Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “anion dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Dynamics of PDMS- g -PDMS Bottlebrush Polymers by Broadband Dielectric Spectroscopy

Poly(dimethylsiloxane) (PDMS)-based bottlebrush polymers, PDMS-g-PDMS, have been synthesized by anionic polymerization in combination with a condensation-based grafting reaction. Bottlebrush polymers show intriguing features, e.g., extremely low viscosities. Hereby, studies of their dynamics are rare. Therefore, we focus on the segmental relaxation by broadband dielectric spectroscopy. An increasing cross-sectional radius proportional to the increasing side chain length has been observed by small-angle neutron scattering over three samples. Here, a comparison of the segmental relaxation times of the bottlebrushes with the respective linear chains reveals slower dynamics in the former. For longer chains, this effect vanishes.

36 MATERIALS SCIENCE↗

High‐Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All‐Solid‐State Batteries

Abstract Superionic solid electrolytes (SEs) are essential for bulk‐type solid‐state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge‐transport properties, however a thorough understanding of how configurational entropy (ΔS conf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen‐rich lithium argyrodites with the general formula Li 5.5 PS 4.5 Cl x Br 1.5‐x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic‐angle spinning nuclear magnetic resonance spectroscopy, the S 2− /Cl − /Br − occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li‐ion dynamics, leading to a room‐temperature ionic conductivity of 22.7 mS cm −1 (9.6 mS cm −1 in cold‐pressed state) for Li 5.5 PS 4.5 Cl 0.8 Br 0.7 (ΔS conf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li 5.5 PS 4.5 Cl 0.8 Br 0.7 SE allowed for stable cycling of single‐crystal LiNi 0.9 Co 0.06 Mn 0.04 O 2 (s‐NCM90) composite cathodes in SSB cells, emphasizing that dual‐substituted lithium argyrodites hold great promise in enabling high‐performance electrochemical energy storage.

Chemistry↗

Hierarchical Ion Interactions in the Direct Air Capture of CO 2 at Air/Aqueous Interfaces

The direct air capture (DAC) of CO 2 using aqueous solvents is plagued by slow kinetics and interfacial barriers that limit effectiveness in combating climate change. Functionalizing air/aqueous surfaces with charged amphiphiles shows promise in accelerating DAC; however, insight into these interfaces and how they evolve in time remains poorly understood. Specifically, competitive ion interactions between DAC reagents and reaction products feedback onto the interfacial structure, thereby modulating interfacial chemical composition and overall function. In this work, we probe the role of glycine amino acid anions (Gly - ), an effective CO 2 capture reagent, that promotes the organization of cationic oligomers at air/aqueous interfaces. These surfaces are probed with vibrational sum frequency generation spectroscopy and molecular dynamics simulations. Our findings demonstrate that the competition for surface sites between Gly - and captured carbonaceous anions (HCO 3 - , CO 3 2 -, carbamates) drives changes in surface hydration, which in turn tunes oligomer ordering. This phenomenon is related to a hierarchical ordering of anions at the surface that are electrostatically attracted to the surface and their ability to compete for interfacial water. These results point to new ways to tune interfaces for DAC via stratification of ions based on relative surface propensities and specific ion effects.

54 ENVIRONMENTAL SCIENCES↗

Anion and Cation Migration at 2D/3D Halide Perovskite Interfaces

Here, this study explores the ionic dynamics in 2D/3Dperovskite solar cells, which are known for their improved efficiency and stability. The focus is on the impact of halide choice in 3D perovskites treated with phenethylammonium halide salts (PEAX, X = Br and I). Our findings reveal that light and heat drive ionic migration in these structures, with PEA + species diffusing into the 3D film in PEABr-treated samples. Mixed-halide 3D perovskites show halide interdiffusion, with bromine migrating to the surface and iodine diffusing into the film. Cathodoluminescence microscopy reveals localized 2Dphases on the 3D perovskite, which become more evenly distributed after thermal treatment. Both PEAX salts enhance the performance of photovoltaic devices. This improvement is attributed to the passivation capabilities of the salts themselves and their respective Ruddlesden–Popper (RP) phases. Annealed PEAI-treated devices show a better balance between efficiency and statistical distribution of photovoltaic parameters.

