Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bottoming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

High-mobility, air stable bottom-contact n-channel thin film transistors based on N,N′-ditridecyl perylene diimide

Bottom-gate bottom-contact (BGBC) organic thin film transistors (OTFTs) based on N,N′-ditridecyl perylene diimide exhibit electron mobility as high as 3.54 cm{sup 2} V{sup −1} s{sup −1} in nitrogen, higher than that (1 cm{sup 2} V{sup −1} s{sup −1}) of bottom-gate top-contact devices. The better performance of BGBC configuration in N{sub 2} is attributed to lower contact resistance, which is further reduced by thermal annealing. After thermally annealing the BGBC OTFTs at 180 °C, electron mobility as high as 3.5 cm{sup 2} V{sup −1} s{sup −1}, current on/off ratio of 10{sup 6} and threshold voltage of 9 V are achieved in air, and the mobility retains above 1 cm{sup 2} V{sup −1} s{sup −1} after storage for two months in air. Thermal treatment enhanced crystalline grains, reduced grain boundaries, and suppressed the adsorption of H{sub 2}O and O{sub 2}, leading to excellent performance in air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Piezoresistive characterization of bottom-up, n-type silicon microwires undergoing bend deformation

The piezoresistance of silicon has been studied over the past few decades in order to characterize the material's unique electromechanical properties and investigate their wider applicability. While bulk and top-down (etched) micro- and nano-wires have been studied extensively, less work exists regarding bottom-up grown microwires. A facile method is presented for characterizing the piezoresistance of released, phosphorus-doped silicon microwires that have been grown, bottom-up, via a chemical vapour deposition, vapour-liquid-solid process. The method uses conductive tungsten probes to simultaneously make electrical measurements via direct ohmic contact and apply mechanical strain via bend deformation. These microwires display piezoresistive coefficients within an order of magnitude of those expected for bulk n-type silicon; however, they show an anomalous response at degenerate doping concentrations (∼10{sup 20 }cm{sup −3}) when compared to lower doping concentrations (∼10{sup 17 }cm{sup −3}), with a stronger piezoresistive coefficient exhibited for the more highly doped wires. This response is postulated to be due to the different growth mechanism of bottom-up microwires as compared to top-down.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bottom-up coarse-grained models that accurately describe the structure, pressure, and compressibility of molecular liquids

The present work investigates the capability of bottom-up coarse-graining (CG) methods for accurately modeling both structural and thermodynamic properties of all-atom (AA) models for molecular liquids. In particular, we consider 1, 2, and 3-site CG models for heptane, as well as 1 and 3-site CG models for toluene. For each model, we employ the multiscale coarse-graining method to determine interaction potentials that optimally approximate the configuration dependence of the many-body potential of mean force (PMF). We employ a previously developed “pressure-matching” variational principle to determine a volume-dependent contribution to the potential, U{sub V}(V), that approximates the volume-dependence of the PMF. We demonstrate that the resulting CG models describe AA density fluctuations with qualitative, but not quantitative, accuracy. Accordingly, we develop a self-consistent approach for further optimizing U{sub V}, such that the CG models accurately reproduce the equilibrium density, compressibility, and average pressure of the AA models, although the CG models still significantly underestimate the atomic pressure fluctuations. Additionally, by comparing this array of models that accurately describe the structure and thermodynamic pressure of heptane and toluene at a range of different resolutions, we investigate the impact of bottom-up coarse-graining upon thermodynamic properties. In particular, we demonstrate that U{sub V} accounts for the reduced cohesion in the CG models. Finally, we observe that bottom-up coarse-graining introduces subtle correlations between the resolution, the cohesive energy density, and the “simplicity” of the model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement and simulation of top- and bottom-illuminated solar-blind AlGaN metal-semiconductor-metal photodetectors with high external quantum efficiencies

