Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “allocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Target allocation yields for massively multiplexed spectroscopic surveys with fibers

We present Simulated Annealing fiber-to-target allocation simulations for the proposed DESI and 4MOST massively multiplexed spectroscopic surveys, and for both Poisson and realistically clustered mock target samples. We simulate both Echidna and theta-phi actuator designs, including the restrictions caused by the physical actuator characteristics during repositioning. For DESI, with theta-phi actuators, used in 5 passes over the sky for a mock ELG/LRG/QSO sample, with matched fiber and target densities, a total target allocation yield of 89.3% was achieved, but only 83.7% for the high-priority Ly-alpha QSOs. If Echidna actuators are used with the same pitch and number of passes, the yield increases by 5.7% and 16% respectively. Echidna also allows a factor-of-two increase in the number of close Ly-alpha QSO pairs that can be observed. Echidna spine tilt causes a variable loss of throughput, with average loss being the same as the loss at the rms tilt. With a natural tilt minimization scheme, we find an rms tilt always close to 0.58 x maximum. There is an additional but much smaller defocus loss, equivalent to an average defocus of 30microns. These tilt losses offset the gains in yield for Echidna, but because the survey strategy is driven by the higher priority targets, a clear survey speed advantage remains. For 4MOST, high and low latitude sample mock catalogs were supplied by the 4MOST team, and allocations were carried out with the proposed Echidna-based positioner geometry. At high latitudes, the resulting target completeness was 85.3% for LR targets and 78.9% for HR targets. At low latitude, the target completeness was 93.9% for LR targets and 71.2% for HR targets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Homogenizing OSG and XSEDE: Providing Access to XSEDE Allocations through OSG Infrastructure

We present a system that allows individual researchers and virtual organizations (VOs) to access allocations on Stampede2 and Bridges through the Open Science Grid (OSG), a national grid infrastructure for running high throughput computing (HTC) tasks. Using this system, VOs and researchers are able to run larger workflows than can be done with OSG resources alone. This system allows a VO or user to run on XSEDE resources (with their allocation) using the same framework used with OSG resources. The system consists of two parts: the compute element (CE) that routes workloads to the appropriate user accounts and allocation on XSEDE resources, and simulated access to the CernVM Filesystem (CVMFS) servers used by OSG and VOs to distribute software and data. This allows jobs submitted through this system to work on a homogeneous environment regardless of whether they run on XSEDE HPC resources (like Stampede2 and Bridges) or OSG.

Thapa, Thapa,Suchandra↗

MAPA: Multi-Accelerator Pattern Allocation Policy for Multi-Tenant GPU Servers

Multi-accelerator servers are increasingly being deployed in shared multi-tenant environments (such as in cloud data centers) in order to meet the demands of large-scale compute-intensive workloads. In addition, these accelerators are increasingly being inter-connected in complex topologies and workloads are exhibiting a wider variety of inter-accelerator communication patterns. However, existing al-location policies are ill-suited for these emerging use-cases. Specifically, this work identifies that multi-accelerator workloads are commonly fragmented leading to reduced bandwidth and increased latency for inter-accelerator communication. We propose Multi-Accelerator Pattern Allocation (MAPA), a graph pattern mining approach towards providing generalized allocation support for allocating multi-accelerator workloads on multi-accelerator servers. We demonstrate that MAPA is able to improve the execution time of multi-accelerator workloads and that MAPA is able to provide generalized benefits across various accelerator topologies. Finally, we demonstrate a speedup of 12.4% for75th percentile of jobs with the worst case execution time reduced by up to 35% against baseline policy using MAPA.

Ranganath, Kiran↗

Meta Allocator

Metall provides simplified memory allocation interfaces for out-of-core applications that use block-addressable persistent memory devices to extend the capacity of main memory and to persistently store data on such devices. Using Metall, users can dynamically allocate memory in persistent memory devices just as in main-memory. In order to store data persistently and reload the data easily, Metall also provides a key-value store like interface. Metall offers APIs to allocate contiguous memory regions like malloc(3) does and to construct C++ objects, including STL-like containers. Metall has a similar APIs to Boost.Interprocess (BIP).

Iwabuchi, Keita↗

An Integrated Tool for Functional Requirements Analysis, Function Allocation and Task Analysis

The software application is called "HFE-Trace". This is an integrated method and tool for the management of Human Factors Engineering analyses and related data. Its primary purpose is to support the coherent and consistent application of the nuclear industry's best practices for human factors engineering work. The software is a custom Microsoft® Access® application. The application is used (in conjunction with other tools such as spreadsheets, checklists and normal documents where necessary) to collect data on the design of a new nuclear power plant from subject matter experts and other sources. This information is then used to identify potential system and functional breakdowns of the intended power plant design. This information is expanded by developing extensive descriptions of all functions, as well as system performance parameters, operating limits and constraints, and operational conditions. Once these have been verified, the human factors elements are added to each function, including intended operator role, function allocation considerations, prohibited actions, primary task categories, and primary work station. In addition, the application includes a computational method to assess a number of factors such as system and process complexity, workload, environmental conditions, procedures, regulations, etc.) that may shape operator performance. This is a unique methodology based upon principles described in NUREG/CR-3331 ("A methodology for allocating nuclear power plant control functions to human or automatic control") and it results in a semi-quantified allocation of functions to three or more levels of automation for a conceptual automation system. The aggregate of all this information is then linked to the Task Analysis section of the application where the existing information on all operator functions is transformed into task information and ultimately into design requirements for Human-System Interfaces and Control Rooms. This final step includes assessment of methods to prevent potential operator errors.

