Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active space selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Space Suit Electrocardiographic Electrode Selection: Are commercial electrodes better than the old Apollo technology?

The NASA Manned Space Program uses an electrocardiograph (ECG) system to monitor astronauts during extravehicular activity (EVA). This ECG system, called the Operational Bioinstrumentation System (OBS), was developed during the Apollo era. Throughout the Shuttle program these electrodes experienced failures during several EVAs performed from the Space Shuttle and International Space Station (ISS) airlocks. An attempt during Shuttle Flight STS-109 to replace the old electrodes with new commercial off-the-shelf (COTS) disposable electrodes proved unsuccessful. One assumption for failure of the STS-109 COTS electrodes was the expansion of trapped gases under the foam electrode pad, causing the electrode to be displaced from the skin. Given that our current electrodes provide insufficient reliability, a number of COTS ECG electrodes were tested at the NASA Altitude Manned Chamber Test Facility. Methods: OBS disposable electrodes were tested on human test subjects in an altitude chamber simulating an Extravehicular Mobility Unit (EMU) operating pressure of 4.3 psia with the following goals: (1) to confirm the root cause of the flight certified, disposable electrode failure during flight STS-109. (2) to identify an adequate COTS replacement electrode and determine if further modifications to the electrodes are required. (3) to evaluate the adhesion of each disposable electrode without preparation of the skin with isopropyl alcohol. Results: There were several electrodes that failed the pressure testing at 4.3psia, including the electrodes used during flight STS-109. Two electrodes functioned well throughout all testing and were selected for further testing in an EMU at altitude. A vent hole placed in all electrodes was also tested as a possible solution to prevent gas expansion from causing electrode failures. Conclusions: Two failure modes were identified: (1) foam-based porous electrodes entrapped air bubbles under the pad (2) poor adhesion caused some electrodes to fail

Redmond, M.↗
NASA NTRS1998

The use of in-flight foot pressure as a countermeasure to neuromuscular degradation

The purpose of this study was to determine whether applying foot pressure to unrestrained subjects during space flight could enhance the neuromuscular activation associated with rapid arm movements. Four men performed unilateral arm raises while wearing--or not wearing--specially designed boots during a 81- or 115-day space flight. Arm acceleration and surface EMG were obtained from selected lower limb and trunk muscles. Pearson r coefficients were used to evaluate similarity in phasic patterns between the two in-flight conditions. In-flight data also were magnitude normalized to the mean voltage value of the muscle activation waveforms obtained during the no-foot-pressure condition to facilitate comparison of activation amplitude between the two in-flight conditions. Foot pressure enhanced neuromuscular activation and somewhat modified the phasic features of the neuromuscular activation during the arm raises.

Mir Project↗
DOE OSTI2025

Operando XAS and DFT Uncover Structure-Performance Relationships in Re/TiO 2 for Selective CO 2 Hydrogenation to Methanol

The conversion of CO 2 into value-added chemicals, such as methanol, offers a promising pathway toward a renewable energy future. However, a precise kinetic control and a highly selective catalyst are necessary to overcome the thermodynamic preference for CO 2 hydrogenation to methane. Rhenium-based catalysts, particularly Re/TiO 2 , demonstrate high activity and selectivity for methanol under high-pressure conditions. For example, at 100 bar and 200 °C, a methanol selectivity of 97−99% was obtained. Catalysts with 1 wt % Re and 5 wt % Re/ TiO 2 were used to study the effect of cluster sizes. At 250 °C, the 1 wt % catalyst achieves 97% selectivity at 23% conversion, whereas 5 wt % Re/TiO 2 achieves 74% selectivity at 40% conversion, corresponding to a drop in space-time yield from 65 to 16 g CH 3 OH ·g Re −1 ·h −1 , respectively. X-ray absorption spectroscopy provided insights into the structure of the active sites, while density functional theory calculations revealed the effects of cluster size on the energy barriers for H 2 activation, CH 3 OH dissociation, and CH 3 OH desorption, all of which directly influence conversion and selectivity. These results underscore the importance of balancing cluster size for optimal catalyst performance and provide insights into the design of efficient and selective catalysts for renewable methanol production.

XAS↗
NASA NTRS1987

Laboratory testing of candidate robotic applications for space

Robots have potential for increasing the value of man's presence in space. Some categories with potential benefit are: (1) performing extravehicular tasks like satellite and station servicing, (2) supporting the science mission of the station by manipulating experiment tasks, and (3) performing intravehicular activities which would be boring, tedious, exacting, or otherwise unpleasant for astronauts. An important issue in space robotics is selection of an appropriate level of autonomy. In broad terms three levels of autonomy can be defined: (1) teleoperated - an operator explicitly controls robot movement; (2) telerobotic - an operator controls the robot directly, but by high-level commands, without, for example, detailed control of trajectories; and (3) autonomous - an operator supplies a single high-level command, the robot does all necessary task sequencing and planning to satisfy the command. Researchers chose three projects for their exploration of technology and implementation issues in space robots, one each of the three application areas, each with a different level of autonomy. The projects were: (1) satellite servicing - teleoperated; (2) laboratory assistant - telerobotic; and (3) on-orbit inventory manager - autonomous. These projects are described and some results of testing are summarized.

