UAS, Tethered Balloons, and the US DOE ARM Program Facilities at Oliktok Point Alaska.
Abstract not provided.
Ivey, Mark D.↗
SEARCH · Engineering Papers
Results for “ballooning”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-Resolution Cloud Probe for the Arctic Shark UAV and Tethered Balloon Systems
Explore the source record for details and available documents.
54 ENVIRONMENTAL SCIENCES↗
Grassy ELM regime at low pedestal collisionality in high-power tokamak plasma
Spontaneous mitigation of giant ELMs and appearance of grassy ELMs have been observed repeatedly at low pedestal collisionality (${\nu }_{\mathrm{e},\mathrm{p}\mathrm{e}\mathrm{d}}^{{\ast}}\sim 0.15$) in the high-power (P inj > 13 MW) hybrid scenario in DIII-D. Higher β p and higher q 95 appear to be beneficial to achieving the grassy ELM regime. The grassy ELM H-mode plasma shows high energy confinement performance (H 98y2 up to over 1.5) under the conditions of high neutral beam torque and high core rotation. The pedestal width appears to exceed the EPED1.0 model prediction by more than 50%. Pedestal stability analysis performed with the ELITE code indicates that the stability against low-n kink/peeling modes is improved with increased auxiliary heating power and the operational point in the grassy ELM regime is located near the ballooning boundary. The pedestal stability characteristics during the grassy ELM crashes have been investigated in comparison with the giant ELM crashes based on plasma profiles experimentally measured with high resolution and accuracy. It has been found that the underlying mechanism for the observed small-amplitude ELM crashes is mainly the expansion of the ballooning stability boundary induced by an initial radially localized collapse in the pedestal, which helps to stop the growth of instabilities and further collapse of the pedestal. The effect of electron density pedestal on mitigating edge localized instabilities has been analyzed by numerical simulation, suggesting that the electron density pedestal characterized by high n e,sep /n e,ped and low density gradient helps to stabilize peeling-ballooning modes because of a low pressure pedestal gradient and to lower the ballooning boundary mainly because of a low ion diamagnetic frequency in the pedestal region, thus triggering ballooning instabilities and producing the intrinsic grassy ELMs. Numerical simulation of the Chinese fusion engineering test reactor (CFETR) with the SOLPS code indicates that the separatrix density might be insensitive to the electron diffusivity in the pedestal region and increase with the power flowing from the core region to the edge region. Furthermore, pedestal stability analysis suggests that the flat density pedestal with high separatrix density obtained in the high-power plasma in CFETR would make the operational point close to the ballooning boundary, which is considered to help destabilize ballooning instabilities and facilitate the access to the grassy ELM regime.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
The effect of triangularity on predicted pedestals for the CFETR
In this work, the dominant unstable magnetohydrodynamic mode and its stable region in the pedestal of the China Fusion Engineering Test Reactor are studied by numerical modeling with the peeling-ballooning theory over a wide range of triangularities (δ) and collisionalities (υ*). A new accessible stable region is found at δ<−0.1 for large βN,ped and υ*. This new stable region expands toward lower βN,ped and υ* with decreasing δ and is totally covered by the peeling unstable region with δ=−0.5 because of the increasing trapped particle fraction (ft,eff). The sensitivity of this new stable region to the kinetic ballooning mode constraint and elongation is studied. For negative and low δ<0.1, the boundary of the first stable region is determined from the ballooning mode. For δ>0.1, the peeling mode becomes dominant as the boundary approaches low s with low υ*, while the ballooning mode is still dominant at the boundary with high υ*. When δ increases beyond 0.46, the first stable region is expanded, and access to the second stable region of the ballooning mode opens up. The entire newly connected region of the first and second stable regions keeps expanding with further increases in δ until δ=0.6. Beyond this value, the ballooning mode becomes more unstable with increasing δ, while the peeling mode is approximately unchanged with increasing δ in this range. The change in the dominant mode and the stable region with increasing δ can be explained by the trade-off between the stabilization effect from the deeper poloidal magnetic well and destabilization due to the enlarged drive term.
