Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active sites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Carbidic Mo is the sole kinetically-relevant active site for catalytic methane dehydroaromatization on Mo/H-ZSM-5

Systematic variation of Mo/Al = {0.10, 0.25, 0.35} in Mo/H-ZSM-5 catalysts effects ~20× change of Mo-to-H + ratio during methane dehydroaromatization (DHA) reactions at steady state and on deactivating catalysts. Mo and Brønsted-acid site count, respectively enumerated by ethane hydrogenolysis probe reaction and dimethyl ether chemical titration, evolve disparately during DHA catalysis, indicating the two sites reduce in number by distinct mechanisms. Here, the deactivation of Mo/H-ZSM-5 catalytic activity is uniquely attributed to the loss of active, or accessible, Mo sites, evinced by (i) the non-selective nature of deactivation (i.e. that deactivation occurs without modification of residual active sites), (ii) invariance in product distribution from Mo/H + = 0.10–2.1, and (iii) linear correspondence between Mo-catalyzed ethane hydrogenolysis rate and active site count during DHA on deactivating samples. DHA forward rate – the intrinsic kinetic descriptor of catalyst activity – normalizes by Mo content at steady state and on deactivating catalysts with Mo/Al = 0.10–0.35 for Mo-based contact times in the range τ Mo = 0.79–44 mol Mo s mol –1 C , unequivocally establishing Mo aggregates as the sole kinetically-relevant active site on Mo/H-ZSM-5. Brønsted-acid site content over a ~40× range in τ H+ = 1.4–54 mol H+ s mol –1 C has no discernable correlation with or effect on DHA rate, methane conversion, or product distribution – demonstrating H + does not catalyze any rate- or selectivity-determining steps in the benzene formation pathway and suggesting that the benefits of zeolitic acid sites are only to disperse Mo during catalyst synthesis and, conceivably, to catalyze equilibrated reaction steps.

02 PETROLEUM↗
DOE OSTI2025

Pyrolysis in Molten Salts Converts Plastics into a Mesoporous Electrocatalyst with a High Density of Atomic Fe–N–C Active Site

Upcycling plastic waste into value-added products is a promising strategy for both economic and environmental sustainability. However, achieving control over structure–property correlations during the upcycling process remains challenging. Here, in this study, we investigate the modulation of active site formation during pyrolytic conversion of plastics to carbon by composition-controlled molten salts. Using melamine formaldehyde (MF) foams as a precursor, we demonstrate that their pyrolysis in eutectic chloride molten salts with Fe 2+ , Na + , and K + ions directs the carbonization process toward the formation of mesoporous functional carbon enriched with atomically dispersed Fe–N–C sites, which are well-known for their catalytic activity in oxygen reduction reaction (ORR). Compared to pyrolysis in the FeCl 2 -only salt, the incorporation of alkali metal ions (Na + , K + ) in the eutectic mixture facilitates nitrogen retention in the carbon matrix and modulates iron speciation. This synergistic environment promotes a higher density and more uniform dispersion of Fe–N–C moieties within the carbon matrix. Consequently, the resulting catalyst exhibits a high surface area, hierarchical porosity, and improved electrochemical properties. When tested as an ORR catalyst, the Fe–N–C-enriched catalyst delivers a high half-wave potential (E 1/2 = 0.875 V vs RHE) with nearly exclusive 4e – pathway. These properties are comparable to those of commercial Pt/C catalysts, along with improved stability.

Fe−N−C active sites↗
DOE OSTI2022

Methane Activation by a Mononuclear Copper Active Site in the Zeolite Mordenite: Effect of Metal Nuclearity on Reactivity

The direct conversion of methane to methanol would have a wide reaching environmental and industrial impact. Copper-containing zeolites can perform this reaction at low temperatures and pressures at a previously defined O 2 -activated [Cu 2 O] 2+ site. However, after autoreduction of the copper-containing zeolite mordenite and removal of the [Cu 2 O] 2+ active site, the zeolite is still methane reactive. In this study, we use diffuse reflectance UV–vis spectroscopy, magnetic circular dichroism, resonance Raman spectroscopy, electron paramagnetic resonance, and X-ray absorption spectroscopy to unambiguously define a mononuclear [CuOH] + as the CH 4 reactive active site of the autoreduced zeolite. The rigorous identification of a mononuclear active site allows a reactivity comparison to the previously defined [Cu 2 O] 2+ active site. We perform kinetic experiments to compare the reactivity of the [CuOH] + and [Cu 2 O] 2+ sites and find that the binuclear site is significantly more reactive. From the analysis of density functional theory calculations, we elucidate that this increased reactivity is a direct result of stabilization of the [Cu 2 OH] 2+ H-atom abstraction product by electron delocalization over the two Cu cations via the bridging ligand. This significant increase in reactivity from electron delocalization over a binuclear active site provides new insights for the design of highly reactive oxidative catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into Active Sites and Mechanisms of Benzyl Alcohol Oxidation on Nickel–Iron Oxyhydroxide Electrodes

