Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Mechanism of the oxidation of titanium disilicide.

Study of the oxidation of TiSi2 at temperatures of 300 to 1300 C. Wafers prepared using the techniques of powder metallurgy had densities of 95 to 98% of the theoretical value. On oxidation at temperatures up to 600 C, the polished wafers formed a protective, titania-silica glass. The rate data indicate a complex surface and diffusion-limited mechanism. Above 600 deg C, the oxide consisted of an amorphous SiO2 film with crystalline islands of TiO2 (rutile). From 1000 to 1300 C, parabolic kinetics with an activation energy of 21.3 kcal/mole were observed. These data are consistent with a model in which the rate-determining step is the diffusion of oxygen through the silica film with the simultaneous diffusion of titanium from the substrate to the islands of rutile growing on top of the amorphous silica.

Schwettmann, F. N.↗
NASA NTRS1972

Laser-induced gas breakdown - Spectroscopic and chemical studies.

Discussion of the results of several experimental investigations on laser-induced gas breakdown. The experiments included time-resolved spectroscopy, direct detection of H atoms with a TiO2 probe, and chemical reactions; each of them provided insight into the behavior of the medium at different times. Chemical reactions and explosions have been initiated by the laser beam when a plasma was created. No primary multiphotonic absorption and no macroscopic chemical reactions were observed below the breakdown threshold.

De Montgolfier, PH.↗
NASA NTRS1972

Bulk and rare earth abundances in the Luna 16 soil levels A and D.

Determination of the abundances of major, minor, and trace elements by means of sequential INAA (instrumental neutron activation analysis) in two Luna 16 soils, at levels A (about 7 cm depth) and D (about 30 cm depth). Abundances of the bulk elements in Luna 16 soils generally agree with the values reported by Vinogradov (1971). Elemental abundances of both bulk and trace elements are nearly the same for the two A and D soil levels. Overall, the chemical compositions of the two Luna 16 soils are more closely related to Apollo 11 soil 10084 than to Apollo 12 and 14 soils, with the exception of TiO2 abundances.-

Gillum, D. E.↗
NASA NTRS1972

Bulk, rare earth, and other trace elements in Apollo 14 and 15 and Luna 16 samples.

Measurement of 24 and 34 bulk, minor, and trace elements in lunar specimens by instrumental and radiochemical neutron activation analysis shows greater Al2O3, Na2O, and K2O abundances and higher TiO2, FeO, MnO and Cr2O3 depletions in Apollo 14 soil samples as compared to Apollo 11 samples and to most of Apollo 12 samples. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within about 200 m from the lunar module.

Laul, J. C.↗
NASA NTRS1972

Niobian rutile in an Apollo 14 KREEP fragment.

Niobian rutile was found in a KREEP lithic fragment of basaltic texture. The niobian rutile contains 85.3% TiO2, 7.1% Nb2O5, 2.65% Cr2O3, 0.70% ZrO2, 0.61% SiO2, 0.82% Al2O3 0.61% FeO, 0.52% CaO, 0.22% V2O3 in addition to minor amounts of MnO, MgO, and CeO2. Rare-earth elements were not detected, in contrast with lunar niobian rutile of Marvin (1971). Coexisting minerals in the KREEP fragment are major amounts of plagioclase and orthopyroxene, and minor amounts of olivine, ilmenite, augite, barian K-feldspar, whitlockite, troilite, Ni-Fe, zirkelite, and chromite.

Hlava, P. F.↗
NASA NTRS1972

The Oro Grande, New Mexico, chondrite and its lithic inclusion.

The Oro Grande, New Mexico, U.S.A., chondrite was found in 1971. Electron microprobe analyses and microscopic examination show the following mineralogy: olivine (Fa 19.3 mole %), orthopyroxene (Fs 16.2 mole %), diopside, feldspar (An 13.6 mole %), chlorapatite, whitlockite, kamacite, taenite, troilite, chromite, and an iron-bearing terrestrial weathering product. A bulk chemical analysis of the meteorite shows the following results (weight %): Fe 0.84, Ni 1.46, Co 0.07, FeS 3.62, SiO2 34.18, TiO2 0.14, Al2O3 1.83, Cr2O3 0.55, Fe2O3 21.25, FeO 9.13, MnO 0.31, MgO 21.52, CaO 1.72, Na2O 0.70, K2O 0.08, P2O5 0.25, H2O(+) 2.14, H2O(-) 0.40, C 0.22, sum 100.41. On the basis of composition and texture the Oro Grande meteorite is classified as an H5 chondrite.

Fodor, R. V.↗
NASA NTRS1973

Moessbauer spectroscopic studies of iron-doped rutile.