Purves, R. B.↗
NASA NTRS2004

Exploring the Unknown

One of the most important developments of the twentieth century has been the movement of humanity into space with machines and people. The extension of human activity into outer space has been accompanied by a high degree of self-awareness of its historical significance. Because most of the activity in outer space was carried out under government sponsorship, it was accompanied by the documentary record required of public institutions, and there has been a spate of official and privately written histories of most major aspects of space achievement to date. When top leaders considered what course of action to pursue in space, their deliberations and decisions often were carefully put on the record. There is, accordingly, no lack of material for those who aspire to understand the origins and evolution of U.S. space policies and programs.This reality forms the rationale for this series. Precisely because there is so much historical material available on space matters, the National Aeronautics and Space Administration (NASA) decided in 1988 that it would be extremely useful to have easily available to scholars and the interested public a selective collection of many of the seminal documents related to the evolution of the U.S. civilian space program. While recognizing that much space activity has taken place under the sponsorship of the Department of Defense and other national security organizations, the U.S. private sector, and in other countries around the world, NASA felt that there would be lasting value in a collection of documentary material primarily focused on the evolution of the U.S. government s civilian space program, most of which has been carried out since 1958 under the Agency s auspices. As a result, the NASA History Office contracted with the Space Policy Institute of George Washington University's Elliott School of International Affairs to prepare such a collection. This is the sixth volume in the documentary history series; two additional ones containing documents and introductory essays related to human space flight, including microgravity research in Earth orbit, will follow. The documents collected during this research project were assembled from a diverse number of both public and private sources. A major repository of primary source materials relative to the history of the civil space program is the NASA Historical Reference Collection of the NASA History Office located at the Agency s Headquarters in Washington, DC.

Logsdon, John M.↗
DOE OSTI2021

Evaluating the benefits of kinetic Monte Carlo and microkinetic modeling for catalyst design studies in the presence of lateral interactions

Popular computational catalyst design strategies rely on the identification of reactivity descriptors, which can be used along with Brønsted–Evans–Polanyi (BEP) and scaling relations as input to a microkinetic model (MKM) to make predictions for activity or selectivity trends. The main benefit of this approach is related to the inherent dimensionality reduction of the large material space to just a few catalyst descriptors. Conversely, it is well documented that a small set of descriptors is insufficient to capture the intricacies and complexities of a real catalytic system. The inclusion of coverage effects through lateral adsorbate-adsorbate interactions can narrow the gap between simplified descriptor predictions and real systems, but mean-field MKMs cannot properly account for local coverage effects. This shortcoming of the mean-field approximation can be rectified by switching to a lattice-based kinetic Monte Carlo (kMC) method using cluster expansion representation of adsorbate–adsorbate lateral interactions. Using the prototypical CO oxidation reaction as an example, we critically evaluate the benefits of kMC over MKM in terms of trend predictions and computational cost when using only a small set of input parameters. After confirming that in the absence of lateral interactions the kMC and MKM approaches yield identical trends and mechanistic information, we observed substantial differences between the two kinetic models when lateral interactions were introduced. Here, the mean-field implementation applies coverage corrections directly to the descriptors, causing an artificial overprediction of the activity of strongly binding metals. In contrast, the cluster expansion in kMC implementation can differentiate among the highly active metals but it is very sensitive to the set of included interaction parameters. Considering that computational screening relies on a minimal set of descriptors, for which MKM makes reasonable trend predictions at a ca. three orders of magnitude lower computational cost than kMC, the MKM approach does provide a better entry point for computational catalyst design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reinforced AEM Separators Based on Triblock Copolymers for Electrode-decoupled RFBs

Washington University in St. Louis (WUSTL), in collaboration with The University of Texas at San Antonio (UTSA) and Giner Inc. developed highly selective anion exchange membranes (AEMs) and a novel electrode-decoupled redox flow battery (RFB) for grid scale energy storage as part of the ARPA-E IONICS program (with connections to the DAYS program in the later part of the project). RFBs exhibit the crucial characteristic of system-level decoupled scaling of energy and power which makes them cost effective for the multi-GWh scales envisioned for grid-scale energy storage solutions. This has led to extensive (and deserved) research interest and attention. This project aimed to enhance the design space available for redox-flow batteries (RFBs) by enabling the long-term separation of disparate cationic (elemental) actives using a highly selective membrane separator, while concurrently permitting the transport of anions to balance charge. The approach proposed was to design and develop a highly selective anion-exchange membrane (AEM), which would in turn permit the design and development of electrode-decoupled RFBs. Pairs of (different element) cationic species with redox reactions exhibiting a large difference in their standard electrode potentials were identified to develop high voltage, high power RFBs while disrupting the existing paradigm of using a single element which can ionize to more than two soluble oxidation states (e.g.: Vanadium).