The electrochemical oxidation of bio-derived molecules has recently garnered interest for its potential in opening electrified synthetic pathways toward value-added products. Herein, we investigate the electrochemical conversion of benzyl alcohol (BA) to benzaldehyde and benzoate on nickel–iron (Fe ~ 7–18%) electrodes as a model system to understand reaction mechanisms and environmental conditions that can transform these molecules. Our results indicate a strong correlation between benzyl alcohol oxidation (BAO) onset potentials and Ni(II/III) redox peak positions, highlighting the potential role that lower oxidation states of nickel, i.e., Ni 3+ , can play in BAO catalysis. Our work on the Ni 2+/3+ system complements mechanisms that involve higher oxidation states of Ni as reported by others. We note that the Ni redox position and thus BAO onset is impacted by Fe incorporation during electrochemistry from unpurified electrolytes, which can resemble standard reactor operating conditions. We perform a systematic computational investigation into BAO and provide density functional theory (DFT) insights into how the redox mechanism has been such a prominent focus of alcohol oxidations. This includes the mode of BA adsorption and the nature of the adsorption site; upon conversion of the Ni 2+ surface to active Ni 3+ via hydroxyl deprotonation, BAO is thermodynamically downhill. Our DFT study also introduces the possibility of a vacancy-driven mechanism, though expected to be less prevalent during catalysis than the redox mechanism for a Ni 3+ surface. Through the systematic investigation of experimental reaction conditions and computational free energy thermodynamics, we have gained valuable insights into BAO reaction mechanisms that inform catalytic activity. Our study opens avenues for further design and development of catalyst active sites for the oxidation of related organic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Experimental Evidence and Mechanistic Description of the Phenolic H-Transfer to the Cu 2 O 2 Active Site of oxy-Tyrosinase

Tyrosinase is a ubiquitous coupled binuclear copper enzyme that activates O 2 towards the regioselective monooxygenation of monophenols to catechols via a mechanism that remains only partially defined. Here, we present new mechanistic insights into the initial steps of this monooxygenation reaction by employing a pre-steady state stopped-flow kinetics approach that allows direct measurement of the monooxygenation rates for a series of para-substituted monophenols by oxy-tyrosinase. The biphasic Hammett plot and the associated solvent kinetic isotope effect values provide direct evidence for an initial H-transfer from the protonated phenolic substrate to the Cu 2 O 2 core of oxy-tyrosinase. The correlation of these experimental results to quantum-mechanics/ molecular-mechanics calculations provides a detailed mechanistic description of this H-transfer step. Furthermore, these new mechanistic insights revise and expand our fundamental understanding Cu 2 O 2 active sites in biology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In Situ Studies of Methanol Decomposition Over Cu(111) and Cu2O/Cu(111): Effects of Reactant Pressure, Surface Morphology, and Hot Spots of Active Sites

The dissociative adsorption of methanol was investigated on Cu(111) and ultrathin Cu 2 O films. We employed synchrotron-based Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Scanning Tunneling Microscopy (STM) to study the dynamics of gas–solid interactions, and calculations based on Density Functional Theory (DFT) were used to examine the reaction path. C 1s XPS spectra revealed that methanol underwent dissociative adsorption on plain Cu(111) to form methoxy (CH 3 O), formaldehyde (H 2 CO), and formate (HCOO) at a pressure range of 0.5–10 mTorr, with these species remaining on the surface after evacuation. This was accompanied by the appearance of a low coverage (~0.05 ML) of O ads in the O 1s which can be considered a highly active site for methanol activation. The high activity is apparent by a coverage of 0.8 ML of methoxy at room temperature. STM was unable to image these species at room temperature as they were highly mobile on metallic copper. In contrast, for CH 3 OH on Cu 2 O/Cu(111), STM showed clear hot spots for reaction and a complex array of adsorption structures. On the oxide substrate, there was decomposition of methanol to H 2 CO, CH 3 O, HCOO, and hydrocarbon species (CH x ) due to the subsequent interactions of methanol with lattice oxygen. Cu(111) remained entirely saturated with decomposition products under 10 mTorr of methanol (θ ≈ 0.97 ML), whereas the Cu 2 O overlayer was saturated at a much lower coverage (θ ≈ 0.30 ML). STM revealed rows and step edges of Cu 2 O decorated with decomposition products and metallic Cu islands ~5 nm in size. The difference in activity between Cu(111) and Cu 2 O/Cu(111) is attributed to the significant amount of O present on the oxide surface. Additionally, Density Functional theory (DFT) calculations described the XPS measurements well, showing a likely methanol dissociation to *CH 3 O and therefore a surface reduction. More importantly, the DFT results revealed that it was the chemisorbed oxygen on Cu 2 O/Cu(111) which oxidized the dissociated *CH 3 O to *HCOO and eventually CO 2 , while the reaction only involving upper oxygen on the Cu 2 O hexagonal ring led to the formation of H 2 CO.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Elucidation of the Active Sites in Single-Atom Pd 1 /CeO 2 Catalysts for Low-Temperature CO Oxidation

