Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBLE WAVELENGTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Theodolite with CCD Camera for Safe Measurement of Laser-Beam Pointing

The simple addition of a charge-coupled-device (CCD) camera to a theodolite makes it safe to measure the pointing direction of a laser beam. The present state of the art requires this to be a custom addition because theodolites are manufactured without CCD cameras as standard or even optional equipment. A theodolite is an alignment telescope equipped with mechanisms to measure the azimuth and elevation angles to the sub-arcsecond level. When measuring the angular pointing direction of a Class ll laser with a theodolite, one could place a calculated amount of neutral density (ND) filters in front of the theodolite s telescope. One could then safely view and measure the laser s boresight looking through the theodolite s telescope without great risk to one s eyes. This method for a Class ll visible wavelength laser is not acceptable to even consider tempting for a Class IV laser and not applicable for an infrared (IR) laser. If one chooses insufficient attenuation or forgets to use the filters, then looking at the laser beam through the theodolite could cause instant blindness. The CCD camera is already commercially available. It is a small, inexpensive, blackand- white CCD circuit-board-level camera. An interface adaptor was designed and fabricated to mount the camera onto the eyepiece of the specific theodolite s viewing telescope. Other equipment needed for operation of the camera are power supplies, cables, and a black-and-white television monitor. The picture displayed on the monitor is equivalent to what one would see when looking directly through the theodolite. Again, the additional advantage afforded by a cheap black-and-white CCD camera is that it is sensitive to infrared as well as to visible light. Hence, one can use the camera coupled to a theodolite to measure the pointing of an infrared as well as a visible laser.

Crooke, Julie A.↗

James Webb Space Telescope: The First Light Machine

NASA James Webb Space Telescope (JWST) will search for the first luminous objects of the Universe to help answer fundamental questions about how the Universe came to look like it does today. At 6.5 meters in diameter, JWST will be the world's largest space telescope. Its architecture, e.g. aperture, wavelength range and operating temperature, is driven by JWST's science objectives. Introduction: Scheduled to start its 5 year mission after 2018, JWST will study the origin and evolution of galaxies, stars and planetary systems. Its science mission is to: Identify the first bright objects that formed in the early Universe, and follow the ionization history. Determine how galaxies form. Determine how galaxies and dark matter, including gas, stars, metals, overall morphology and active nuclei evolved to the present day. Observe the birth and early development of stars and the formation of planets. And, study the physical and chemical properties of solar systems for the building blocks of Life. Principle: To accomplish the JWST science objectives requires a larger aperture infrared cryogenic space telescope. A large aperture is required because the objects are very faint. The infrared spectral range is required because the objects are so far away that their ultraviolet and visible wavelength spectral lines are red-shifted into the infrared. Because the telescope is infrared, it needs to be cryogenic. And, because of the telescope is infrared, it must operate above the Earth's atmosphere, i.e. in space. JWST is probably the single most complicated mission that humanity has attempted. It is certainly the most difficult optical fabrication and testing challenge of our generation. The JWST 6.5 m diameter primary mirror is nearly a parabola with a conic constant of -0.9967 and radius of curvature at 30K of 15.880 m. The primary mirror is divided into 18 segments with 3 different prescriptions; each with its own off-axis distance and aspheric departure. The radius of curvature for all 18 segments must match to +/- 0.150 mm at 30K. JWST is diffraction limited at 2 micrometers which translates into a transmitted wavefront specification of 156 nm rms. Of that amount, 50 nm rms is allocated to the primary mirror. Each segment is allocated 22 nm rms surface error. At the start of the JWST program, the capability to make such a mirror did not exist. In 1996, NASA began a systematic and comprehensive mirror technology development effort which resulted in JWST. This program resulted in a qualified mirror fabrication process being approved in 2006. Today, all JWST primary mirror segments meet their requirements and are on schedule for a 2018 launch. The next step is system level assembly, integration and test. Ambient tests will be conducted at Goddard Space Flight Center and cryogenic system level testing will be performed in Chamber A at the Johnson Space Center.

