Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Detection of X-ray Emission From Galaxies Inside The Bootes Void

We report the x-ray properties of Bootes void galaxies detected by the ROSAT All-Sky Survey (RASS). By searching the fields of 26 radio and 27 emission-line-selected void galaxies, we have detected 9 x-ray emitting void galaxies at >2.7-sigma confidence level. Five of these 9 galaxies are in the IP,AS subsample. We expect 2 detections at the redshift of the Bootes void based on previous positional cross-correlation studies of the RASS and IRAS Point Source Catalogue sources. Three of the x-ray emitting galaxies are AGNs (IRAS~14288+5255, Mrk~845, and IRAS 15195+5050), and the remaining 6 are all likely emission line galaxies (PC~1357+4641, CG~547, CG~922, IRAS~14SOO+4804, CG~637, and IRAS~15092+3940). The far infrared flux levels of the AGN sources implies most of the observed x-ray emissivity is from starburst activity. We have carried out timing and spectral analysis for the narrow-line Seyfert 1 galaxy Mrk~845. Poor statistics prevents detailed analysis of the remaining sources. only two galaxies in our sample, BHI 1514+3819 and FSS 1515+3823, were observed during ROSAT pointed observations resulting in a nondetection at the 1-sigma level.

Kim, Chulhee↗
NASA NTRS2000

Quantifying Void Ratio in Granular Materials Using Voronoi Tessellation

Voronoi technique was used to calculate the local void ratio distribution of granular materials. It was implemented in an application-oriented image processing and analysis algorithm capable of extracting object edges, separating adjacent particles, obtaining the centroid of each particle, generating Voronoi polygons, and calculating the local void ratio. Details of the algorithm capabilities and features are presented. Verification calculations included performing manual digitization of synthetic images using Oda's method and Voronoi polygon system. The developed algorithm yielded very accurate measurements of the local void ratio distribution. Voronoi tessellation has the advantage, compared to Oda's method, of offering a well-defined polygon generation criterion that can be implemented in an algorithm to automatically calculate local void ratio of particulate materials.

Alshibli, Khalid A.↗
NASA NTRS2010

Three-Dimensional Computed Tomography as a Method for Finding Die Attach Voids in Diodes

NASA analyzes electrical, electronic, and electromechanical (EEE) parts used in space vehicles to understand failure modes of these components. The diode is an EEE part critical to NASA missions that can fail due to excessive voiding in the die attach. Metallography, one established method for studying the die attach, is a time-intensive, destructive, and equivocal process whereby mechanical grinding of the diodes is performed to reveal voiding in the die attach. Problems such as die attach pull-out tend to complicate results and can lead to erroneous conclusions. The objective of this study is to determine if three-dimensional computed tomography (3DCT), a nondestructive technique, is a viable alternative to metallography for detecting die attach voiding. The die attach voiding in two- dimensional planes created from 3DCT scans was compared to several physical cross sections of the same diode to determine if the 3DCT scan accurately recreates die attach volumetric variability

Brahm, E. N.↗
DOE OSTI2020

An interface-aware sub-scale dynamics multi-material cell model for solids with void closure and opening at all speeds

Here, we present a multi-material cell model (closure model) for demanding arbitrary Lagrangian-Eulerian (ALE) simulations of fluids and solids. It is based on the interface-aware sub-scale dynamics (IASSD) approach which utilizes the exact material interface geometry within the computational cell to calculate internal material interactions. Our formulation of the closure model also aims to improve the accuracy in low-speed impact events. Voids are used to represent ambient vacuum and internal free boundaries of the distinct materials. Void regions can close and open at contact surfaces, allowing a transition from contact physics to free motion in vacuum. The coupling of void closure and opening with a new formulation of the IASSD model for solids is tested on several one- and two-dimensional numerical examples, ranging from gas expansion in vacuum to planar and round object impacts at various speeds.

42 ENGINEERING↗
DOE OSTI2026

Interfacial Void Formation and Self-Healing in Oxide Scales on Al-containing High-Entropy Alloy

