Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TTT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Numerical Investigation of C L,max Prediction on the NASA High-Lift Common Research Model

An assessment of a Hybrid RANS/LES (HRLES) approach for C L,max prediction is presented for the NASA High-Lift Common Research Model (CRM-HL). Both free air and wind tunnel configurations of the CRM-HL are investigated and the results are compared to the QinetiQ wind tunnel experiments and two other numerical approaches: Reynolds Averaged Navier-Stokes (RANS) and Wall-Modeled Large Eddy Simulations (WMLES). For the free-air configuration, HRLES is shown to address some of the known shortcomings with RANS and prevent inboard and outboard flow separation particularly in the region of C L,max and post-stall. To achieve these improvements over RANS, LES-appropriate grids and numerical discretizations are required. It was also found that when applying HRLES to a RANS best practice grid and numerics that the HRLES method significantly underperformed RANS. For the in-tunnel configuration, HRLES showed good agreement with the loads, surface pressure and oil-flow photographs obtained in the experiment. HRLES was able to improve upon the RANS simulations, which showed a sharp loss of lift at the two highest angles-of-attack due to large scale inboard and outboard separation on the wing, by correctly predicting the corner flow separation and showing remarkably close agreement in the flow topologies with the experiment.

TTT↗
NASA NTRSDate not supplied

Scale Resolving Simulations of Contra Rotating Open Rotor Noise Prediction

The development of breakthrough open-rotor propulsion systems that meet performance, fuel efficiency, and noise requirements for commercial viability relies heavily on the availability of reliable and computationally efficient aerodynamic performance and noise prediction tools.This investigation showcases the proficiency of the structured curvilinear overset grid Computational Fluid Dynamics solver implemented in the Launch, Ascent, and Vehicle Aerodynamics framework for predicting the aerodynamic and aeroacoustic characteristics of a Contra-RotatingOpen Rotor propulsion system. Additionally, the study includes comprehensive sensitivity analyses employing a Hybrid Reynolds-Averaged Navier-Stokes/Large Eddy Simulation - based scale-resolving turbulence closure treatment. The computed results are validated through comparison with existing experimental measurements.

ARMD↗
NASA NTRSDate not supplied

Simulating Transonic Buffet Aerodynamics for the Boeing Transonic Truss-Braced Wing Aircraft

The flow past the Boeing Transonic Truss-Braced Wing (TTBW) aircraft is simulated with a Hybrid Reynolds-Averaged Navier Stokes Large-Eddy Simulations (HRLES) turbulence modeling approach to study transonic buffet onset and evaluate the predictive capability of the numerical approach. All simulations used structured overset curvilinear grids for the free-air configuration, with all simulations performed using the Launch, Ascent, and Vehicle Aerodynamics (LAVA) computational framework. Aerodynamic loads and surface pressure obtained from the HRLES solutions are compared to results from unsteady RANS (URANS) and experiments conducted at NASA Ames 11-by 11-Foot Transonic Wind Tunnel. Overall good agreement is obtained in the predicted loads and surface pressure. Unsteady pressure data from HRLES and URANS simulations is utilized to compute power spectral density (PSD) to predict transonic buffet onset and compared to the Kulite data obtained from the experiment. Comparisons of the PSD spectrum also show reasonable agreement with the wind tunnel data, with HRLES and URANS predicting buffet onset at a slightly earlier angle-of-attack than the experiment.

AATT↗
NASA NTRSDate not supplied

Computational Aerodynamics Study of the Lift+Cruise VTOL Concept Vehicle Components

This paper describes a building-block approach for high-fidelity computational fluid dynamic simulations of NASA’s Lift+Cruise (L+C) Vertical Take-off and Landing (VTOL) concept vehicle. The Reynolds-Averaged Navier-Stokes (RANS) equations are solved on overset structured grids using OVERFLOW. For these analyses, overset meshes are generated using recently developed automated meshing tools. A baseline study is initially performed on the vehicle fuselage with wings and tails. Vehicle components such as pylons and gears are then added individually and together to study incremental component aerodynamic effects. The results from this study are also used to demonstrate the capabilities of the automatic meshing tools for performing rapid computational analyses.