A comprehensive study on top- and bottom-illuminated Al{sub 0.5}Ga{sub 0.5}N/AlN metal-semiconductor-metal (MSM) photodetectors having different AlGaN absorber layer thickness is presented. The measured external quantum efficiency (EQE) shows pronounced threshold and saturation behavior as a function of applied bias voltage up to 50 V reaching about 50% for 0.1 μm and 67% for 0.5 μm thick absorber layers under bottom illumination. All experimental findings are in very good accordance with two-dimensional drift-diffusion modeling results. By taking into account macroscopic polarization effects in the hexagonal metal-polar +c-plane AlGaN/AlN heterostructures, new insights into the general device functionality of AlGaN-based MSM photodetectors are obtained. The observed threshold/saturation behavior is caused by a bias-dependent extraction of photoexcited holes from the Al{sub 0.5}Ga{sub 0.5}N/AlN interface. While present under bottom illumination for any AlGaN layer thickness, under top illumination this mechanism influences the EQE-bias characteristics only for thin layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of irradiation distance on supply of reactive oxygen species to the bottom of a Petri dish filled with liquid by an atmospheric O{sub 2}/He plasma jet

The impact of irradiation distances on plasma jet-induced specific effects on the supply of reactive oxygen species (ROS) to the bottom of a Petri dish filled with liquid was investigated using a KI-starch gel reagent that can be employed as a ROS indicator even in water. O{sub 3} exposure experiments without plasma irradiation were also performed to elucidate the specific effects of the plasma jet. Relative concentrations of ROS transported to the bottom were evaluated using absorbance measurements. The results indicated that ROS supply to the bottom is markedly enhanced by the plasma jet irradiation at shorter irradiation distances, whereas similar results could not be obtained for the O{sub 3} exposure. In these cases, the liquid mixing in the depth direction was also enhanced by the plasma jet irradiation only, and the supply of reactive atomic oxygen to the liquid surface was markedly increased as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanosecond laser scribing of CIGS thin film solar cell based on ITO bottom contact

Cu(In,Ga)Se2 (CIGS) thin films, a promising photovoltaic architecture, have mainly relied on Molybdenum for the bottom contact. However, the opaque nature of Molybdenum (Mo) poses limitations in module level fabrication by laser scribing as a preferred method for interconnect. We examined the P1, P2, and P3 laser scribing processes on CIGS photovoltaic architecture on the indium tin oxide (ITO) bottom contact with a cost-effective nanosecond pulsed laser of 532 nm wavelength. Laser illuminated from the substrate side, enabled by the transparent bottom contact, facilitated selective laser energy deposition onto relevant interfaces towards high-quality scribing. Parametric tuning procedures are described in conjunction with experimental and numerical investigation of relevant mechanisms, and preliminary mini-module fabrication results are also presented.

Kuk, Seungkuk↗

MEAN-FIELD SOLAR DYNAMO MODELS WITH A STRONG MERIDIONAL FLOW AT THE BOTTOM OF THE CONVECTION ZONE

This paper presents a study of kinematic axisymmetric mean-field dynamo models for the case of meridional circulation with a deep-seated stagnation point and a strong return flow at the bottom of the convection zone. This kind of circulation follows from mean-field models of the angular momentum balance in the solar convection zone. The dynamo models include turbulent sources of the large-scale poloidal magnetic field production due to kinetic helicity and a combined effect due to the Coriolis force and large-scale electric current. In these models the toroidal magnetic field, which is responsible for sunspot production, is concentrated at the bottom of the convection zone and is transported to low-latitude regions by a meridional flow. The meridional component of the poloidal field is also concentrated at the bottom of the convection zone, while the radial component is concentrated in near-polar regions. We show that it is possible for this type of meridional circulation to construct kinematic dynamo models that resemble in some aspects the sunspot magnetic activity cycle. However, in the near-equatorial regions the phase relation between the toroidal and poloidal components disagrees with observations. We also show that the period of the magnetic cycle may not always monotonically decrease with the increase of the meridional flow speed. Thus, for further progress it is important to determine the structure of the meridional circulation, which is one of the critical properties, from helioseismology observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Natural top-bottom mass hierarchy in composite Higgs models

We consider composite two-Higgs doublet models based on gauge-Yukawa theories with strongly interacting fermions generating the top-bottom mass hierarchy. The model features a single "universal" Higgs-Yukawa coupling, $g$, which is identified with the top quark $g\equiv g_t \sim \mathcal{O}(1)$. The top-bottom mass hierarchy arises by soft breaking of a $\mathbb{Z}_2$ symmetry by a condensate of strongly interacting fermions. A mass splitting between vector-like masses of the confined techni-fermions controls this top-bottom mass hierarchy. This mechanism can be present in a variety of models based on vacuum misalignment. For concreteness, we demonstrate it in a composite two-Higgs scheme.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bottomed analog of Z{sup +}(4433)