The exceptional high-temperature oxidation resistance of Al-containing high-entropy alloys (HEAs) is often attributed to the formation of a protective α-Al 2 O 3 scale. However, the dynamic, atomic-scale mechanisms governing the stability of this scale—including interfacial void formation and the often-postulated but rarely visualized “self-healing” capacity—remain poorly understood. Herein, we reveal the complex evolution of the triple-layer oxide scale on an Al 10 CoCrFeNi HEA through combined electron microscopy and diffraction study. We show that interfacial voids are an inherent consequence of the scaling process, originating from two distinct mechanisms: the Kirkendall effect at the interface between the γ-Al 2 O 3 /α-Al 2 O 3 and alloy driven by cationic diffusion imbalance and volumetric contraction due to phase transformations at the spinel/Cr 2 O 3 interface. Crucially, we provide microstructural evidence consistent with an intrinsic self-healing response. This process is driven by coupled inward diffusion of oxygen and outward diffusion of metal cations, leading to the in-situ formation of transient θ-Al 2 O 3 and spinel phases that partially fill and seal the voids. Here, these results provide atomic-scale insights into the phase evolution, defect formation, and self-repair of oxide scales in HEAs—highlighting pathways to enhance their oxidation resistance in extreme environments.

High-entropy alloy↗
DOE OSTI2024

High-throughput measurements of CO 2 permeance and solubility in ionic liquid reveal a synergistic role of ionic interactions and void fractions

The factors that govern CO 2 solubility in ionic liquids (ILs) are of great interest for the development of new materials for CO 2 capture and utilization. The cationic functional group (i.e., imidazolium, pyrrolidinium, pyridinium, etc.), alkyl chain length of cation, degree of fluorination of anion, anion size, and the void fraction in IL are known to influence CO 2 solubility. However, a comprehensive explanation of how these factors collectively affect CO 2 solubility has not been developed yet. This knowledge gap is largely attributed to the lack of CO 2 solubility data for IL structures other than imidazolium based ILs. We report here an automated high-throughput (HT) setup for the measurement of CO 2 solubility in room-temperature ILs (RTILs) combining six different anions and nine different cations for a total of 19 different specific ranges of RTILs. The HT setup first dispenses up to 200 µL of RTILs in a 96-well microtiter plate and then utilizes a robotic arm to measure cyclic voltammogram (CV) in each well using maneuverable Ag electrodes. The Cottrell analysis of the CO 2 reduction CV peak provides a direct measurement of CO 2 permeance in RTILs, which yields Henry’s constant from the estimated diffusion coefficient of CO 2 . Henry’s constants thus obtained are in very good agreement with those reported earlier. The measured CO 2 permeance and Henry’s constant of all RTILs seem to follow a first-order dependence on void fraction and a second-order dependence on electrostatic interaction between anion and cation of IL, with some synergistic dependence on the product of a void fraction and electrostatic interaction, making them two important descriptors for the design of novel ILs.

CO2 Solubility↗
DOE OSTI2021

Quasi-brittle porous material: Simulated effect of stochastic air void structure on compressive strength

Highlights: • A simulation procedure to study the effect of porosity on the compressive strength of a quasi-brittle material is introduced • Based on the simulated results, the relationship between compressive strength and air void fraction (porosity) is presented. • A linear relationship was achieved between the cubic root of porosity and the simulated compressive strength. The effect of porosity comprised of spherical air voids on the compressive strength of quasi-brittle material was studied via simulations. The simulated porous structures were based on pore size distributions of two mortar samples measured by X-ray microtomography. While the simulation method set practical limits on the size of sample, the base of the statistics was established by simulating 128 small structures generated by sampling from pore structures of two mortars. By studying the application of the classical strength-porosity formulas to the simulated data, a new simple model was formed. A linear relationship was achieved between the cubic root of air void fraction (porosity) and the simulated compressive strength. The reasons for scattering of simulated strength around fitted trend remained unresolved in this study; no clear dependence on pore number or other distribution properties was observed. With the presented simulation approach, the dependence of compressive strength on porosity is achieved independently of disturbances that occur in experimental studies creating understanding of compressional behavior of low porosity materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of secondary void-initiating particles on the steady-state crack growth resistance of high-strength steel

In this investigation, we focus on the dependence of stable crack growth resistance, as measured by the short-rod fracture toughness test, on secondary void-initiating particles such as AlN and Ti-based grain-refining precipitates in a variety of high-strength steels with tempered martensitic microstructures. The model developed by Ritchie and Thompson is modified to illustrate the significant amounts of toughening that can result from the refinement of secondary particles. Analysis of the data suggests that material strength is a predominant factor in increasing the short-rod fracture toughness relative to linear-elastic measures of initiation fracture toughness, but the extent of toughening is limited by the size and number density of secondary particles in the microstructure. The variation in estimates of secondary microvoid initiation and growth strains with precipitate size reinforce the notion that primary fracture at non-metallic inclusions and secondary fracture at smaller particles occur as sequential processes with a degree of concurrence that is dependent on the state of precipitation in both particle dispersions. Toughening in this connection is maximized by increases in microvoid growth strain that result from decreases in the size and areal number density of secondary void-initiating particles. Finally, the occurrence of transient instabilities during crack extension in short-rod specimens is explained with a phenomenological model that relates crack growth stability to natural variations in the dispersion of secondary void-initiating particles in the microstructure.

