Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VOLTAMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Characterization of graphene oxide produced by Hummers method and its supercapacitor applications

In this study, Graphene Oxide (GO) is produced using Hummers method. The produced GO were investigated by x-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), UV-Vis spectrum, Raman spectroscopy and scanning electron microscopy (SEM). GO films on Ni foam were prepared by doctor-blading technique. The electrochemical performances of the as-synthesized GO electrode was evaluated using cyclic voltammetry (CV) in 6 M KOH aqueous solution. Capacitances of GO electrode was measured as 0.76 F/g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Influence of concentration and volume of precursor on the electrochemical properties of vanadium oxide thin films prepared by spray pyrolysis

Vanadium oxide (V{sub 2}O{sub 5}) thin films have been prepared by spray pyrolysis using different concentrations and volumes of precursor solution via aqueous route at 673K deposition temperature. The influences of concentration and volume on the structural, morphological and electrochemical properties of the deposited samples are studied well. X - ray diffraction study shows orthorhombic crystal structure with V{sub 2}O{sub 5} phase, confirmed by FTIR spectroscopy. Scanning electron microscopy shows granular, homogeneous and dense surface morphology. Cyclic voltammetery of all samples carried at all scan rates. Samples prepared using 0.05M, 40 ml of precursor solution shows highest specific capacitance 428.25 F/gm at 5 mV/s, Charge discharge behavior exhibits specific energy 18.73 Wh/kg, specific power 36.00 kW/kg, columbic efficiency 87.50 %. Impedance spectroscopy study was carried in the frequency range 1mHz – 1MHz, reveals pseudocapacitive behavior of the electrode exhibiting internal resistance 1.34 ohm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Effect of different nickel precursors on capacitive behavior of electrodeposited NiO thin films

In the present study, the effect of nickel precursors containing different anions like nitrate, chloride and sulphate on the morphology and pseudocapacitance behavior of NiO is investigated. The NiO samples were prepared by using a potentiondynamic electrodeposition technique in the three electrode cell. Cyclic voltammetry technique was exploited for potentiodynamic deposition of the films. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), etc. The XRD reveals the cubic crystal structure for all samples. The SEM micrograph shows nanoflakelike, up grown nanoflakes and honeycomb like nanostructured morphologies for nitrate, chloride and sulphate precursors respectively. The capacitive behavior of these samples was recorded using cyclic voltammetry (CV), charge-discharge and electrochemical impedance spectroscopy (EIS) in 1 M KOH electrolyte. The specific capacitance values of NiO samples obtained using CV for nitrate, chloride and sulphate precursors were 136, 214 and 893 Fg{sup −1} respectively, at the scan rate of 5 mVs{sup −1}. The charge discharge study shows high specific energy for the sample obtained from sulphate (23.98 Whkg{sup −1}) as compared to chloride (9.67 Whkg{sup −1}) and nitrate (4.9 Whkg{sup −1}), whereas samples of cholride (13.9 kWkg{sup −1} and nitrate (10.5 kWkg{sup −1}) shows comparatively more specific power than samples obtained from sulphate (7.6 kWkg{sup −1}). The equivalent series resistance of NiO samples observed from EIS study are 1.34, 1.29 and 1.27 Ω respectively for nitrate, chloride and sulphate precursors. These results emphasizes that the samples obtained from sulphate precursors provides very low impedance through honeycomb like nanostructured morphology which supports good capacitive behavior of NiO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Biopolymer protected silver nanoparticles on the support of carbon nanotube as interface for electrocatalytic applications

In this research, silver nanoparticles (SNPs) are prepared on the surface of carbon nanotubes via chitosan, a biopolymer linkage. Here chitosan act as stabilizing agent for nanoparticles and forms a network on the surface of carbon nanotubes. Synthesized silver nanoparticles-MWCNT hybrid composite is characterized by UV-Visible spectroscopy, XRD analysis, and FESEM with EDS to evaluate the structural and chemical properties of the nanocomposite. The electrocatalytic activity of the fabricated SNP-MWCNT hybrid modified glassy carbon electrode has been evaluated by cyclic voltammetry and electrochemical impedance analysis. The silver nanoparticles are of size ∼35 nm and are well distributed on the surface of carbon nanotubes with chitosan linkage. The prepared nanocomposite shows efficient electrocatalytic properties with high active surface area and excellent electron transfer behaviour.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Electrodeposition of Fe{sub 2}O{sub 3} nanoparticles and its supercapacitive properties