Hugo, Jacques↗

Simulated Land Allocation, Nitrogen Use, and Nitrogen Loss in the Mississippi Atchafalaya River Basin for Various RFS2 (Renewable Fuel Standard) Policy Scenarios

Total nitrogen leaching rates were calculated over the Mississippi Atchafalaya River Basin (MARB) using an integrated economic-biophysical modeling approach. Land allocation for corn production and total nitrogen application rates were calculated for crop reporting districts using the Biofuel and Environmental Policy Analysis Model (BEPAM) for 5 RFS2 policy scenarios. These were used as input in the Integrated BIosphere Simulator-Agricultural Version (Agro-IBIS) and the Terrestrial Hydrologic Model with Biogeochemistry (THMB) to calculate the nitrogen loss. Land allocation and total nitrogen application simulations were simulated for the period 2016-2030 for 303 crop reporting districts (https://www.nass.usda.gov/Data_and_Statistics/County_Data_Files/Frequently_Asked_Questions/county_list.txt). The final 2030 values are reported here. Both are stored in csv files. Units for land allocation are million ha and nitrogen application are million kg. The nitrogen leaching rates were modeled with a spatial resolution of 5' x 5' using the North American Datum of 1983 projection and stored in NetCDF files. The 30-year average is calculated over the last 30 years of the 45 years being simulated. Leaching rates are calculated in kg-N/ha.

bioenergy crops↗

Biomass Resource Allocation among Competing End Uses

The Biomass Scenario Model (BSM) is a system dynamics model developed by the U.S. Department of Energy as a tool to better understand the interaction of complex policies and their potential effects on the biofuels industry in the United States. However, it does not currently have the capability to account for allocation of biomass resources among the various end uses, which limits its utilizationin analysis of policies that target biomass uses outside the biofuels industry. This report provides a more holistic understanding of the dynamics surrounding the allocation of biomass among uses that include traditional use, wood pellet exports, bio-based products and bioproducts, biopower, and biofuels by (1) highlighting the methods used in existing models' treatments of competition forbiomass resources; (2) identifying coverage and gaps in industry data regarding the competing end uses; and (3) exploring options for developing models of biomass allocation that could be integrated with the BSM to actively exchange and incorporate relevant information.

09 BIOMASS FUELS↗

Task mapping for non-contiguous allocations.

This paper examines task mapping algorithms for non-contiguously allocated parallel jobs. Several studies have shown that task placement affects job running time for both contiguously and non-contiguously allocated jobs. Traditionally, work on task mapping either uses a very general model where the job has an arbitrary communication pattern or assumes that jobs are allocated contiguously, making them completely isolated from each other. A middle ground between these two cases is the mapping problem for non-contiguous jobs having a specific communication pattern. We propose several task mapping algorithms for jobs with a stencil communication pattern and evaluate them using experiments and simulations. Our strategies improve the running time of a MiniApp by as much as 30% over a baseline strategy. Furthermore, this improvement increases markedly with the job size, demonstrating the importance of task mapping as systems grow toward exascale.

Leung, Vitus Joseph↗

Transmission Cost Allocation Practices

This technical brief summarizes approaches to allocating costs of transmission facilities between generators and loads, jurisdictions, and customer classes, and based on project drivers. The brief also discusses planning approaches, stakeholder engagement, considerations for using counterfactuals for cost allocation, and Federal Energy Regulatory Commission and court decisions on cost allocation proposals.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Collaborative Geodesign and Spatial Optimization for Fragmentation-Free Land Allocation

Demand for agricultural food production is projected to increase dramatically in the coming decades, putting at risk our clean water supply and prospects for sustainable development. Fragmentation-free land allocation (FF-LA) aims to improve returns on ecosystem services by determining both space partitioning of a study area and choice of land-use/land-cover management practice (LMP) for each partition under a budget constraint. In the context of large-scale industrialized food production, fragmentation (e.g., tiny LMP patches) discourages the use of modern farm equipment (e.g., 10- to 20-m-wide combine harvesters) and must be avoided in the allocation. FF-LA is a computationally challenging NP-hard problem. We introduce three frameworks for land allocation planning, namely collaborative geodesign, spatial optimization and a hybrid model of the two, to help stakeholders resolve the dilemma between increasing food production capacity and improving water quality. A detailed case study is carried out at the Seven Mile Creek watershed in the midwestern US. The results show the challenges of generating near-optimal solutions through collaborative geodesign, and the potential benefits of spatial optimization in assisting the decision-making process.