25 ENERGY STORAGE↗

Hydrogen Bonding Inside Anionic Polymeric Brush Layer: Machine Learning-Driven Exploration of the Relative Roles of the Polymer Steric Effect, Charging, and Type of Screening Counterions

This paper employs a combination of all-atom molecular dynamics (MD) simulations and unsupervised machine learning (ML) for studying the water-water hydrogen bonds (HBs) inside the anionic poly-acrylic acid (PAA) brushes modeled using all-atom MD simulations. PAA brush layer with different charge fraction (f), namely f=0, f=0.25, and f=1, is considered. Water-water interactions, both inside and outside the brush layer, are represented through distinct clusters of tupules of variables representing distances associated with the interacting water molecules. While clusters representing the HBs are present for water inside and outside the brushes, several clusters representing the long-range water-water interactions are missing for the water molecules inside the highly charged (f=1) PAA brushes. More importantly, inside highly charged brushes, the edge of the clusters representing the water-water HBs is progressively shortened, as compared to that in the bulk. Both these results stem from the presence of the PAA brushes imparting the steric effect and the charge effect, or the effect associated with enhanced interactions of water molecules with PE charges and counterions, thereby disrupting the water connectivity. This water-charged-species interaction also increases the water-water HB angle, i.e., makes the water-water HBs less stable inside the highly charged PAA brush layer. The narrowing of the clusters representing the HBs and the alteration of the angle characterizing the HBs confirm that the conditions defining the water-water HBs change inside the PAA brush layer as a function of the charges on the PAA brush layer. Furthermore, we show that the use of the generic definition of HBs, as compared to using our simulation-motivated modified definition of water-water HBs, overpredict the number of water-water HBs inside the PAA brush layer. Finally, we employ this all-atom-MD-ML framework to quantify the effect of other types of screening counterions (Li + , Ca 2+ , and Y 3+ ions) in determining the water-water interactions and water-water HB properties inside the PAA brush layer. Furthermore, the findings of the present study, confirming the weakening of water-water HBs inside the PAA brush layer, points to the possibility that the water molecules will be more available for hydrating the brush layer and counterions, thereby leading to a more pronounced wetting of the PAA brush layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cooperative Effects Associated with High Electrolyte Concentrations in Driving the Conversion of CO2 to C2H4 on Copper

Compared to a conventional electrolyte concentration of 1 M HCOOK, the use of a highly concentrated 7.1 M HCOOK electrolyte increases the Faradaic efficiency (FE) ratio of C2H4/CO from 2.2 +- 0.3 to 18.3 +- 4.8 at -1.08 V vs. reversible hydrogen electrode (RHE) on a Cu gas-diffusion electrode. Based on electrochemical analysis and ab initio molecular dynamics (AIMD) simulation, the identity and concentration of the cation and anion play more important roles in controlling the CO2R reaction pathway than the bulk CO2 solubility and the bulk pH of electrolytes. In situ attenuated reflectance surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that, unlike 1 M HCOOK, the *CO-bridge-binding mode on Cu is dominant in 7.1 M HCOOK electrolyte, which potentially results in less CO release and higher yield of C2H4. This study demonstrates that although we can tailor the electrolyte composition to shift product selectivity, the factors that control the product selectivity are numerous and cannot be distilled down into one correlated property-reactivity relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

dynamics of organic-mineral interactions at the metal oxide-solution interface as studied via binding energetics (Final report)

