Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boulder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

CAN PLANETESIMALS FORM BY COLLISIONAL FUSION?

As a test bed for the growth of protoplanetary bodies in a turbulent circumstellar disk, we examine the fate of a boulder using direct numerical simulations of particle seeded gas flowing around it. We provide an accurate description of the flow by imposing no-slip and non-penetrating boundary conditions on the boulder surface using the immersed boundary method pioneered by Peskin. Advected by the turbulent disk flow, the dust grains collide with the boulder and we compute the probability density function of the normal component of the collisional velocity. Through this examination of the statistics of collisional velocities, we test the recently developed concept of collisional fusion which provides a physical basis for a range of collisional velocities exhibiting perfect sticking. A boulder can then grow sufficiently rapidly to settle into a Keplerian orbit on disk evolution timescales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

Size and time-resolved growth rate measurements of 1 to 5 nm freshly formed atmospheric nuclei

This study presents measurements of size and time-resolved particle diameter growth rates for freshly nucleated particles down to 1 nm geometric diameter. Novel data analysis methods were developed, de-coupling for the first time the size and time-dependence of particle growth rates by fitting the aerosol general dynamic equation to size distributions obtained at an instant in time. Size distributions of freshly nucleated total aerosol (neutral and charged) were measured during two intensive measurement campaigns in different environments (Atlanta, GA and Boulder, CO) using a recently developed electrical mobility spectrometer with a diethylene glycol-based ultrafine condensation particle counter as the particle detector. One new particle formation (NPF) event from each campaign was analyzed in detail. At a given instant in time during the NPF event, size-resolved growth rates were obtained directly from measured size distributions and were found to increase approximately linearly with particle size from {approx}1 to 3 nm geometric diameter, increasing from 5.5 {+-} 0.8 to 7.6 {+-} 0.6 nm h{sup -1} in Atlanta (13:00) and from 5.6 {+-} 2 to 27 {+-} 5 nm h{sup -1} in Boulder (13:00). The resulting growth rate enhancement {Lambda}, defined as the ratio of the observed growth rate to the growth rate due to the condensation of sulfuric acid only, was found to increase approximately linearly with size from {approx}1 to 3 nm geometric diameter. For the presented NPF events, values for {Lambda} had lower limits that approached {approx}1 at 1.2 nm geometric diameter in Atlanta and {approx}3 at 0.8 nm geometric diameter in Boulder, and had upper limits that reached 8.3 at 4.1 nm geometric diameter in Atlanta and 25 at 2.7 nm geometric diameter in Boulder. Nucleated particle survival probability calculations comparing the effects of constant and size-dependent growth indicate that neglecting the strong dependence of growth rate on size from 1 to 3 nm observed in this study could lead to a significant overestimation of CCN survival probability.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

Lunar granites with unique ternary feldspars

An unusually high concentration of granitic fragments, with textures ranging from holocrystalline to glassy, occurs throughout Boulder 1, a complex breccia of highland rocks from Apollo 17, Station 2. Among the minerals included in the granites are enigmatic K-Ca-rich feldspars that fall in the forbidden region of the ternary diagram. The great variability in chemistry and texture is probably the result of impact degradation and melting of a granitic source-rock. Studies of the breccia matrix suggest that this original granitic source-rock may have contained more pyroxenes and phosphates than most of the present clasts contain. Petrographic observations on Apollo 15 KREEP basalts indicate that granitic liquids may be produced by differentiation without immiscibility, and the association of the granites with KREEP-rich fragments in the boulder suggests that the granites represent a residual liquid from the plutonic fractional crystallization of a KREEP-rich magma. Boulder 1 is unique among Apollo 17 samples in its silica-KREEP-rich composition. We conclude that the boulder represents a source-rock unlike the bedrock of South Massif.