42 ENGINEERING↗
DOE OSTI2022

A fusion relevant data-driven engineering void swelling model for 9Cr tempered martensitic steels

The UCSB database on cavity evolution in 9-12Cr tempered martensitic steels (TMS), includes the results for both dual heavy and helium ion (DII), and High Flux Isotope Reactor (HFIR) in situ helium injection (ISHI) neutron irradiations at 500°C. These results were combined with literature single ion and fission neutron irradiation data to derive a model for the void volume fraction, f v , as a function of displacements per atom (dpa) and transmutant helium concentrations in atomic parts per million (appm). The scientific foundation for the paper is described in a companion paper entitled “Cavity Evolution and Void Swelling in Dual Ion Irradiated Tempered Martensitic Steels”. Here, in this study, we show that f v (dpa, He/dpa) is described by the incubation dose, dpa i , for the onset of void growth, and the post-incubation growth rate, f v ’(%/dpa). Both dpa i and f v ’ decrease with increasing He/dpa at > ~ 5. The dpa i is also lower for the ISHI neutron irradiations at the same He/dpa. Single heavy ion and fission reactor neutron irradiations, with low He/dpa ratios, have a much larger dpa i . Based on a combined analysis of DII, single ion, ISHI and fission neutron data, we further show that the post-incubation f v data analyzed here have a common empirical curve shape, with f v ’ reaching up to ~ 0.2%/dpa at very high dpa. We also show that f v ’ can be predicted based on a physical model of defect partitioning between evolving sinks. At 500°C and fusion relevant He/dpa ≈ 10, the best-fit model predicts nominal swelling, S = f v /(1-f v ), of ~ 1.1, 4.9 and 16% at 50, 100 and 200 dpa, respectively. The physically motivated, data-driven model includes estimated uncertainties for both dpa i and f v ’.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A quantitative method to determine the region not influenced by injected interstitial and surface effects during void swelling in ion-irradiated metals

We propose and demonstrate a microstructurally-based experimental method to quantitively determine the depth regions in self-ion-irradiated metals that are affected by the injected interstitial effect and various surface effects, focusing on the choice of safe analysis zones to minimize the impact of these phenomena. The goal is to define the depth ranges where extracted data can be confidently applied to ion-neutron correlations for reactor application. Since ion energies in the range of 1–5 MeV are most frequently employed by the radiation effects community, irradiations were conducted at four energies in this range, all proceeding at 475 °C. The experiment was conducted on relatively pure single crystal iron to focus only on physical phenomena, avoiding the influence of possibly confounding chemical or segregation processes. Care was also taken to minimize the influence of other physical factors such as crystalline orientation. It was shown that, at 475 °C, ion energies of ≤1 MeV were too shallow in penetration and did not yield a safe depth range, but irradiations at 2.5 MeV and above yielded useful safe zones with predicted swelling behavior becoming independent of ion energy. The surface-affected zone width was found to be roughly twice that of the void-denuded zone width and to be independent of accumulated displacement dose. The largest injected-interstitial effect arises from the injected interstitial depression of void nucleation and growth. The interstitial-affected region starts at about one half of the projected range and does not show any “spreading” of its influence in depth as the peak damage level increases from 50 to 100 dpa. This study provides some confidence that enhances the credibility of ion simulation when applied to prediction of void swelling in neutron environments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling plasticity-mediated void growth at the single crystal scale: A physics-informed machine learning approach

Modeling the evolution of voids during plastic flow as well as their effects on plastic dissipation is critical for both component manufacturing and lifetime estimation purposes. To this end, we propose a rate-dependent constitutive model to homogenize the effects of semi-randomly distributed voids on single crystal plasticity whilst capturing void interaction and plastic anisotropy. Here, this present work focuses on the case of face centered cubic crystals to introduce an anisotropic gauge function applicable within the crystal plasticity formalism. The approach combines analytical methods to describe the micromechanics of the system in combination with symbolic regression to capture analytically intractable mechanisms from data. The hybrid framework uses a physics-informed genetic programming-based symbolic regression algorithm to solve a multiform optimization problem simultaneously producing a new gauge function and a new strain rate equation. This is also a multi-objective optimization problem with many competing objectives. A new search and selection step is introduced to the genetic algorithm that promotes convergence toward a global solution that better satisfies all the objectives. Overall, the symbolic equations produced leverage data-driven methods to achieve greater accuracy than comparable alternatives on an analytically intractable problem while maintaining model transparency.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Gaussian integral method for void fraction