Physics↗
Impact of pedestal density gradient and collisionality on ELM dynamics
BOUT++ turbulence simulations are conducted to capture the underlying physics of small ELM characteristics achieved by increasing separatrix density via controlling strike points from vertical to horizontal divertor plates for three EAST discharges. BOUT++ linear simulations show that the most unstable modes change from high-n ideal ballooning modes to intermediate-n peeling–ballooning modes and eventually to peeling–ballooning stable plasmas in the pedestal. Nonlinear simulations show that the fluctuation is saturated at a high level for the lowest separatrix density. The ELM size decreases with increasing separatrix density, until the fraction of this energy lost during the ELM crash becomes less than 1% of the pedestal stored energy, leading to small ELMs. Simulations indicate that small ELMs can be triggered either by the marginally peeling–ballooning instability near the peak pressure gradient position inside the pedestal or by a local instability in the pedestal foot with a larger separatrix density gradient. The pedestal collisionality scan for type-I ELMs with steep pedestal density gradient shows that both linear growth rate and ELM size decrease with increasing collisionality. On the contrary, the pedestal collisionality and pedestal density width scan with a weak pedestal density gradient indicate small ELMs can either be triggered by a high-n ballooning mode or by a low-n peeling mode in a low collisionality region 0.04–0.1. We report the simulations indicate the weaker the linear unstable modes near marginal stability with small linear growth rate, the lower nonlinearly saturated fluctuation intensity and the smaller turbulence spreading from the linear unstable zone to stable zone in the nonlinear saturation phase, leading to small ELMs.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Impact of LWR assembly structural features on cladding burst behavior under LOCA conditions
This provides an initial scoping study on clad balloon and burst behavior for burnup extension of reactor fuel. The associated issues with burnup extension are fuel fragmentation, relocation, and dispersal in the event of cladding failure. The general finding of this work is that the structural features, spacer grids and mixing vanes, locally suppress cladding deformation but have little impact on the overall clad performance during loss-of-coolant accidents. The work detailed in a previous report by Capps et al. focused on core optimization via neutronics, thermal hydraulics and thermomechanical analysis for burnups beyond 62 GWD/tU and enrichments above 5%. Uncertainty of fuel fragmentation relocation and dispersal in high-burnup rods during accident conditions was also investigated. The dispersal aspect of fuel fragmentation depends on cladding rupture. Thus, assessing uncertainties in the rupture behavior is helpful in estimating the dispersal of high-burnup fuel. This study builds on the previous work by assessing the impact of assembly structural features on cladding balloon and burst behavior in a full-length fuel rod. In this work, the BISON fuel performance code was used to generate 2D radial and height meshes containing structural features commonly used in nuclear fuel assemblies. First, meshes were generated with spacer grids. Results were then compared to the cladding burst temperature and balloon strain results from the previous work. A mesh sensitivity study was performed to ensure that mixing vanes and spacer grid effects were appropriately considered, resulting in a more refined mesh than the previous study. The balloon deformation and burst times of the cladding were compared to the original case. Consideration was also given to the effect of rod initial pressure. In conclusion, 3D quarter rod simulations were also performed and found good agreement with the 2D simulations in clad deformation and reasonable agreement in burst times.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
A “Floatilla” of Airborne Seismometers for Venus
Abstract Barometers floating on high‐altitude balloons in the relatively clement cloud layer on Venus could detect and characterize acoustic waves generated by seismic activity, avoiding the need for high‐temperature electronics required for surface seismology. Garcia et al. (2022, https://doi.org/10.1029/2022GL098844 ) recently demonstrated the detection of low‐frequency sound (infrasound) caused by earthquakes of magnitudes 7.3 and 7.5 from stratospheric balloons nearly 3,000 km away from the epicenter. They provided a preliminary demonstration of earthquake magnitude and location inversion, and the determination of S‐ and Rayleigh wave velocities using only their acoustic signature. Large earthquakes produce low‐frequency seismic waves that penetrate the interiors of planets; their detection at continental‐scale distances from a high‐vantage point demonstrates the feasibility of balloon‐based investigations of Venus' interior. We contextualize these results within the effort to perform seismology on Venus from balloons, discuss its limitations, and share perspectives on open research questions in this area.
