Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMOPHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Thermophysical analysis of II-VI semiconductors by PPE calorimetry and lock-in thermography

An accurate determination of thermophysical properties such as thermal diffusivity, thermal effusivity and thermal conductivity is extremely important for characterization and quality assurance of semiconductors. Thermal diffusivity and effusivity of some binary semiconductors have been investigated. Two experimental techniques were used: a contact technique (PPE calorimetry) and a non contact technique (lock-in thermography). When working with PPE, in the back (BPPE) configuration and in the thermally thick regim of the pyroelectric sensor, we can get the thermal diffusivity of the sample by performing a scanning of the excitation frequency of radiation. Thermal effusivity is obtained in front configuration (sensor directly irradiated and sample in back position) by performing a thickness scan of a coupling fluid. By using the lock-in thermography technique, the thermal diffusivity of the sample is obtained from the phase image. The results obtained by the two techniques are in good agreement. Nevertheless, for the determination of thermal diffusivity, lock-in thermography is preferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The calculation of thermophysical properties of nickel plasma

The thermophysical properties of Nickel plasma have been calculated for the temperatures 10–60 kK and densities less than 1 g/cm{sup 3}. These properties are the pressure, internal energy, heat capacity, and the electronic transport coefficients (electrical conductivity, thermal conductivity, and thermal power). The thermodynamic values have been calculated by means of the chemical model, which also allows one to obtain the ionic composition of considered plasma. The composition has been used to calculate the electronic transport coefficients within the relaxation time approximation. The results of the present investigation have been compared with the calculations of other researchers and available data of measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

State-of-the-art ab initio potential energy curve for the krypton atom pair and thermophysical properties of dilute krypton gas

A new reference krypton-krypton interatomic potential energy curve was developed by means of quantum-chemical ab initio calculations for 36 interatomic separations. Highly accurate values for the interaction energies at the complete basis set limit were obtained using the coupled-cluster method with single, double, and perturbative triple excitations as well as t-aug-cc-pV5Z and t-aug-cc-pV6Z basis sets including mid-bond functions, with the 6Z basis set being newly constructed for this study. Higher orders of coupled-cluster terms were considered in a successive scheme up to full quadruple excitations. Core-core and core-valence correlation effects were included. Furthermore, relativistic effects were studied not only at a scalar relativistic level using second-order direct perturbation theory, but also utilizing full four-component and Gaunt-effect computations. An analytical pair potential function was fitted to the interaction energies, which is characterized by a depth of 200.88 K with an estimated standard uncertainty of 0.51 K. Thermophysical properties of low-density krypton were calculated for temperatures up to 5000 K. Second and third virial coefficients were obtained from statistical thermodynamics. Viscosity and thermal conductivity as well as the self-diffusion coefficient were computed using the kinetic theory of gases. The theoretical results are compared with experimental data and with results for other pair potential functions from the literature, especially with those calculated from the recently developed ab initio potential of Waldrop et al. [J. Chem. Phys. 142, 204307 (2015)]. Highly accurate experimental viscosity data indicate that both the present ab initio pair potential and the one of Waldrop et al. can be regarded as reference potentials, even though the quantum-chemical methods and basis sets differ. However, the uncertainties of the present potential and of the derived properties are estimated to be considerably lower.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermophysical properties of liquid Ni around the melting temperature from molecular dynamics simulation

Thermophysical properties of liquid nickel (Ni) around the melting temperature are investigated by means of classical molecular dynamics (MD) simulation, using three different embedded atom method potentials to model the interactions between the Ni atoms. Melting temperature, enthalpy, static structure factor, self-diffusion coefficient, shear viscosity, and thermal diffusivity are compared to recent experimental results. Using ab initio MD simulation, we also determine the static structure factor and the mean-squared displacement at the experimental melting point. For most of the properties, excellent agreement is found between experiment and simulation, provided the comparison relative to the corresponding melting temperature. We discuss the validity of the Hansen-Verlet criterion for the static structure factor as well as the Stokes-Einstein relation between self-diffusion coefficient and shear viscosity. The thermal diffusivity is extracted from the autocorrelation function of a wavenumber-dependent temperature fluctuation variable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expansion dynamics of femtosecond laser-induced plasmas: Influence of thermophysical plasma properties

