Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermoelectric effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Topological Nernst and topological thermal Hall effect in rare-earth kagome ScMn 6 Sn 6

Thermal and thermoelectric measurements are known as powerful tools to uncover the physical properties of quantum materials due to their sensitivity towards the scattering and chirality of heat carriers. We use these techniques to confirm the presence of momentum and real-space topology in ScMn 6 Sn 6 . There is an unconventional dramatic increase in the Seebeck coefficient on entering the transverse conical spiral (TCS) state below $T$ = 200 K, suggesting an unusual scattering of heat carriers. In addition, the observed anomalous thermal Hall effect and the anomalous Nernst effect indicate nonzero Berry curvature in k space. Furthermore, we identify a significant topological contribution to the thermal Hall and Nernst signals in the TCS phase revealing the impacts of real-space Berry curvature. We discuss the presence of the topological thermal Hall effect and topological Nernst effect in the diverse HfFe 6 Ge 6 family. In conclusion, this study illustrates the importance of transverse thermal and thermoelectric measurements to investigate the origin of topological transport in the noncoplanar magnetic phases in this family of kagome metals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Hybridization-driven strong anharmonicity in Yb-filled skutterudites

A high-pressure study of the structural and thermal transport properties is carried out on one of the most efficient filled skutterudites, $\mathrm{Yb_{0.3}Co_4Sb_{12}}$, to understand the relatively low thermal conductivity behavior in this family. By combining x-ray diffraction and Raman scattering measurements, we detect a phase transition at around 12.4 GPa. The mode Grüneisen parameters of the observed phonon modes are obtained from the determined bulk modulus and the phonon frequency shifts with pressure. The strong anharmonicity in this material is demonstrated by the obtained large average Grüneisen parameter. We also find the depressed group velocity within the low-frequency range, the flat guest mode avoided crossing with the acoustic-phonon mode, and the significant contribution of optical phonons. The hybridization of the guest atom and host lattice and the related enhanced anharmonicity are suggested to account for the low lattice thermal conductivity in the studied system. So, these findings provide new insight into how phonon-phonon interactions lower lattice thermal conductivity in this important thermoelectric family.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

Abstract Thermoelectric materials generate electric energy from waste heat, with conversion efficiency governed by the dimensionless figure of merit, ZT. Single-crystal tin selenide (SnSe) was discovered to exhibit a high ZT of roughly 2.2–2.6 at 913 K, but more practical and deployable polycrystal versions of the same compound suffer from much poorer overall ZT, thereby thwarting prospects for cost-effective lead-free thermoelectrics. The poor polycrystal bulk performance is attributed to traces of tin oxides covering the surface of SnSe powders, which increases thermal conductivity, reduces electrical conductivity and thereby reduces ZT. Here, we report that hole-doped SnSe polycrystalline samples with reagents carefully purified and tin oxides removed exhibit an ZT of roughly 3.1 at 783 K. Its lattice thermal conductivity is ultralow at roughly 0.07 W m –1 K –1 at 783 K, lower than the single crystals. The path to ultrahigh thermoelectric performance in polycrystalline samples is the proper removal of the deleterious thermally conductive oxides from the surface of SnSe grains. These results could open an era of high-performance practical thermoelectrics from this high-performance material.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Giant anomalous Nernst signal in the antiferromagnet YbMnBi 2

A large anomalous Nernst effect (ANE) is crucial for thermoelectric energy conversion applications because the associated unique transverse geometry facilitates module fabrication. Topological ferromagnets with large Berry curvatures show large ANEs; however, they face drawbacks such as strong magnetic disturbances and low mobility due to high magnetization. Herein, we demonstrate that YbMnBi 2 , a canted antiferromagnet, has a large ANE conductivity of ~10 A m –1 K –1 that surpasses large values observed in other ferromagnets (3–5 A m –1 K –1 ). The canted spin structure of Mn guarantees a non-zero Berry curvature, but generates only a weak magnetization three orders of magnitude lower than that of general ferromagnets. The heavy Bi with a large spin–orbit coupling enables a large ANE and low thermal conductivity, whereas its highly dispersive p x/y orbitals ensure low resistivity. The high anomalous transverse thermoelectric performance and extremely small magnetization make YbMnBi 2 an excellent candidate for transverse thermoelectrics.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Formulation of 8-moment plasma transport with application to the Nernst effect

