Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beam model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Superluminal motion in the double-lobed quasar 3C 245

VLBI observations of 3C 245 obtained at 10.7 GHz with the Mark III array at five epochs in 1981-1986 are reported. The data-reduction and model-fitting procedures are explained, and the results are presented in tables, graphs, and maps along with previously published data on 11 other superluminal sources. The central component of the quasar is found to have an apparent transverse velocity of (3.1 + or - 1.4) c/h, assuming H0 = 100h km/s Mpc and q0 = 0.5. From the apparent source orientation (based on R, variability, apparent curvature, and projected linear size) it is inferred that the apparent transverse velocity is anticorrelated with the angle to the line of sight, as predicted by relativistic-beaming models of superluminal motion.

Hough, D. H.↗
NASA NTRS2026

The Canadian Galactic Emission Mapper: A New 8-10 GHz Telescope To Map the Polarization of the Northern Sky

The Canadian Galactic Emission Mapper (CGEM) radio telescope is mapping polarized Galactic foregrounds from 8-10 GHz to aid in the search for B-modes in the Cosmic Microwave Background (CMB). Here we describe the design and early on-sky characterization of the CGEM optics. CGEM employs an on-axis, hat feed optical design that is a body of revolution (BOR) and exhibits excellent intrinsic polarization purity. We describe how we have optimized the optics with a novel framework that can directly minimize simulated intensity to polarized intensity (T → P) leakage in angular power spectrum space. The optimized optics exhibit simulated T → P leakage that is orders of magnitude below anticipated CℓBB for r = 10 −3 when scaled from 8-10 GHz to the CMB observing window near 95 GHz. We go on to describe the mechanical design of the optics, including a novel secondary mirror support made from Astroquartz composite that has low loss, low dielectric constant, and preserves the BOR symmetry of the optics. We then showcase the early on-sky performance of the optics with observations of the Sun and satellites, which probe the beam to 40dB down from the peak. A beam model for the deployed CGEM optics based on electromagnetic simulations is in excellent agreement with the on-sky data.

cosmic microwave background↗
NASA NTRS2023

The Gamma-Ray Pulsar Phenomenology in View of 3D Kinetic Global Magnetosphere Models

We develop kinetic plasma models of pulsar magnetospheres with magnetic-field-line-dependent plasma injection that reveal the importance of various magnetosphere regions in regulating the gamma-ray emission. We set different particle injection rates for the so-called open, closed, and separatrix zones. Moderate particle injection rates in open and closed zones ensure a global field structure close to the force-free one, while the dissipation occurs mainly in and around the equatorial current sheet. The particles injected in the separatrix zone affect the particle populations that enter the equatorial current sheet region and, therefore, the corresponding accelerating electric fields, particle energies, the spectral cutoff energy, and gamma-ray efficiency. The separatrix zone models reproduce the recently discovered fundamental plane of gamma-ray pulsars consistent with curvature radiation emission, the gamma-ray light-curve shapes, and the radio-lag vs. peak-separation correlation reported in the Fermi second pulsar catalog. The model beaming factors indicate that the pulsar total gamma-ray luminosities listed in the Fermi catalogs are overestimations of the actual ones. We find that the radiation reaction limited regime starts ceasing to govern the high-energy emission for spin-down powers less than 1034 erg/s. Our results also indicate that toward high magnetic inclination angles, the "Y point" around the rotational equator migrates well inside the light cylinder sparking additional peaks in the gamma-ray pulse profiles. We find that an equivalent enhanced particle injection beyond the Y point strengthens these features making the model gamma-ray light curves inconsistent with those observed.