Moessbauer spectra were obtained of single crystal and powdered samples of rutile (TiO2) doped to about one percent by weight in isotopically enriched iron. It is shown that the oxidation state may be reversibly altered in situ. After reduction, the oxygen neighbors of the dopant ion are apparently shifted to accomodate the larger ferrous ion. The agreement of calculated quadrupole splittings with experimental results suggests that impurities and oxygen vacancies are uniformly distributed in powdered samples, giving the dopant ions an 'ideal lattice' local environment. The differences between the single crystal and powder sample hyperfine parameters are attributed to variations in stoichiometry, charge compensation mechanisms, or other diffusion related parameters.

Stampfl, P. P.↗
NASA NTRS1973

Elasticity of some mantle crystal structures. II.

The single-crystal elastic constants are determined as a function of pressure and temperature for rutile structure germanium dioxide (GeO2). The data are qualitatively similar to those of rutile TiO2 measured by Manghnani (1969). The compressibility in the c direction is less than one-half that in the a direction, the pressure derivative of the shear constant is negative, and the pressure derivative of the bulk modulus has a relatively high value of about 6.2. According to an elastic strain energy theory, the negative shear modulus derivative implies that the kinetic barrier to diffusion decreases with increasing pressure.

Wang, H.↗
NASA NTRS1973

Oxide minerals in lithic fragments from Luna 20 fines.

One hundred seventy-six oxide mineral grains in the Luna 20 samples were analyzed by electron microprobe. Spinel is the most abundant oxide, occurring in troctolite fragments. Next most abundant is ilmenite, which occurs in all rock types except those containing spinel. Chromite also occurs in all rock types except those containing spinel. Minor amounts of ulvospinel, armalcolite, zirkelite, baddeleyite and an unidentified TiO2-rich phase were also found. Spinel grains are predominantly spinel-hercynite solid solutions, commonly with very minor chromite. The Fe/(Fe + Mg) ratio is generally lower than in spinel from Apollo 14 rocks. Chromites in non-mare rocks are similar to those from mare rocks. Ilmenite of mare origin is Mg-poor and Zr-rich compared to non-mare ilmenite; these elements may therefore be useful in determining the origin of ilmenite grains. Phase equilibria considerations suggest that spinel troctolite crystallized from a melt high in alumina; a likely candidate is the high-alumina basalt of Prinz et al. (1973).

Brett, R.↗
NASA NTRS1972

Thermal expansion compatibility of ceramic chip capacitors mounted on alumina substrates.

The thermal expansion coefficients of a representative sample of BaTiO3 and TiO2 ceramic chip capacitors and alumina substrates have been examined. These data have revealed large potential mechanical stresses under thermal cycling. A mathematical analysis of a composite model of the capacitor to predict the thermal expansion and modulus of elasticity and an analysis of the capacitor-substrate system to predict the magnitude of thermally induced stresses have been conducted. In all cases studied, thermally induced stresses great enough to cause capacitor body rupture or termination failure was predicted.

Allen, R. V.↗
NASA NTRS1974

Environmental protection of titanium alloys at high temperatures

Various concepts were evaluated for protecting titanium alloys from oxygen contamination at 922 K (1200 F) and from hot-salt stress-corrosion at 755 K (900 F). It is indicated that oxygen-contamination resistance can be provided by a number of systems, but for hot-salt stress-corrosion resistance, factors such as coating integrity become very important. Titanium aluminides resist oxygen ingress at 922 K through the formation of alumina (on TiAl3) or modified TiO2 (on Ti3Al, TiAl) scales. TiAl has some resistance to attack by hot salt, but has limited ductility. Ductile Ti-Ni and Ti-Nb-Cr-Al alloys provide limited resistance to oxygen ingress, but are not greatly susceptible to hot-salt stress-corrosion cracking.

Wright, I. G.↗
NASA NTRS1974

The formation of goethite and hydrated clay minerals on Mars

Laboratory studies reported by Huguenin (1973) on the kinetics and mechanism of the photostimulated oxidation of magnetic and preliminary laboratory data on the weathering of silicates, reported herein, are applied to Mars. Basalts in the Martian dark areas are predicted to alter to hydrated Fe(2 plus or minus) depleted clay minerals, minor goethite, and minor to trace amounts of transition metal oxides such as TiO2, MnO2, and Cr2O3 at a rate of 10 to the minus 1.5 plus or minus 1.5 micron/yr. Some Ca-Mg carbonates are also expected to be formed. The clay minerals are predicted to be more silica-rich than the silicate source material, SiO2 contents of 60% or higher being expected, and strongly depleted in Fe(2+). The oxygen, OH, and H2O contents of the bulk weathering product are predicted to be significantly greater than those of the dark-area source materials, whereas the relative bulk metal abundances should be the same.