8-moment plasma models using two different distribution functions are used to study the Nernst effect and heat transport in dense plasma. These models are presented in hyperbolic form in contrast to traditional parabolic systems derived from perturbing the distribution function, as in Braginskii [Rev. Plasma Phys. 1, 205 (1965)]. The hyperbolic moment formulation can be solved implicitly in time with straightforward and fast local solvers. The numerical implementation of 8-moment models with the relaxation method in the PERSEUS code is also presented. To test 8-moment PERSEUS compared to Braginskii’s transport equations, a verification test for the Nernst thermomagnetic wave by Velikovich et al. [Phys. Plasmas 26, 112702 (2019)] is performed that confirms the presence of the same physics, but with slight differences in the transport coefficients, which are tabulated in the limits of high and low magnetization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Controlling solute channel formation using magnetic fields

Solute channel formation introduces compositional and microstructural variations in a range of processes, from metallic alloy solidification, to salt fingers in ocean and water reservoir flows. Applying an external magnetic field interacts with thermoelectric currents at solid/liquid interfaces generating additional flow fields. This thermoelectric (TE) magnetohydrodynamic (TEMHD) effect can impact on solute channel formation, via a mechanism recently drawing increasing attention. To investigate this phenomenon, we combined in situ synchrotron X-ray imaging and Parallel-Cellular-Automata-Lattice-Boltzmann based numerical simulations to study the characteristics of flow and solute transport under TEMHD. Observations suggest the macroscopic TEMHD flow appearing ahead of the solidification front, coupled with the microscopic TEMHD flow arising within the mushy zone are the primary mechanisms controlling plume migration and channel bias. Two TE regimes were revealed, each with distinctive mechanisms that dominate the flow. Further, we show that grain orientation modifies solute flow through anisotropic permeability. These insights led to a proposed strategy for producing solute channel-free solidification using a time-modulated magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Linear thermomagnetic energy harvester for low-grade thermal energy harvesting

Low-grade thermal energy, either from waste heat or from natural resources, constitutes an enormous energy reserve that remains to be fully harvested. Harvesting low-grade heat is challenging because of the low Carnot efficiency. Among various thermal energy harvesting mechanisms available for capturing low-grade heat (temperature less than 100 degrees C), the thermomagnetic effect has been found to be quite promising. In this study, we demonstrate a scalable thermomagnetic energy harvester architecture that exhibits 140% higher power density compared to the previously published spring-mass designs. The alternating force required to oscillate the thermomagnetic mass is generated through the interaction between two magnetic forces in opposite directions. We employed numerical modeling to illustrate the behavior of a thermomagnetic device under different operating conditions and to obtain the optimal hot-side and cold-side temperatures for continuous mode operations. A miniaturized thermomagnetic harvester was fabricated and experiments were conducted to systematically evaluate the performance. The prototype was found to exhibit an oscillation frequency of 0.33 Hz, a work output of 0.6 J/kg/cycle, and a power density of 0.2 W/kg of gadolinium under the temperature difference of 60 K.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Large anomalous Nernst and inverse spin-Hall effects in epitaxial thin films of kagome semimetal Mn 3 Ge

Synthesis of crystallographically well-defined thin films of topological materials is important for unraveling their mesoscale quantum properties and for device applications. Mn 3 Ge , an antiferromagnetic Weyl semimetal with a chiral magnetic structure on a kagome lattice, is expected to have enhanced Berry curvature around Weyl nodes near the Fermi energy, leading to large anomalous Hall/Nernst effects and a large spin-Hall effect. Using magnetron sputtering, we have grown epitaxial thin films of hexagonal D 0 19 Mn 3 Ge that are flat and continuous. Large anomalous Nernst and inverse spin-Hall effects are observed in thermoelectric and spin-pumping devices. The anomalous Nernst signal in our Mn 3 Ge films is estimated to be 0.1 μV/K and is comparable to that in ferromagnetic Fe, despite Mn 3 Ge having a weak magnetization of ~ 3.5 m μ B / Mn at room temperature. In this work, the spin-mixing conductance is 90.5 nm – 2 at the Py / Mn 3 Ge interface, and the spin-Hall angle in Mn 3 Ge is estimated to be about eight times of that in Pt.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Effect of high-temperature annealing on the microstructure and thermoelectric properties of GaP doped SiGe