Here, a novel method, the Gaussian Integral Method (GIM), is presented for calculating void fractions in Computational Fluid Dynamics–Discrete Element Method (CFD-DEM) simulations. GIM is versatile and applicable to various grid types, including structured and unstructured polyhedral meshes, without requiring special boundary treatments. An optimization technique is introduced to make GIM independent of grid resolution and type. The method is validated against experimental data from a fluidized bed, demonstrating that GIM produces realistic simulations closely resembling experimental observations. Additionally, unstructured polyhedral grids using GIM outperform structured grids of equivalent resolution, yielding results more aligned with experimental data. The gradient of the void fraction is computed in the CFD solver and utilized in the DEM solver for precise estimation at particle locations. Overall, GIM provides an effective solution for void fraction calculations in particulate media simulations with complex geometries, enhancing the accuracy and applicability of CFD-DEM simulations for industrial processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

A Novel Microshear Geometry for Exploring the Influence of Void Swelling on the Mechanical Properties Induced by MeV Heavy Ion Irradiation

Small disks are often the specimen of choice for exposure in nuclear reactor environments, and this geometry invariably limits the types of mechanical testing that can be performed on the specimen. Recently, shear punch testing has been utilized to evaluate changes arising from neutron irradiation in test reactor environments on these small disk specimens. As part of a broader effort to link accelerated testing using ion irradiation and conventional neutron irradiation techniques, a novel microshear specimen geometry was developed for use with heavy-ion irradiated specimens. The technique was demonstrated in pure Cu irradiated to 11 and 110 peak dpa with 10 MeV Cu ions. At 11 peak dpa, the Cu specimen had a high density of small voids in the irradiated region, while at 110 peak dpa, larger voids with an average void swelling of ~20% were observed. Micropillar and microshear specimens both exhibited hardening at 11 dpa, followed by softening at 110 dpa. The close alignment of the new microshear technique and more conventional micropillar testing, and the fact that both follow intuition, is a good first step towards applying microshear testing to a wider range of irradiated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Explicit structural topology optimization using boundary element method‐based moving morphable void approach

Abstract This article presents an explicit topology optimization approach using boundary element method based moving morphable void (MMV). Structural analysis in the conventional MMV approach is performed on a fixed mesh over the entire design domain. However, in the proposed method structural boundaries are described using B‐splines and discretized with boundary elements making explicit representation of the boundaries possible. In this regard, the proposed approach has following merits: a) the use of weak material, which is often adopted to mimic voids can be completely avoided; b) exact and explicit description of voids in MMV allows the capture of tiny structural features in a robust and effective way; c) numerical instabilities stemming from the use of fixed meshes can be naturally avoided. Several numerical examples are provided to demonstrate the effectiveness of the proposed approach.

Zhang, Weisheng↗
DOE OSTI2022

3D printing of void-free glass monoliths: rheological and geometric considerations

Direct ink writing (DIW) is a versatile additive manufacturing technique capable of printing 3D architectures from a broad range of materials. The key advantage of DIW is the ability to spatially control both the architecture and the composition of the printed part, which enables the production of components with previously unachievable combinations of functionalities. One emergent application space for DIW has been in additively manufactured glass optics, where a “green body” is patterned layer-by-layer by extruding a silica-based slurry through a microfluidic nozzle and then thermally consolidated to transparent glass. A critical aspect of the process is ensuring that the printed part is completely free of voids that can occur in the interstitial spaces between the extruded filaments. This outcome is governed by the interplay between ink rheology and strains imposed by the printing process and geometric packing of the filaments. Here, we explore the strain- and rate-dependent deformation events in the DIW process to determine conditions that enable the printing of void-free monoliths without sacrificing shape fidelity. We focus on yield stress fluids consisting of fumed silica nanoparticles dispersed in organic solvents at varied volume fractions to control the rheological properties. We investigate the printability of these ink materials as a function of print process variables and devise the appropriate dimensionless parameters that capture the geometry-dependent and rate-dependent effects on the deformation of the extruded ink. Lastly, we use these scaling arguments to construct a phase diagram for void-free monolith printability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The effect of elastic anisotropy on the symmetry selection of irradiation-induced void superlattices in cubic metals