This project focused on addressing longstanding fundamental and experimental uncertainties on how dissolved organic substances (DOS) interact with metal oxide surface under environmentally relevant conditions. By leveraging a custom-built real-time, in-tandem flow adsorption microcalorimetry-UV-Vis/fluorescence spectroscopy platform, we characterized the binding energetics, kinetics and mechanistic pathways driving DOS-metal oxide interactions at temporal resolution on the order of 1-5 seconds. We studied a diverse suite of model organic compounds/substances – including monocarboxylates (e.g. acetate and benzoate), di-carboxylates (oxalate and succinate), amino acids, amino-based nanparticles and natural organic matter – interacting at the mineral-water interface of structurally- and/or chemically distinct metal oxides (including SiO2, boehmite, ferrihydrite, and γ-Al2O3). Our results indicated that DOS-metal oxide interactions are governed by multi-step reaction pathways, often switching between distinct, resolvable enthalpy- and entropy-driven non-electrostatic or electrostatic configurations. To quantify these interactions, we developed and implemented an analytical workflow that integrates peak deconvolution and Monte-Carlo based error propagation to determine site-specific thermodynamic and kinetic parameters for individual binding/debinding events. In addition to resolving apparent first-order rate constants of each event, we were able to quantify associated apparent equilibrium constants as well as free energy, enthalpy and entropy contribution to the activation and subsequent progression of the binding/debinding process across compounds, compound class and metal oxide surfaces. The kinetic-thermodynamic data produced in this study captured how the interplay between oxide surface reactivity and DOS molecular structure jointly drives binding-debinding dynamics. Notably, that at pH below PZC of the oxide surface, neutral species were heavily involved in monocarboxylate binding, while anionic species drove dicarboxylate binding. Also, that among amino acids 1) positional isomers show distinctive binding characteristics to each other while enantiomers show no significant differences in binding characteristics, 2) molecules that bind via outer-sphere complexation show a larger entropic shift between binding and debinding with no impact on oxide surface while 3) inner-sphere interactions increased anion exchange capacity of the oxide surface. The new insights and data from this work has great potential for improving predictive modeling of carbon dynamics and specifically organic-mineral interactions in environmental and industrial systems.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗

Cooperative and inhibitory ion transport in functionalized angstrom-scale two-dimensional channels

Significant success has been achieved in fabricating angstrom-scale artificial solid ionic channels aiming to replicate the biological ion channels (BICs). Besides high selectivity, BICs also exhibit sophisticated ion gating and interplay. However, such behavior and functionality are seldomly recreated in the artificial counterparts due to the insufficient understanding of the molecular origin. Here we report cooperative and inhibitory ion transport in angstrom-scale acetate functionalized MoS 2 two-dimensional channels. For cooperative ion transport, the permeability of K + is doubled in the presence of only 1% Pb 2+ (versus K + by molarity), while the permeability of Pb 2+ is independent of K + . Molecular dynamics simulations reveal complex interplay among K + , Pb 2+ , and the anions in governing the cooperativity, such that Pb 2+ ions capture and slow down the anions via long-range interaction, which leads to the synchronization of anions with K + to transport as ion pairs with reduced interaction with the channel surface. For inhibitory ion transport, divalent Co 2+ (or Ba 2+ ) and Pb 2+ can replace each other in the confined channel and compete for the limited transport cross section. Our work reveals ion transport phenomena in extreme confinement and highlights the potential of manipulating ion interplay in confinement for achieving advanced functionalities.

Functionalized Angstrom↗

Insights into the Water Transport Mechanism in Polymeric Membranes from Neutron Scattering

Polymeric membranes are ubiquitous in transport applications including gas separation, water desalination, solid-state batteries, and fuel cells. The transport mechanism in certain classes of membranes is well understood. It is generally believed that polymeric membranes used in gas separation follow the solution-diffusion model. However, the transport mechanism in other membranes such as the ones used in water desalination is less clear as both the solution-diffusion and hydrodynamic models have been proposed. In this contribution, we study the structure as well as the water and polymer dynamics of several polymeric membranes using small-angle and quasi-elastic neutron scattering. We demonstrate that on the scale of a few nanometers, water appears to diffuse through a desalination membrane at a rate comparable to bulk water, while water diffuses at a rate that is a factor of 2 slower in an anion-exchange membrane. These results illustrate the importance of studying both the structure and dynamics of membrane materials and have important implications in understanding the transport mechanisms that differentiate the different types of polymeric membranes.

36 MATERIALS SCIENCE↗

Ion and Water Dynamics in the Transition from Dry to Wet Conditions in Salt-Doped PEG

The influence of the water content on ion and water transport mechanisms in polymer membranes under low to moderate hydration conditions remains poorly understood. In this study, we combine ion and water diffusivity (PFG-NMR) measurements with atomistic molecular dynamics simulations to better understand transport processes in hydrated salt-doped poly(ethylene glycol). Above the water percolation threshold, the experimental and simulated diffusivities are in good agreement with the free volume transport models. At low hydration levels, unlike dry systems, ion diffusion cannot be described by polymer segmental dynamics alone. We rationalize such observations by the interplay between ion–water and ion–polymer solvation of cations and between ion–water and cation–anion interactions for anions. Further, we demonstrate that a two-state model combining ion–water solvation and free volume transport can describe water dynamics across the entire hydration range of interest. Here, our findings provide a more encompassing analysis of ion and water transport in hydrated polyelectrolytes, specifically in the low hydration regime.

