to evaluate the frequency response characteristics for the package design.

Johnson, R. L.↗