Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave Energy Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Frequency stable high power lasers in space

The concept of a laser heterodyne gravity wave antenna that would operate in solar orbit with a one million kilometer path length is discussed. Laser technology that would be appropriate for operation of this space-based gravity wave detector is also discussed. The rapid progress in diode laser coupled with the energy storage and potentially sub-Hertz linewidths of solid state lasers, and the possibility of efficient frequency conversion by nonlinear optical techniques defines a technology that is appropriate for laser interferometry in space. The present status of diode-laser-pumped, solid state lasers is summarized and future progress is projected in areas of linewidth control, high average power, operating efficiency, and operational lifetimes that are essential for space-based applications.

Byer, Robert L.↗

The Supercritical Pile Gamma-Ray Burst Model: The GRB Afterglow Steep Decline and Plateau Phase

We present a process that accounts for the steep decline and plateau phase of the Swift X-Ray Telescope (XRT) light curves, vexing features of gamma-ray burst (GRB) phenomenology. This process is an integral part of the "supercritical pile" GRB model, proposed a few years ago to account for the conversion of the GRB kinetic energy into radiation with a spectral peak at E(sub pk) is approx. m(sub e)C(exp 2). We compute the evolution of the relativistic blast wave (RBW) Lorentz factor Gamma to show that the radiation-reaction force due to the GRB emission can produce an abrupt, small (approx. 25%) decrease in Gamma at a radius that is smaller (depending on conditions) than the deceleration radius R(sub D). Because of this reduction, the kinematic criticality criterion of the "supercritical pile" is no longer fulfilled. Transfer of the proton energy into electrons ceases and the GRB enters abruptly the afterglow phase at a luminosity smaller by approx. m(sub p)/m(sub e) than that of the prompt emission. If the radius at which this slow-down occurs is significantly smaller than R(sub D), the RBW internal energy continues to drive the RBW expansion at a constant (new) Gamma and its X-ray luminosity remains constant until R(sub D) is reached, at which point it resumes its more conventional decay, thereby completing the "unexpected" XRT light curve phase. If this transition occurs at R is approx. equal to R(sub D), the steep decline is followed by a flux decrease instead of a "plateau," consistent with the conventional afterglow declines. Besides providing an account of these peculiarities, the model suggests that the afterglow phase may in fact begin before the RBW reaches R is approx. equal to R(sub D), thus providing novel insights into GRB phenomenology.

parameters↗

Emerging flux, magnetic reconnection, plasma turbulence and waves in the transition zone of the solar atmosphere

Ultraviolet spectroscopy of the solar transition zone, especially Spacelab 2 results, is reviewed. Emerging magnetic flux is considered as the energy source of the solar corona and the solar wind. The conversion of magnetic into kinetic energy is facilitated in the transition zone because of unique conditions. Radiation losses are sufficient to create fast instabilities. Observed nonthermal velocities in spectra of the transition zone indicate the existence of strong plasma oscillations and turbulence. The small filling factor of the transition zone indicates a highly filamentary structure of density, magnetic field strength, and currents, which results in rapid reconnection time scales. Particle acceleration and the heating of the corona are placed in the areas of strong plasma oscillations of the transition zone.

Brueckner, G. E.↗

Technical options for high average power free electron milimeter-wave and laser devices

Many of the potential space power beaming applications require the generation of directed energy beams with respectable amounts of average power (MWs). A tutorial summary is provided here on recent advances in the laboratory aimed at producing direct conversion of electrical energy to electromagnetic radiation over a wide spectral regime from microwaves to the ultraviolet.

