Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “azimuth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Azimuthally Dependent Seismic-Wave Coherence at the Source Physics Experiment Large-N Array

Abstract We report on azimuthally dependent seismic scattering at the Source Physics Experiment (SPE) using the large-N array. The large-N array recorded the seismic wavefield produced by the SPE-5 buried chemical explosion, which occurred in April 2016 at the Nevada National Security Site, U.S.A. By selecting a subset of vertical-component geophones from the large-N array, we formed 10 linear arrays, with different nominal source–receiver azimuths as well as six 2D arrays. For each linear array, we analyze wavefield coherency as a function of frequency and interstation distance. For both the P arrival and post-P arrivals, the coherency is higher in the northeast propagation direction, which is consistent with the strike of the steeply dipping Boundary fault adjacent to the northwest side of the large-N array. Conventional array analysis using a suite of 2D arrays indicates that the presence of the fault may help explain the azimuthal dependence of the seismic-wave coherency for all wave types. This fault, which separates granite from alluvium, may be acting as a vertically oriented refractor and/or waveguide.

58 GEOSCIENCES↗

Study of Jet Transverse Momentum and Jet Rapidity Dependence on Dijet Azimuthal Decorrelations

In a collision experiment involving highly energetic particles such as hadrons, processes at high momentum transfers can provide information useful for many studies involving Quantum Chromodynamics (QCD). One way of analyzing these interactions is through angular distributions. In hadron-hadron collisions, the angular distribution between the two leading jets with the largest transverse momentum (p T ) is affected by the production of additional jets. While soft radiation causes small differences in the azimuthal angular distribution of the two leading jets produced in a collision event, additional hard jets produced in the event have more pronounced influence on the distribution of the two leading jets produced in the collision. Thus, the dijet azimuthal angular distribution can serve as a variable that can be used to study the transition from soft to hard QCD processes in a collision event. This dissertation presents a triple-differential study involving the azimuthal angular distribution and the jet transverse momenta, and jet rapidities of the first two leading jets. The data used for this research are obtained from proton-antiproton (p$\bar{p}$) collisions occurring at a center of mass energy of 1.96TeV, using the DØ detector in Run II of the Tevatron Collider at the Fermi National Accelerator Laboratory (FNAL) in Illinois, USA. Comparisons are made to perturbative QCD ( p QCD) predictions at next-to-leading order (NLO).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Compensation of Axis Errors of Azimuth and Zenith Moving Concentrators in Programmable Solar-Tracking Systems

The solar-energy industry is currently concerned with improving software systems of sun-tracking concentrators. It is a feature of programmable tracking that there is no feedback from the tracked object, unlike in the case of optical tracking. In this regard, the accuracy of programmable tracking is affected by a large number of factors—in particular, axis-alignment errors. An error-checking algorithm is considered for the azimuth and zenith concentrator axes in programmable sun tracking. Effects of these errors on the accuracy of programmable tracking are assessed. It is shown that zenith axis errors have the same amount of influence as the vertical deviation of the azimuth axis, primarily affecting the azimuth angle, while its influence on the solar elevation can be neglected. The cumulative effect of axial errors is most noticeable when they have the same signs and lie in the same plane.

14 SOLAR ENERGY↗

The CU 2-D-MAX-DOAS instrument – Part 1: Retrieval of 3-D distributions of NO 2 and azimuth-dependent OVOC ratios