Ryder, G.↗
NASA NTRS1994

Ozone loss in the lower stratosphere over the United States in 1992-1993: Evidence for heterogeneous chemistry on the Pinatubo aerosol

Ozone profiles obtained at Boulder, Colorado and Wallops Island, Virginia indicate that ozone was about 25% below normal during the winter and spring of 1992-93 in the 12-22 km region. This large ozone reduction in the lower stratosphere, though sometimes partially compensated by higher than normal ozone above 24 km, was responsible for the low total column ozone values observed across the United States during this period. Normal temperatures throughout the low ozone region suggest that transport-related effects are probably not the most important cause of the ozone deficits. This region of low ozone at Boulder corresponds closely with the location of the enhanced H2SO4/H2O aerosol from the Pinatubo eruption of 1991 as measured near Boulder and at Laramie, Wyoming. Trajectory analyses suggest that except at low altitudes in spring, air parcels on the days of the ozone measurements generally arrived at Boulder from higher latitude, although seldom higher than 60 deg N, and hence may have been subjected to heterogeneous chemical processing on the surface of Pinatubo aerosol droplets resulting in chlorine-catalyzed ozone destruction, a process which is believed to be more effective under the lower winter temperatures and sunlight levels of higher latitudes.

Hofmann, D. J.↗
NASA NTRS2011

Preliminary Examination of Particles Recovered from the Surface of the Asteroid Itokawa by the Hayabusa Mission

The Hayabusa spacecraft arrived at S-type Asteroid 25143 Itokawa in November 2006, and reveal astounding features of the small asteroid (535 x 294 x 209 m). Near-infrared spectral shape indicates that the surface of this body has an olivinerich mineral assemblage potentially similar to that of LL5 or LL6 chondrites with different degrees of space weathering. Based on the surface morphological features observed in high-resolution images of Itokawa s surface, two major types of boulders were distinguished: rounded and angular boulders. Rounded boulders seem to be breccias, while angular boulders seem to have severe impact origin. Although the sample collection did not be made by normal operations, it was considered that some amount of samples, probably small particles of regolith, was collected from MUSES-C regio on the Itokawa s surface. The sample capsule was successfully recovered on the earth on June 13, 2010, and was opened at curation facility of JAXA (Japan Aerospace Exploration Agency), Sagamihara, Japan. A large number of small particles were found in the sample container. Preliminary analysis with SEM/EDX at the curation facility showed that at least more than 1500 grains were identified as rocky particles, and most of them were judged to be of extraterrestrial origin, and definitely from Asteroid Itokawa. Minerals (olivine, low-Ca pyroxene, high-Ca pyroxene, plagioclase, Fe sulfide, Fe-Ni metal, chromite, Ca phosphate), roughly estimated mode the minerals and rough measurement of the chemical compositions of the silicates show that these particles are roughly similar to LL chondrites. Although their size are mostly less than 10 m, some larger particles of about 100 m or larger were also identified. A part of the sample (probably several tens particles) will be selected by Hayabusa sample curation team and examined preliminary in Japan within one year after the sample recovery in prior to detailed analysis phase. Hayabusa Asteroidal Sample Preliminary Examination Team (HASPET) has been preparing for the preliminary examination with close cooperation with the curation team.

Tsuchiyama, A.↗
NASA NTRS2014

Controlled Ascent From the Surface of an Asteroid

The National Aeronautics and Space Administration (NASA) is currently investigating a conceptual robotic mission to collect a small boulder up to 4 m in diameter resting on the surface of a large Near Earth Asteroid (NEA). Because most NEAs are not well characterized, a great range of uncertainties in boulder mass properties and NEA surface characteristics must be considered in the design of this mission. These uncertainties are especially significant when the spacecraft ascends with the boulder in tow. The most important requirement during ascent is to keep the spacecraft in an upright posture to maintain healthy ground clearances for the two large solar arrays. This paper focuses on the initial stage (the first 50 m) of ascent from the surface. Specifically, it presents a sensitivity study of the solar array ground clearance, control authority, and accelerations at the array tips in the presence of a variety of uncertainties including various boulder sizes, densities, shapes and orientations, locations of the true center of mass, and push-off force distributions. Results are presented, and appropriate operations are recommended in the event some of the off-nominal cases occur.

Shen, Haijun↗
NASA NTRS2019

Properties of Rubble-Pile Asteroid (101955) Bennu from OSIRIS-REx Imaging and Thermal Analysis

Establishing the abundance and physical properties of regolith and boulders on asteroids is crucial for understanding the formation and degradation mechanisms at work on their surfaces. Using images and thermal data from NASA's Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft, we show that asteroid (101955) Bennu's surface is globally rough, dense with boulders, and low in albedo. The number of boulders is surprising given Bennu's moderate thermal inertia, suggesting that simple models linking thermal inertia to particle size do not adequately capture the complexity relating these properties. At the same time, we find evidence for a wide range of particle sizes with distinct albedo characteristics. Our findings imply that ages of Bennu's surface particles span from the disruption of the asteroid's parent body (boulders) to recent in situ production (micrometre-scale particles).

