Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRUNCATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

CFD Simulations of the Truncated IHF Semi-Elliptical Nozzle Flow: Convective Calibration Plate

This paper reports computational simulations of a high-enthalpy panel test facility at NASA Ames Research Center. The recently developed facility configuration uses a truncated version of an existing semi-elliptical nozzle in the 60-MW Interaction Heating Facility, and it provides testing capability for panel test articles as large as 43.2 cm x 43.2 cm (17 in x 17 in). A water-cooled calibration plate, which is attached to the semi-elliptical nozzle bottom surface and instrumented with twenty Gardon-gage heat flux calorimeters and twelve pressure gages, is used to characterize the convective heating environment over the panel test articles. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, and flowfield over panel test articles. Both laminar and turbulent simulations are performed, and the computational results are compared with the calibration plate measurements. Comparisons of computed and measured heat fluxes indicate that the boundary layer in the semi-elliptical nozzle is transitional at certain conditions (relatively higher arc-heater pressures or mass flow rates).

Arc-jets↗
NASA NTRSDate not supplied

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. Ice shape geometries on a full-chord length and hybrid versions of the swept CRM65 wing model were obtained in NASA Icing Research Tunnel and compared. For most test conditions, the overall size and shape of the ice shapes compared well. On the main part of the ice shape, the hybrid model had larger chordwise extent, resulting in wider ice shape. For the scallop ice shapes, the ice shape heights at attachment line location were identical. For conditions that produced rime shape, hybrid model ice shapes were larger overall, even at the attachment line location. The only location where there was more ice on the full chord model was on the lower surface, downstream of where the hybrid model no longer had full-scale leading edge. For the test conditions where ice mass measurements were acquired for both models, the full-chord models had 11-22% less ice mass than on the hybrid wing. These differences were larger and opposite of those predicted from LEWICE 3D ice prediction calculations. Further investigation is needed in order determine the cause of the differences between the full-chord and hybrid models.

Icing↗
NASA NTRSDate not supplied

Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. Ice shape geometries on a full-chord length and hybrid versions of the swept CRM65 wing model were obtained in NASA Icing Research Tunnel and compared. For most test conditions, the overall size and shape of the ice shapes compared well. On the main part of the ice shape, the hybrid model had larger chordwise extent, resulting in wider ice shape. For the scallop ice shapes, the ice shape heights at attachment line location were identical. For conditions that produced rime shape, hybrid model ice shapes were larger overall, even at the attachment line location. The only location where there was more ice on the full chord model was on the lower surface, downstream of where the hybrid model no longer had full-scale leading edge. For the test conditions where ice mass measurements were acquired for both models, the full-chord models had 11-22% less ice mass than on the hybrid wing. These differences were larger and opposite of those predicted from LEWICE 3D ice prediction calculations. Further investigation is needed in order determine the cause of the differences between the full-chord and hybrid models.

Icing↗
NASA NTRSDate not supplied

CFD Simulations of the Truncated IHF Semi-Elliptical Nozzle Flow: Convective Calibration Plate

This paper reports computational simulations of a high-enthalpy panel test facility at NASA Ames Research Center. The recently developed facility configuration uses a truncated version of an existing semi-elliptical nozzle in the 60-MW Interaction Heating Facility, and it provides testing capability for panel test articles as large as 43.2 cm x 43.2 cm (17 in x 17 in). A water-cooled calibration plate, which is attached to the semi-elliptical nozzle bottom surface and instrumented with twenty Gardon-gage heat flux calorimeters and twelve pressure gages, is used to characterize the convective heating environment over the panel test articles. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, and the flowfields over panel test articles. Both laminar and turbulent simulations are performed, and the computational results are compared with the calibration plate measurements. Comparisons of computed and measured heat fluxes indicate that the boundary layer in the semi-elliptical nozzle is transitional at certain conditions (relatively higher arc-heater pressures or mass flow rates).