Fe{sub 2}O{sub 3} metal oxide nanoparticles are synthesized by electrodeposition method on stainless steel substrate. The crystal structure and surface morphological studies of the obtained metal oxide thin film are carried out by using X-ray diffraction (XRD) technique and Scanning Electron Microscopy (SEM) respectively. The electrochemical properties of Fe{sub 2}O{sub 3} thin film like Cyclic Voltammetry (CV), Galvonostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopy (EIS) are studied in a bath of 0.5 M Na{sub 2}SO{sub 4} as electrolyte. The observed specific capacitance shows improved values 135 Fg{sup −1} at 5 mVs{sup −1} scan rate. The electrochemical stability of Fe{sub 2}O{sub 3} electrode is investigated using cyclic voltammetry for 1000 cycles at a scan rate 50 mVs{sup −1}. The Fe{sub 2}O{sub 3} electrode exhibits superior cycling stability with only 4-5% capacitance loss after one thousand cycles. The values of specific power and specific energy of Fe{sub 2}O{sub 3} electrode obtained from Galvonostatic charge discharge studies are 2250 W.kg{sup −1} and 63.15 Wh.kg{sup −1} respectively at current density 1 A/g. From all the electrochemical properties of Fe{sub 2}O{sub 3} electrode, it indicates that it will be promising electrode material for supercapacitor application.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Cyclic performance tests of Sn/MWCNT composite lithium ion battery anodes at different temperatures

In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 °C, 35 °C, 50 °C) temperatures to determine the cyclic behaviors of anode at different temperatures. Anodes were produced via vacuum filtration and DC magnetron sputtering technique. Tin was sputtered onto buckypapers to form composite structure of anodes. SEM analysis was conducted to determine morphology of buckypapers and Sn-MWCNT composite anodes. Structural and phase analyses were conducted via X-ray diffraction and Raman Spectroscopy technique. CR2016 coin cells were assembled for electrochemical tests. Cyclic voltammetry test were carried out to determine the reversibility of reactions between anodes and reference electrode between 0.01-2.0 V potential window. Galvanostatic charge/discharge tests were performed to determine cycle performance of anodes at different temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Polythiophene-carbon nanotubes composites as energy storage materials for supercapacitor application

Polythiophene incorporated carbon materials have sought huge attention due to various improved electrochemical properties including enhanced electrical conductivity. Our work includes the synthesis of polythiophene (PTP)-multi-wallcarbon nanotubes (MWCNTs) via in-situ polymerization method. The homogeneous distribution of MWCNT in PTP was confirmed by Field Emission Scanning Electron Microscope (FESEM). Examination of the specimen using X-Ray diffraction (XRD), Fourier Transform-Infrared (FTIR) and Raman spectroscopy confirmed the composite formation. Other electrochemical characterizations like electrochemical impendence spectroscopy (EIS) and cyclic voltammetry (CV)of the PTP-MWCNT composite affirmed that incorporation of MWCNT improves the electrochemical properties of neat PTP including a significant increase in the capacitance. Hence making PTP-MWCNT isa better material for supercapacitor application than neat PTP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Structural and cyclic volta metric investigations on BIPBVOX solid electrolyte synthesized by ethylene glycol–citric acid sol–gel route

Samples of BIPBVOX.x (Bi{sub 2}V{sub 1–x}Pb{sub x}O{sub 5.5–x/2}) in the composition range 0.05 ≤ x ≤ 0.20 were prepared by ethylene glycol– citric acid sol–gel synthesis route. Structural investigations were carried out by X–ray diffraction, DTA. The highly conducting γ′– phase was effectively stabilized at room temperature for compositions with x ≥ 0.17. Cyclic voltammetric measurements showed reversible redox reactions of vanadium and irreversible redox reaction of Bi{sup 3+} in the BIPBVOX system during the first cathodic and anodic sweep. However, a higher stability against the reduction of Bi{sup 3+} to metallic bismuth was seen for x=0.20.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Synthesis of poly(aniline-co-o-toluidine) coatings on copper