Stahl, H. Philip↗

Evidence against a simple two-component model for the far-infrared emission from galaxies

Two of the first Infrared Astronomy Satellite (IRAS) results were that galaxies have a wide range of values for the ratio of 60 micron to 100 micron flux density (0.2 less than or equal to S sub 60/S sub 100 less than or equal to 1.0) and that this ratio is correlated with L sub fir, L sub b, L sub fir being the total far-infrared luminosity and L sub b being the luminosity at visible wavelengths (de Jong et al. 1984; Soifer et al. 1984). From these results arose the following simple model for the far-infrared emission from galaxies (de Jong et al. 1984), which has remained the standard model ever since. In this model, the far-infrared emission comes from two dust components: warm dust (T approx. equals 50 K) intermingled with, and heated by, young massive OB stars in molecular clouds and HII regions, and colder dust (T approx. equals 20 K) associated with the diffuse atomic hydrogen in the interstellar medium and heated by the general interstellar radiation field. As the number of young stars in a galaxy increases, S sub 60/S sub 100 increases, because there is a greater proportion of warm dust, and so does L sub fir/L sub b, because most of the radiation from the young stars is absorbed by the dust, leading to a swifter increase in far-infrared emission than in visible light. Although this model explains the basic IRAS results, it is inelegant. It uses two free parameters to fit two data (the 60 and 100 micron flux densities)-and there are now several observations that contradict it. Despite these major problems with the two-component model, it is not clear what should be put in its place. When considering possible models for the far-infrared emission from galaxies, the observational evidence for our own galaxy must be considered. Researchers suspect that the study by Boulanger and Perault (1988) of the far-infrared properties of the local interstellar medium may be particularly relevant. They showed that molecular clouds are leaky - that most of the light from OB stars in molecular clouds does not heat the dust in the clouds, but instead leaks out. The consequence of this is that that while most of the far-infrared emission from the solar neighborhood is from dust associated with diffuse HI, this dust is mostly heated by young stars.

Eales, Stephen A.↗

Calibration and Characterization of the NASA EOS Terra and Aqua MODIS Instruments

The Moderate Resolution Imaging Spectroradiometer (MODIS) instrument is operating on both of the Terra and Aqua missions within the NASA Earth Observing System (EOS). The Terra MODIS instrument began taking observations in February 2000 and the Aqua MODIS instrument began taking observations in June of 2002 and both continue to operate successfully up to the present time. The MODIS instrument scans the entire Earth every 24 hours at nominal spatial resolutions between 250 and 1000 meters. It has 36 spectral bands spanning the electromagnetic spectrum from the visible wavelengths mar 400 micrometers to the emissive thermal infrared wavelengths at 15 micrometers. The MODIS instruments produce approximately 40 geophysical products devoted to observing land, ocean, and atmospheric processes and trends. To meet the scientific objectives associated with the NASA Earth sciences efforts the MODIS instruments must be and have been carefully calibrated and the performance characterized to meet specifications and goals such as five percent radiance and two percent relative to the sun accuracy in the twenty bands providing reflected solar radiation observations and one percent radiance accuracy in the sixteen bands observing in the thermal infrared. Over the time spanning instrument development and the pre-launch calibration and characterization of the instrument through the years of operation in space, the performance of the MODIS instruments have changed in multiple ways and appropriate adjustments made in relevant algorithms and look-up tables necessary to produce observations that meet the scientific objectives and requirements. The changes have been quantified and accounted for through careful use of on-board calibration devices such as the Spectro-Radiometric Calibration Assembly (SRCA), the Solar Diffuser (SD) and its companion Solar Diffuser Stability Monitor (SDSM), deep-space and lunar observations, and calibration targets on the Earth's surface. The strictest and most difficult challenges have come in trying to meet the requirements for observing Ocean color and related ocean biology processes over time and space. Overall the MODIS observations have been very successful in providing valuable scientific and applications results. The essential capabilities of MODIS are to be provided in the future by the Visible and Infrared Imaging Radiometer Suite (VIIRS) on the National Polar Orbiting Environmental Satellite Series (NPOESS).

Salomonson, Vincent V.↗

International Satellite Cloud Climatology Project (ISCCP) Stage D2 Monthly Cloud Product - Revised Algorithm in Hierarchical Data Format (ISCCP_D2)

Since 1983 an international group of institutions has collected and analyzed satellite radiance measurements from up to five geostationary and two polar orbiting satellites to infer the global distribution of cloud properties and their diurnal, seasonal and interannual variations. The primary focus of the first phase of the project (1983-1995) was the elucidation of the role of clouds in the radiation budget (top of the atmosphere and surface). In the second phase of the project (1995 onwards) the analysis also concerns improving understanding of clouds in the global hydrological cycle. [Location=TROPOSPHERE] [Temporal_Coverage: Start_Date=1983-07-01; Stop_Date=] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=280 Km; Longitude_Resolution=280 Km; Temporal_Resolution=Monthly].

