Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Water reuse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nanoscale heterogeneity of arsenic and selenium species in coal fly ash particles: analysis using enhanced spectroscopic imaging and speciation techniques

Coal combustion byproducts are known to be enriched in arsenic (As) and selenium (Se). This enrichment is a concern during the handling, disposal, and reuse of the ash as both elements can be harmful to wildlife and humans if mobilized into water and soils. The leaching potential and bioaccessibility of As and Se in coal fly ash depends on the chemical forms of these elements and their association with the large variety of particles that comprise coal fly ash. The overall goal of this research was to determine nanoscale and microscale solid phase mineral associations and oxidation states of As and Se in fly ash. We utilized nanoscale 2D imaging (30–50 nm spot size) with the Hard X-ray Nanoprobe (HXN) in combination with microprobe X-ray capabilities (~5 μm resolution) to determine the As and Se elemental associations. Speciation of As and Se was also measured at the nano- to microscale with X-ray absorption spectroscopy. The enhanced resolution of HXN showed As and Se as either diffusely located around or comingled with Ca- and Fe-rich particles. The results also showed nanoparticles of Se attached to the surface of fly ash grains. Overall, a comparison of As and Se species across scales highlights the heterogeneity and complexity of chemical associations for these trace elements of concern in coal fly ash.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Crystallization-assisted water adsorption in amorphous molecular adsorbents

Efficient and stable water adsorbents are essential for removing moisture from natural gas and olefins during their production. Industrial desiccants such as alumina and zeolites require high regeneration temperatures, while metal-organic frameworks often suffer from limited long-term stability and reusability. Here, we introduce a new type of molecular desiccants (M-PyC) that, in principle, can be reused indefinitely. These simple molecular coordination complexes undergo fully reversible phase transitions between crystalline and amorphous states through the decoordination (bond breaking) and recoordination (bond reforming) of water molecules. They exhibit high water uptake (30 wt%) and superb selectivity, excluding hydrocarbons entirely. Their effectiveness for dehydration, combined with low regeneration temperature, fast desorption kinetics, low-cost and green synthesis, easy scalability to kilogram quantities, and essentially unlimited recyclability, makes them truly competitive dehydration agents for industrial separations. The use of amorphous molecular adsorbents, where crystallinity and porosity are no longer stringent requirements, and the adsorption-desorption process entirely under ambient air, offers a conceptually different approach to adsorption-based separation science and potentially realistic solution to the long-standing challenge of sustained stability in coordinate-bonded adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High Pressure DME-Driven Fractional Crystallizations

Rare Earth Elements (REEs), include the 15 lanthanides plus yttrium and scandium and are crucial for various technologies and applications. Their low concentrations in the earth's crust require alternative sources. This study explores antisolvent fractional crystallization (FC) using dimethyl ether (DME) under high pressures to extract REEs from secondary sources such as mining waste, coal byproducts, and e-waste. DME's properties, including its solubility in water, small molecular size, and high vapor pressure, make it an effective antisolvent that can be easily recovered and reused. The method involves pressurizing DME to 1000-2000 psi in a reaction chamber with the test solution, followed by sample collection and analysis using ICP-MS and ICP-OES. This approach aims to address the limitations of current extraction methods, such as high energy consumption, chemical usage, and waste production, offering a potentially more efficient and sustainable solution for REE extraction.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2022

Multistage Surface-Heated Vacuum Membrane Distillation Process Enables High Water Recovery and Excellent Heat Utilization: A Modeling Study

Surface-heated membrane distillation (MD) enhances the energy efficiency of desalination by mitigating temperature polarization (TP). However, systematic investigations of larger scale, multistage, surface-heated MD system with high water recovery and heat recycling are limited. Here, we explore the design and performance of a multistage surface-heated vacuum MD (SHVMD) with heat recovery through a comprehensive finite difference model. In this process, the latent heat of condensation is recovered through an internal heat exchanger (HX) using the retentate from one stage as the condensing fluid for the next stage and an external HX using the feed as the condensing fluid. Model results show that surface heating enhances the performance compared to conventional vacuum MD (VMD). Specifically, in a six-stage SHVMD process, 54.44% water recovery and a gained output ratio (GOR) of 3.28 are achieved with a surface heat density of 2000 W m –2 , whereas a similar six-stage VMD process only reaches 18.19% water recovery and a GOR of 2.15. Mass and energy balances suggest that by mitigating TP, surface heating increases the latent heat trapped in vapor. The internal and external HXs capture and reuse the additional heat, which enhances the GOR values. We show for SHVMD that the hybrid internal/external heat recovery design can have GOR value 1.44 times higher than that of systems with only internal or external heat recovery. Furthermore, by only increasing six stages to eight stages, a GOR value as high as 4.35 is achieved. The results further show that surface heating can reduce the energy consumption of MD for brine concentration. As a result, the multistage SHVMD technology exhibits a promising potential for the management of brine from industrial plants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

