Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “base effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hydrocarbon-based membranes cost-effectively manage species transport and increase performance in thermally regenerative batteries

Low-temperature heat (T<130°C) can be utilized by thermally regenerative batteries (TRBs) for power production, allowing the thermal energy to be converted to storable chemical potential energy. However, TRBs suffer from high ohmic losses and ammonia crossover, which has slowed their development. In this study, we examined how the use of six different membranes influenced TRB performance, determined the most influential membrane parameters, and identified promising membrane candidates that cost-effectively increase TRB performance. Of the six membranes examined, an inexpensive, hydrocarbon CEM (Selemion CMVN) had low ammonia crossover without compromising resistance, resulting in good performance across all metrics studied. A thin anion exchange membrane (Sustainion, 50 microns) showed a high peak power density of 82 mW cm –2 due to low resistance, but the average power density and energy density were low due to high ammonia flux. Full discharge curves using Selemion CMVN provided an average power density of 26 ± 7 mW cm –2 with an energy density of 2.9 Wh L –1 , which were large improvements on previous TRBs. A techno-economic analysis showed that Selemion CMVN had the lowest levelized cost of storage ($410 per MWh) at an applied current density of 50 mA cm –2 .

25 ENERGY STORAGE↗
DOE OSTI2022

Tethering Effects in Oligomer-Based Metal–Organic Frameworks

Metal–organic frameworks (MOFs) can be con- structed using conventional molecular linkers or polymeric linkers (polyMOFs), but the relationship and relative properties of these related materials remain understudied. As an intermediate between these two extremes, a library of oligomeric ligand precursors (dimers, trimers) was used to prepare a series of oligomeric-linker MOFs (oligoMOFs) based on the prototypical IRMOF-1 system. IRMOF-1 was found to be remarkably tolerant to a wide variety of oligomeric linkers, the use of which greatly enhanced the MOF yield and prevented framework interpenetration. Tether length-dependent ordering of ligand and metal cluster orientations was also observed in these oligoMOFs. Improved low-humidity stability was found in oligoIRMOF-1 samples, with surface area preservation varying as a function of tether length and a complete suppression of crystalline hydrolysis products for all oligoIRMOF-1 materials. Furthermore, these findings pave the way toward a better understanding of the structure–function relationships between monomeric, oligomeric, and polymeric MOFs and highlight an underutilized strategy for tuning MOF properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Strong Relativistic Effects in Lanthanide-Based Single-Molecule Magnets

Lanthanide-based single-molecule magnets (SMMs) are promising building blocks for quantum memory and spintronic devices. Designing lanthanide-based SMMs with long spin relaxation time requires a detailed understanding of their electronic structure, including the crucial role of the spin-orbit coupling (SOC). While traditional calculations of SOC using the perturbation theory applied to a solution of the non-relativistic Schrödinger equation are valid for light atoms, this approach is questionable for systems containing heavy elements such as lanthanides. We investigate the accuracy of the perturbation estimates of SOC by variationally solving the Dirac equation for the [DyO] + molecule, a prototype of a lanthanide-based SMM. We show that the energy splittings between the M J states involved in spin relaxation depend on the interplay between strong SOC and dynamic electron correlations. Here, we demonstrate that this interplay affects the resonances between the spin and vibrational transitions, and, therefore, the spin relaxation time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Molecular dynamics based study on the effects of cation size on the local structure and diffusion in polymerized ionic liquids

We have used coarse-grained molecular dynamics simulations to understand the effect of cation size on ion diffusion in polymerized ionic liquids at temperatures well above the glass transition temperature of the polymers. We investigated dependencies of the diffusion constant on the cation radius and static dielectric constant and interpreted these results in terms of underlying structural changes, and decoupling phenomenon. We have found non-monotonic effects of the cation radius on the diffusion constant, with a maximum at an intermediate radius resulting from two different size dependent effects. Changes in the radial distribution functions characterizing spatial distribution of cations with respect to anions result in a monotonic increase in the coordination number. This yields an increase in the effective interaction energy as a function of cation radius, which can explain the decrease in the diffusion constant. This increase is counteracted at small cation radii by a corresponding increase in decoupling of cation and anion dynamics. In addition, the diffusion constant is found to increase on increasing the static dielectric constant for all radii of the cations. These results highlight the significant role of decoupling in designing polymerized ionic liquids with an enhanced diffusion constant of cations.