Neutron stars↗
NASA NTRS1985

Temporal and spectral characteristics of solar flare hard X-ray emission

Solar Maximum Mission observations of three flares that impose stringent constraints on physical models of the hard X-ray production during the impulsive phase are presented. Hard X-ray imaging observations of the flares on 1980 November 5 at 22:33 UT show two patches in the 16 to 30 keV images that are separated by 70,000 km and that brighten simultaneously to within 5 s. Observations to O V from one of the footprints show simultaneity of the brightening in this transition zone line and in the total hard X-ray flux to within a second or two. These results suggest but do not require the existence of electron beams in this flare. The rapid fluctuations of the hard X-ray flux within some flares on the time scales of 1 s also provide evidence for electron beams and limits on the time scale of the energy release mechanism. Observations of a flare on 1980 June 6 at 22:34 UT show variations in the 28 keV X-ray counting rate from one 20 ms interval to the next over a period of 10 s. The hard X-ray spectral variations measured with 128 ms time resolution for one 0.5 s spike during this flare are consistent with the predictions of thick-target non-thermal beam model.

Dennis, B. R.↗
NASA NTRS2002

Structural Modeling of a Five-Meter Thin Film Inflatable Antenna/Concentrator

Inflatable structures have been the subject of renewed interest in recent years for space applications such as communications antennas, solar thermal propulsion, and space solar power. A major advantage of using inflatable structures in space is their extremely light weight. An obvious second advantage is on-orbit deployability and related space savings in the launch configuration. A recent technology demonstrator flight for inflatable structures was the Inflatable Antenna Experiment (IAE) that was deployed on orbit from the Shuttle Orbiter. Although difficulty was encountered in the inflation/deployment phase, the flight was successful overall and provided valuable experience in the use of such structures. Several papers on static structural analysis of inflated cylinders have been written, describing different techniques such as linear shell theory, and nonlinear and variational methods, but very little work had been done in dynamics of inflatable structures until recent years. In 1988 Leonard indicated that elastic beam bending modes could be utilized in approximating lower-order frequencies of inflatable beams. Main, et al. wrote a very significant 1995 paper describing results of modal tests of inflated cantilever beams and the determination of effective material properties. Changes in material properties for different pressures were also discussed, and the beam model was used in a more complex structure. The paper demonstrated that conventional finite element analysis packages could be very useful in the analysis of complex inflatable structures. The purposes of this paper are to discuss the methodology for dynamically characterizing a large 5-meter thin film inflatable reflector, and to discuss the test arrangement and results. Nonlinear finite element modal results are compared to modal test data. The work is significant and of considerable interest to researchers because of 1) the large size of the structure, making it useful for scaling studies, and 2) application of commercially available finite element software for modeling pressurized thin-film structures.

Smalley, Kurt B.↗
NASA NTRS1992

The modeling of piezoceramic patch interactions with shells, plates and beams

General models describing the interactions between a pair of piezoceramic patches and elastic substructures consisting of a cylindrical shell, plate and beam are presented. In each case, the manner in which the patch loads enter both the strong and weak forms of the time-dependent structural equations of motion is described. Through force and moment balancing, these loads are then determined in terms of material properties of the patch and substructure (thickness, elastic properties, Poisson ratios), the geometry of the patch placement, and the voltages into the patches. In the case of the shell, the coupling between banding and inplane deformations, which is due to the curvature, is retained. These models are sufficiently general to allow for potentially different patch voltages which implies that they can be suitably employed when using piezoceramic patches for controlling system dynamics when both extensional and bending vibrations are present.

