Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal experience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Thermal barrier coating experience in the gas turbine engine

Thermal Barrier Coatings (TBC), provide thermal insulation and oxidation resistance in an environment consisting of hot combustion gases. TBC's consist of a two layer system. The outer ceramic layer provides good thermal insulation due to the low thermal conductivity of the ceramic coatings used, while the inner metallic bond coat layer provides needed oxidation resistance to the underlying superalloy. Pratt & Whitney has over a decade of experience with several generations of TBC systems on turbine airfoils. This paper will focus on the latest TBC field experience along with a proposed durability model.

Bose, S.↗
NASA NTRS1993

The continuing materials analysis of the thermal control surfaces experiment (S0069)

The long term effects of the natural and induced space environment on spacecraft surfaces are critically important to future spacecraft - including Space Station Freedom. The damaging constituents of this environment include thermal vacuum, solar ultraviolet radiation, atomic oxygen, particulate radiation, and the spacecraft induced environment. The behavior of materials and coatings in the space environment continues to be a limiting technology for spacecraft and experiments. The Thermal Control Surfaces Experiment (TCSE) was flown on the National Aeronautics and Space Administration (NASA) Long Duration Exposure Facility (LDEF) to study these environmental effects on surfaces-particularly on thermal control surfaces. The TCSE was a comprehensive experiment that combined in-space measurements with extensive pre- and post-flight analyses of thermal control surfaces to determine the effects of exposure to the low Earth orbit space environment. The TCSE is the first space experiment to directly measure the total hemispherical reflectance of thermal control surfaces in the same way they are routinely measured in the laboratory. The trend analyses of selected coatings performed as part of the continuing post-flight analysis of the TCSE are described. A brief description of the TCSE and its mission on LDEF are presented. There are several publications available that describe the TCSE, it's mission on LDEF, and initial results in greater detail. These are listed in the TCSE Bibliography.

Wilkes, Donald R.↗
NASA NTRS1995

Whisker/Cone growth on the thermal control surfaces experiment no. S0069

An unusual surface 'growth' was found during scanning electron microscope (SEM) investigations of the Thermal Control Surface Experiment (TCSE) S0069 front thermal cover. This 'growth' is similar to the cone type whisker growth phenomena as studied by G. K. Wehner beginning in the 1960's. Extensive analysis has identified the most probable composition of the whiskers to be a silicate type glass. Sources of the growth material are outgassing products from the experiment and orbital atomic oxygen, which occurs naturally at the orbital altitudes of the LDEF mission in the form of neutral atomic oxygen. The highly ordered symmetry and directionality of the whiskers are attributed to the long term (5.8 year) stable flight orientation of the LDEF.

Zwiener, James M.↗
NASA NTRS1989

A fluid flow analysis for convective thermal control of flight experiments

A method for thermally analyzing convectively cooled flight experiments is presented. A three-dimensional fluid flow analysis code is used to optimize air circulation patterns and to predict air velocities in thermally critical areas. The analysis results are compared with the performance characteristics of a typical isothermal free jet, and good agreement is found between velocity profiles and radial distributions for downstream flow mixing. Predicted air velocities from the fluid analysis are used to calculate forced convection coefficients for the flight experiment, and the coefficients are used in a finite difference thermal analysis code to describe the response of air temperature and heat loss for the Lidar Atmospheric Sensing Experiment during transient flight profiles. Recommendations are made for the future design of convectively cooled flight experiments.

Killough, Brian D.↗
NASA NTRS1992

Unusual materials effects observed on the thermal control surfaces experiment (S0069)

A number of unusual effects were observed on the Thermal Control Surfaces Experiment (TCSE) test samples, front cover, and structural components. These effects include atomic oxygen (AO) texturing of the exposed surface of the silver Teflon (Ag/FEP) thermal control material, 'brownish' discoloration of the Ag/FEP material, changes in fluorescence of thermal control paint samples, and meteoroid/debris impact effects on silver Teflon.

Zwiener, James M.↗
NASA NTRS1982

Thermal system engineering experiment

The technical feasibility of a solar thermal collector to provide process steam in an industrial environment was determined. The form of the experiment was an industrial field test.

Source record↗
NASA NTRS1975

Performance analysis of the advanced thermal control flight experiment

Flight data for the different operational modes of the advanced thermal control flight experiment are presented and compared with ground-test data. Performance of the system with feedback control is compared to performance without such control, and performances of the individual components are analyzed. Finally, changes in performance from launch through March 31, 1975, are discussed and analyzed. All thermal control components are performing as predicted for the existing flight environment. However, the daily reservoir and radiator temperatures during peak solar input are greater than those experienced in ground acceptance tests. These increased temperatures have resulted in a loss of control by the feedback-controlled variable-conductance heat pipe for several hours around the period of maximum insolation. The higher temperatures are apparently due to contamination and/or degradation of the second-surface mirrors which cover the reservoir and radiator.