Here, we present an innovative instrument telescope and describe a retrieval method to probe three-dimensional (3-D) distributions of atmospheric trace gases that are relevant to air pollution and tropospheric chemistry. The University of Colorado (CU) two-dimensional (2-D) multi-axis differential optical absorption spectroscopy (CU 2-D-MAX-DOAS) instrument measures nitrogen dioxide (NO 2 ), formaldehyde (HCHO), glyoxal (CHOCHO), oxygen dimer (O 2 –O 2 , or O 4 ), and water vapor (H 2 O); nitrous acid (HONO), bromine monoxide (BrO), and iodine monoxide (IO) are among other gases that can in principle be measured. Information about aerosols is derived through coupling with a radiative transfer model (RTM). The 2-D telescope has three modes of operation: mode 1 measures solar scattered photons from any pair of elevation angle (–20° < EA < +90° or zenith; zero is to the horizon) and azimuth angle (–180° < AA < +180°; zero being north); mode 2 measures any set of azimuth angles (AAs) at constant elevation angle (EA) (almucantar scans); and mode 3 tracks the direct solar beam via a separate view port. Vertical profiles of trace gases are measured and used to estimate mixing layer height (MLH). Horizontal distributions are then derived using MLH and parameterization of RTM (Sinreich et al., 2013). NO 2 is evaluated at different wavelengths (350, 450, and 560 nm), exploiting the fact that the effective path length varies systematically with wavelength. The area probed is constrained by O 4 observations at nearby wavelengths and has a diurnal mean effective radius of 7.0 to 25 km around the instrument location; i.e., up to 1960 km 2 can be sampled with high time resolution. The instrument was deployed as part of the Multi-Axis DOAS Comparison campaign for Aerosols and Trace gases (MAD-CAT) in Mainz, Germany, from 7 June to 6 July 2013. We present first measurements (modes 1 and 2 only) and describe a four-step retrieval to derive (a) boundary layer vertical profiles and MLH of NO 2 ; (b) near-surface horizontal distributions of NO 2 ; (c) range-resolved NO 2 horizontal distribution measurements using an "onion-peeling" approach; and (d) the ratios HCHO to NO 2 ( R FN ), CHOCHO to NO 2 ( R GN ), and CHOCHO to HCHO ( R GF ) at 14 pre-set azimuth angles distributed over a 360° view. Three-dimensional distribution measurements with 2-D-MAX-DOAS provide an innovative, regional perspective of trace gases as well as their spatial and temporal concentration gradients, and they maximize information to compare near-surface observations with atmospheric models and satellites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative study of hadron- and γ-triggered azimuthal correlations in relativistic heavy-ion collisions

In the framework of a multi-phase transport model, initial fluctuations in the transverse parton density lead to all orders of harmonic flows. Hadron-triggered azimuthal correlations include all contributions from harmonic flows, hot spots, and jet-medium excitations, which are isolated by using different initial conditions. We found that different physical components dominate different pseudorapidity ranges of dihadron correlations. Because γ-triggered azimuthal correlations can only be caused by jet-medium interactions, a comparative study of hadron- and γ -triggered azimuthal correlations can reveal more dynamics about jet-medium interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Interpretation of vector magnetograph data including magneto-optic effects. I - Azimuth angle of the transverse field

In this paper, the presence of Faraday rotation in measurements of the orientation of a sunspot's transverse magnetic field is investigated. Using observations obtained with the Marshall Space Flight Center's (MSFC) vector magnetograph, the derived vector magnetic field of a simple, symmetric sunspot is used to calculate the degree of Faraday rotation in the azimuth of the transverse field as a function of wavelength from analytical expressions for the Stokes parameters. These results are then compared with the observed rotation of the field's azimuth which is derived from observations at different wavelengths within the Fe I 5250 A spectral line. From these comparisons, it is found: the observed rotation of the azimuth is simulated to a reasonable degree by the theoretical formulations if the line-formation parameter is varied over the sunspot; these variations are substantiated by the line-intensity data; for the MSFC system, Faraday rotation can be neglected for field strengths less than 1800 G and field inclinations greater than 45 deg; to minimize the effects of Faraday rotation in sunspot umbrae, MSFC magnetograph measurements must be made in the far wings of the Zeeman-sensitive spectral line.