Banks, H. T.↗
NASA NTRS2018

Comparing Free-Free and Shaker Table Model Correlation Methods Using Jim Beam

Finite element model correlation as part of a spacecraft program has always been a challenge. For any NASA mission, the coupled system response of the spacecraft and launch vehicle can be determined analytically through a Coupled Loads Analysis (CLA), as it is not possible to test the spacecraft and launch vehicle coupled system before launch. The value of the CLA is highly dependent on the accuracy of the frequencies and mode shapes extracted from the spacecraft model. NASA standards require the spacecraft model used in the final Verification Loads Cycle to be correlated by either a modal test or by comparison of the model with Frequency Response Functions (FRFs) obtained during the environmental qualification test. Due to budgetary and time constraints, most programs opt to correlate the spacecraft dynamic model during the environmental qualification test, conducted on a large shaker table. For any model correlation effort, the key has always been finding a proper definition of the boundary conditions. This paper is a correlation case study to investigate the difference in responses of a simple structure using a free-free boundary, a fixed boundary on the shaker table, and a base-drive vibration test, all using identical instrumentation. The NAVCON Jim Beam test structure, featured in the IMAC round robin modal test of 2009, was selected as a simple, well recognized and well characterized structure to conduct this investigation. First, a free-free impact modal test of the Jim Beam was done as an experimental control. Second, the Jim Beam was mounted to a large 20,000 lbf shaker, and an impact modal test in this fixed configuration was conducted. Lastly, a vibration test of the Jim Beam was conducted on the shaker table. The free-free impact test, the fixed impact test, and the base-drive test were used to assess the effect of the shaker modes, evaluate the validity of fixed-base modeling assumptions, and compare final model correlation results between these boundary conditions.

Modal Test↗
NASA NTRS1965

The space revolution NASA News Release

Comparison of ultimate load carrying capacity of laterally restrained/unrestrained, reinforced/unreinforced cement mortar model beams and two-way panels

INDUSTRY↗
NASA NTRS1973

Stabilizing the elastic modes of the Space Shuttle vehicle during launch.

The influence of vibration modes on the vehicle control system stabilization problem is examined with a conventional, nonadaptive, single-rate-sensor autopilot. The linear stability analyses are based upon symmetric and antisymmetric modal data generated from flexible-beam models. Primary emphasis is placed upon using only the three orbiter engines as control effectors. Principal control system variables considered are the effective autopilot rate and attitude gains, rate and attitude sensor locations, and lead/lag stability compensation. Results indicate that a multiple-sensor autopilot configuration will be necessary to achieve satisfactory vibration mode stability margins.

Greiner, H. G.↗
NASA NTRS1975

X-ray emission from high temperature plasmas

The bremsstrahlung X-rays from a plasma focus device were investigated with emphasis on the emission versus position, time, energy, and angle of emission. It is shown that low energy X-rays come from the plasma focus region, but that the higher energy components come from the anode. The emission is anisotropic, the low energy polar diagram resembling a cardioid, while the high energy emission is a lobe into the anode. The plasma parameters were considered indicating that even in the dense focus, the plasma is collisionless near the axis. By considering the radiation patterns of relativistic electrons a qualitative picture is obtained, which explains the measured polar diagrams, assuming the electrons that produce the X-rays have velocity vectors lying roughly in a cone between the point of focus and the anode. The average electron energy is about 3keV at the focus and about 10 keV on the anode surface. Results are consistent with the converging beam model of neutron production.

Harries, W. L.↗
NASA NTRS1975

Nonlinear seismic analysis of a reactor structure impact between core components

The seismic analysis of the FFTF-PIOTA (Fast Flux Test Facility-Postirradiation Open Test Assembly), subjected to a horizontal DBE (Design Base Earthquake) is presented. The PIOTA is the first in a set of open test assemblies to be designed for the FFTF. Employing the direct method of transient analysis, the governing differential equations describing the motion of the system are set up directly and are implicitly integrated numerically in time. A simple lumped-nass beam model of the FFTF which includes small clearances between core components is used as a "driver" for a fine mesh model of the PIOTA. The nonlinear forces due to the impact of the core components and their effect on the PIOTA are computed.

Hill, R. G.↗
NASA NTRS1979

Plotting max/min data envelopes

Study of maximum and minimum load distributions along structural section is aided by visual display of load distribution data. Maximum/minimum envelope plot program plots these envelopes of the stresses and shear loads at selected points in beam modeled by series of finite elements. Digital output for engineers and management is presented for quick analysis and understanding.