Xie, Yiqun↗

Optimum allocation of redundancy among subsystems connected in series

This analysis considers the optimum allocation of redundancy in a system of serially connected subsystems in which each subsystem is of the k-out-of-n type. Redundancy is optimally allocated when: (1) reliability is maximized for given costs; or (2) costs are minimized for given reliability. Several techniques are presented for achieving optimum allocation and their relative merits are discussed. Approximate solutions in closed form were attainable only for the special case of series-parallel systems and the efficacy of these approximations is discussed.

Bien, D. D.↗

Spacelab task allocation - A preliminary determination of onboard versus ground operational priorities

A three-phase approach was developed for allocating specific mission tasks to the onboard crew or the ground support team in the Spacelab project. Phase one involved a list of potential operational tasks anticipated for Spacelab missions, phase two, the development of a set of criteria for allocating task-performance location, phase three, the combination of these criteria to allow tasks to be arranged in order of priority. The task-allocation criteria included crew safety, work load, cost, efficiency, weight/space, accessibility, complexity, response time, and capability.

Harris, W. J.↗

Linear modelling of attentional resource allocation

Eight subjects time-shared performance of two compensatory tracking tasks under conditions when both were of constant difficulty, and when the control order of one task (designated primary) was varied over time within a trial. On line performance feedback was presented on half of the trials. The data are interpreted in terms of a linear model of the operator's attention allocation system, and suggest that this allocation is strongly suboptimal. Furthermore, the limitations in reallocating attentional resources between tasks, in response to difficulty fluctuations were not reduced by augmented performance feedback. Some characteristics of the allocation system are described, and reasons for its limitations suggested.

Pierce, B.↗

Manpower Allocation and Reporting

Interactive Manpower Allocation and Reporting System (MARS) helps planners make manpower allocation decisions. Includes provisions to enter overall constraints for projects and persons, assign individuals to projects, compute automatically overhead category, report on deviations from constraints, and generate manpower resource allocation reports.

Merwarth, P. D.↗

Ka-band (32 GHz) allocations for deep space

At the 1979 World Administrative Conference, two new bands were allocated for deep space telecommunications: 31.8 to 32.3 GHz, space-to-Earth, and 34.2 to 34.7 GHz, Earth-to-space. These bands provide opportunity for further development of the Deep Space Network and its support of deep space research. The history of the process by which JPL/NASA developed the rationale, technical background, and statement of requirement for the bands are discussed. Based on this work, United States proposals to the conference included the bands, and subsequent U.S. and NASA participation in the conference led to successful allocations for deep space telecommunications in the 30 GHz region of the spectrum. A detailed description of the allocations is included.

Degroot, N. F.↗

Space Network Control Conference on Resource Allocation Concepts and Approaches

The results are presented of the Space Network Control (SNC) Conference. In the late 1990s, when the Advanced Tracking and Data Relay Satellite System is operational, Space Network communication services will be supported and controlled by the SNC. The goals of the conference were to survey existing resource allocation concepts and approaches, to identify solutions applicable to the Space Network, and to identify avenues of study in support of the SNC development. The conference was divided into three sessions: (1) Concepts for Space Network Allocation; (2) SNC and User Payload Operations Control Center (POCC) Human-Computer Interface Concepts; and (3) Resource Allocation Tools, Technology, and Algorithms. Key recommendations addressed approaches to achieving higher levels of automation in the scheduling process.

Moe, Karen L.↗

Space Network Control (SNC) Conference on Resource Allocation Concepts and Approaches. Overview

In session 1 of the conference, Concepts for space network resource allocation was the main topic. In session 2, Space Network Control and user payload operations and control center human-computer interface, was the topic of discussion. The topic of session 3 was Resource allocation tools, technology, and algorithms. Some of the stated goals for the conference are as follows: to survey existing resource allocation concepts and approaches; to identify solutions applicable to the SN problem; to identify fruitful avenues of study in support of SNC development; and to capture knowledge in proceedings and make available to bidders on the SNC concept definition procurement.

Source record↗

An exploration of function analysis and function allocation in the commercial flight domain

The applicability is explored of functional analysis methods to support cockpit design. Specifically, alternative techniques are studied for ensuring an effective division of responsibility between the flight crew and automation. A functional decomposition is performed of the commercial flight domain to provide the information necessary to support allocation decisions and demonstrate methodology for allocating functions to flight crew or to automation. The function analysis employed 'bottom up' and 'top down' analyses and demonstrated the comparability of identified functions, using the 'lift off' segment of the 'take off' phase as a test case. The normal flight mission and selected contingencies were addressed. Two alternative methods for using the functional description in the allocation of functions between man and machine were investigated. The two methods were compared in order to ascertain their relative strengths and weaknesses. Finally, conclusions were drawn regarding the practical utility of function analysis methods.

Mcguire, James C.↗