Supported precious metals with atomic dispersion are of great interest in catalysis due to their potentials in achieving maximum atom efficiency and unique reactivities. Herein, the active sites for low-temperature CO oxidation are elucidated over single-atom Pd 1 /CeO 2 catalysts prepared via high-temperature atom trapping (AT). The increased oxygen vacancies on CeO 2 surface induced by 800 °C air calcination result in decreased Pd–CeO 2 coordinations, i.e., the coordination-unsaturated Pd 2+ on CeO 2 . Light-off and light-out measurements coupled with CO-DRIFTS and X-ray absorption characterization confirm that these coordination-unsaturated Pd 2+ on CeO 2 are much more reactive than the fully coordinated counterpart, evidenced by a decrease of T 90 (temperature to achieve 90% conversion) by ~100 °C in CO oxidation at a gas hourly space velocity of 300 L g –1 h –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The role of size and structure of catalytic active sites in polyolefin hydrogenolysis

The increasing amount of plastic waste poses serious environmental problems that threaten both ecosystems and human well-being. Hydrogenolysis has been widely studied as an effective approach for converting polyolefins into high-value liquids and waxy fuels. Their multifaceted reaction mechanism, including dehydrogenation, C–C bond cleavage, and hydrogenation, highlights the need for sophisticated catalyst design. The suppression of methane production, a persistent challenge in polyolefin hydrogenolysis, requires precise control of the cleavage site and inhibition of successive C–C bond cleavage. This delicate balance is achieved by carefully tuning the size and structure of metals. In this review, we investigate the effects of the size and structure of active sites on their catalytic activity and selectivity for the hydrogenolysis of polyolefins, including polyethylene and polypropylene. In conclusion, a fundamental understanding of hydrogenolysis mechanisms, combined with strategic synthetic methodologies, is crucial for creating efficient catalysts with tailored properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Neutron diffraction from a microgravity-grown crystal reveals the active site hydrogens of the internal aldimine form of tryptophan synthase

Pyridoxal 5′-phosphate (PLP), the biologically active form of vitamin B6, is an essential cofactor in many biosynthetic pathways. The emergence of PLP-dependent enzymes as drug targets and biocatalysts, such as tryptophan synthase (TS), has underlined the demand to understand PLP-dependent catalysis and reaction specificity. The ability of neutron diffraction to resolve the positions of hydrogen atoms makes it an ideal technique to understand how the electrostatic environment and selective protonation of PLP regulates PLP-dependent activities. Facilitated by microgravity crystallization of TS with the Toledo Crystallization Box, we report the 2.1 Å joint X-ray/neutron (XN) structure of TS with PLP in the internal aldimine form. Positions of hydrogens were directly determined in both the α- and β-active sites, including PLP cofactor. The joint XN structure thus provides insight into the selective protonation of the internal aldimine and the electrostatic environment of TS necessary to understand the overall catalytic mechanism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Cystine-knot peptide inhibitors of HTRA1 bind to a cryptic pocket within the active site region

Cystine-knot peptides (CKPs) are naturally occurring peptides that exhibit exceptional chemical and proteolytic stability. We leveraged the CKP carboxypeptidase A1 inhibitor as a scaffold to construct phage-displayed CKP libraries and subsequently screened these collections against HTRA1, a trimeric serine protease implicated in age-related macular degeneration and osteoarthritis. The initial hits were optimized by using affinity maturation strategies to yield highly selective and potent picomolar inhibitors of HTRA1. Crystal structures, coupled with biochemical studies, reveal that the CKPs do not interact in a substrate-like manner but bind to a cryptic pocket at the S1’ site region of HTRA1 and abolish catalysis by stabilizing a non-competent active site conformation. The opening and closing of this cryptic pocket is controlled by the gatekeeper residue V221, and its movement is facilitated by the absence of a constraining disulfide bond that is typically present in trypsin fold serine proteases, thereby explaining the remarkable selectivity of the CKPs. Our findings reveal an intriguing mechanism for modulating the activity of HTRA1, and highlight the utility of CKP-based phage display platforms in uncovering potent and selective inhibitors against challenging therapeutic targets.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Simultaneous occupancy of Cu C and Cu D in the ammonia monooxygenase active site