Huguenin, R. L.↗
NASA NTRS1974

X-ray spectral microanalysis of composition of individual lunar regolith particles

Determinations were made of the chemical compositions of selected olivine crystals, spherical particles ranging in size from 170 to 350 micrometer, spinels, and magnetic particles. The olivines contain 30 to 50 mole percent fayalite. The spherical particles of various colors are aluminosilicate glasses, significantly enriched in CaO compared with the mean composition of the regolith. The degree of coloration depends on the FeO content and also the admixtures TiO2, MnO, and Cr2O3. Compositionally, the spinel was interpreted to be chromopicotites. Magnetic particles were shown to be complex intergrowths of nickelous iron and aluminosilicates. The composition of the metallic phase of one particle (in percent) was: Fe - 86, Ni - 13.6, and Co - 0.16 in combination with plagioclase and microinclusions of ilmenite in silicate. Kamacite was determined in another intergrowth of Fe, Ni, and Co.

Ilin, N. P.↗
NASA NTRS1974

Mare basalts from the Taurus-Littrow region of the moon

Two distinct chemical basalt types have been sampled at the Apollo 17 landing site. Very high-titanium basalts (about 13 wt % TiO2) are the dominant type and display a textural range from olivine-porphyritic, ilmenite vitrophyres to plagioclase-poikilitic, ilmenite microgabbros. Most of these rocks could have come from one flow. These basalts appear to represent partial melts from feldspar-ilmenite cumulates with an Ar-40/Ar-39 age of about 3.7 G.y., which have experienced little, if any, near-surface fractionation of olivine and Fe-Mg-Ti oxides. A second type of basalt virtually identical to the Apollo 11 (low-K) basalts is much less common.

Papike, J. J.↗
NASA NTRS1974

Experimental liquid line of descent and liquid immiscibility for basalt 70017

The paper describes one possible liquid line of descent produced for a high-titanium mare basalt composition through an arbitrarily chosen series of partial equilibrium and fractional crystallization experiments on basalt 70017. The liquid line of descent leading to immiscibility at 994 C is characterized by enrichment of FeO, K2O, SiO2, and MnO and depletion of MgO and TiO2 in the residual liquids. The composition of the residual liquid at the onset of immiscibility is ferrobasaltic, and the initial appearance of immiscible liquids in the form of silica-rich spherules is in the vicinity of plagioclase-liquid contacts. The integrated bulk composition of the areas of finely exsolved liquids indicates that the trend of the liquid line of descent is at a small angle to the tie lines joining the two liquids.

Rutherford, M. J.↗
NASA NTRS1974

Regolith compositions from the Apollo 17 mission

An investigation of the chemical, mineralogical, and petrographic data from six Apollo 17 regolith samples is summarized. The samples from the center of the Taurus-Littrow valley are very similar in composition and consist of mare basalt and a minor admixture (about 25%) of plagioclase-rich material. The material from Station 9 (Van Serg Crater) contains much less basalt and more breccia and are higher in Al2O3 and lower in TiO2 and FeO than the other mare sites. The chemical compositions of the samples from the North Massif, the South Massif, and the light mantle believed to be of landslide origin, are very similar and correspond to an olivine norite; the relatively high K2O and P2O5 content indicate the presence of a KREEP component. Additional results are described in detail.

Mason, B.↗
NASA NTRS1976

Coatings for mullite insulation

Series of coatings provides hard, impermeable, waterproof layer. Inclusion of color oxides imparts high emittance to surface. Refractory fillers investigated include TiO2, BaO.ZrO2, SrO.TiO2 ziron, spodumene, petalite, and kryptonite. Colorants include Cr2O3, NiO, and CoO.

Bolinger, P. N.↗
NASA NTRS1975

Recent advancements in low cost solar cell processing

A proof-of-concept solar cell process has been developed that is adaptable to automation. This involved the development of a new contact system, a new antireflection coating system, a drift field cell design and a new contoured surface treatment. All these processes are performed without the use of vacuum chambers and expensive masking techniques, thus providing the possibility of reduced costs by automation using conventional semiconductor processing machinery. The contacts were printed on the cells by conventional silk screen machinery. The P(+) back field was formed by diffusing in aluminum from a printed aluminum back contact. The antireflection coating was formed by spinning on and baking a TiO2-SiO2 glass film. Air-mass-zero efficiencies of over 10% were achieved using this completely vacuum-free process.

Ralph, E. L.↗