From Salt to Electronics: Heteroepitaxy and GaAs Solar Cells

This paper presents work on the heteroepitaxy of salts, specifically fluorides, on semiconductor and heteroepitaxy of semiconductor on salts. Fluorides layers are deposited on commercial Gallium Arsenide (GaAs) wafers followed by the heteroepitaxial growth of GaAs using metal organic chemical vapor deposition (MOCVD). The fluoride layers consist of 2 lattice-engineered layers of alkaline-earth compounds to match with GaAs, and are used to sandwich another alkaline-earth compound with higher water-solubility as sacrificial layer. The triple fluoride layers enable liftoff of free-standing semiconductor films which can be further transferred to desirable substrates. 2D-X-ray Diffraction (2D-XRD) measurements confirm epitaxial growth of both the fluorides and the subsequently grown GaAs films. Single junction (SJ) solar cell devices based on thus prepared films show a power conversion efficiency (PCE) of 10.3% under 1 sun illumination. After the completion of device fabrications, the GaAs film is lifted off from the substrate by a novel water-assisted epitaxial liftoff (H 2 O-ELO) technique and transferred to a cheaper substrate. The original GaAs wafer is recycled and reused twice. Devices based on reused substrates show no significant degradation in performance. Lastly, the semiconductor-salt-semiconductor scheme has great implications in high performance, flexible, and large area electronics.

14 SOLAR ENERGY↗
DOE OSTI2024

Biomanufacturing and bioprocessing of lunar regolith

Microbial biomanufacturing is important to accelerate lunar construction because it can leverage lunar material and waste streams as feedstocks to create a circular production system. In-space bio-mining and biomanufacturing using moon and asteroidal source material will enable the creation of infrastructure, produce industrial fuels and lubricants, and enable recovery of actinides and rare-earth elements (REEs) present in trace concentrations. Moreover, biomanufacturing in closed-loop systems (recycling and reuse of resources toward the establishment of a circular economy) will enable long-term lunar activities by recycling waste (CO 2 , gray water) and producing oxygen and biomaterials. Our response focuses on the use of lunar regolith and waste streams as feedstocks for protein and microbial-enabled biomining and bioprocessing to extract actinides and REEs, and to create biocomposites for lunar infrastructure. We envision an enclosed process that initiates with (1a) extracting actinides and REEs from lunar regolith using immobilized proteins, followed by (1b) creating biocomposites from the post-extracted lunar regolith for infrastructure, and (1c) cultivating diatoms and other microalgae on waste streams to harvest silica shells for incorporating into biocomposites and to generate O 2 for human respiration and/or producing refinable feedstocks. LLNL has significant expertise in all three processes and provides facilities, personnel, and expertise at the intersection of metal (lanthanide, actinide, transition) separations, purifications, biohydrometallurgy, radiobiochemistry, synthetic and systems biology, and materials science and engineering. Importantly, all three processes are relatively well-studied for Earth-based workflows and can be derisked for demonstration on the lunar surface by 2029.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A global database of dissolved organic matter (DOM) concentration measurements in coastal waters (CoastDOM v1)

Abstract. Measurements of dissolved organic carbon (DOC), nitrogen (DON), and phosphorus (DOP) concentrations are used to characterize the dissolved organic matter (DOM) pool and are important components of biogeochemical cycling in the coastal ocean. Here, we present the first edition of a global database (CoastDOM v1; available at https://doi.org/10.1594/PANGAEA.964012, Lønborg et al., 2023) compiling previously published and unpublished measurements of DOC, DON, and DOP in coastal waters. These data are complemented by hydrographic data such as temperature and salinity and, to the extent possible, other biogeochemical variables (e.g. chlorophyll a, inorganic nutrients) and the inorganic carbon system (e.g. dissolved inorganic carbon and total alkalinity). Overall, CoastDOM v1 includes observations of concentrations from all continents. However, most data were collected in the Northern Hemisphere, with a clear gap in DOM measurements from the Southern Hemisphere. The data included were collected from 1978 to 2022 and consist of 62 338 data points for DOC, 20 356 for DON, and 13 533 for DOP. The number of measurements decreases progressively in the sequence DOC > DON > DOP, reflecting both differences in the maturity of the analytical methods and the greater focus on carbon cycling by the aquatic science community. The global database shows that the average DOC concentration in coastal waters (average ± standard deviation (SD): 182±314 µmol C L−1; median: 103 µmol C L−1) is 13-fold higher than the average coastal DON concentration (13.6±30.4 µmol N L−1; median: 8.0 µmol N L−1), which is itself 39-fold higher than the average coastal DOP concentration (0.34±1.11 µmol P L−1; median: 0.18 µmol P L−1). This dataset will be useful for identifying global spatial and temporal patterns in DOM and will help facilitate the reuse of DOC, DON, and DOP data in studies aimed at better characterizing local biogeochemical processes; closing nutrient budgets; estimating carbon, nitrogen, and phosphorous pools; and establishing a baseline for modelling future changes in coastal waters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Electrocatalytic nitrate reduction: controlling adsorbate affinity to tailor reaction products