Swingle, James C.↗

Dynamics and energetics of the South Pacific Convergence Zone during FGGE SOP-1

The major research objectives are to diagnose the physical processes responsible for the maintenance of the South Pacific Convergence Zone (SPCZ) and to examine the role of the SPCZ in the large-scale circulation patterns of the Southern Hemisphere. To accomplish these objectives researchers used several data sources which include: a modified set of Level III-b upper air analyses, originally produced by ECMWF (Vincent, 1982); subjectively analyzed surface analyses for the South Pacific based on island station reports (Vincent, 1985); outgoing longwave radiation values supplied to us by NOAA/NESDIS; and equivalent black body temperatures and precipitation rates derived by Robertson. In the past year researchers found that wave number four plays an inportant role in the Southern Hemisphere tropics during the 15-day period when the sPCZ was a dominant feature, particularly with regard to the baroclinic conversion of potential to kinetic energy (Huang and Vincent, 1985). The convectively-active SPCZ area was found to make a significant contribution to this conversion process; thus, it appears that baroclinic effects and latent heating are important in maintaining the SPCZ. Recently efforts concentrated on two research tasks, an examination of cyclone activity within the SPCZ (Kann, 1985; Vincent, 1985; Vincent and Kann, 1985) and a study of the heat and moisture budgets in the South Pacific (Miller, et al., 1985). It was found that cyclonic disturbances occurred with regularity in the Zone from 10 to 17 January.

Vincent, D. G.↗

Hawaii Ocean Mixing Experiment: Program Summary

It is becoming apparent that insufficient mixing occurs in the pelagic ocean to maintain the large scale thermohaline circulation. Observed mixing rates fall a factor of ten short of classical indices such as Munk's "Abyssal Recipe." The growing suspicion is that most of the mixing in the sea occurs near topography. Exciting recent observations by Polzin et al., among others, fuel this speculation. If topographic mixing is indeed important, it must be acknowledged that its geographic distribution, both laterally and vertically, is presently unknown. The vertical distribution of mixing plays a critical role in the Stommel Arons model of the ocean interior circulation. In recent numerical studies, Samelson demonstrates the extreme sensitivity of flow in the abyssal ocean to the spatial distribution of mixing. We propose to study the topographic mixing problem through an integrated program of modeling and observation. We focus on tidally forced mixing as the global energetics of this process have received (and are receiving) considerable study. Also, the well defined frequency of the forcing and the unique geometry of tidal scattering serve to focus the experiment design. The Hawaiian Ridge is selected as a study site. Strong interaction between the barotropic tide and the Ridge is known to take place. The goals of the Hawaiian Ocean Mixing Experiment (HOME) are to quantify the rate of tidal energy loss to mixing at the Ridge and to identify the mechanisms by which energy is lost and mixing generated. We are challenged to develop a sufficiently comprehensive picture that results can be generalized from Hawaii to the global ocean. To achieve these goals, investigators from five institutions have designed HOME, a program of historic data analysis, modeling and field observation. The Analysis and Modeling efforts support the design of the field experiments. As the program progresses, a global model of the barotropic (depth independent) tide, and two models of the baroclinic (depth varying) tide, all validated with near-Ridge data, will be applied, to reveal the mechanisms of tidal energy conversion along the Ridge, and allow spatial and temporal integration of the rate of conversion. Field experiments include a survey to identify "hot spots" of enhanced mixing and barotropic to baroclinic conversion, a Nearfield study identifying the dominant mechanisms responsible for topographic mixing, and a Farfield program which quantifies the barotropic energy flux convergence at the Ridge and the flux divergence associated with low mode baroclinic waves radiation. The difference is a measure of the tidal power available for mixing at the Ridge. Field work is planned from years 2000 through 2002, with analysis and modeling efforts extending through early 2006. If successful, HOME will yield an understanding of the dominant topographic mixing processes applicable throughout the global ocean. It will advance understanding of two central problems in ocean science, the maintenance of the abyssal stratification, and the dissipation of the tides. HOME data will be used to improve the parameterization of dissipation in models which presently assimilate TOPEX-POSEIDON observations. The improved understanding of the dynamics and spatial distribution of mixing processes will benefit future long-term programs such as CLIVAR.