Annealing of GaP doped SiGe will significantly alter the thermoelectric properties of the material resulting in increased performance as measured by the figure of merit Z and the power factor P. The microstructures and corresponding thermoelectric properties after annealing in the 1100 to 1300 C temperature range have been examined to correlate performance improvement with annealing history. The figure of merit and power factor were both improved by homogenizing the material and limiting the amount of cross-doping. Annealing at 1215 C for 100 hr resulted in the best combination of thermoelectric properties with a resultant figure of merit exceeding 1x10 to the -3 deg C to the -1 and a power factor of 44 microW/cm/deg C sq for the temperature range of interest for space power: 400 to 1000 C.

Draper, Susan L.↗
DOE OSTI2020

Spin-Dependent Thermoelectric Power of Nanoislands

The Seebeck effect explains the generation of electric voltage as a result of a temperature gradient. Its efficiency, defined as the ratio of the generated electric voltage to the temperature difference, is sensitive to local inhomogeneities that alter the scattering rate and the density of the conduction electrons. Spin-polarized Seebeck tunneling generates a distinct thermovoltage in spin-up and spin-down charge transport channels, which, as a key to spin caloritronics, focuses on transport phenomena related to spin and heat. Here, we report spatially resolved measurement of the spin-dependent thermovoltage in a tunneling junction formed by ferromagnetic Co nanoislands and a Ni tip using spin-dependent scanning tunneling thermovoltage microscopy (SP-STVthM). We resolve the nanoscale thermoelectric powers with respect to spin polarization, nanoisland size, stacking order of Co layers on a Cu substrate, and local sample heterogeneities. The observed thermally generated spin voltages are supported by first-principles and model calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A heat flux sensor leveraging the transverse Seebeck effect in elemental antimony

Certain configurations of anisotropic single crystal materials can generate a thermoelectric voltage orthogonal to an induced temperature gradient. This phenomenon is known as the Transverse Seebeck Effect (TSE) and can be leveraged to fabricate simple and robust heat flux sensors. Only a small number of materials have been considered as TSE-based transducers and, among these, few have been developed into sensors with ruggedization against chemical and mechanical degradation. Here, we report on the fabrication and characterization of a rugged TSE-based heat flux sensor using prismatic antimony single crystals. The heat flux sensor was tested under static and dynamic heating scenarios. The sensor has a linear responsivity of 16.8 µV/(W/cm2) to heat fluxes spanning more than two orders of magnitude and a time constant of 4.4 s. The sensor’s response to localized heating, probed with a laser scanning technique, validated that the transduction mechanism is primarily the TSE by ruling out a sizable contribution from the conventional Seebeck effect. Finite element analysis corroborated that components used in the sensor package are the primary determinants of the time constant and the decrement of the responsivity from its theoretical maximum. Design principles that may be applied to elicit a faster transient response or higher responsivity are proposed. Furthermore, the results establish single crystal antimony as a promising transducer material for heat flux measurement systems and demonstrate potential effects of ruggedization on sensor performance.

36 MATERIALS SCIENCE↗
NASA NTRS1971

The effects of radiation on the outer planets grand tour

A handbook is presented which was designed to accompany an oral presentation on the effects of radiation on the outer planets grand tour (OPGT). A summary of OPGT radiation environments expected from natural sources and the radioisotope thermoelectric generators and basic radiation effects and processes are reviewed, and ionization and displacement effects are examined. The presentation summarizes the effects of radiation on miscellaneous spacecraft materials and devices. The annealing and hardening of electronics are described. Special emphasis is placed on microcircuits. Mathematical modeling of circuits affected by radiation and radiation environmental testing are discussed. A review of means of evaluating the performance and correcting failures of irradiated devices is also presented.