Krishnamoorthy, Siddharth↗
Different roles of elongation and triangularity in the H-mode pedestal height enhancement through strong plasma shaping
While the peeling–ballooning mode is known to be stabilized by strong plasma shaping in a high-confinement mode (H-mode), a significant difference is found in the roles of elongation and triangularity. The elongation mainly stabilizes the high-n ballooning branch, while the triangularity of the low-n peeling one with some destabilization of the high-n ballooning one, where n is the toroidal mode number. This difference is conjectured mainly due to the magnetic shear effect which is substantially enhanced in a high triangularity regime, giving a destabilization on the ballooning branch, while a stabilization on the peeling one. As shown here, an important consequence of these different roles of the two shape parameters is that they should work together to stabilize simultaneously both branches of the PBM, implying the necessity of synergy between them for the large pedestal height enhancement.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
H-mode pedestal improvements with neon injection in DIII-D
Improvements in the H-mode pedestal pressure and global energy confinement were determined on DIII-D with both 3 and 6 MW of neutral beam (NBI) heating with neon injection. The pedestal pressure increased, primarily associated with a significant increase in the pedestal density with a relatively smaller decrease in the pedestal temperature. At the same neon injection rate, a rapid decrease in edge localized mode (ELM) frequency and ~35% increase in plasma stored energy were observed in the 3 MW discharge, while in the 6 MW discharge, the ELM frequency was gradually decreased and the plasma stored energy gradually increased by up to 20%. The measured pedestal widths from both 3 and 6 MW discharges matched the EPED1.0 width scaling, ${\Delta _{{\psi _N}}} = 0.089\beta _{p,ped}^{1/2}$ ,data-, within 20% deviations before and after neon injection. The peeling-ballooning mode (PBM) stability analysis showed that after neon injection, the ballooning stability boundary was increased, while the peeling stability boundary only dropped once the neon level was relatively high. The ballooning stability boundary increase with neon injection is consistent with increase of the ion diamagnetic stabilization (i.e. including the contribution from carbon, neon as well as deuterium ions) which is used in the criterion to determine when the calculated linear growth rates of PBM are unstable. Consequently, the new ELITE computed PBM boundaries were more consistent with the operating points than when only deuterium was included. This in turn suggests that the impurity may help to improve pedestal pressure through affecting ion diamagnetic frequency in the pedestal region, which could positively lead to the ballooning stability boundary extension.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Density limit in peeling-limited pedestals at and above the Greenwald value in DIII-D high poloidal beta plasmas
High pressure, peeling limited pedestals with pedestal normalized beta β N,ped >2 and pedestal top density n ped at or above the Greenwald density nG have been achieved in DIII-D high poloidal beta plasmas, with high global normalized beta β N >3 and energy confinement H 98 ~1.2-1.7. Higher β N allows higher pedestal density above the Greenwald value and higher pedestal pressure, even with a low injected torque. MHD modeling confirms that the experimental profiles lie near the peeling-mode unstable boundary with high normalized pressure gradient βMHD and high edge current density. Experimental analysis and stability calculations indicate that the high poloidal beta with strong Shafranov shift, high βMHD and weak/negative magnetic shear improves the pedestal stability by decoupling the peeling and ballooning modes and stabilizing the ballooning modes, thus facilitating access to the second stable region of peeling-ballooning mode. The access to the second stable peeling-ballooning stability region opens Super-H-like channels without extremely strong shaping or strong torque injection. The high-pressure peeling pedestal allows the pedestal density to go beyond the Greenwald limit with strong ExB shear maintained: pedestal pressure increases with pedestal density even when n ped >n G , until reaching the ideal MHD instability boundary, where giant ELMs occur. The giant ELMs are dominated by a strong n=1 component and cause a large reduction of the edge pressure, but a negligible change of the core pressure, consistent with kink/peeling-mode induced instability. The pedestal recovers from the collapse and typically sustains a high baseline density, around the Greenwald limit, during the whole discharge duration. Experiments also found that internal transport barriers and n ped ~0.9nG, peeling limited pedestals could be simultaneously achieved in high β N plasmas, while an internal feedback between ITB strength and pedestal performance is found.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Acoustic waves from the 2023 April 20 SpaceX Starship rocket explosion travelling in the elevated ‘AtmoSOFAR’ channel
SUMMARY The ability to detect low-frequency sounds from distant energetic events depends on the temperature and wind structure of the atmosphere. Thus, from time to time surface-based acoustic detectors may not be able to capture sounds arriving from certain directions. However, the temperature minimum at the tropopause may create an acoustic duct called the ‘AtmoSOFAR’ channel that could transmit acoustic waves laterally—but perhaps not to the ground. If true, then elevated sensors such as those borne aloft by balloons would record the signatures even in regions where ground-based sensors cannot. This has been difficult to prove because high altitude acoustic sources are rare and balloon deployments are sporadic. This work describes the detection and characterization of powerful acoustic waves generated during the launch and terminal explosion of the SpaceX Starship rocket on 2023 April 20 using a pair of microbarometers on a stratospheric balloon. The signals travelled through the AtmoSOFAR channel, carrying information about the size and nature of their source. This channel also appears to leak some acoustic energy to the ground, in agreement with previous studies. The acoustic yield of the Starship terminal explosion was on the order of $10^3$ tons trinitrotoluene equivalent, which agrees with the estimated fuel load of the vehicle to about a factor of 2, but is two orders of magnitude larger than optical estimates. These results support an earlier study that claimed lateral transmission of sound from a smaller rocket through the AtmoSOFAR channel. The transmission of source information through the AtmoSOFAR channel motivates its use for monitoring other natural and anthropogenic events using balloon-borne sensors. This may become increasingly important as more and more private and government entities conduct spacecraft launches and reentries. It may also provide a means of monitoring clear air turbulence and other sound-generating atmospheric phenomena at a distance.