Ammonia monooxygenase (AMO), a copper-dependent membrane enzyme, catalyzes the first and rate-limiting step of nitrification: the oxidation of ammonia to hydroxylamine. Despite its central role in the global nitrogen cycle and its biotechnological relevance, structural characterization of AMO has lagged behind that of its homolog, particulate methane monooxygenase (pMMO), due to the slow growth rates of ammonia-oxidizing bacteria and the instability of AMO upon purification. Recent cryoEM studies of Nitrosomonas europaea AMO and Methylococcus capsulatus (Bath) pMMO in native membranes revealed new structural features, including two adjacent copper-binding sites in the transmembrane region, Cu C and Cu D , believed to constitute the active site. Although multiple structures were determined under various conditions, simultaneous occupancy of Cu C and Cu D was never observed, leaving their potential functional interplay unresolved. Here we report the 2.6 Å resolution cryoEM structure of AMO from Nitrosospira briensis C-128 in isolated native membranes. This structure reveals the first instance of simultaneous copper occupancy of the Cu C and Cu D sites, along with occupancy of the periplasmic Cu B site. Electron paramagnetic resonance (EPR) spectroscopic data indicate that the Cu B site is primarily occupied by Cu(II), while Cu C and Cu D are primarily occupied by diamagnetic ions, presumably Cu(I). Notably, a lipid molecule is bound between the Cu C and Cu D sites, separating them by ∼8.0 Å. The results underscore the importance of studying these enzymes in their native environments across species to resolve conserved and divergent molecular features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanocluster Active Sites Formed on Heterogeneous Thermal Catalysts and Electrocatalysts by Operando Reactive Environments

Here, in this Viewpoint, we summarize our recent studies in this endeavor, ending with a forward-looking perspective into the remaining challenges and open questions for consideration by the catalysis community. Through a computationally efficient framework of systematically investigating metal atom ejection from and migration onto metal surfaces, leading to the formation of metal atom clusters, we show that the surface of a metal catalyst is dynamic and much less rigid than previously thought. We suggest that the operando formed metal atom clusters are novel active sites, which can dominate the activity of steps or kinks (let aside terraces) from where their constituent atoms were ejected. Through more readily responding to reaction conditions by forming catalytically active clusters, solid metal catalysts approach not only homogeneous catalyst motifs, thus establishing a bridge between homogeneous and heterogeneous catalysis, but also liquid metals which have been suggested to be better than traditional heterogeneous catalysts.

adsorption↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge‐hosted Fe−N 3 Sites

Abstract Nitrogen‐doped, carbon‐supported transition metal catalysts are excellent for several reactions. Structural engineering of M−N x sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe−N 3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe−N 3 sites with varying Fe−N bond lengths distinguishable by X‐ray absorption spectroscopy. We investigate the CTH activity by density‐functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe−N 3 distortion, raises the Fe orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe−N bond length, an excellent activity descriptor. We elucidate the origin of the CTH activity and principles for high‐performing Fe−N−C catalysts by defect engineering.

Yang, Piaoping↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge–hosted Fe–N3 Sites

Nitrogen-doped, carbon-supported transition metal catalysts are excellent for several reactions. Structural engineering of metal-Nx sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe-N3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe-N3 sites with varying Fe-N bond lengths distinguishable by X-ray absorption spectroscopy. We investigate the CTH activity by density functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe-N3 distortion, raises the Fe [[EQUATION]]orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe-N bond length, an excellent activity descriptor. Furthermore, we elucidate the origin of the CTH activity and principles for high-performing Fe-N-C catalysts by defect engineering.

09 BIOMASS FUELS↗
DOE OSTI2021

Dual-atom active sites embedded in two-dimensional C 2 N for efficient CO 2 electroreduction: A computational study

Double-atom catalysts (DACs) have emerged as an enhanced platform of single-atom catalyst for promoting electrocatalytic CO 2 reduction reaction (CO 2 RR). Herein, we present a density-functional theory study on CO 2 RR performance of seven C 2 N-supported homo- and heteronuclear DACs, denoted as M 2 @C 2 N. Our results demonstrate that there exists substantial synergistic effect of dual-metal-atom N 2 M 2 N 2 active site and C 2 N matrix on O&#x2550 C &#x2550O bond activation. The dual-atom M 2 sites are able to drive CO 2 RR beyond C 1 products with low limiting potential (U L ). Specifically, C 2 H 4 formation is preferred on FeM@C 2 N (M = Fe, Co, Ni, Cu) versus CH 4 formation on CuM@C 2 N (M = Co, Ni, Cu). Furthermore, *CO+*CO co-binding strength can serve as a descriptor for CO 2 RR activity for making C 2 products such that the moderate binding results in the lowest U L . Remarkably, C-affinity matters most to C—C bond coupling and C 2 H 4 formation while both C- and O-affinity control CH 4 formation. Furthermore, our results provide theoretical insight into rational design of DACs for efficient CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