We report self-organized microstructures and patterns have been widely observed in non-equilibrium physical systems. In particular, irradiation in metals creates far-from-equilibrium environments, in which the competing dynamics of defect production and annihilation can lead to unique self-organized superlattice structures, e.g., void and gas bubble superlattices. From a physical point of view, the superlattice structures are dictated by the intrinsic symmetry breaking in the metals, i.e., anisotropy caused by the breaking of continuous rotational symmetry. In the literature, two distinctive anisotropies, elastic anisotropy and diffusion anisotropy of interstitials, have been proposed to be the origins of superlattice formation. However, it is still unclear which anisotropy dominates the symmetry selection of superlattice structures. In this paper, we study elastic anisotropy and its effect on the symmetry of void superlattices. By using theoretical analyses and phase field simulations, we show that elastic anisotropy in cubic metals can lead to either face-centered cubic or simple cubic superlattices depending on the Zener anisotropy ratio. The superlattices formed under this elastic anisotropy mechanism must form under the influence of spinodal decomposition, as the mechanism requires perturbations in the vacancy concentration field to develop into spatially-static concentration waves. We compare to existing work on symmetry selection in superlattices via diffusion anisotropy and to experimental observations, and we suggest that concentration wave development under the influence of elastic anisotropy is not the mechanism for symmetry selection during the formation of irradiation-induced void superlattices, but that diffusion anisotropy could be the dominant mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Single-shot in-line x-ray phase-contrast imaging of void-shockwave interactions in fusion energy materials

Recent breakthroughs in nuclear fusion, specifically the report of reactions exceeding scientific breakeven at the National Ignition Facility (NIF), highlight the potential of inertial fusion energy (IFE) as a sustainable and virtually limitless energy source. However, further progress in IFE requires characterization of defects in ablator materials and how they affect fuel capsule compression. Voids within the ablator can degrade energy yield, but their impact on the density distribution has primarily been studied through simulations, with limited high-resolution experimental validation. To address this, we used the x-ray free-electron laser (XFEL) at the matter in extreme conditions (MECs) instrument at the Linac coherent light source (LCLS) to capture 2D x-ray phase-contrast (XPC) images of a void-bearing sample with a composition similar to inertial confinement fusion (ICF) ablators. By driving a compressive shockwave through the sample using MEC's long-pulse laser system, we analyzed how voids influence shockwave propagation and density distribution during compression. To quantify this impact, we extracted phase information using two phase retrieval algorithms. First, we applied the contrast transfer function (CTF) method, paired with Tikhonov regularization and a fast optimization approach to generate an initial phase estimate. We then refined the result using a projected gradient descent (PGD) method that works directly with the sample's refractive index. Comparing these results with radiation adaptive grid Eulerian (xRAGE) radiation hydrodynamic simulations enables identification of model validation needs or improvements. By calculating phase maps in situ, it becomes possible to reconstruct areal density maps, improving understanding of laser-capsule interactions and advancing IFE research.

Hodge, D. S. [Colorado State Univ., Fort Collins, ↗
DOE OSTI2022

Got plenty of nothing: cosmic voids as a probe of particle dark matter

The search for a particle dark matter signal in terms of radiation produced by dark matter annihilation or decay has to cope with the extreme faintness of the predicted signal and the presence of masking astrophysical backgrounds. It has been shown that using the correlated information between the dark matter distribution in the Universe with the fluctuations of the cosmic radiation fields has the potential to allow setting apart a pure dark matter signal from astrophysical emissions, since spatial fluctuations in the radiation field due to astrophysical sources and dark matter emission have different features. The cross-correlation technique has been proposed and adopted for dark matter studies by looking at dark matter halos (overdensities). Here in this paper we extend the technique by focusing on the information on dark matter distribution offered by cosmic voids, and by looking specifically at the gamma-ray dark matter emission: we show that, while being underdense and therefore producing a reduced emission as compared to halos, nevertheless in voids the relative size of the cross-correlation signal due to decaying dark matter vs. astrophysical sources is significantly more favourable, producing signal-to-background ratios S/B (even significantly) larger than 1 for decay lifetimes up to 2 × 10 30 s. This is at variance with the case of halos, where S/B is typically (even much) smaller than 1. We show that forthcoming galaxy surveys such as Euclid combined with future generation gamma-ray detectors with improved specifications have the ability to provide a hint of such a signal with a predicted significance up to 5.7σ for galaxies and 1.6σ for the cosmic shear. The bound on the dark matter lifetime attainable exploiting voids is predicted to improve on current bounds in a mass range for the WIMP of 25 ÷ 900 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