25 ENERGY STORAGE↗
NASA NTRS1987

Effect of bonding on the performance of a piezoactuator-based active control system

The utilization of piezoelectric actuators in controlling the structural vibrations of flexible beams is studied. A Modified Independent Modal Space Control (MIMSC) method is devised to select the optimal location, control gains and excitation voltage of the piezoelectric actuators in a way that would minimize the amplitudes of vibrations of beams to which these actuators are bonded, as well as the input control energy necessary to suppress these vibrations. The presented method accounts for the effects that the piezoelectric actuators and the bonding layers have on changing the elastic and inertial properties of the flexible beams. Numerical examples are presented to illustrate the application of the MIMSC method and to demonstrate the effect of the physical and geometrical properties of the bonding layer on the dynamic performance of the actively controlled beams. The obtained results emphasize the importance of the devised method in designing more realistic active control systems for flexible beams, in particular, and large flexible structures in general.

Baz, A.↗
DOE OSTI2024

Mapping the Binary Covalent Alloy Space to Pursue Superior Nitrogen Reduction Reaction Catalysts

The electrochemical nitrogen reduction reaction (NRR) has the potential to decarbonize industrial ammonia production. However, NRR has poor activity and selectivity versus the competing hydrogen evolution reaction for catalysts that adhere to scaling relations. Overcoming the limitations imposed by scaling relations requires more complex catalyst materials, however, evaluating materials beyond simple metal systems is a large combinatorial problem that requires an improved understanding of the electrocatalyst surface to rationally guide the discovery of superior catalysts. The study uses grand canonical density functional theory to uncover NRR trends on a large and disparate set of binary covalent alloys (BCA) with variable compositions and active-site geometries. The studied BCAs generally follow scaling relations, albeit with larger variance and several systems that significantly break scaling. BCAs with early- to mid-transition metals tend to lie near the volcano peak and activate the N 2 triple bond via a side-on binding configuration. Trends in the BCA space cannot be readily predicted using simple electronic descriptors, which is ascribed to the large geometric variability of the BCA surfaces. Furthermore, it is anticipated that these findings will provide a foundation for the rational design of superior NRR electrocatalysts with increasing material complexity.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Circumnuclear Regions In Barred Spiral Galaxies: Near-Infrared Imaging - 1

We present sub-arcsecond resolution ground-based near-infrared images of the central regions of a sample of twelve barred galaxies with circumnuclear star formation activity, which is organized in ring-like regions typically one kiloparsec in diameter. We also present Hubble Space Telescope near-infrared images of ten of our sample galaxies, and compare them with our ground-based data. Although our sample galaxies were selected for the presence of circumnuclear star formation activity, our broad-band near-infrared images are heterogeneous, showing a substantial amount of small-scale structure in some galaxies, and practically none in others. We argue that, where it exists, this structure is caused by young stars, which also cause the characteristic bumps or changes in slope in the radial profiles of ellipticity, major axis position angle, surface brightness and colour at the radius of the circumnuclear ring in most of our sample galaxies. In 7 out of 10 HST images, star formation in the nuclear ring is clearly visible as a large number of small emitting regions, organised into spiral arm fragments, which are accompanied by dust lanes. NIR colour index maps show much more clearly the location of dust lanes and, in certain cases, regions of star formation than single broad-band images. Circumnuclear spiral structure thus outlined appears to be common in barred spiral galaxies with circumnuclear star formation.

Perez-Ramirez, D.↗
DOE OSTI2020

Control of Molecular Bonding Strength on Metal Catalysts with Organic Monolayers for CO 2 Reduction