CLOUD TOP PRESSURE↗

Radiant heating concept efficient for light-transmitting windows

Single-pane, uncoated windows absorb infrared rays and transmit visible and near-visible wavelengths. Two opposed rod heaters direct infrared rays at the pane, reflectors aid in this heating which prevents condensation. These windows are useful for telescopes and cameras for oceanographic and related studies.

Neuman, J. R.↗

Visible and near-ultraviolet spectra of low-pressure rare-gas microwave discharges

The spectral emission characteristics of three commercial low pressure rare gas discharge lamps wire obtained in the near ultraviolet and visible wavelength range. All three lamps show a definite continuum over the entire wavelength range from 0.185 to 0.6 micrometers. Considerable line emission is superimposed on much of the continuum for wavelengths greater than 0.35 micrometers. These sources were used to make transmittance measurements on quartz samples in the near ultraviolet wavelength range.

Campbell, J. P.↗

ERTS-1 observes algal blooms in Lake Erie and Utah Lake

During late summer when the surface waters of Lake Erie reach their maximum temperature an algal bloom is likely to develop. Such phenomena have been noticed on other shallow lakes using ERTS-1 and characterize eutrophic conditions. The concentration of the algae into long streamers provides additional information on surface circulations. To augment the ERTS-1 MSS data of Lake Erie an aircraft was flown to provide correlative thermal-IR and additional multiband photographs. The algal bloom is highly absorptive in the visible wavelengths but reverses contrast with the surrounding water in the near-IR bands. The absorption of shortwave energy heats the dark brown algal mass, providing a hot surface target for the thermal-IR scanner.

Strong, A. E.↗

Optical space astronomy and goals of the large space telescope.

Optical astronomy now means the study of EM radiation in the very near IR and vacuum UV in addition to the visible wavelengths. Practical constraints presently define the IR limit at about 11000 A, where photoemissive cathodes become ineffective, and the UV limit at 912 A, where the hydrogen of the interstellar medium limits the view to very nearby objects. Salient events of the first decade of optical space astronomy are discussed together with the orbiting astronomical observatories. Particular attention is given to the large space telescope (LST) project, taking into account the physical characteristics of the LST and the scientific program.

O'Dell, C. R.↗

Measurement of plasma temperature and density using laser absorption

A laser radiation absorption technique, suitable for temporal measurement of the electron density, the temperature, or a simultaneous determination of both, in an LTE plasma, is discussed. The theoretical calculation of the absorption coefficient for a hydrogen plasma is outlined; some results are presented for visible wavelengths. Measurements of electron density and temperature are presented and shown to be in good agreement with those values obtained by other methods. Finally, the possible use of the argon ion laser for simultaneous electron density and temperature measurement is discussed, and the theoretical curves necessary for its application to hydrogen plasma diagnostics are shown.

Billman, K. W.↗

Study of recreational land and open space using Skylab imagery

The author has identified the following significant results. Despite almost uniform surface temperature conditions in the study area, the thermal imagery did illustrate the following possible uses: (1) Surface temperatures relative to 0 C reveal whether the snow and ice cover is wet and the melt pattern. This information is useful in hydrologic monitoring of runoff timing and rate, as well as indicating trafficability conditions on the snow. (2) When the surface temperature of snow and ice is below freezing, it may serve as an indicator of spatial variation of air temperatures. This information may be used in calculating the spatial variation of surface radiation budgets, or in observing synoptic weather condition changes or local microclimatic effects. (3) Frozen inland lakes with less than about three or four inches of snow over the ice may be differentiated from surrounding snow covered land areas; this is not always feasible in visible wavelength imagery. The feasibility of this application decreases as the ice thickness increases.

Sattinger, I. J.↗

Multiseasonal-multispectral remote sensing of phenological change for natural vegetation inventory

The author has identified the following significant results. Variations in phenological development among plant species was noted, as well as the tendency for the seasonal appearance of some vegetation types to be dominated by the appearance of one or a few similarly developing species. Most of the common plants in the study area could be characterized by temporal aspects of their phenological development. There was a strong similarity among the spectral signatures of vegetation types in which the spectral return was dominated by green plant material. When the soil background dominated the spectral return from a vegetation stand, then the spectral radiance and the vegetation physiognomy were apparently related. When the deciduous shrubs lost their leaves, their spectral signature altered with a slight decrease of radiance in the visible wavelengths and a strong decrease in the near infrared. As the foliage of perennial grasses cured from August to November, its apparent green radiance remained unchanged, red radiance increased over 50 percent, and near infrared radiance decreased approximately 30 percent. A reflective mineral surface exhibited high radiance levels in all four bands, thus providing a marked contrast to the absorption characteristics of vegetation canopies.