Gillespie, Colin [ORNL] (ORCID:0000000320287080)↗
DOE OSTI2026

Incident excitation effects on ZnO-based photoluminescence

Zinc oxide (ZnO) is an attractive semiconductor material owing to a wide band gap, large exciton binding energy, and strong luminescent properties. Two distinct spectral regions are present in the room temperature emission of this material: a narrow line in the UV/near-UV region that is excitonic in nature and a lower energy broad emission band centered in the green/yellow region. Commercially available ZnO particles containing excess Zn and oxygen vacancy defect sites (referred to as ZnO:Zn) were excited using three light sources to study different radiative recombination regimes of the as-received powders. First, a UV LED at a center wavelength of 365 nm provided low irradiance (0.02–0.08 W/cm 2 ) with varying pulse widths (continuous operation to 16 ns). Second, the third harmonic of a pulsed Nd:YAG laser provided high irradiances (∼10 4 –10 6 W/cm 2 ) at a fixed nominal pulse width of 5 ns. Finally, a continuous polychromatic synchrotron X-ray source was also used to excite the ZnO:Zn powders. During UV LED excitation, a low number of carriers are created in the material, leading to an anticipated linear relationship between luminescence and irradiance. This held true for defect luminescence; however, there was an observed enhancement of exciton emission relative to the UV LED intensity as the pulse width was decreased, independent of irradiance. During UV laser excitation, the number of carriers was significantly increased, raising the material into a bimolecular recombination regime, which produced exciton emission much stronger than visible band emission. Finally, spectra obtained during synchrotron X-ray excitation, whose continuous illumination and higher penetration depth yielded higher emission from defect sites relative to exciton emission. A redshift in the exciton emission was also observed as excitation pulse width and sample temperature were varied, and is discussed.

Westphal, Eric Robert [Sandia National Lab. (SNL-N↗
DOE OSTI2023

Reading Between the Lines: Measuring the Effects of Linguistic-Based Indicators of Deception on Experts’ Identification and Categorization of Disinformation

There is currently very limited research into how experts analyze and assess potentially fraudulent content in their expertise areas, and most research within the disinformation space involves very limited text samples (e.g., news headlines). The overarching goal of the present study was to explore how an individual’s psychological profile and the linguistic features in text might influence an expert’s ability to discern disinformation/fraudulent content in academic journal articles. At a high level, the current design tasked experts with reading journal articles from their area of expertise and indicating if they thought an article was deceptive or not. Half the articles they read were journal papers that had been retracted due to academic fraud. Demographic and psychological inventory data collected on the participants was combined with performance data to generate insights about individual expert susceptibility to deception. Our data show that our population of experts were unable to reliably detect deception in formal technical writing. Several psychological dimensions such as comfort with uncertainty and intellectual humility may provide some protection against deception. This work informs our understanding of expert susceptibility to potentially fraudulent content within official, technical information and can be used to inform future mitigative efforts and provide a building block for future disinformation work.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Inhomogeneous Distribution and Coarsening of γ″ Precipitates in a Ni-Based Superalloy and Their Effect on Creep

γ″ was found to be the main precipitate strengthening phase with no detectable g′ in both M725 alloys. After creep, the grip/gage sections of the crept M725-Nb/Ta exhibited preferential coarsening and inhomogeneous distribution of g″ platelets, and sandwich-like structures, comprising of cubic γ′ precipitates with small γ″ discs on each facet. This g″ variant selection behavior taking place in the grip section with no stress applied was different from the typical stress-induced variant selection reported in previous literature.

Hung, Chang-Yu↗
DOE OSTI2022

Unravelling the Role of Electron Acceptors for the Universal Enhancement of Charge Transport in Quinoid-Donor-Acceptor Polymers for High-Performance Transistors

The quinoid-donor-acceptor (Q-D-A) strategy has recently emerged as a promising approach for constructing high mobility semiconducting polymers. In order to fully explore the potential of this strategy in improving the charge transport and elucidating the structure-property-performance relationships in Q-D-A polymers, a series of new polymers with different electron acceptor units and backbone coplanarity have been synthesized and characterized. In this work, all of the resulting Q-D-A polymers exhibit much more planar backbone conformations in comparison to their donor-acceptor (D-A) counterparts. Moreover, organic field-effect transistors based on Q-D-A polymers exhibit excellent effective hole mobilities in a range of 0.44 to 3.35 cm 2 V –1 s –1 , most of which are orders of magnitude higher than those of their corresponding D-A polymers. Notably, the hole mobility of 3.35 cm 2 V –1 s –1 is among the highest for the quinoidal-aromatic polymers characterized by conventional spin-coating methods. Furthermore, the role of electron acceptors in Q-D-A polymers has been comprehensively investigated. Polymers with stronger acceptor units are more inclined to deliver edge-on lamellas, high film crystallinity, small effective hole masses, and decent operational stability. The detailed structure-property-device performance relationship will pave the way toward high performance semiconducting polymers using the potent Q-D-A strategy.

36 MATERIALS SCIENCE↗