DellaGiustina, D. N.↗
NASA NTRS2020

Hemispherical differences in the shape and topography of asteroid (101955) Bennu

We investigate the shape of near-Earth asteroid (101955) Bennu by constructing a high-resolution (20 cm) global digital terrain model from laser altimeter data. By modeling the northern and southern hemispheres separately, we find that longitudinal ridges previously identified in the north extend into the south but are obscured there by surface material. In the south, more numerous large boulders effectively retain surface materials and imply a higher average strength at depth to support them. The north has fewer large boulders and more evidence of boulder dynamics (toppling and downslope movement) and surface flow. These factors result in Bennu's southern hemisphere being rounder and smoother, whereas its northern hemisphere has higher slopes and a less regular shape. We infer an originally asymmetric distribution of large boulders followed by a partial disruption, leading to wedge formation in Bennu's history.

M. G. Daly↗
DOE OSTI2021

Chronostratigraphy of talus flatirons and piedmont alluvium along the Book Cliffs, Utah – Testing models of dryland escarpment evolution

Research on the evolution of dryland escarpments and what drives and controls their erosional retreat have been limited by a lack of chronologically constrained records. Prior investigations of escarpments in the southwestern U.S. and globally garner two endmember conceptual models -- one focused on bottom-up baselevel drivers and autogenic variations in piedmont and toeslope erosion processes, the other focused on the role of climate as a top-down forcing mechanism on sediment production and transport from cliffs. In this work, we test these conceptual models along a section of the Book Cliffs in central Utah, where climate has varied strongly and baselevel has fallen significantly over the late Quaternary. Four generations of talus flatirons and piedmont terraces are preserved in the study area we date them by optically stimulated luminescence and 10Be-exposure techniques. OSL depositional ages cluster into four generations of deposits with mean ages and mean standard errors of 117.8 ± 6.7 ka, 83.4 ± 3.3 ka, 52.4 ± 1.8 ka, and 5.6 ± 0.3 ka. 10Be-exposure results from talus boulders protruding from flatirons confirm that the youngest generation of talus is Holocene, with recent rock-fall boulders still being received on the landform top. Older flatiron generations produce incoherent, minimum exposure ages reflecting an increasing dominance of in situ boulder weathering and a steady-state denudation rate of ~45 mm/ky after tens of thousands of years. Based on the chronostratgraphy and correlation of talus and piedmont deposits, we interpret climate as the primary control on escarpment evolution. Depositional ages do not correspond to glacial epochs as historically presumed, but instead to episodes of intermediate and unstable or variable Pleistocene climate during Marine Isotope Stage-3 and 5 a/b. Results support the significance of high climate variability at millennial timescales in driving both sediment production by mass wasting from the cliff as well as sediment storage and reworking along the piedmont. In contrast, wetter climates of glacial epochs apparently caused greater erosion and sediment transport to trunk drainages. Our chronology also reveals a systematic decrease in deposit age with increasing distance up the piedmont from the regional baselevel of the Price River, consistent with transient fluvial incision and terrace abandonment. The Book Cliffs record notably does not correlate with similarly constrained records in Spain or the contrasting record from the Negev, yet they all share the feature of enhanced talus deposition and cliff retreat corresponding to climate instability rather than in response to steady glacial-climate conditions. Thus, we outline a model of escarpment evolution and retreat governed largely by top-down climate-forcing of sediment production and transport during climate variability, with local changes in baselevel and erosional processes on the piedmont being a modifying, secondary factor.