The newly observed Z{sup +}(4433) resonance by BELLE is believed to be a tetraquark bound state made up of (cu)(cd). We propose the bottomed analog of this bound state, namely, by replacing one of the charm quarks by a bottom quark, thus forming Z{sub bc}{sup 0,{+-}}{sup ,{+-}}{sup {+-}}. One of the Z{sub bc} is doubly charged. The predicted mass of Z{sub bc} is around 7.6 GeV. This doubly charged bound state can be detected by its decay into B{sub c}{sup {+-}}{pi}{sup {+-}}. Similarly, we can also replace both charm quark and antiquark of the Z{sup +}(4433) by bottom quark and antiquark, respectively, thus forming Z{sub bb} the bottomonium analog of Z{sup +}(4433). The predicted mass of Z{sub bb} is about 10.7 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bottom baryons

Recently the CDF and D0 Collaborations observed several bottom baryons. In this work we perform a systematic study of the masses of bottom baryons up to 1/m{sub Q} in the framework of heavy quark effective field theory using the QCD sum rule approach. The extracted chromo-magnetic splitting between the bottom baryon heavy doublet agrees well with the experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charm and bottom quark masses: An update

Using new four-loop results for the heavy quark vacuum polarization and new data for bottom quark production in electron-positron annihilation, an update on the determination of charm- and bottom-quark masses through sum rules has been performed. The previous result for the charm-quark mass, m{sub c}(3 GeV)=0.986(13) GeV, based on the lowest moment, is supported by the new results from higher moments which lead to consistent values with comparable errors. The new value for the bottom quark, m{sub b}(10 GeV)=3.610(16) GeV, corresponding to m{sub b}(m{sub b})=4.163(16) GeV, makes use of both the new data and the new perturbative results and is consistent with the earlier determination.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for low-mass resonances decaying into bottom quark-antiquark pairs in proton-proton collisions at s = 13 TeV

A search for narrow, low-mass, scalar, and pseudoscalar resonances decaying to bottom quark-antiquark pairs is presented. The search is based on events recorded in $\sqrt{s} =$ 13 TeV proton-proton collisions with the CMS detector at the LHC, collected in 2016, and corresponding to an integrated luminosity of 35.9 fb -1 . The search selects events in which the resonance would be produced with high transverse momentum because of the presence of initial- or final-state radiation. In such events, the decay products of the resonance would be reconstructed as a single large-radius jet with high mass and two-prong substructure. A potential signal would be identified as a narrow excess in the jet invariant mass spectrum. No evidence for such a resonance is observed within the mass range from 50 to 350 GeV, and upper limits at 95% confidence level are set on the product of the cross section and branching fraction to a bottom quark-antiquark pair. Lastly, these constitute the first constraints from the LHC on exotic bottom quark-antiquark resonances with masses below 325 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Gluino-Mediated Bottom Squark Production in pp Collisions at {radical}(s)=1.96 TeV

We report on a search for the supersymmetric partner of the bottom quark produced from gluino decays in data from 2.5 fb{sup -1} of integrated luminosity collected by the Collider Detector at Fermilab at {radical}(s)=1.96 TeV. Candidate events are selected requiring two or more jets and large missing transverse energy. At least two of the jets are required to be tagged as originating from a b quark to enhance the sensitivity. The results are in good agreement with the prediction of the standard model processes, giving no evidence for gluino decay to bottom squarks. This result constrains the gluino-pair-production cross section to be less than 40 fb at 95% credibility level for a gluino mass of 350 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Luminescent Solar Concentrator Tandem-on-Silicon with above 700mV Passivated Contact Silicon Bottom Cell

Luminescent solar concentrator (LSC) tandem-on-silicon (Si) provides a route towards achieving higher than 30% overall efficiency which can overcome the theoretical efficiency limit of a single junction Si cell. Here, we present optical coupling and performance of high Voc passivated contact Si bottom cell for LSC tandem-on-Si where the top module consists of highly efficient luminophores and an array of micro InGaP cells embedded in a poly (lauryl methacrylate) waveguide. In this device configuration, InGaP cell area coverage is only ~0.5% of the total LSC area which significantly reduces the high cost III-V material usage. The performance of Si sub-cell is investigated under LSC spectrum and is compared against the measurement done under 1 um thick InGaP filter which mimics the spectrum seen by Si bottom cell in a conventional III-V/Si tandem. V oc of greater than 700 mV has been observed for the passivated contact Si bottom cell in these tandem applications.