36 MATERIALS SCIENCE↗

Temperature Dependent Local Atomic Structure and Vibrational Dynamics of Barium Hydride and Calcium Hydride

Solid-state ionic conductors that exhibit pure ionic transport of hydride anions are rare. Here, we investigate two alkaline earth metal hydrides, barium hydride and calcium hydride, using neutron scattering techniques to understand how the local atomic environment plays a role in the diffusion of hydride ions. At high temperatures, barium hydride exhibits exceptional transport properties with ionic conductivities that are higher than those of many of the typical proton and oxide ion conductors in use today. Total neutron scattering and pair distribution function analysis reveal how a structural phase transition converts barium hydride from a modest ionic conductor into a fast ionic conductor through the introduction of disorder, deuterium site splitting, and dynamic structural fluctuations. Furthermore, neutron vibrational spectroscopy is employed to probe changes in the temperature evolution of the lattice dynamics and local energy landscape. These results improve our fundamental knowledge of the interplay between structure and dynamics governing a rare conduction process of hydride ions in solid-state materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and Dynamics in Hydroxide-Conducting Polysulfones

In alkaline zinc–manganese dioxide batteries, there is a need for selective polymeric separators that have good hydroxide ion conductivity but that prevent the transport of zincate (Zn(OH) 4 ) 2- . Here we investigate the nanoscale structure and hydroxide transport in two cationic polysulfones that are promising for these separators. We present the synthesis and characterization for a tetraethylammonium-functionalized polysulfone (TEA-PSU) and compare it to our previous work on an N-butylimidazolium-functionalized polysulfone (NBI-PSU). We perform atomistic molecular dynamics (MD) simulations of both polymers at experimentally relevant water contents. The MD simulations show that both polymers develop well phase separated nanoscale water domains that percolate through the polymer. Calculation of the total scattering intensity from the MD simulations reveal weak or nonexistent ionomer peaks at low wave vectors. The lack of an ionomer peak is due to a loss of contrast in the scattering. The small water domains in both polymers, with median diameters on the order of 0.5–0.7 nm, lead to hydroxide and water diffusion constants that are 1–2 orders of magnitude smaller than their values in bulk water. This confinement lowers the conductivity but also may explain the strong exclusion of zincate from the PSU membranes seen experimentally.

25 ENERGY STORAGE↗

Water, Ion, and Proton Dynamics and Interactions in Nanoconfined Systems

The research was directed at understanding the role that nanoconfinement has on the dynamics and structure of liquids confined in nanometer size structures. Experiments were conducted using ultrafast infrared methods. The methods were two dimensional infrared (2D IR) spectroscopy and polarization pump-probe (PSPP) experiments. In addition FT-IR spectroscopy was used. To augment the experimental work, high level molecular dynamics simulations of the systems were conducted. The system used for confinement were nanoporous silica with essentially monodispersed pores. Pores of different diameters were studies, i.e., 2.5 nm to 8 nm. Water and organic liquids were investigated. The experiments were performed on a vibrational probe molecule, i.e., the CN stretch of the anion SeCN-. The 2D IR experiments measured spectral diffusion, which directly reported on the structural dynamics of the confined liquids. 2D IR was also used to perform chemical exchange measurements, which observed the formation and dissociation of molecular complexes with surface silanols. The PSPP experiments measured orientational relaxation of the probe molecule as well as it vibrational lifetime. All of the observables depended on the diameter of the pores and the type of liquid. The simulations of the observables provided detailed structural information on the structure of the confined liquids and there interactions with the surfaces. In addition to the study of the confinement in nanopores, water in hydrogels was also studied. The same experimental methods were used along with MD simulations. It was found the influence of hydrogels on water did not come from confinement of the water in the hydrogel polymer network, but rather from the interactions of the water with the individual monomers that compose the polymer. In addition, the temperature dependence of a polymer/water system was tracked from below to above the lower critical solution temperature to observe the nature of the phase separated polymer and how water responded to the phase separation.