58 GEOSCIENCES↗
DOE OSTI2013

METER-SIZED MOONLET POPULATION IN SATURN'S C RING AND CASSINI DIVISION

Stellar occultations observed by the Cassini Ultraviolet Imaging Spectrograph reveal the presence of transparent holes a few meters to a few tens of meters in radial extent in otherwise optically thick regions of the C ring and the Cassini Division. We attribute the holes to gravitational disturbances generated by a population of {approx}10 m boulders in the rings that is intermediate in size between the background ring particle size distribution and the previously observed {approx}100 m propeller moonlets in the A ring. The size distribution of these boulders is described by a shallower power-law than the one that describes the ring particle size distribution. The number and size distribution of these boulders could be explained by limited accretion processes deep within Saturn's Roche zone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

Colorado Better Buildings Project. Final Report

The Colorado Better Buildings project intended to bring new and existing energy efficiency model programs to market with regional collaboration and funding partnerships. The goals for Boulder County and its program partners were to advance energy efficiency investments, stimulate economic growth in Colorado and advance the state’s energy independence. Collectively, three counties set out to complete 9,025 energy efficiency upgrades in 2.5 years and they succeeded in doing so. Energy efficiency upgrades have been completed in more than 11,000 homes and businesses in these communities. Boulder County and its partners received a $25 million BetterBuildings grant from the U.S. Department of Energy under the American Recovery and Reinvestment Act in the summer of 2010. This was also known as the Energy Efficiency and Conservation Block Grants program. With this funding, Boulder County, the City and County of Denver, and Garfield County set out to design programs for the residential and commercial sectors to overcome key barriers in the energy upgrade process. Since January 2011, these communities have paired homeowners and business owners with an Energy Advisor – an expert to help move from assessment to upgrade with minimal hassle. Pairing this step-by-step assistance with financing incentives has effectively addressed many key barriers, resulting in energy efficiency improvements and happy customers. An expert energy advisor guides the building owner through every step of the process, coordinating the energy assessment, interpreting results for a customized action plan, providing a list of contractors, and finding and applying for all available rebates and low-interest loans. In addition to the expert advising and financial incentives, the programs also included elements of social marketing, technical assistance, workforce development and contractor trainings, project monitoring and verification, and a cloud-based customer data system to coordinate among field advisors and across local governments and local service vendors. A portion of the BetterBuildings grant went to the Metro Mayors Caucus (MMC) who worked in partnership with the Denver Regional Council of Governments (DRCOG) to conduct a series of 10 energy efficiency workshops for local government officials and other interested parties. The workshops helped showcase lessons learned on energy efficiency and helped guide other local governments in the establishment of similar programs. The workshops covered a wide range of energy efficiency and renewable energy topics such as clean energy finance, social mobilization and communications, specific case studies of Colorado towns, energy efficiency codes, net zero buildings and solar power. Since the programs launched in January 2011, these communities have collectively spurred economic investments in energy efficiency, achieved greater than 5:1 leveraging of grant funds, saved energy and reduced greenhouse gas emissions, provided trainings for a robust local energy contractor network, and proved out viable and replicable program models that local utilities and other communities are adopting, with long lasting market transformation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Evidence of Recent Material Transport within a Binary Asteroid System

Images acquired by the Double Asteroid Redirection Test (DART) before its impact into Dimorphos—the moon of the Didymos binary asteroid system—unexpectedly reveal a set of discontinuous rays spanning the imaged surface. These albedo features are visible only after correcting for lighting differences, which normalize the effects of the pervasive boulders that cover the surface. Comparison to physical experiments and numerical simulations shows that these bright, fan-shaped albedo features are consistent with the aftermath of a low-velocity impact into a field of boulders and provide our first direct evidence for the transfer of material in a binary asteroid system due to the shedding material from radiative torques. Parts of these and possible additional albedo markings from the reentry of boulders after the DART impact may be visible to the Hera mission when it explores the post-DART Didymos system.

Astronomy and AstroPhysics↗
NASA NTRS1971

Lunar surface engineering properties experiment definition. Volume 2: Mechanics of rolling sphere-soil slope interaction

The soil deformation mode under the action of a rolling sphere (boulder) was determined, and a theory based on actual soil failure mechanism was developed which provides a remote reconnaissance technique for study of soil conditions using boulder track observations. The failure mechanism was investigated by using models and by testing an instrumented spherical wheel. The wheel was specifically designed to measure contact pressure, but it also provided information on the failure mechanism. Further tests included rolling some 200 spheres down sand slopes. Films were taken of the rolling spheres, and the tracks were measured. Implications of the results and reevaluation of the lunar boulder tracks are discussed.