The development of separate levers for controlling the bonding strength of different reactive species on catalyst surfaces is challenging but essential for the design of highly active and selective catalysts. For example, during CO 2 reduction, production of CO often requires balancing a trade-off between the adsorption strength of the reactant and product states: weak binding of CO is desirable from a selectivity perspective, but weak binding of CO 2 leads to low activity. Here in this paper, we demonstrate a new method of controlling both CO 2 adsorption and CO desorption over supported metal catalysts by employing a single self-assembly step where organic monolayer films were deposited on the catalyst support. Binding of phosphonic acid monolayers on supported Pt and Pd catalysts weakened CO binding via a through-support effect. The weakened CO adsorption was generally accompanied by decreased adsorption and reactivity of CO 2 . However, by the incorporation of basic amine functions at controlled positions in the modifying film, strong CO 2 adsorption and hydrogenation reactivity could be restored. Thus, both through-surface and through-space interactions could be manipulated by design of the organic modifiers. After surface modification, the catalysts exhibited significantly improved selectivity (up to ~99% at conversions near 50%) and activity toward CO production. Moreover, the rate of deactivation was notably reduced due to prevention of CO poisoning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electron and ion spectroscopy of azobenzene in the valence and core shells

Azobenzene is a prototype and a building block of a class of molecules of extreme technological interest as molecular photo-switches. We present a joint experimental and theoretical study of its response to irradiation with light across the UV to x-ray spectrum. The study of valence and inner shell photo-ionization and excitation processes combined with measurement of valence photoelectron-photoion coincidence and mass spectra across the core thresholds provides a detailed insight into the site- and state-selected photo-induced processes. Photo-ionization and excitation measurements are interpreted via the multi-configurational restricted active space self-consistent field method corrected by second order perturbation theory. Using static modeling, we demonstrate that the carbon and nitrogen K edges of azobenzene are suitable candidates for exploring its photoinduced dynamics thanks to the transient signals appearing in background-free regions of the NEXAFS and XPS.

Chemistry↗
NASA NTRS1976

A 0.4 to 10 GHz airborne electromagnetic environment survey of USA urban areas

An airborne electromagnetic-environment survey of some U.S. metropolitan areas measured terrestrial emissions within the broad frequency spectrum from 0.4 to 10 GHz. A Cessna 402 commercial aircraft was fitted with both nadir-viewing and horizon-viewing antennas and instrumentation, including a spectrum analyzer, a 35 mm continuous film camera, and a magnetic tape recorder. Most of the flights were made at a nominal altitude of 10,000 feet, and Washington, D. C., Baltimore, Philadelphia, New York, and Chicago were surveyed. The 450 to 470 MHz land-mobile UHF band is especially crowded, and the 400 to 406 MHz space bands are less active. This paper discusses test measurements obtained up to 10 GHz. Sample spectrum analyzer photograhs were selected from a total of 5,750 frames representing 38 hours of data.

Taylor, R. E.↗
NASA NTRS1976

0.4- to 10-GHz airborne electromagnetic-environment survey of United States urban areas

An airborne electromagnetic-environment survey of some U.S. metropolitan areas measured terrestrial emissions within the broad-frequency spectrum from 0.4 to 10 GHz. A Cessna 402 commercial aircraft was fitted with both nadir-viewing and horizon-viewing antennas and instrumentation, including a spectrum analyzer, a 35-mm continuous-film camera, and a magnetic-tape recorder. Most of the flights were made at a nominal altitude of 10,000 ft, and Washington, Baltimore, Philadelphia, New York, and Chicago were surveyed. The 450- to 470-MHz land-mobile UHF band is especially crowded, and the 400- to 406-MHz space bands are less active. Test measurements obtained up to 10 GHz are discussed. Sample spectrum-analyzer photographs were selected from a total of 5750 frames representing 38 hours of data.

Taylor, R. E.↗
NASA NTRS1983

Chronology of KSC and KSC related events for 1981

A record of aerospace and related activities in 1981 in which the John F. Kennedy Space Center had prominent involvement and interest is presented. Articles were selected from newspapers and other periodicals. Intended as a reference source or historians and other researchers, the document is arranged by month and items by date of the published sources.

Source record↗
NASA NTRS1989

STS-29 Post-Flight Crew Press Conference

This video contains footage selected and narrated by the Commander and the Space Shuttle crew including launch, TDRS-D/IUS deployment, onboard crew activities, and landing.

Source record↗
NASA NTRS2006

Scheduling Software for Complex Scenarios

Preparing a vehicle and its payload for a single launch is a complex process that involves thousands of operations. Because the equipment and facilities required to carry out these operations are extremely expensive and limited in number, optimal assignment and efficient use are critically important. Overlapping missions that compete for the same resources, ground rules, safety requirements, and the unique needs of processing vehicles and payloads destined for space impose numerous constraints that, when combined, require advanced scheduling. Traditional scheduling systems use simple algorithms and criteria when selecting activities and assigning resources and times to each activity. Schedules generated by these simple decision rules are, however, frequently far from optimal. To resolve mission-critical scheduling issues and predict possible problem areas, NASA historically relied upon expert human schedulers who used their judgment and experience to determine where things should happen, whether they will happen on time, and whether the requested resources are truly necessary.

Source record↗