Ray, Richard D.↗

The "Supercritical Pile" Model for GRB: Tapping the Proton Energy and Getting the v F(sub V) Peak at Approx. 1 MeV

We propose a process by which the kinetic energy of the protons, that carry most of the energy of GRB relativistic blast waves (RBW) of Lorentz factor is converted explosively into relativistic electrons of the same Lorentz factor, which subsequently produce the observed prompt gamma-ray emission of the burst. This conversion is the result of the combined effects of the reflection of photons produced within the flow by upstream located matter, their re-interception and conversion into e(+) e(-) pairs on the RBW by the p gamma (right arrow) p e(+) e(-) reaction.

Kazanas, D.↗

Advancing the HERO WEC Through Integrated Modeling, Testing, and Field Deployments: Preprint

The Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC) was developed by the National Laboratory of the Rockies as a modular platform for advancing wave-powered desalination technologies. Designed to operate in either a hydraulic or electric configuration, the system enables direct comparison of mechanical-to-water and electrical-to-water conversion pathways using a single hardware architecture. Deployments at the Jennette's Pier test site in 2022 and 2024 demonstrated freshwater production between 60 and 300 gallons per day, including successful operation in wave heights as low as 0.25 m. A structured evaluation approach combining numerical modeling of hydrodynamic and PTO response, controlled laboratory testing, and in-ocean field deployments has been used to characterize and refine system performance. Insights from these efforts are now informing the second-generation HERO WEC (V2), which incorporates improved drivetrain components, refined geometry, enhanced control systems, and design updates aimed at increasing robustness and long-duration survivability. The HERO WEC platform continues to serve as an open-access research asset supporting broader marine energy and desalination development.

16 TIDAL AND WAVE POWER↗

2-Micron Laser Transmitter for Coherent CO2 DIAL Measurement

Carbon dioxide (CO2) has been recognized as one of the most important greenhouse gases. It is essential for the study of global warming to accurately measure the CO2 concentration in the atmosphere and continuously record its variation. A high repetition rate, highly efficient, Q-switched 2-micron laser system as the transmitter of a coherent differential absorption lidar for CO2 measurement has been developed in NASA Langley Research Center. This laser system is capable of making a vertical profiling of CO2 from ground and column measurement of CO2 from air and space-borne platform. The transmitter is a master-slave laser system. The master laser operates in a single frequency, either on-line or off-line of a selected CO2 absorption line. The slave laser is a Q-switched ring-cavity Ho:YLF laser which is pumped by a Tm:fiber laser. The repetition rate can be adjusted from a few hundred Hz to 10 kHz. The injection seeding success rate is from 99.4% to 99.95%. For 1 kHz operation, the output pulse energy is 5.5mJ with the pulse length of ~50 ns. The optical-to-optical efficiency is 39% when the pump power is 14.5W. A Ho:YLF laser operating in the range of 2.05 micrometers can be tuned over several characteristic lines of CO2 absorption. Experimentally, a diode pumped Ho:Tm:YLF laser has been successfully used as the transmitter of coherent differential absorption lidar for the measurement of CO2 with a repetition rate of 5 Hz and pulse energy of 75 mJ. For coherent detection, high repetition rate is required for speckle averaging to obtain highly precise measurements. However, a diode pumped Ho:Tm:YLF laser can not operate in high repetition rate due to the large heat loading and up-conversion. A Tm:fiber laser pumped Ho:YLF laser with low heat loading can operate in high repetition rate. A theoretical model has been established to simulate the performance of Tm:fiber laser pumped Ho:YLF lasers. For continuous wave (CW) operation, high pump intensity with small beam size is suitable for high efficiency. For Q-switched operation, the optimal energy extraction relies on the pump intensity, pump volume, and pump duration which is inversely proportion to the repetition rate. CW and Q-switched Ho:YLF lasers with different linear cavity configurations have been designed and demonstrated for a 30 W Tm:fiber pump laser. The CW Ho laser slope efficiency and optical-to-optical efficiencies reach 65% and 55%, respectively. The pulsed laser efficiency depends on the repetition rate. For 1 kHz operation, the optical-to-optical efficiency is 39% when the pump power is 14.5W. Currently, the injection seeding success rate is between 99.4% and 99.95%. After a ten thousand pulses, the standard deviation of the laser frequency jitter is about 3 MHz. It meets the requirements of highly precise CO2 concentration measurement. In conclusion, an injection seeded, high repetition rate, Q-switched Ho:YLF laser has been developed for a coherent CO2 differential absorption lidar. This master-slave laser system has high optical-to-optical efficiency and seeding success rate. It can potentially meet the requirements of the coherent detection of CO2 concentration by a differential absorption lidar technique.