Every year, Haber-Bosch nitrogen fixation to form ammonia releases immense volumes of CO2. At the same time, nitrate contamination from untreated wastewater threatens human health across the US. Development of circular processes to efficiently upgrade waste nitrate for reuse is critical to sustainably address this growing environmental hazard. Electrochemical reduction of nitrate operates at ambient temperatures and pressures, and can leverage distributed renewable energy sources and water as a hydrogen source for ammonia production. However, current catalysts lack electron efficiency in reducing nitrate versus water, lack selectivity in forming ammonia as a product, or rely on expensive rare metals, making widespread implementation unfeasible. To overcome these limitations, this proposal seeks a mechanistic understanding of nitrate electrochemical reduction on earth abundant metals and their alloys, with the goal of identifying active-site properties that improve both Faradaic efficiency and product selectivity. This insight will extend to other electrocatalytic reductive process that compete with water reduction.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Mechanical Property Assessment of Unirradiated Cladding After Exposure to Time at Temperature

Light water reactors in the United States are operated within inherent safety limits designed to account for anticipated operational occurrences (AOOs). Unlike more severe reactor transients, these events permit the potential reuse of reactor cladding, highlighting the nuanced role of thresholds in influencing reactor efficiency compared to design-basis or beyond-design-basis transient conditions. The threshold designated for AOO peak cladding and fuel temperatures are currently grounded around thermal hydraulic limits such as surpassing the critical heat flux (CHF), rather than in fuel-cladding material performance. This CHF criterion therefore represents a conservative approach to AOO transients during the reactor lifetime. Extending this threshold to higher temperatures than CHF can result in additional operation efficiency gains. Here, a material performance-based approach is assessed to better understand the physical material limits of short time scale exposures to elevated temperatures. This approach, termed time at temperature (t@T), references fuel cladding microstructural and mechanical response to rapid temperature transients in absence of radiation damage. The results of this work are expected to help identify margin for the United States reactor fleet, which could be utilized to increase operational efficiencies through decreased reactor outages.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

A Combined Thermochemical and Microbial Process for Recycling Polylactic Acid Polymer to Optically Pure L-Lactic Acid for Reuse

Polylactic acid polymer (PLA) produced from renewable resources can be recycled at the end of life to constituent monomer, optically pure lactic acid (LA), by a combination of chemical and biological processes. Efficient application of this closed loop of LA-PLA plastics-LA can minimize accumulation of plastics waste that pollute land and oceans. Temperature-dependent hydrolysis of PLA in water to LA follows apparent first order decay kinetics after a short lag. A modified Gompertz equation can explain the overall hydrolysis process. Alkali increased the rate of hydrolysis of PLA and reduced the length of lag period compared to water alone. The stoichiometry of base added to LA released was 1.0. The highest lactic acid yield was 0.95 g g -1 of PLA. D-LA in the syrup obtained after hydrolysis of PLA-plastics was removed using an engineered Escherichia coli to produce a L-LA syrup with an optical purity ≥ 99%. Here, these results show that thermochemical hydrolysis of PLA-based plastics to LA with optimum amount of base followed by bio-based purification to L-LA is an effective method of recycling PLA-plastics for reuse.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Techno-economic analysis of converting oil & gas produced water into valuable resources

Managing produced water from oil and gas wells constitutes a significant portion of the costs of operating a well. Here, in this work, we have designed two different centralized water treatment facilities capable of managing produced water from oil and gas wells in Texas and Louisiana, both of which convert the produced water into the following valuable resources: ten-pound brine and fresh water. The two main designs each use commercially available technology with varying levels of establishment in treating produced water. Both treatment processes remove oil and grease and suspended solids, reduce the divalent ion concentrations, and concentrate the brines to a near-saturation state. The baseline design uses chemical precipitation to remove the divalent ions to meet the reuse specifications, whereas the advanced design uses nanofiltration (NF) membranes to separate divalent ions and uses reverse osmosis (RO) membranes to partially concentrate the brine. Both models use mechanical vapor recompression to concentrate the brine up to NaCl saturation. The baseline process is shown to be cost-effective for low-hardness brines. In the case of high hardness, the chemical precipitation step is cost-prohibitive. We find that NF membranes are a promising alternative to chemical precipitation as a means of separating monovalent and divalent ions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