Arc-jets↗
NASA NTRSDate not supplied

On Characterization of Laminar to Turbulent Transitional Flow in the Truncated IHF Semi-Elliptical Nozzle

This paper reports computational analysis and experimental data to characterize the laminar to turbulent flow transition in a high-enthalpy panel test facility at NASA Ames Research Center. The recently developed facility configuration uses a truncated version of an existing semi-elliptical nozzle in the 60-MW Interaction Heating Facility, and it provides testing capability for panel test articles as large as 43.2 cm x 43.2 cm (17 in x 17 in). A water-cooled calibration plate, which is attached to the semi-elliptical nozzle bottom surface and instrumented with twenty Gardon-gage heat flux calorimeters and twelve pressure gages, is used to characterize the convective heating environment over the panel test articles. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, and the flowfields over panel test articles, and comparisons with the measured test data. Both laminar and turbulent simulations are performed. Constant current studies are performed: the measured data are grouped at the same arc current levels with varying mass flow rates, and they are compared with corresponding computations. For all currents studied, these studies indicate that the semi-elliptical nozzle flow is transitional at relatively higher mass flow rates within the facility operating envelope.

Arc-jets↗
NASA NTRSDate not supplied

On Characterization of Laminar to Turbulent Transitional Flow in the Truncated IHF Semi-Elliptical Nozzle

This paper reports computational analysis and experimental data to characterize the laminar to turbulent flow transition in a high-enthalpy panel test facility at NASA Ames Research Center. The recently developed facility configuration uses a truncated version of an existing semi-elliptical nozzle in the 60-MW Interaction Heating Facility, and it provides testing capability for panel test articles as large as 43.2 cm x 43.2 cm (17 in x 17 in). A water-cooled calibration plate, which is attached to the semi-elliptical nozzle bottom surface and instrumented with twenty Gardon-gage heat flux calorimeters and twelve pressure gages, is used to characterize the convective heating environment over the panel test articles. The present analysis comprises computational fluid dynamics simulations of the nonequilibrium flowfield in the facility nozzle and test box, and the flowfields over panel test articles, and comparisons with the measured test data. Both laminar and turbulent simulations are performed. Constant current studies are conducted: the measured data are grouped at the same arc current levels with varying mass flow rates, and they are compared with corresponding computations. For all currents considered, these studies indicate that the semi-elliptical nozzle flow is transitional at relatively higher mass flow rates within the facility operating envelope. An approximate facility map for the transitional flow characterization is developed, showing laminar and transitional to turbulent flow regions.

Arc-jets↗
NASA NTRSDate not supplied

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in the NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel spray nozzle configuration and calibration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗
NASA NTRSDate not supplied

Additional Comparison of Ice Shapes on Full-Chord and Truncated Swept Wing Models from January 2022

A research program was conducted to evaluate the effectiveness of icing tunnel hybrid model design. A hybrid design is where the full-scale leading edge of a wing section is maintained only to a certain percentage of the local chord, while the aft section of the model is redesigned into a shortened or truncated planform. An initial study was conducted in 2020 where the ice shape geometries on a full-chord length version of the swept CRM65 wing model were compared to those from the hybrid version of CRM65 that were obtained in NASA Icing Research Tunnel in 2015. The results were reported in a 2021 paper. For most test conditions, the overall size and shape of the ice shapes compared well. However, the ice shapes from the full-chord model were generally slightly smaller than those from the hybrid model. A follow-on test was conducted in 2022 and obtained ice shapes on both full-chord and hybrid wing models during the same test campaign to eliminate the differences in the tunnel configuration as a cause for the differences observed during the previous investigation. The ice shapes obtained on the full-chord model compared much better to those obtained on the hybrid model during the 2022 test, with nearly identical cross sections and ice mass values generally within 5%.