Singh, Upendra N.↗

Advancing the HERO WEC Through Integrated Modeling, Testing, and Field Deployments

The Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC) was developed by the National Laboratory of the Rockies as a modular platform for advancing wave-powered desalination technologies. Designed to operate in either a hydraulic or electric configuration, the system enables direct comparison of mechanical-to-water and electrical-to-water conversion pathways using a single hardware architecture. Deployments in 2022 and 2024 at the Jennette's Pier test site in North Carolina demonstrated freshwater production between 60 and 300 gallons per day, including successful operation in wave heights as low as 0.25 m. A structured evaluation approach combining numerical modeling of hydrodynamic and power take-off response, controlled laboratory testing, and in-ocean field deployments has been used to characterize and refine system performance. Specifically, insights from these efforts are now informing the second-generation HERO WEC (V2) to increase robustness and overall survivability. Changes from the original prototype include improved drivetrain components, refined geometry, enhanced control systems, and design. The HERO WEC platform continues to serve as an open-access research asset supporting broader marine energy and desalination development.

16 TIDAL AND WAVE POWER↗

Long-range surface plasmons in electrode structures

Surface polaritons guided by symmetric double metal film structures are analyzed, with particular attention given to the attenuation of the two long-range modes that occur. It is found that long-range surface plasmon polariton modes do exist for double electrode structures over a limited range of material parameters. Guided by thin metal electrodes, surface plasmon polaritons can achieve millimeter plus propagation distances in the near infrared. It is pointed out that if the slab is electrooptic, then very low voltages will be needed to manipulate the waves. The fact that long-range modes exist simultaneously with junction tunnel plasmons may be of use in providing directional radiation from light-emitting junctions or the inverse process of light to electrical energy conversion.

Stegeman, G. I.↗

Relativistic electromagnetic waves in an electron-ion plasma

High power laser beams can drive plasma particles to relativistic energies. An accurate description of strong waves requires the inclusion of ion dynamics in the analysis. The equations governing the propagation of relativistic electromagnetic waves in a cold electron-ion plasma can be reduced to two equations expressing conservation of energy-momentum of the system. The two conservation constants are functions of the plasma stream velocity, the wave velocity, the wave amplitude, and the electron-ion mass ratio. The dynamic parameter, expressing electron-ion momentum conversation in the laboratory frame, can be regarded as an adjustable quantity, a suitable choice of which will yield self-consistent solutions when other plasma parameters were specified. Circularly polarized electromagnetic waves and electrostatic plasma waves are used as illustrations.

Chian, Abraham C.-L.↗

Northern vs. Southern Hemisphere energy conversions in January 1979

The methodology applied by Huang and Vincent (1985) for the diagnosis of the zonal and eddy energy conversions in the Southern Hemisphere was used to diagnose the energetics of the Northern Hemisphere for the same period (i.e., January 10-27, 1979). It was found that, in both hemispheres, the larger synoptic-scale waves are important in the AZ-AE-KE conversion. However, in the Northern Hemisphere, the long waves make the most significant contribution to this conversion cycle, whereas in the Southern Hemispere, the intermediate waves dominate.

Hurrell, James W.↗

Progress of research on water vapor lidar

Research is described on several aspects of stimulated Raman scattering (SRS) of 532 nm laser light in H2, D2, and CH4. The goals of this work are to develop a more thorough understanding of nonlinear processes involving the Raman effect and four-wave mixing, and to find the best way to generate radiation at several wavelengths simultaneously, for lidar applications. Issues addressed are conversion efficiency, optimization of operating conditions (gas pressure, confocal parameter, etc.) and the distribution of output pulse energy over three Stokes components, the first anti-Stokes component, and the zeroth order (pump) wavelength. The described research and results constitute another step in the development of SRS applications for NASA's atmospheric lidar program.