RVLT↗
NASA NTRSDate not supplied

Noise Prediction of Multi-stream Internally Mixed Jets with External and Internal Plugs using Large-Eddy Simulation

This paper presents results from ongoing research on jet noise prediction using wall-modeled large eddy simulations (WMLES) conducted within the Launch Ascent and Vehicle Aerodynamics (LAVA) computational framework. The study primarily focuses on the aeroacoustic implications of multi-stream nozzle configurations with internal mixing and both internal and external plugs, at a Reynolds number of 1×10 6 based on the nozzle exit diameter. While internal mixing nozzles have long been considered for jet noise reduction, the complexities of their impact on overall noise levels remain insufficiently understood. This research applies established best practices for WMLES to these complex nozzle configurations, aiming to assess their efficacy and identify limitations in accurately predicting noise behaviors. Through detailed comparisons with experimental data obtained from NASA’s Glenn Research Center, initial findings underscore the challenges inherent in current simulation practices when confronted with intricate geometric and operational conditions. Responding to these challenges, the study explores innovative computational approaches to rectify discrepancies noted between experimental outcomes and CFD predictions. Once example is the introduction of a resonating sound source in the simulation environment to mimic potential unobserved acoustic phenomena.A second example is the strategic modifications to the geometry of external plugs to account for real-world deformations caused by heating and gravity. These novel strategies aim to enhance the accuracy and reliability of noise predictions from supersonic jets, advancing our understanding and capability to effectively reduce jet noise in commercial supersonic aircraft

CST↗
NASA NTRSDate not supplied

Fan Noise Predictions of the NASA Source Diagnostic Test using Unsteady Simulations with LAVA Part II - Tonal and Broadband Noise Assessment

The NASA Source Diagnostic Test (SDT) campaign experimental data is used for validation of a sliding mesh technique recently implemented within the Launch, Ascent, and Vehicle Aerodynamics computational framework for time-accurate simulation of rotating fans. The far-field acoustics are analyzed in this work, building upon the aerodynamic validation studies previously published in Part I. Two modeling approaches are explored: the unsteady Reynolds-averaged Navier Stokes (uRANS) with the negative Spalart-Allmaras (SA-neg) turbulence model closure, and a hybrid Reynolds-averaged Navier Stokes/large-eddy simulation (RANS/LES) paradigm employing a zonal detached-eddy simulation (ZDES) closure with enhanced shielding protection. Two convective flux scheme approaches with different dissipation properties are also explored with ZDES. The Ffowcs-Williams and Hawkings (FW-H) permeable surface approach is used for propagation of the near-field acoustics to the far-field microphone locations. This work analyzes the low-speed (approach) condition, characterized by a fan rotation speed of 7808 rotations-per-minute (RPM). Three different grid levels ranging between 200 million and 1.1 billion grid points are considered. Results show good prediction of the broadband noise levels at sideline angles ranging between 70° and 110°. The forward arc observers show an under-prediction of the overall sound pressure levels (OASPL) even at the fine grid level. A breakdown of the inlet and exhaust contributions reveals a steep drop-off in the broadband noise levels past a blade-passing frequency (BPF) of 1.5, potentially caused by a lack of resolved small-scale turbulent fluctuations in the interstage region. Past 110° the OASPL are over-predicted by up to 10 dB due to an over-prediction of the low-frequency broadband noise levels in the aft arc. The detuning of BPF2 caused by small deviations in the blade stagger angle around the wheel is captured, and a corresponding decrease in the sound power level for this cut-on tone is observed.

AATT↗
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations of a Swept Wing with Leading-Edge Ice

The aerodynamic performance of a swept wing derived from the Common Research Model wing with high-fidelity and smooth leading-edge ice shapes is evaluated using wall-modeled large-eddy simulations. Two mesh paradigms are considered within the Launch, Ascent, and Vehicle Aerodynamics framework: structured hybrid curvilinear body-fitted/immersed-boundary and unstructured Voronoi. The curvilinear approach models the effect of the ice on the flow through penalty terms and the Voronoi strategy includes the ice representation directly in the mesh.Aerodynamic loads, surface pressure profiles, and skin-friction streamlines are compared against experimental results collected at the Wichita State University wind tunnel at a Mach number of 0.18 and a Reynolds number per mean aerodynamic chord of 1.6 million. For the curvilinear simulations with high-fidelity ice, results are sensitive to spanwise mesh resolution near the leading edge, where insufficient spanwise resolution leads to a spanwise running vortexaft of the high-fidelity ice, which is partially removed with increasing spanwise resolution. For the Voronoi simulations with high-fidelity ice, refining the mesh led to good convergence towards the experimental results with the best case demonstrating a maximum discrepancy of three lift counts relative to the experiment across a range of angles of attack from about 5 to 24 degrees, validating the shrink-wrapping procedure used for the ice. For the smooth ice, the curvilinear approach consistently under-predicted the upper surface suction leading to an under-prediction in lift, but did not demonstrate the pronounced over-prediction in upper surface suction near the leading edge observed in the Voronoi simulations.