Schrumpf, B. J.↗

Effects of the atmosphere on remote sensing

The interaction between electromagnetic radiation and the earth's atmosphere is considered, taking into account windows in the electromagnetic spectrum, solar and terrestrial radiation, physical properties of the atmosphere, and clouds. The characteristics of upwelling radiation in the visible wavelengths are discussed along with infrared radiation and microwaves. Attention is given to radiant emittance, radiance, contrast, effects of atmospheric turbulence, ocean color, and questions concerning the classification of surface features with the aid of computers.

Fraser, R. S.↗

Visible optical isolator using ZnSe

A compact Faraday effect optical isolator was constructed for visible wavelengths and tested at 5145 A. The nonreciprocal element of the isolator was polycrystalline zinc selenide placed in the magnetic field of a permanent magnet. For 5145 A the isolator had a 2.06-dB insertion loss and a 25.5-dB isolation. Indices of refraction and Verdet constants were measured for zinc selenide in the wavelength region from 4700 to 6300 A.

Wunderlich, J. A.↗

Applications of Suits spectral model to wheat

Canopy reflectance calculations for a spring type Mexican wheat, Penjamo, are compared with published data on Scout winter wheat. Good agreement exists between model calculations and experimental data in the spectral range, 500 nm to 750 nm, suggesting that the model parameters for wheat can be applied to different cultivars of wheat in the same growth stage. Wheat canopy reflectance is dependent upon surface soil type and this dependency is examined with the Suits' spectral model. In this particular growth stage wheat reflectance is shown to be nearly independent of soil reflectance in the visible wavelengths and progressively dependent at longer wavelengths in the infrared.

Chance, J. E.↗

Simultaneous visible and ultraviolet spectroscopy of stellar wind variability in Zeta Puppis

Spectra of He II 4686 A and H-alpha in Zeta Pup were obtained simultaneously with Copernicus ultraviolet scans of several P Cygni profiles in this O4 If supergiant with strong mass loss. The visible-wavelength data show significant variations in the profiles of both lines, consisting of doubling of the emission over times of less than a day. Recent theoretical calculations show that the observed profile variations in 4686 A can be produced by significant fluctuations in the wind density. The Copernicus data show less variability, although in one scan of the 1400-A Si IV doublet there appears to be a significant enhancement of the emission which may be correlated with one of the doublings observed in 4686 A and H-alpha, as though a density enhancement formed at low levels and then moved outward in the wind.

Wegner, G. A.↗

Distribution of atmospheric ozone and how it is measured

The total amount of ozone in a vertical column has been measured spectroscopically at near ultraviolet and visible wavelengths, using ground- and satellite-based instruments. The vertical distribution of ozone from the surface up to approximately 100 km has been measured by a variety of techniques - chemical and optical - and from a number of observing platforms, including balloon, rocket, and satellite platforms. The various methods presently used for determining the atmospheric ozone distribution are reviewed, along with a discussion of their advantages and disadvantages. The observed average distribution of total ozone for the period 1958-1975 shows the expected geographic and seasonal variations. The variations of total ozone, including hemispheric differences, are clearly associated with large-scale circulation processes in the lower stratosphere. Approximately ten years of observations of the vertical ozone distribution, up through the ozone maximum, also show geographic and seasonal variations strongly related to the lower stratosphere circulation. The distribution above the maximum, however, results from the interaction of photochemistry and stratospheric motions.

London, J.↗

Some results of the UA-ARE Program

During the period of May 6-16, 1977, the University of Arizona Aerosol Research Group conducted a cooperative Aerosol and Radiation Experiment (UA-ARE Program) in Tucson, Ariz. The principal objective of the program was to compare how well theoretically computed fluxes at selected visible wavelengths agreed with measured fluxes for the case where the theoretical flux calculations were based on inferred atmospheric aerosol parameters derived exclusively from simultaneous optical remote sensing measurements. A second objective of the experiment was to intercompare the results obtained by different remote sensing techniques. The various measurement techniques employed in the UA-ARE Program are listed along with brief summaries of the information to be derived from the data obtained with each technique.

Reagan, J. A.↗