Wilkerson, T. D.↗

Space-based UV Spectropolarimetry for Chromospheric Magnetic Field Measurements

High-resolution observations with space-and ground-based telescopes, along with advanced numerical modeling, have highlighted the intricate coupling between the chromosphere, transition region, and corona, and the critical role the chromosphere plays in the mass and energy balance of the outer solar atmosphere. Despite these recent advances, a major impediment to better understanding the solar atmosphere is our lack of empirical knowledge regarding the direction and strength of the magnetic field in the upper chromosphere (Decadal Survey, 2012). Such measurements are crucial to address several major unresolved issues in solar physics: for example, to constrain the energy flux carried by the Alfvén waves propagating through the chromosphere, and to determine the height at which the plasma β = 1 transition occurs, which has important consequences for the braiding of magnetic fields, for propagation and mode conversion of waves and for non-linear force-free extrapolation methods that are key to determining what drives instabilities such as flares or coronal mass ejections. Probing the magnetic nature of the Sun’s atmosphere requires measurement of the Stokes I, Q, U and V profiles of relevant spectral lines (of which Q, U and V encode the magnetic field information). Many of the magnetically sensitive lines formed in the chromosphere and transition region are in the ultraviolet spectrum, necessitating observations above the absorbing terrestrial atmosphere. The Chromospheric Layer Spectro-Polarimeter (“CLASP2”) sounding rocket was flown successfully in April 2019, as a follow-on to the successful flight in September 2015 of the Chromospheric Lyman-Alpha Spectro-Polarimeter (“CLASP1”). In October of 2021, we re-flew the CLASP2 experiment with a modified observing program to further demonstrate the maturity of the UV spectropolarimetry techniques, and readiness for development into a satellite observatory. During the reflight, called “CLASP2.1”, the spectrograph slit was scanned across an active region plage to acquire a two-dimensional map of Stokes V/I, to demonstrate the ability of UV spectropolarimetry to yield chromospheric magnetic fields over a large area.

David E McKenzie↗

On the behavior of hydromagnetic surface waves

The behavior of velocity, magnetic field, and pressure perturbations about a continuously varying interface in pressure equilibrium is investigated in detail within ideal incompressible magnetohydrodynamics. A specific initial value problem is solved in quadrature for a thin interface and compared with the solution for a discontinuous interface. The unattenuated surface wave about a discontinuous interface is replaced at a thin interface by a collective surface disturbance which decays, with the associated energy density flowing into local oscillations within the interface. At long times the envelope of the local oscillations is concentrated within a small fraction of the thin interface (gradients within the envelope increase linearly with time, eventually resulting in a breakdown of the linearized ideal theory). Thus, the derived decay rate of the surface disturbance gives a mode-conversion rate rather than a heating rate. In applications to the propagation and dissipation of surface waves in the solar corona, this rate cannot in general be interpreted as a coronal heating rate.

Lee, M. A.↗

The Feasibility of Incorporating Engineering within SWAC and OTEC That Would Enhance Open-Ocean Aquaculture

The U.S. Department of Energy transmits to Congress the following Report to Congress on the Feasibility of Incorporating Engineering within Sea Water Air Conditioning (SWAC) and Ocean Thermal Energy Conversation (OTEC) that would Enhance Open-Ocean Aquaculture, as requested in the 2022 House Committee on Appropriations Report 117-98, an update to the previously requested Report on Ocean Thermal Energy Conversion (OTEC) and Sea Water Air Conditioning (SWAC) systems in noncontiguous states and U.S. territories, as requested in the 2021 House Committee on Appropriations Report 116-449, and more recently requested again in the 2023 House Committee on Appropriations Report 117-394.

16 TIDAL AND WAVE POWER↗