Furuike, T.↗
NASA NTRS1977

Response of periodic beam to supersonic boundary-layer pressure fluctuations

The response of a periodic beam (modeling a periodic fuselage) to supersonic boundary-layer pressure fluctuations is analyzed on the basis of a scheme in which a decaying turbulence is treated as a superposition of frozen-pattern components, thus allowing the structural response to be similarly superposed and the advantage of frozen-pattern analysis to be maximally utilized. The fundamental solution required for the construction of the total response is one corresponding to the excitation of a frozen-pattern sinusoid. To obtain this fundamental solution, the formulation follows Mead's wave-propagation method (1971), but also takes into account the effect of freestream velocity on the same side of the turbulence excitation and the effect of a cavity on the opposite side of the excitation. As a numerical example, the spectral density of the structural response is computed and the results are compared with experimental data.

Lin, Y. K.↗
NASA NTRS1980

The polarization and directivity of solar-flare hard X-ray bremsstrahlung from a thermal source

The polarization and directivity of hard X-ray bremsstrahlung from a thermal source consisting of a region in which a thermal flux drives a pair of steel collisionless conduction fronts were evaluated. The conduction fronts are symmetrically driven from a central region, heated by the flare energy dissipation process. By comparing results with similar calculations based on a nonthermal thick-target electron beam model of the source, it was aimed to determine the degree to which the observed polarization and directivity of solar flare hard X-rays favor either model. Results which exhibit significant polarization and directivity of the hard X-ray radiation emitted by the source are produced by using Maxwellian electron-phase-space distribution functions modified to take into account a directional heat flux and a steady direct current in the X-ray source, and a fully relativistic treatment of the bremsstrahlung emission process. The results are consistent with solar hard X-ray anisotropy and polarization observations to date, although these observations are too crude to be conclusive.

Emslie, A. G.↗
NASA NTRS1980

Aircraft wing weight build-up methodology with modification for materials and construction techniques

An aircraft wing weight estimating method based on a component buildup technique is described. A simplified analytically derived beam model, modified by a regression analysis, is used to estimate the wing box weight, utilizing a data base of 50 actual airplane wing weights. Factors representing materials and methods of construction were derived and incorporated into the basic wing box equations. Weight penalties to the wing box for fuel, engines, landing gear, stores and fold or pivot are also included. Methods for estimating the weight of additional items (secondary structure, control surfaces) have the option of using details available at the design stage (i.e., wing box area, flap area) or default values based on actual aircraft from the data base.

York, P.↗
NASA NTRS1982

Microwave and hard X-ray observations of a solar flare with a time resolution of better than 100 MS

Simultaneous microwave and X-ray observations are presented for a solar flare detected on 1980 May 8 starting at 1937 UT. The X-ray observations were made with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission and covered the energy range from 28-490 keV with a time resolution of 10 ms. The microwave observations were made with the 5 and 45 foot antennas at the Itapetinga Radio Observatory at frequencies of 7 and 22 GHz, with time resolutions of 100 ms and 1 ms respectively. Detailed correlation analysis of the different time profiles of the event show that the major impulsive in the X-ray flux preceded the corresponding microwave peaks at 22 GHz by about 240ms. For this particular burst the 22 GHz peaks preceded the 7 GHz by about 1.5s. Observed delays of the microwave peaks are too large for a simple electron beam model but they can be reconciled with the speeds of shock waves in a thermal model.

Kaufmann, P.↗
NASA NTRS1982

Transport of energetic electrons in a fully ionized hydrogen plasma

A Monte Carlo method for calculating energetic electron transport in a plasma is presented. The energy loss and angular deflection due to Coulomb collisions as a function of travel distance and energy are derived for energetic electrons in a fully ionized plasma with a uniform magnetic field. Formulas which include the effect of nonuniform B fields on the angular deflection are derived. The Monte Carlo method is applied to the thick-target beam model in which the energetic electrons are injected vertically downward.

Bai, T.↗