West, E. A.↗

Azimuthal Directivity of Fan Tones Containing Multiple Modes

The directivity of fan tone noise is generally measured and plotted in the sideline or flyover plane and it is assumed that this curve is the same for all azimuthal angles. When two or more circumferential (m-order) modes of the same tone are present in the fan duct, an interference pattern develops in the azimuthal direction both in the duct and in the farfield. In this investigation two m-order modes of similar power were generated in a large low speed fan. Farfield measurements and a finite element propagation code both show substantial variations in the azimuthal direction. Induct mode measurement were made and used as input to the code. Although these tests may represent a worst case scenario, the validity of the current practice of assuming axisymmetry should be questioned.

Heidelberg, Laurence J.↗

Determination of Azimuth Angle at Burnout for Placing a Satellite Over a Selected Earth Position

Expressions are presented for relating the satellite position in the orbital plane with the projected latitude and longitude on a rotating earth surface. An expression is also presented for determining the azimuth angle at a given burnout position on the basis of a selected passage position on the earth's surface. Examples are presented of a satellite launched eastward and one launched westward, each passing over a selected position sometime after having completed three orbits. Incremental changes from the desired latitude and longitude due to the earth's oblateness are included in the iteration for obtaining the azimuth angles of the two examples. The results for both cases are then compared with those obtained from a computing program using an oblate rotating earth. Changes from the selected latitude and longitude resulting from incremental changes from the burn-out azimuth angle and latitude are also analyzed.

Skopinski, T. H.↗

A Mode Detection Method Using the Azimuthal Directivity of a Turbofan Model

The azimuthal, far field directivity of a scale fan model was measured in high resolution. The model is a 12 inch diameter rotor with 16 blades followed by 40 stator vanes. The tests were conducted at the nominal 100% speed corresponding to a tip speed of 905 ft/sec. Measurement of the radiated sound field, forward of the fan, was made in an anechoic chamber with an inflow control device and a baffle separating the aft and forward radiated interaction noise. The acoustic field was surveyed with a circular hoop array of 16 microphones which was moved to 14 axial stations. At each axial station the hoop was rotated in half-degree increments to take 736 points in the azimuthal angle. In addition to sound pressure level, the phase angle relative to a reference microphone was measured at each point. The sound pressure level is shown to vary in patterns by 10-15 dB especially for the fundamental tone but also for the first and second harmonic. A far field mode detection method has been developed and used with the data which determines the modes generated by the fan and which then interact to form the azimuthal directivity.

Thomas, R. H.↗

Determining the Mode, Frequency, and Azimuthal Wave Number of ULF Waves During a HSS and Moderate Geomagnetic Storm

Ultralow frequency (ULF) waves play a fundamental role in the dynamics of the inner magnetosphere and outer radiation belt during geomagnetic storms. Broadband ULF wave power can transport energetic electrons via radial diffusion, and discrete ULF wave power can energize electrons through a resonant interaction. Using observations from the Magnetospheric Multiscale mission, we characterize the evolution of ULF waves during a highspeed solar wind stream (HSS) and moderate geomagnetic storm while there is an enhancement of the outer radiation belt. The Automated Flare Inference of Oscillations code is used to distinguish discrete ULF wave power from broadband wave power during the HSS. During periods of discrete wave power and utilizing the close separation of the Magnetospheric Multiscale spacecraft, we estimate the toroidal mode ULF azimuthal wave number throughout the geomagnetic storm. We concentrate on the toroidal mode as the HSS compresses the dayside magnetosphere resulting in an asymmetric magnetic field topology where toroidal mode waves can interact with energetic electrons. Analysis of the mode structure and wave numbers demonstrates that the generation of the observed ULF waves is a combination of externally driven waves, via the KelvinHelmholtz instability, and internally driven waves, via unstable ion distributions. Further analysis of the periods and toroidal azimuthal wave numbers suggests that these waves can couple with the core electron radiation belt population via the drift resonance during the storm. The azimuthal wave number and structure of ULF wave power (broadband or discrete) have important implications for the inner magnetospheric and radiation belt dynamics.