WaterPACT Fact Sheet

An inspired approach to plastics removal and reuse, the Waterborne Plastics Assessment and Collection Technologies (WaterPACT) project is working to develop technology solutions for plastics in U.S. waterways.

plastics, water power↗
DOE OSTI2020

Reformed Mesoporous Ge for Substrate Reuse in III-V Solar Cells

Mesoporous Ge was generated by bipolar electrochemical etching of (100) Ge. Through high-temperature annealing experiments, we found that the mesoporous Ge microstructure produces pore coalescence deep in the structure rather than at the surface. III-V epitaxy on annealed porous Ge with subsurface coalescence and coral-like structures on the surface produced shunted photovoltaic devices. The roughness of the annealed porous Ge film was reduced by a pre-annealing HBr treatment and a post-annealing ultrasonic DI water dip. A smoother reformed surface was obtained, on which a GaInAs upright device with an efficiency of 5.7% was grown, demonstrating a first step towards technical viability.

14 SOLAR ENERGY↗
DOE OSTI2025

Investigating the Role of Acid Sites in the Hydrocracking of Polyethylene-EVOH Multilayer Film Waste over Pt/BEA Catalyst

Multilayer polymer films (MFs) containing poly(ethylene-co-vinyl alcohol) (EVOH) and polyolefins are ubiquitous in single-use food and medical packaging. MFs are currently landfilled or incinerated rather than mechanically recycled because of the processing difficulties associated with their form factor and complex multicomponent structures. Advanced chemical recycling is a promising solution. Prior reports have explored hydrogenolysis and hydrodeoxygenation to convert EVOH, but these technologies are limited by catalyst deactivation and slow apparent kinetics, respectively. Alternatively, in this work, we demonstrate the efficient hydrocracking of commercial MFs into naphtha range (C5-C12) alkanes over platinum (Pt) supported on acidic zeolites. Mixtures of low-density polyethylene (LDPE) and EVOH are utilized as MF surrogates to gain fundamental insights. Pt deposited on BEA supports with varying Lewis acid site (LAS) concentrations are synthesized and tested for hydrocracking. Surprisingly, Pt/BEA with high LAS concentrations demonstrate improved activity for LPDE/EVOH blends over LDPE alone. In contrast, LAS concentrations are shown to have no influence on LDPE hydrocracking. LAS and Brønsted acid sites (BAS) catalyze the dehydration of EVOH to form water, which improves LDPE hydrocracking. Polyaromatics formed primarily via EVOH thermal degradation lead to detrimental coke formation, which hinders hydrocracking activity. Reaction conditions and feed ratios of LDPE and EVOH are tuned to balance these competing effects. Reusability tests demonstrate that Pt/BEA maintains high activity (81% conversion in 2 h) and high selectivity towards naphtha (78%) over multiple reuse cycles. Furthermore, these findings position hydrocracking as a promising technology for the circularity of complex MF plastic waste.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Gross and Net Soil Methane Flux and Ancillary Data, Edgewater, MD, USA, summer 2022

This data package contains measurements used to quantify methane cycling and environmental conditions in coastal forest soils during the 2022 growing season. It includes time‑series data of soil methane flux, soil respiration, soil temperature, and volumetric water content collected from soil monoliths transplanted along an inundation and salinity gradient. The package also provides one‑time measurements from a stable‑isotope pool‑dilution incubation, including gravimetric water content, methane headspace concentrations, and ¹³CH₄ enrichment over time. Data files are provided in comma‑separated values (CSV) format, with accompanying metadata and readme documentation in PDF and plain‑text formats. All files can be opened with standard software such as R, Python, or spreadsheet programs capable of handling CSV files. The metadata file describes variable definitions, units, processing steps, and the structure of each data table to support reuse and integration with other datasets.