Kirkpatrick, J. P.↗
NASA NTRS1991

Unusual materials effects observed on the thermal control surfaces experiment (S0069)

A number of unusual effects were observed on the Thermal Control Surface Experiment (TCSE) test samples, front cover, and structural components. These include induced UV fluorescence, the migration and degradation of KRS-5 materials, atomic oxygen effects, contamination, texturing, discoloration, and meteoroid/debris impact. LDEF (Long Duration Exposure Facility) mission induced fluorescence was observed on several TCSE samples. Similar fluorescence was observed on LDEF leading edge materials from Experiment A0114.

Zwiener, James M.↗
DOE OSTI2021

Experiment Based Superposition Thermal Modeling of Laser Powder Bed Fusion

This paper evaluates experiment-based superposition thermal modeling for Laser Powder Bed Fusion (LPBF) with a pulsed laser. An analytical pulsed laser thermal model establishes the modeling procedure. The framework inverts a powder bed’s single pulse temperature response from experimental spatiotemporal Short-Wave Infrared (SWIR) camera data. Superimposing this response along a scan path simulates multi-pulse LPBF. Results show the experimentally informed superposition model rapidly and accurately predicts a layer’s temperature history. The model has applications in correction of thermally driven LPBF errors and in-situ part qualification.

Lough, Cody↗
NASA NTRS1992

Thermal Energy Storage Flight Experiment in Microgravity

The Thermal Energy Storage Flight Experiment was designed to characterize void shape and location in LiF-based phase change materials in different energy storage configurations representative of advanced solar dynamic systems. Experiment goals and payload design are described in outline and graphic form.

Namkoong, David↗
NASA NTRS2018

Copper-Water and Hybrid Aluminum-Ammonia Heat Pipes for Spacecraft Thermal Control Applications

Copper-water heat pipes are commonly used for thermal management of electronics systems on earth and aircraft, but have not been used in spacecraft thermal control applications to date, due to the satellite industry's requirement that any device or system be successfully tested in a microgravity environment prior to adoption. Recently, Advanced Cooling Technologies Inc., (ACT), NASA Marshall Space Flight Center, and the International Space Station office at NASA's Johnson Space Center demonstrated flight heritage in Low-Earth Orbit. The testing was conducted aboard the International Space Station (ISS) under the Advanced Passive Thermal eXperiment (APTx) project. The heat pipes were embedded in a high conductivity (HiK"TM") aluminum base plate and subject to a variety of thermal tests over a temperature range of -10 to 38 ºC for a ten-day period. Results showed excellent agreement with both predictions and ground tests. In addition, novel hybrid wick aluminum-ammonia heat pipes are developed to handle heat flux requirements for spacecraft thermal control applications. The 5-10 W/cm2 heat density limitation of aluminum-ammonia grooved heat pipes has been a fundamental limitation in the current design for space applications. The recently demonstrated 50 W/cm2 capability of the hybrid high heat flux heat pipes provides a realistic means of managing the high heat density anticipated for the next generation space designs.

Ababneh, Mohammed T.↗
NASA NTRS2018

Copper-Water and Hybrid Aluminum-Ammonia Heat Pipes for Spacecraft Thermal Control Applications

Copper-water heat pipes are commonly used for thermal management of electronics systems on earth and aircraft, but have not been used in spacecraft thermal control applications to date, due to the satellite industry's requirement that any device or system be successfully tested in a microgravity environment prior to adoption. Recently, Advanced Cooling Technologies Inc., (ACT), NASA Marshall Space Flight Center, and the International Space Station office at NASA's Johnson Space Center demonstrated flight heritage in Low-Earth Orbit. The testing was conducted aboard the International Space Station (ISS) under the Advanced Passive Thermal eXperiment (APTx) project. The heat pipes were embedded in a high conductivity (HiK "TM") aluminum base plate and subject to a variety of thermal tests over a temperature range of -10 to 38 C for a ten-day period. Results showed excellent agreement with both predictions and ground tests. In addition, novel hybrid wick aluminum-ammonia heat pipes are developed to handle heat flux requirements for spacecraft thermal control applications. The 5-10 W/cm2 heat density limitation of aluminum-ammonia grooved heat pipes has been a fundamental limitation in the current design for space applications. The recently demonstrated 50W/cm2 capability of the hybrid high heat flux heat pipes provides a realistic means of managing the high heat density anticipated for the next generation space designs.