The corrosion protective poly(aniline-co-o-toluidine) (PAOT) coatings were synthesized on copper (Cu) by the electrochemical copolymerization of aniline with o-toluidine under cyclic voltammetry conditions. Aqueous oxalate solutions were used as the supporting electrolytes for the synthesis of PAOT coatings on Cu. The resulting coatings were characterized by different spectroscopic techniques, cyclic voltammetry, ultraviolet-visible absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), and scanning electron microscopy. The Fourier Transform InfraRed (FTIR) spectroscopy and Nuclear Magnetic Resonance (NMR) spectroscopy studies reveal that the copolymerization of aniline and o-toluidine takes place on Cu substrates from an aqueous oxalate solutions and resulting in PAOT copolymer, there are more o-toluidine units than aniline units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Hydrazine sensing properties of microwave synthesized graphene/ZnO composites

This paper reports the synthesis of graphene/ ZnO nanocomposite using microwave method and its application in sensing of hydrazine. The morphological characteristics of the samples are studied using Scanning Electron Microscope (SEM). The formation of the composite is further confirmed by the X-ray Diffraction (XRD). Energy Dispersive X-ray Analysis (EDAX) shows the presence of carbon indicating the presence of graphene. The hydrazine sensing property of the electrode is studied using cyclic voltammometry (CV) and Chronoamperometry (CA) studeis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Electroreduction of CO{sub 2} using copper-deposited on boron-doped diamond (BDD)

Electroreduction of CO{sub 2} was studied at copper-modified boron-doped diamond (Cu-BDD) electrodes as the working electrode. The Cu-BDD electrodes were prepared by electrochemical reduction with various concentrations of CuSO{sub 4} solutions. FE-SEM was utilized to characterize the electrodes. At Cu-BDD electrodes, a reduction peak at around -1.2 V (vs Ag/AgCl) attributtable to CO{sub 2} reductions could be observed by cyclic voltammetry technique of CO{sub 2} bubbled in water containing 0.1M NaCl. Accordingly, electroreduction of CO{sub 2} was conducted at -1.2 V (vs Ag/AgCl) using amperometry technique. The chemical products of the electroreduction analyzed by using HPLC showed the formation of formaldehyde, formic acid, and acetic acid at Cu-BDD electrodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Anodic stripping voltammetry of synthesized CdS nanoparticles at boron-doped diamond electrodes

Cadmium sulphide (CdS) nanoparticles were chemically synthesized using reverse micelles microreactor methods. By using different washing treatments, UV-Vis spectroscopy showed that the absorption peaks appeared at 465 nm, 462 nm, 460 nm, and 459 nm respectively for CdS nanoparticles without and with 1, 2, and 3 times washing treatments using pure water. In comparison with the absorbance peak of bulk CdS at 512 nm, the shifted absorption peaks, indicates that the different sizes of CdS can be prepared. Anodic stripping voltammetry of the CdS nanoparticles was then studied at a boron-doped diamond electrode using 0.1 M KClO{sub 4} and 0.1 M HClO{sub 4} as the electrolytes. A scan rate of 100 mV/s with a deposition potential of -1000 mV (vs. Ag/AgCl) for 60 s at a potential scan from -1600 mV to +800 mV (vs. Ag/AgCl) was applied as the optimum condition of the measurements. Highly-accurate linear calibration curves (R{sup 2} = 0.99) in 0.1 M HClO{sub 4} with the sensitivity of 0.075 mA/mM and the limit of detection of 81 µM in 0.1 M HClO{sub 4} can be achieved, which is promising for an application of CdS nanoparticles as a label for biosensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Zanamivir immobilized magnetic beads for voltammetric measurement of neuraminidase at gold-modified boron doped diamond electrode

Biomolecule modified magnetic beads has been widely used in separation and sensing process. This study used streptavidin modified magnetic beads to immobilize biotin modified zanamivir. Biotin-streptavidin affinity facilitates immobilization of zanamivir on magnetic beads. Then interaction of zanamivir and neuraminidase was adopted as basic for enzyme detection. Detection of neuraminidase was performed at gold modified BDD using cyclic voltammetry technique. The measurement was carried out based on alteration of electrochemical signals of working electrode as neuraminidase response. The result showed that zanamivir was successfully immobilized on magnetic beads. The optimum amount of magnetic beads for zanamivir immobilization was 120 ug. Linear responses of neuraminidase were detected in concentration range of 0-15 mU. Detection limit (LOD) of measurement was 2.32 mU (R2 = 0.959) with precision as % RSD of 1.41%. Measurement of neuraminidase on magnetic beads could be also performed in the presence of mucin matrix. The linearity range was 0-8 mU with LOD of 0.64 mU (R2 = 0.950) and % RSD of 7.25%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Accomplishment of highly porous-lithium lanthanum titanate through microwave treatment