Hovland, H. J.↗
NASA NTRS1974

Morphology and surface mapping

Of the many boulders photographed at the Apollo 17 site, boulder 1 from Station 2 is unique in having a strongly developed foliation. Resistant layers form four steeply inclined ridges separated by joint planes or by deeply eroded beds of softer materials. A prominent cleavage, or set of cross joints, is oriented almost normal to the foliation. The cleavage is expressed as subparallel cracks, some of which are open fissures. The entire surface of the boulder is rough and studded by dark colored knobs ranging in diameter from 1 to 15 cm. It is a polymict breccia containing at least one type of rock that has not been recognized in any other lunar sample, and it records an unusual minor element distribution and magnetic history.

Marvin, U. B.↗
NASA NTRS1974

Petrology

Boulder 1 as a whole can be considered a complex polymict breccia consisting of lithic and breccia clasts seated in a matrix that ranges from friable and poorly sintered to densely welded. Only two of the four samples collected from boulder 1, Station 2 have been examined in detail: 72255 and 72275. Of the remaining two, only two undocumented thin sections from 72235 have been studied, while none from 72215 has been examined. Sample 72275 was collected as representative of the boulder matrix, whereas the other three samples were thought to be large clasts.

Stoeser, D. B.↗
NASA NTRS1975

Cosmic ray exposure ages of features and events at the Apollo landing sites

Cosmic-ray exposure ages of lunar samples have been used to date surface features related to impact cratering and downslope movement of material. Only when multiple samples related to a feature have the same rare-gas exposure age or when a single sample has the same Kr-81 -Kr and track-exposure age can a feature be considered as reliably dated. Based on these criteria, there are only five well-dated lunar features: Cone Crater (Apollo 14), 26 m.y,; North Ray Crater (Apollo 16), 50 m.y.; South Ray Crater (Apollo 16), 2 m.y.; the emplacement of the Station 6 boulders (Apollo 17), 22 m.y.; and the emplacement of the Station 7 boulder (Apollo 17), 28 m.y. Other features are tentatively dated or have limits set on their ages: Bench Crater (Apollo 12), upper limit of 99 m.y.; Baby Ray Crater (Apollo 16), upper limit of 2 m.y.; Shorty Crater (Apollo 17), approximately 30 m.y.; Camelot Crater (Apollo 17) upper limit of 140 m.y.; the emplacement of the Station 2 boulder 1 (Apollo 17), 45 to 55 m.y.; and the slide which generated the light mantle (Apollo 17), lower limit of 50 m.y.

Arvidson, R.↗
NASA NTRS1977

The Apollo 17 'melt sheet' - Chemistry, age and Rb/Sr systematics

Major, minor, and trace-element compositions, age data, and Rb/Sr systematics of Apollo 17 boulders have been compiled, and additional analyses performed on a norite breccia clast (77215) included in the Apollo 17, Station 7 boulder. The Apollo 17 boulders are found to be identical or nearly so in major, minor, and trace-element composition, suggesting that they all originated as an impact melt analogous to melt sheets found in larger terrestrial craters. The matrix dates (Ar-40/Ar-39) and Rb/Sr systematics available suggest that this impact melt formed by a single impact about 4 billion years ago. This impact excavated, shocked, brecciated, and melted norites, norite cumulates, and possibly anorthositic gabbros and dunites about 4.4 billion years old. The impact was likely a major one, possibly the Serenitatis basin-forming event.

Winzer, S. R.↗
NASA NTRS1975

/Ar-40/-/Ar-39/ dating of Apollo 16 and 17 rocks

The reported study is a continuation of an investigation begun by Alexander and Kahl (1974), with primary emphasis on (Ar-40)-(Ar-39) dating of lunar breccias. A primary objective of the study was related to the resolution of small plateau-age differences between Apollo 16 and 17 samples which have been irradiated in the same irradiation. This objective was not realized because (1) neither of the considered Apollo 16 samples has a well-defined plateau, and (2) the release patterns of the two Apollo 17 samples with plateaux (73235 and 77017) are sufficiently complex to suggest caution in interpretation of fine-scale differences among apparent ages. The plateau age of 73235 agrees well with plateau ages measured for a nearby boulder at the South Massif. The plateau age of 77017, on the other hand, agrees well with plateau ages measured in an nearby boulder at the base of the North Massif. These rock and boulder ages are tightly clustered about 3.99 b.y., and this clustering suggests that the North and South Massifs were made in the same basin-forming event, presumably Serenitatis.

Phinney, D.↗