Ababneh, Mohammed T.↗
NASA NTRS1994

Magnetic field waves at Uranus

The research efforts funded by the Uranus Data Analysis Program (UDAP) grant to the Bartol Research Institute (BRI) involved the study of magnetic field waves associated with the Uranian bow shock. Upstream wave studies are motivated as a study of the physics of collisionless shocks. Collisionless shocks in plasmas are capable of 'reflecting' a fraction of the incoming thermal particle distribution and directing the resulting energetic particle motion back into the upstream region. Once within the upstream region, the backward streaming energetic particles convey information of the approaching shock to the supersonic flow. This particle population is responsible for the generation of upstream magnetic and electrostatic fluctuations known as 'upstream waves', for slowing the incoming wind prior to the formation of the shock ramp, and for heating of the upstream plasma. The waves produced at Uranus not only differed in several regards from the observations at other planetary bow shocks, but also gave new information regarding the nature of the reflected particle populations which were largely unmeasurable by the particle instruments. Four distinct magnetic field wave types were observed upstream of the Uranian bow shock: low-frequency Alfven or fast magnetosonic waves excited by energetic protons originating at or behind the bow shock; whistler wave bursts driven by gyrating ion distributions within the shock ramp; and two whistler wave types simultaneously observed upstream of the flanks of the shock and argued to arise from resonance with energetic electrons. In addition, observations of energetic particle distributions by the LECP experiment, thermal particle populations observed by the PLS experiment, and electron plasma oscillations recorded by the PWS experiment proved instrumental to this study and are included to some degree in the papers and presentations supported by this grant.

Smith, Charles W.↗
NASA NTRS2003

Preliminary Thermal Stress Analysis of a High-Pressure Cryogenic Storage Tank

The thermal stresses on a cryogenic storage tank strongly affect the condition of the tank and its ability to withstand operational stresses. These thermal stresses also affect the growth of any surface damage that might occur in the tank walls. These stresses are particularly of concern during the initial cooldown period for a new tank placed into service, and during any subsequent thermal cycles. A preliminary thermal stress analysis of a high-pressure cryogenic storage tank was performed. Stresses during normal operation were determined, as well as the transient temperature distribution. An elastic analysis was used to determine the thermal stresses in the inner wall based on the temperature data. The results of this elastic analysis indicate that the inner wall of the storage tank will experience thermal stresses of approximately 145,000 psi (1000 MPa). This stress level is well above the room-temperature yield strength of 304L stainless steel, which is about 25,000 psi (170 MPa). For this preliminary analysis, several important factors have not yet been considered. These factors include increased strength of 304L stainless steel at cryogenic temperatures, plastic material behavior, and increased strength due to strain hardening. In order to more accurately determine the thermal stresses and their affect on the tank material, further investigation is required, particularly in the area of material properties and their relationship to stress.

Baker, J. Mark↗
NASA NTRS1979

Advanced Thermal control Flight Experiment (ATFE)

A comprehensive description of the design and performance of the Advanced Thermal Control Flight Experiment (ATFE) is presented. The ATFE studied in a space environment for five years the steady state, transient ground and flight performance of (1) a thermal diode heat pipe, (2) a phase change material, and (3) a feedback controlled variable conductance heat pipe. It was found that all were flight worthy and highly reliable.

Source record↗
NASA NTRS2012

Wind-Tunnel Balance Characterization for Hypersonic Research Applications

Wind-tunnel research was recently conducted at the NASA Langley Research Center s 31-Inch Mach 10 Hypersonic Facility in support of the Mars Science Laboratory s aerodynamic program. Researchers were interested in understanding the interaction between the freestream flow and the reaction control system onboard the entry vehicle. A five-component balance, designed for hypersonic testing with pressurized flow-through capability, was used. In addition to the aerodynamic forces, the balance was exposed to both thermal gradients and varying internal cavity pressures. Historically, the effect of these environmental conditions on the response of the balance have not been fully characterized due to the limitations in the calibration facilities. Through statistical design of experiments, thermal and pressure effects were strategically and efficiently integrated into the calibration of the balance. As a result of this new approach, researchers were able to use the balance continuously throughout the wide range of temperatures and pressures and obtain real-time results. Although this work focused on a specific application, the methodology shown can be applied more generally to any force measurement system calibration.

Lynn, Keith C.↗