AATT↗
NASA NTRSDate not supplied

Advances in Automation of Overset Structured Volume Mesh Generation and Domain Connectivity

Automation of overset structured surface mesh generation has recently been accomplished by the creation of face, edge, and node meshes based on Boundary Representation solids as the geometry input. The current work continues the automation effort in overset volume mesh generation and domain connectivity based on the auto-generated surface meshes. All near-body curvilinear volume meshes are automatically generated using hyperbolic methods. Automation of this step is enabled by appropriate surface grid point distribution, and selection of boundary-splay and smoothing parameters based on concave and convex surface features. The off-body domain is covered by two automatically generated grid systems. The first contains a single Cartesian mesh with a uniform core enclosing all near-body volume meshes and stretched layers that extend to the far field, while the second consists of a set of small stretched Cartesian grids covering pockets of off-body orphan points. With high quality mesh overlap mostly guaranteed by the surface meshing scheme, orphan points that need to be covered by the second Cartesian mesh system are located away from the fine grid spacing region near the wall. Using line-segment and ray-pierce tests against the surface grids, hole-cutting is accomplished on both near and off-body volume grids resulting in appropriate clearances from the wall. The complete mesh generation automation process is demonstrated on five test cases where flow solutions are also computed and compared with solutions obtained using other methods.

TTT↗
NASA NTRSDate not supplied

Towards Aerodynamic Shape Optimization Using an Immersed Boundary Overset Grid Method

Traditional Reynolds-averaged Navier-Stokes grid methods applied to aerodynamic shapeoptimization can struggle with the deformation of surface and volume grids at componentintersections, such as at wing-fuselage junctions. To overcome this, we propose an approachwhich utilizes curvilinear overset grids for the discretization of the domain, with the presenceof the body modeled using an immersed boundary method. This approach handles complexgeometries without the need for their explicit integration into the grid. The goal of this approachis to reduce grid generation time and allow for greater geometric freedom for component-basedaerodynamic shape optimization. Two different methods are presented: a source-term-basedand a ghost-node-based immersed boundary method. Flow analyses and adjoint solutionsobtained using the proposed methods show promising comparisons with standard body-fittedgrid methods. Preliminary aerodynamic shape optimization results obtained using one of theimmersed boundary methods are also presented.

TTT↗
NASA NTRSDate not supplied

Exploring the Impact of Sideslip Angle on Acoustic Predictions of an Open Rotor System Using Scale-Resolving Simulations

The development of innovative open-rotor propulsion systems that meet performance, fuel efficiency, and noise standards for commercial use depends significantly on the availability of reliable and computationally efficient tools for aerodynamic performance and noise prediction.This investigation demonstrates the capability of the structured curvilinear overset gridComputational Fluid Dynamics solver within the Launch, Ascent, and Vehicle Aerodynamics framework to predict the aerodynamic and aeroacoustic characteristics of a Contra-RotatingOpen Rotor propulsion system under various sideslip angles. In this publication, results obtained using a Hybrid Reynolds-Averaged Navier-Stokes/Large Eddy Simulation-based scale-resolving turbulence closure approach are validated against existing experimental measurements including aerodynamic loads, moments, and tones.

AATT↗
NASA NTRSDate not supplied

Wall-Modeled Large Eddy Simulations of Transonic Buffet Over a Supercritical Airfoil

A series of scale-resolving simulations of flow over the ONERA OAT15A airfoil have been performed at an angle of attack of 3.5◦, just past the onset of buffet. The focus of this study is to document the sensitivity of the wall-modeled large eddy simulation (WMLES) methodology for curvilinear structured overset grids within the Launch, Ascent, and Vehicle Aerodynamics (LAVA) framework to mesh spacing, mesh distribution, and domain size. A secondary purpose of the study is to compare the results from WMLES to unsteady Reynolds-averaged Navier Stokes (URANS) simulations and hybrid RANS-LES (HRLES) within the same LAVA solver framework. The study provides a unique perspective regarding comparisons between different turbulence modeling approaches, time-integration methods, and computational performance since many of the same numerical routines are used for all three types of simulations. The results are compared with experiments and previous numerical studies of the same geometry and flow conditions.

TTT↗