Murphy, Kyle R.↗

Azimuthal Variation of Instabilities Generated on a Flared Cone by Laser Perturbations

To study the azimuthal development of boundary-layer instabilities, a controlled, laser-generated perturbation was created in the freestream of the Boeing/U.S. Air Force Office of Scientific Research Mach 6 Quiet Tunnel. The freestream perturbation convected downstream in the wind tunnel to interact with a flared-cone model. The flared cone is a body of revolution bounded by a circular arc with a 3 m radius. Pressure transducers were used to measure a wave packet generated in the cone boundary layer by the freestream perturbation. Nine of these sensors formed three stations of azimuthal arrays and were used to determine the azimuthal variation of the wave packets in the boundary layer. The freestream laser-generated perturbation was positioned upstream of the model in three different configurations: along the centerline axis, offset from the centerline axis by 1.5 mm, and offset from the centerline axis by 3.0 mm. When the freestream perturbation was offset from the centerline of a flared cone with a 1.0 mm nose radius, a larger wave packet was generated on the side toward which the perturbation was offset. As a result, transition occurred earlier on that side. The offset perturbation did not have as large of an effect on the boundary layer of a nominally sharp flared cone.

Chou, Amanda↗

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

An existing acoustic analogy formulation is used to make predictions of the turbulent mixing noise from a series of chevron jets tested at NASA Glenn Research Center. Reynolds-averaged Navier-Stokes solutions are used as input to provide the mean flow and turbulence quantities needed to compute the Green’s function and parameterize the source model. The Green’s function for the non-axisymmetric mean flows generated by these nozzles is computed using a second-order finite volume method. A slightly modified version of an existing source model originally developed for round jets is used to assess its capability in these non-axisymmetric flows. Prediction results are compared with experimental data for a range of azimuthal orders of the nozzle geometry and flow speeds. The results show that the RANS-based acoustic analogy prediction method is able to capture the observed azimuthal variation of the sound field fairly well at relatively low jet exit velocities. At higher speeds, the prediction method still captures the observed trends in azimuthal directivity but not the absolute levels, particularly at higher frequencies. Areas for potential improvement of the method are suggested.

Jet Noise↗

Predictions of the Azimuthal Variation of the Noise from Chevron Jets using an Acoustic Analogy

An existing acoustic analogy formulation is used to make predictions of the turbulent mixing noise from a series of chevron jets tested at NASA Glenn Research Center. Reynolds-averaged Navier-Stokes solutions are used as input to provide the mean flow and turbulence quantities needed to compute the Green’s function and parameterize the source model. The Green’s function for the non-axisymmetric mean flows generated by these nozzles is computed using a second-order finite volume method. A slightly modified version of an existing source model originally developed for round jets is used to assess its capability in these non-axisymmetric flows. Prediction results are compared with experimental data for a range of azimuthal orders of the nozzle geometry and flow speeds. The results show that the RANS-based acoustic analogy prediction method is able to capture the observed azimuthal variation of the sound field fairly well at relatively low jet exit velocities. At higher speeds, the prediction method still captures the observed trends in azimuthal directivity but not the absolute levels, particularly at higher frequencies. Areas for potential improvement of the method are suggested.

Jet Noise↗

Two-Phase Azimuthal Instability Generated By A Supersonic Jet Impinging on A Granular Bed

A persistent azimuthal pattern featuring alternate high and low concentration of ejecta emanating from the area where a supersonic jet (Mach 5.3) impinges on a bed of particles in a near-lunar vacuum condition is studied experimentally. Although this peculiar phenomenon has been documented in early studies motivated by extraterrestrial landing, the mechanism of this pattern is not clearly understood. Recently, a series of experiments were conducted at NASA Marshall Space Flight Center inside a 4.5 m vacuum chamber over a range of reduced ambient pressure. Experimental results show vibrant azimuthal patterns, which are clearest at low ambient pressure. The pattern is shown to be driven by the flow instability at low Reynolds number, despite the supersonic jet employed. The flow instability leads to azimuthal vortex lines, which expel ejecta into streaks between two neighboring vortex lines. A simple model is proposed to explain the observed phenomenon.