Icing↗
NASA NTRSDate not supplied

An Extension of the Truncated Ingard-Myers Impedance Boundary Condition for High Mach Number Grazing Flows

The Ingard-Myers impedance boundary condition is widely recognized to be prone to hydrodynamic Kelvin-Helmholtz-type instability, primarily due to its use of a vortex sheet to model the flow at the boundary. Recently, a stabilized approximation of the Ingard-Myers condition, called the Truncated Ingard-Myers Impedance Boundary Condition (TIMIBC), has been introduced. This approximation offers a good representation of the Ingard-Myers condition for grazing flows characterized by low to mid subsonic Mach numbers. This paper explores an extension of the TIMIBC, referred to as TIMIBC-ext, designed for liners in grazing flows with high subsonic Mach numbers. The TIMIBC-ext introduces a tunable parameter and demonstrates that by judiciously selecting the parameter value, the accuracy of the TIMIBC can be improved for either upstream or downstream propagating waves in grazing flows with high subsonic Mach numbers. Consequently, the TIMIBC-ext represents an enhancement to the TIMIBC when the location of the source relative to the liner (upstream or downstream) is known. Time domain implementations of the TIMIBC-ext are also provided, employing a multipole expansion model for the impedance function. A numerical example is provided to assess the performance of the TIMIBC-ext, comparing computational results with measurements from a recent set of measurements in the NASA Langley Grazing Flow Impedance Tube.

time domain acoustic scattering↗
DOE OSTI2024

Truncated nonlinear interferometer-based sensor system

A truncated non-linear interferometer-based sensor system includes an input port that receives an optical beam and a non-linear amplifier that amplifies the optical beam with a pump beam and renders a probe beam and a conjugate beam. The system's local oscillators have a relationship with the respective beams. The system includes a sensor that transduces an input with the probe beam and the conjugate beam or their respective local oscillators. It includes one or more phase-sensitive detectors that detect a phase modulation between the respective local oscillators and the probe beam and the conjugate beam. Output from the phase-sensitive-detectors is based on the detected phase modulation. The phase-sensor-detectors include measurement circuitry that measure the phase signals. The measurement is the sum or difference of the phase signals in which the measured combination exhibit a quantum noise reduction in an intensity difference or a phase sum or an amplitude difference quadrature.

Pooser, Raphael C.↗
NASA NTRS1972

Vibration and aerodynamic buckling experiments for blunt truncated conical shells with ring-supported edges

The vibration and buckling characteristics of a series of 140 deg ring-supported conical shells have been investigated experimentally and analytically. Experimental results were obtained from 14 conical shells, each attached to a solid nose cap at the small end. The large (base) end was either free or attached to a solid ring of rectangular cross section. The size of the solid base rings of rectangular cross section was systematically varied to provide a wide range of edge restraint. Shell buckling was induced by aerodynamic loading at a Mach number of 3; the vibration data were obtained prior to the wind tunnel tests. The experimental vibration data indicated that the size of the base rings had a pronounced effect on the magnitude of the frequencies and on the frequency spectrum. For vibration modes having less than two circumferential waves, the frequencies descreased with increasing ring size; whereas, for modes with several circumferential waves, the frequencies initially increased rapidly with ring size and then became relatively insensitive to further increases in ring size. This latter behavior was similar to the trend exhibited by the variation of buckling pressure with ring size. The experimental results were in excellent qualitative agreement with theoretical results and indicated that current shell-of-revolution analyses are adequate for predicting the vibration and buckling behavior of ring-supported shells, at least for the simple isotropic shells considered in this investigation.

Miserentino, R.↗
NASA NTRS1972

Magnitude error bounds for sampled-data frequency response obtained from the truncation of an infinite series, and compensator improvement program

The frequency response method of analyzing control system performance is discussed, and the difficulty of obtaining the sampled frequency response of the continuous system is considered. An upper bound magnitude error equation is obtained which yields reasonable estimates of the actual error. Finalization of the compensator improvement program is also reported, and the program was used to design compensators for Saturn 5/S1-C dry workshop and Saturn 5/S1-C Skylab.

Mitchell, J. R.↗
NASA NTRS1972

The effects of estimation of censoring, truncation, transformation and partial data vectors

The purpose of this research was to attack statistical problems concerning the estimation of distributions for purposes of predicting and measuring assembly performance as it appears in biological and physical situations. Various statistical procedures were proposed to attack problems of this sort, that is, to produce the statistical distributions of the outcomes of biological and physical situations which, employ characteristics measured on constituent parts. The techniques are described.

Hartley, H. O.↗