14 SOLAR ENERGY↗

Evidence of Mass Ordering of Charm and Bottom Quark Energy Loss in Au+Au Collisions at RHIC

Abstract Partons traversing the strongly interacting medium produced in heavy-ion collisions are expected to lose energy depending on their color charge and mass. We measure the nuclear modification factors for charm- and bottom-decay electrons, defined as the ratio of yields, divided by the number of binary nucleon–nucleon collisions, in $$\sqrt{s_{\textrm{NN}}}=200$$ s NN = 200 GeV Au+Au collisions to p + p collisions ( $$R_{\textrm{AA}}$$ R AA ), or in central to peripheral Au+Au collisions ( $$R_{\textrm{CP}}$$ R CP ). We find the bottom-decay electron $$R_{\textrm{AA}}$$ R AA and $$R_{\textrm{CP}}$$ R CP to be significantly higher than those of charm-decay electrons. Model calculations including mass-dependent parton energy loss in a strongly coupled medium are consistent with the measured data. These observations provide evidence of mass ordering of charm and bottom quark energy loss when traversing through the strongly coupled medium created in heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Galvanostatic Plating with a Single Additive Electrolyte for Bottom-Up Filling of Copper in Mesoscale TSVs

A methanesulfonic acid (MSA) electrolyte with a single suppressor additive was used for potentiostatic bottom-up filling of copper in mesoscale through silicon vias (TSVs). Conversly, galvanostatic deposition is desirable for production level full wafer plating tools as they are typically not equipped with reference electrodes which are required for potentiostatic plating. Potentiostatic deposition was used to determine the over-potential required for bottom-up TSV filling and the resultant current was measured to establish a range of current densities to investigate for galvanostatic deposition. Galvanostatic plating conditions were then optimized to achieve void-free bottom-up filling in mesoscale TSVs for a range of sample sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Measure-Theoretic Algorithm for Estimating Bottom Friction in a Coastal Inlet: Case Study of Bay St. Louis during Hurricane Gustav (2008)

The majority of structural damage and loss of life during a hurricane is due to storm surge, thus it is important for communities in hurricane-prone regions to understand their risk due to surge. Storm surge in particular is largely influenced by coastal features such as topography/bathymetry and bottom roughness. Bottom roughness determines how much resistance there is to the flow. Manning’s formula can be used to model the bottom stress with the Manning’s n coefficient, a spatially dependent field. Given a storm surge model and a set of model outputs, an inverse problem may be solved to determine probable Manning’s n fields to use for predictive simulations. The inverse problem is formulated and solved in a measure-theoretic framework using the state-of-the-art Advanced Circulation (ADCIRC) storm surge model. The use of measure theory requires minimal assumptions and involves the direct inversion of the physics-based map from model inputs to output data determined by the ADCIRC model. Thus, key geometric relationships in this map are preserved and exploited. By using a recently available subdomain implementation of ADCIRC that significantly reduces the computational cost of forward model solves, the authors demonstrate the method on a case study using data obtained from an ADCIRC hindcast study of Hurricane Gustav (2008) to quantify uncertainties in Manning’s n within Bay St. Louis. However, the methodology is general and could be applied to any inverse problem that involves a map from model input to output quantities of interest.

54 ENVIRONMENTAL SCIENCES↗

Top-down and bottom-up definitions of human failure events in human reliability analysis

In the probabilistic risk assessments (PRAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approaches should arrive at the same set of HFEs. This question is crucial, however, as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PRAs tend to be top-down—defined as a subset of the PRA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) often tend to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications.

02 PETROLEUM↗