58 GEOSCIENCES↗
Vertical column dual-comb spectroscopy to a TBS
Open-path dual-frequency-comb spectroscopy (DCS) is a broadband, high spectral resolution, and high precision method for measuring gas concentrations over kilometer-scale paths. It has been used for detection and quantification of emissions of pollutants, hazardous gasses, and greenhouse gasses (GHGs). DCS has been shown to measure trace-gas mixing ratios with 0.14%-0.4% agreement between instruments. To achieve high signal-to-noise ratios (SNRs) with DCS, comb light is targeted onto a retroreflector at the end of the measurement path, which returns the signal to a detector co-located with the launch signal. Installing the retroreflector on a mobile platform such as a balloon or unmanned aerial vehicle (UAV) extends the capabilities of DCS by enabling variable path lengths, greater mobility, and access to higher altitudes. Mobile-target DCS has many uses in plume and leak detection, emissions modeling, and planetary boundary layer (PBL) studies. It is a promising method for observing vertical distributions of GHGs and mixing processes in the PBL, which are difficult to measure but important for pollution and climate monitoring as well as for understanding transport of gasses through the atmosphere. Tethered balloons are an intriguing platform because they enable longer flight durations and higher altitudes than easily obtainable with a UAV and thus allow for column measurements up to and above the PBL. New measurements completed in October/November 2024 reach the highest altitudes above ground level yet achieved by mobile-target DCS. For these measurements, the retroreflector was mounted on a 7 m diameter tethered helium balloon. An actively tracking gimbal on the ground holds the DCS launch telescope and keeps the 5 cm beam pointed onto the retroreflector while the balloon is lifted, lowered, and moved by wind and turbulence.
atmosphere↗
Achieving a robust grassy-ELM operation regime in CFETR
We have identified a robust grassy-edge localized mode (ELM) operation regime for future tokamak reactors. The regime exists within a pedestal top electron collisionality (ν*) window at high global poloidal beta (β p ). The existence of an upper ν* limit for grassy-ELMs is consistent with results previously reported in experiments (Oyama et al 2010 Nucl. Fusion 50 064014), while the existence of a lower ν* limit has not been reported previously. Using EPED and BOUT++, a theoretical model that quantitatively explains the physics of the grassy-ELMs within the window, which distinguishes them from the small mixed-ELMs at lower ν*, is presented for the first time. A peeling-ballooning stability boundary is obtained by scanning the operating density space. The change in density corresponds to a change in ν* that affects the pedestal bootstrap current. High β p leads to a strong Shafranov shift, which affects the flux surface averaged pressure drive. The two effects combine to create a peeling-dominated window in intermediate ν* buffered by ballooning-dominated regimes. Only the peeling-dominated regime shows a cyclic behavior in the perturbed pressure during the nonlinear simulation of an ELM crash, reminiscent of grassy-ELM dynamics. Similarly, the energy released across the separatrix is demonstrated to be significantly smaller. The quick recovery of the ELM crash is explainable by the rapid rise of a low n kink-peeling instability when the pedestal current I ped exceeds a threshold at high β p . It minimizes the excursion beyond marginal stability and is absent in the ballooning-dominated regime. Comparison with recent experiments over a range of β p and ν* strongly supports the physical picture proposed by the modeling.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Critical role of current-driven instabilities for ELMs in NSTX
The impact of different extended-magnetohydrodynamic (MHD) contributions on the stability thresholds of peeling-ballooning modes in ELMing and ELM-free plasmas in the spherical tokamak NSTX is investigated with the initial value code M3D-C1. We show that ELMing discharges in NSTX are limited by resistive current-driven peeling modes, whereas non-ELMing wide-pedestal H-mode discharges are located near the ideal pressure-driven ballooning threshold. It is demonstrated that extended-MHD can lead to more reliable edge stability predictions than existing ideal-MHD models. Resistive peeling-ballooning modes are found to exist well before the ideal stability threshold is met, and kink-peeling modes exhibit considerable sensitivity to plasma resistivity. Other effects not considered in ideal-MHD models affect PB modes in NSTX in a weaker way. Gyroviscous stress appears stabilizing such that the stability boundary lies closer to the experimental point. Equilibrium rotation can suppress ideal core modes and thus isolate edge modes. These results are important for the development of a predictive pedestal model for low-aspect ratio tokamaks.