Plume Surface Interaction↗

Synthetic aperture radar images with composite azimuth resolution

A synthetic aperture radar (SAR) image is produced by using all phase histories of a set of phase histories to produce a first pixel array having a first azimuth resolution, and using less than all phase histories of the set to produce a second pixel array having a second azimuth resolution that is coarser than the first azimuth resolution. The first and second pixel arrays are combined to produce a third pixel array defining a desired SAR image that shows distinct shadows of moving objects while preserving detail in stationary background clutter.

47 OTHER INSTRUMENTATION↗

Azimuthally anisotropic emission of low-momentum direct photons in Au + Au collisions at s N N = 200 GeV

In this paper, the PHENIX experiment at the BNL Relativistic Heavy Ion Collider has measured second- and third-order Fourier coefficients of the azimuthal distributions of direct photons emitted at midrapidity in Au + Au collisions at s N N = 200 GeV for various collision centralities. Combining two different analysis techniques, results were obtained in the transverse momentum range of 0.4 < p T < 4.0 GeV/c. At low p T the second-order coefficients, v 2 , are similar to the ones observed in hadrons. Third-order coefficients, v 3 , are nonzero and almost independent of centrality. These new results on v 2 and v 3 , combined with previously published results on yields, are compared to model calculations that provide yields and asymmetries in the same framework. Finally, those models are challenged to explain simultaneously the observed large yield and large azimuthal anisotropies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Near surface structure of ultrathin epitaxial Ru films on graphene/amorphous SiO 2 revealed by azimuthal RHEED

Ru has been considered as an alternative metallic candidate for future local interconnects. The 2D reciprocal space map constructed from the azimuthal reflection high-energy electron diffraction patterns reveals that ultrathin Ru(0001) is epitaxially grown on transferred graphene on amorphous SiO 2 through quasi-van der Waals interaction. The in-plane and out-of-plane lattice constants are measured from streaks’ separation and intensity modulations along streaks, respectively. Weak and broad rings indicate that a low density of nanoscale polycrystals exist on the surface. In this work, The intensities of 00 and non-00 diffraction spots vs. azimuthal angles in the 2D map show a few degrees out-of-plane and in-plane angular misorientations among grains, respectively. As the film thickness decreases these angular misorientations increase. Transmission electron microscopy carried out in this study also provides precise values of lattice constant and sub-grain sizes in the films. These findings show that ultrathin Ru film is epitaxial but not exactly single crystalline.

36 MATERIALS SCIENCE↗

Scanning ARM Cloud Radar—Advanced—Velocity Azimuth Display Value-Added Product

Spatial distribution of horizontal winds is an important meteorological property to understand mesoscale and cloud scale dynamics of cloud and precipitation systems. The most popular wind measurement is performed by soundings. The sounding observation is generally conducted 1-4 times per day, which may not be enough to observe detailed in-cloud structure. Doppler weather and cloud radars can perform frequent measurements of radial velocities of cloud/precipitation particles in clouds. The weather radar community has historically used the Velocity-Azimuth Display (VAD) technique to retrieve in-cloud wind properties (direction and speed) from radial velocity (e.g., Lhermitte and Atlas, 1961). The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s Ka- and W-band Scanning ARM Cloud Radars (SACRs) collect volume observations of mean Doppler velocity with horizon-to-horizon range height indicator (HSRHI) scans every 30-60 minutes. The SACR ADVanced Velocity-Azimuth Display (SACR-ADV-VAD) Value-Added Product (VAP) extends the VAD technique to cloud radar observations. The VAP provides time series of vertical profiles of in-cloud wind fields at higher temporal and vertical resolutions, which can augment sounding wind measurements.

47 OTHER INSTRUMENTATION↗