13-C↗
DOE OSTI2025

Predicting Initial Trans-Membrane Pressure for Optimized Operations in UF Unit Using Random Forest

With the growing scarcity of freshwater, innovative process design mechanisms like Ultra-filtration(UF) units are increasingly gaining attention among water treatment utilities to address the rising demand. Ensuring reliable water production necessitates efficient resource utilization, minimizing downtime in UF systems. Recent advancements in machine learning (ML) have enabled the development of accurate data-driven models for Model Predictive Control (MPC), often requiring minimal prior knowledge of underlying physical processes. In this study, we present predictive regression models based on Random Forest (RF) and Auto-Regressive (AR) approaches to forecast the initial Trans-Membrane Pressure (TMP) for each filtration cycle in data generated by Direct Potable Reuse (DPR) systems. The proposed RF-based model demonstrates superior performance compared to baseline methods, including historical mean, Last Observation Carried Forward (LOCF), and naïve AR models, across various forecasting horizons in terms of root mean square (RMSE) metric. Accurate prediction of initial TMP is critical for optimizing CCRO operations, as it enables the development of robust modelling frameworks that enhance process efficiency and reliability. The demonstrated efficacy of the RF-based approach highlights its potential as a tool for real-time decision-making in water treatment systems, paving the way for advanced process optimization and sustainable water resource management.

Mukherjee, Subrata [ORNL] (ORCID:0000000309930338)↗
DOE OSTI2025

Hydraulic performance and wave transmission through nature-inspired perforated hollow-base piles breakwater

Nature-based Solutions (NbS) are critical to achieving long-term sustainable coastlines in deltaic coastlines, particularly susceptible to severe impacts under climate change. In recent years, coastal erosion has accelerated in the Vietnam Mekong Delta (VMD), particularly in the West Sea (from Ca Mau to Kien Giang). Due to the characteristics of muddy coastlines and eroded mangrove forests in this region, only a few engineering solutions have effectively reduced waves and promoted sediment accumulation to facilitate beach accretion. However, these solutions require significant investment and cannot be relocated or reused. Therefore, this study introduces a coastal mangrove-inspired perforated hollow-base piles breakwater (PHBPB), which uses the principle of biomimicry by studying the ability of mangrove groups to protect the coastline, stimulate sediment deposition, and over time, restore mangrove forests in the VMD. The hydraulic parameters of PHBPB were tested in 260 scenarios using a physical model, which included varying parameters such as crest width (B), pile row numbers (n c ), crest freeboard (R c ), and wave parameters (H s , T p ) in determining the capabilities of wave transmission, reflection, and wave dissipation. The results showed that the process of wave energy dissipation through perforated hollow-base breakwaters without piles (PHBBWP) is governed by three main parameters, including the relative water depth of the crest (R c /H m0,i ), the relative width of the crest (B/H m0,i ), and the wave slope at the structure location (s m = H m0,i /L m ). In contrast, for PHBPB, the primary influencing factors are the relative submergence depth or the length of the submerged pile portion (R c /H m0,i ) and the relative width of the pile system (X b /L m ). Finally, the hollow structure is suitable for the soft, weak mud geology in this region with poor load-bearing capacity, allows for rapid installation, is reasonably cost-effective, and can be relocated and reused once regeneration has been completed in each stretch of coastline.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

C3F: Collaborative Container-based Model Coupling Framework

Solving complex real-world grand challenge problems requires in-depth collaboration of researchers from multiple disciplines. Such collaboration often involves harnessing multiscale and multi-dimensional data and combining models from different fields to simulate systems. However, the progress on this front has been limited mainly due to significant gaps in domain knowledge and tools that are typically employed in silos of the domains. Researchers from different fields face considerable barriers to understanding and reusing each other’s data/models in order to collaborate effectively. For example, in solving the global sustainability problems, researchers from hydrology, climate science, agriculture, and economics need to run their respective models to study different components of the global and local food, energy and water systems while, at the same time, need to interact with other researchers and integrate the results of one model with another. Developing this kind of model coupling workflow calls for (1) a large amount of data being processed and exchanged across domains and organizations, (2) identifying and processing the output of one model to make it ready for integration into another model, (3) controlling the workflow dynamically so that it runs until a certain convergence condition or other criteria is met, and (4) close collaboration among the modelers to explore, tune, and test the configuration and data transformation needed to link the models. We have developed C3F, a flexible collaborative model coupling framework to help researchers accelerate their model integration and linking efforts by leveraging advanced cyberinfrastructure such as high-performance computing and virtual containers. In this paper, we describe our experience and lessons learned in developing this cyberinfrastructure solution to support the linking of Water Balance Model (WBM) and SIMPLE-G agricultural economic model in an NSF funded INFEWS project and a DOE-funded Program on Coupled Human and Earth Systems (PCHES) to study the implications of groundwater scarcity for food-energy-water systems. The C3F model coupling framework can be extended to facilitate other model linkages as well.

containerization↗