pedestal↗
Prospects for H-mode inhibition in negative triangularity tokamak reactor plasmas
Instability to high toroidal mode number ($\textit{n}$) ballooning modes has been proposed as the primary gradient-limiting mechanism for tokamak equilibria with negative triangularity (NT) (δ) shaping, preventing access to strong H-mode regimes when δ is sufficiently negative. To understand how this mechanism extrapolates to reactor conditions, we model the infinite-$\textit{n}$ ballooning stability as a function of internal profiles and equilibrium shape using a combination of the CHEASE and BALOO codes. While the critical δ required for avoiding 2nd stability to high-$\textit{n}$ modes is observed to depend in a complicated way on various shaping parameters, including the equilibrium inverse aspect ratio, elongation and squareness, equilibria with NT are robustly prohibited from accessing the 2nd stability region, offering the prediction that NT reactors should maintain L-mode-like operation. In order to access high-$\textit{n}$ 2nd stability, the local shear over the entire bad curvature region must be sufficiently negative to overcome curvature destabilization on the low field side. Finally, scalings of the ballooning-limited pedestal height are provided as a function of plasma parameters to aid future scenario design.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Quasi-mode evolution in a stochastic magnetic field
Abstract We present a multi-scale model of quasi-mode evolution in a stochastic magnetic field. The similarity between a quasi-mode and a ballooning mode enables us to address the challenges arising from the disparate geometries in the theories of ballooning modes in the presence of resonant magnetic perturbations. We obtain useful insights into our understanding of ballooning mode dynamics in a stochastic background. To maintain quasi-neutrality at all scales, the beat between the quasi-mode and the stochastic magnetic field drives microturbulence, which drives the turbulent background that promotes mixing and damps the quasi-mode. As a result of the broad mode structure of the quasi-mode, the turbulent viscosity and the turbulent diffusivity produced by the microturbulence are larger than those in our related study on resistive interchange modes. The stochastic magnetic field can also enhance the effective plasma inertia and reduce the effective drive, thereby slowing the mode growth. A nontrivial correlation between the microturbulence and the magnetic perturbations is shown to develop. This could account for the reduction in the Jensen–Shannon complexity of pedestal turbulence in the Resonant Magnetic Perturbation Edge-Localized Mode suppression phase observed in recent experiments. Directions for future experimental and theoretical studies are suggested.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Bridging Land-Surface Fluxes and Aerosol Concentrations to Triggering Convective Rainfall
During the period August 24-28, 2016, a delayed component the GO-Amazon Project, we launched nine altitude-controlled free balloons (CMET). Smaller than typical rawinsondes, CMET are equipped with altitude control, global communication via Iridium satellite, and aspirated sensors. The aims of our effort were to examine the interactions among convective boundary layer and dual river breeze circulations near the confluence of the Tapajos and Amazon Rivers in the eastern Basin. The week-long field campaign was timed to examine the reestablishment of the breeze circulations shortly after the passage of a strong instability line on August 22. Nine CMET were launched at the Curua-Una hydroelectric dam (2.8S; 54.3W), timed to encounter the Tapajos river breeze front by late afternoon. Soundings were made to establish the thickness of interface between the easterly trade and westerly Tapajos breeze circulation. Careful use of sounding strategies allowed these free balloons to track along the northerly channeled flow in the lowest 300 m above the River. Following the river encounter, balloons tracked to the west, sounding to describe the diurnal course of boundary layer in the forest west of the Tapajos River. The longest flight traveled more than 770 km over three days and twice rested overnight in the rain forest canopy. Ancillary data from surface climate and flux stations as well as the Santarem radiosonde, satellite images will be used to illustrate how the breeze circulations are seen near the surface and how they were disrupted by larger-scale events. Comparisons with HYSPLIT trajectories illustrate how sensitive real trajectories are to the refraction that the encounter with the breeze effects. A second effort was intensive analyses of data from the eddy flux tower at the Tapajós National Forest near Santarém Pará Brazil, with special emphasis on the role of clouds and canopy presence on light absorbance and photosynthetic activity.
54 ENVIRONMENTAL SCIENCES↗