Perovskite structured (ABO{sub 3}) lithium lanthanum titanate (LLTO) is a successful electrolyte reported by several scientists in the recent past. It is believed that intercalation and de-intercalation of Li ions inside solid electrolyte can be improved by increasing the porosity of the material. Hence in this research work, an attempt is made to increase the porosity of the LLTO electrolyte by rapid-microwave synthesis route. The microwave prepared LLTO is compared with the sol-gel synthesized LLTO. The prepared samples are analyzed with XRD, SEM, PL and cyclic Voltammetry studies. Morphological analysis proves that microwave synthesized LLTO contains much pores compared to the Sol-gel LLTO. A remarkable difference in its electrochemical property is also demonstrated and analysed with cyclic voltammetric studies and the results are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

A one-dimensional stochastic approach to the study of cyclic voltammetry with adsorption effects

In this study, a one-dimensional stochastic model based on the random walk approach is used to simulate cyclic voltammetry. The model takes into account mass transport, kinetics of the redox reactions, adsorption effects and changes in the morphology of the electrode. The model is shown to display the expected behavior. Furthermore, the model shows consistent qualitative agreement with a finite difference solution. This approach allows for an understanding of phenomena on a microscopic level and may be useful for analyzing qualitative features observed in experimentally recorded signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Biochemical synthesis of water soluble conducting polymers

An efficient biomimetic route for the synthesis of conducting polymers/copolymers complexed with lignin sulfonate and sodium (polystyrenesulfonate) (SPS) will be presented. This polyelectrolyte assisted PEG-hematin or horseradish peroxidase catalyzed polymerization of pyrrole (PYR), 3,4 ethyldioxithiophene (EDOT) and aniline has provided a route to synthesize water-soluble conducting polymers/copolymers under acidic conditions. The UV-vis, FTIR, conductivity and cyclic voltammetry studies for the polymers/copolymer complex indicated the presence of a thermally stable and electroactive polymers. Moreover, the use of water-soluble templates, used as well as dopants, provided a unique combination of properties such as high electronic conductivity, and processability. These polymers/copolymers are nowadays tested/evaluated for antirust features on airplanes and helicopters. However, other electronic applications, such as photovoltaics, for transparent conductive polyaniline, actuators, for polypyrrole, and antistatic films, for polyEDOT, will be proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

New Diphosphopentamolybdate K{sub 5}[HP{sub 2}Mo{sub 5}O{sub 23}] · 10H{sub 2}O: Synthesis, Structure, and Characterization

A new diphosphopentamolybdate(VI) K{sub 5}[HP{sub 2}Mo{sub 5}O{sub 23}] · 10H{sub 2}O has been prepared employing solution method and characterized by single crystal X-ray diffraction, energy dispersive analysis, infrared spectroscopy, thermal stability analysis, cyclic voltammetry analysis, and ultraviolet visible spectroscopy. The compound crystallizes in the orthorhombic sp. gr. Pcab: a = 15.9661(10) Å, b = 19.0832(10) Å, c = 20.0970(9) Å, V = 6123.27(10) Å3, Z = 8. The crystal structure contains the polyanion units [HP{sub 2}Mo{sub 5}O{sub 23}]{sup 5–} around the potassium cations and lattice water. The [HP{sub 2}Mo{sub 5}O{sub 23}]{sup 5–} subunits are connected together through K−O−Mo bridges and hydrogen bonds. The crystal shape morphology was simulated using the Bravais–Friedel–Donnay–Harker model.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Preparation of Nanosized Tungsten and Tungsten Oxide Powders

Nanopowder tungsten oxide and metallic tungsten are obtained via pyrolysis of ammonium metatungstate. Two methods are used for the synthesis of tungsten oxide: the use of a fibrous matrix and pyrolysis of aerosol particles. Tungsten oxide particles are formed during the pyrolysis in air. Metallic tungsten nanoparticles are obtained via subsequent thermal reduction of tungsten oxide in hydrogen. The structure and morphology of the samples are studied with X-ray diffraction and scanning electron microscopy. Tungsten nanopowders with average sizes from 7 to 30 nm are obtained depending on synthesis temperature. The electrochemical characteristics of electrodes coated with tungsten nanoparticles are studied with cyclic voltammetry, impedance spectroscopy, and galvanostatic charge–discharge methods. An electrode with W nanoparticles exhibited a specific low-frequency capacitance of about 90 F/g due to thin tungsten oxide film on the surface of tungsten nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