36 MATERIALS SCIENCE↗

Mechanisms of activation and desensitization of full-length glycine receptor in lipid nanodiscs

Glycinergic synapses play a central role in motor control and pain processing in the central nervous system. Glycine receptors (GlyRs) are key players in mediating fast inhibitory neurotransmission at these synapses. While previous high-resolution structures have provided insights into the molecular architecture of GlyR, several mechanistic questions pertaining to channel function are still unanswered. Here, we present Cryo-EM structures of the full-length GlyR protein complex reconstituted into lipid nanodiscs that are captured in the unliganded (closed), glycine-bound (open and desensitized), and allosteric modulator-bound conformations. A comparison of these states reveals global conformational changes underlying GlyR channel gating and modulation. The functional state assignments were validated by molecular dynamics simulations, and the observed permeation events are in agreement with the anion selectivity and conductance of GlyR. These studies provide the structural basis for gating, ion selectivity, and single-channel conductance properties of GlyR in a lipid environment.

59 BASIC BIOLOGICAL SCIENCES↗

Nanoscale structure of a hybrid aqueous–nonaqueous electrolyte

A new class of electrolytes have been reported, hybridizing aqueous with non-aqueous solvents, which combines non-flammability and non-toxicity characteristics of aqueous electrolytes with the superior electrochemical stability of non-aqueous systems. Here, we report measurements of the structure of an electrolyte composed of an equal-mass mixture of 21 m LiTFSI-water and 9 m LiTFSI-dimethyl carbonate using high-energy x-ray diffraction and polarized neutron diffraction with isotope substitution. Neutron structure factors from partially and fully deuterated samples exhibit peaks at low scattering vector Q that we ascribe to long-range correlations involving both solvent molecules and TFSI − anions. Here we compare both sets of measurements with results of molecular dynamics simulations based on a polarizable force field. The structures derived from simulations are generally in agreement with those measured, except that neutron structure factors predicted for two partially deuterated samples show very intense scattering increasing up to the low- Q limit of simulation, indicating a partial segregation between the two solvents not observed in experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Ion Transport in Li 3‐3y Ho 1+y Cl 6‐x Br x via Transition‐Metal Free Structural Planes and Charge Carrier Distribution

Abstract Localized atomistic disorder in halide‐based solid electrolytes (SEs) can be leveraged to boost Li + mobility. In this study, Li + transport in structurally modified Li 3 HoCl 6 , via Br − introduction and Li + deficiency, is explored. The optimized Li 3‐3 y Ho 1+ y Cl 6‐ x Br x achieves an ionic conductivity of 3.8 mS cm −1 at 25 °C, the highest reported for holmium halide materials. 6,7 Li nuclear magnetic resonance and relaxometry investigations unveil enhanced ion dynamics with bromination, attaining a Li + motional rate neighboring 116 MHz. X‐ray diffraction analyses reveal mixed‐anion‐induced phase transitions with disproportionate octahedral expansions and distortions, creating Ho‐free planes with favorable energetics for Li + migration. Bond valence site energy analysis highlights preferred Li + transport pathways, particularly in structural planes devoid of Ho 3+ blocking effects. Molecular dynamics simulations corroborate enhanced Li + diffusion with Br − introduction into Li 3 HoCl 6 . Li‐Ho electrostatic repulsions in the (001) plane presumably drive Li + diffusion into the Ho‐free (002) layer, enabling rapid intraplanar Li + motion and exchange between the 2d and 4h sites. Li 3‐3 y Ho 1+ y Cl 6‐ x Br x also demonstrates good battery cycling stability. These findings offer valuable insights into the intricate correlations between structure and ion transport and will help guide the design of high‐performance fast ion conductors for all‐solid‐state batteries.

Chemistry↗

Specific Ion Solvation and Pairing Effects in Glycerol Carbonate

Identifying the driving forces behind the solvation of inorganic salts by nonaqueous solvents is an important step in the development of green solvents. Here we focus on one promising solvent: glycerol carbonate (GC). Using ab initio molecular dynamics simulations, we build upon our previous work by detailing glycerol carbonate’s interactions with a series of anions, a lithium ion, and the LiF ion pair. Through these investigations, we highlight the changes in solvation behavior as the anion size increases, the competition of binding shown by lithium for the oxygens of GC, and the behavior of the LiF ion pair in a GC solution. These results in this work indicate the importance of the cation’s identity in ion-pairing structure and dynamics and lend insight into the key factors behind the specific ion effects seen in GC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