Source record↗
DOE OSTI2021

Conformal High-Power-Density Half-Heusler Thermoelectric Modules: A Pathway toward Practical Power Generators

Thermoelectric generators (TEGs) exploiting the Seebeck effect provide a promising solution for waste heat recovery. Among the large number of thermoelectric (TE) materials, half-Heusler (hH) alloys are leading candidates for medium- to high-temperature power generation applications. However, the fundamental challenge in this field has been inhomogeneous material properties at large wafer diameters, insufficient power output from the modules, and rigid form factors of TE modules. This has restricted the transition of TEGs in practical applications for over three decades. Here, we successfully demonstrate large diameter wafers with uniform TE properties, high-power conformal hH TE modules for high-temperature application, and their direct integration on flue gas platforms, such as cylindrical tubes, to form large area flexible TEGs. This new conformal architecture design provides a breakthrough toward medium-/high-temperature TEGs over the conventional BiTe- and polymer-based flexible TEG design. In this work, a variable fill factor and greater flexibility due to the conformal design result in higher device performance as compared to conventional rigid TEG devices. Modules with 72-couple hH legs exhibit a device high-power-density of 3.13 W cm-2 and a total output power of 56.6 W under a temperature difference of 570 degrees C. These results provide a promising pathway toward widespread utilization of thermoelectric technology into the waste heat recovery application and will have a significant impact on the development of practical thermal to electrical converters.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Thermoelectrics: From longitudinal to transverse

Thermoelectric power generation is a promising technology to realize a sustainable society because it directly converts thermal energy into electricity in a solid. Conventional thermoelectric generation is driven by the Seebeck effect, discovered by T.J. Seebeck in 1821, in which a charge current J c is generated in the direction parallel to a temperature gradient ∇T, the longitudinal geometry. Here, the ratio between the generated longitudinal electromotive force and applied ∇T is defined as the Seebeck coefficient. As shown in Figure 1A, a thermoelectric module based on the Seebeck effect typically consists of many pairs (128 for a 12V unit) of p-type and n-type conductors alternately arranged and connected in series. Since the Seebeck coefficient of a p-type (n-type) conductor is positive (negative), the thermopower in each element adds to the total output in the Seebeck module. This configuration is needed to achieve a practical voltage because each element only supplies millivolts but limits the use of thermoelectric generators. The efficiency of thermoelectric generators is characterized by the thermoelectric figure of merit, zT. Despite a 3-fold improvement in zT resulting from materials research over the last two decades, little progress has been made in their practical use; this is ascribed to the technological challenges in contact technology. The contacts on the hot side are subject to thermal degradation. All contacts (512 for a 12V unit) add electrical and thermal contact resistances that reduce the device efficiency to a fraction of that promised by the materials.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Enhanced thermoelectric performance of SnSe by controlled vacancy population

Abstract The thermoelectric performance of SnSe strongly depends on its low-energy electron band structure that provides high density of states in a narrow energy window due to the multi-valley valence band maximum (VBM). Angle-resolved photoemission spectroscopy measurements, in conjunction with first-principles calculations, reveal that the binding energy of the VBM of SnSe is tuned by the population of Sn vacancy, which is determined by the cooling rate during the sample growth. The VBM shift follows precisely the behavior of the thermoelectric power factor, while the effective mass is barely modified upon changing the population of Sn vacancies. These findings indicate that the low-energy electron band structure is closely correlated with the high thermoelectric performance of hole-doped SnSe, providing a viable route toward engineering the intrinsic defect-induced thermoelectric performance via the sample growth condition without an additional ex-situ process. Graphical Abstract

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Anomalous Nernst and Seebeck coefficients in epitaxial thin film Co 2 MnAl x Si 1 - x and Co 2 FeAl

Here we have measured the Seebeck and anomalous Nernst coefficients and corresponding transverse and longitudinal thermoelectric conductivities from 2 to 400 K in thin film (thickness t ~10 nm) Co 2 MnAl x Si 1-x (0 ≤ x ≤ 1) and Co 2 FeAl grown by molecular beam epitaxy (MBE). A large (-14 A m -1 K -1 at 300 K) anomalous component of the transverse thermoelectric conductivity is observed in Co 2 MnAl, especially as contrasted to Co 2 MnSi (0.28 A m -1 K -1 at 300 K). This enhancement is likely due to Weyl points close to the Fermi level of Co 2 MnAl which disappear as x decreases.

36 MATERIALS SCIENCE↗