This study investigates the expansion dynamics of femtosecond laser-induced plasmas, emphasizing the impact of plasma thermophysical properties and ambient gas composition. Through shadowgraphy experiments and multiphase computational fluid dynamics (CFD) simulations, the influence of parameters such as heat capacity, molecular weight, and thermal conductivity on plume morphology, shockwave evolution, and energy dissipation mechanisms is examined. A mixture multiphase model is implemented to capture the interaction between the plasma and the surrounding gas. Simulation results reveal that plasma expansion is strongly inertia-driven. Results show that differences in plasma properties and ambient conditions affect the shape and temperature distribution of the expanding plume. The early-stage dynamics are primarily dictated by pressure forces, whereas thermal and viscous effects play a growing role in the plume's behavior during later stages of expansion. The CFD findings show the necessity of accurate initial condition characterization, including crater geometry and plasma pressure and temperature, for reliable modeling of plasma evolution in laser ablation processes.

CFD modeling↗

Thermophysical parameters of the LBO crystal

The thermophysical parameters (linear thermal expansion coefficients, thermal conductivities, and heat capacity) of the lithium triborate (LBO) crystal are measured and compared with previously published data. (nonlinear-optics phenomena)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermophysical and gas-dynamic characteristics of laser-induced gasplasma flows under femtosecond laser ablation of titanium in vacuum

We report the results of experimental investigation of thermophysical and gas-dynamic characteristics of the gas-plasma flows induced by ultrashort (45 – 60 fs) laser pulse irradiation (the radiation wavelength λ = 400, 800 nm) of a titanium target in vacuum (∼5 × 10{sup -4} mbar). The use of combined interferometric technique and complex experimental data processing allowed us to estimate the momentum coupling coefficient (C{sub m} ∼ 10{sup -4} N W{sup -1}), the efficiency of laser energy conversion to the kinetic energy of the gas-plasma flow (65% – 85%), the spatiotemporal distributions of the particle density (n{sub e} = 10{sup 18} – 10{sup 20} cm{sup -3}) and velocity ((v)=4 – 9 km s{sup -1}), the static (10{sup 6} – 10{sup 8} Pa) and total (10{sup 7} – 10{sup 11} Pa) pressure and temperature (T=7 – 50 kK) in the flow. Our data are compared with published data obtained by other methods. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling of the laser amplification process with allowance for the effect of the temperature distribution in an Yb : YAG gain element on the thermophysical and lasing characteristics of the medium

A time-dependent three-dimensional model for the laser amplification process has been constructed with allowance for the effect of the temperature distribution on the thermophysical and lasing characteristics of gain media. We have performed numerical modelling of the laser amplification process in the gain elements of a two-stage subjoule-level cryogenic laser amplifier operating at a pulse repetition rate of up to 1 kHz. It has been shown that taking into account the temperature distribution is of critical importance in calculation of cryogenically cooled laser amplifiers pumped with high-power diodes. We have found optimal diode pump parameters at which the maximum achievable pulse energy at the amplifier output can reach 300 and 570 mJ at pulse repetition rates of 1000 and 500 Hz, respectively. (extreme light fields and their interaction with matter)

42 ENGINEERING↗

Parameterizing empirical interatomic potentials for predicting thermophysical properties via an irreducible derivative approach: the case of ThO 2 and UO 2

The accuracy of classical physical property predictions using molecular dynamics simulations is determined by the quality of the interatomic potentials. Here we introduce a training approach for empirical interatomic potentials (EIPs) which is well suited for capturing phonons and phonon-related properties. Our approach is based on direct comparisons of the second- and third-order irreducible derivatives (IDs) between an EIP and the Born–Oppenheimer potential within density functional theory (DFT) calculations. IDs fully exploit space group symmetry and allow for training without redundant information. We demonstrate the fidelity of our approach in the context of ThO 2 and UO 2 , where we optimize parameters of an embedded-atom method potential in addition to core–shell interactions. Our EIPs provide thermophysical properties in good agreement with DFT and outperform widely utilized EIPs for phonon dispersion and thermal conductivity predictions. Reasonable estimates of thermal expansion and formation energies of Frenkel pairs are also obtained.

empirical interatomic potential↗

Exchange-correlation thermal effects in shocked deuterium: Softening the principal Hugoniot and thermophysical properties

We investigate Exchange–correlation (XC) thermal effect for transport and optical properties of deuterium along the principal Hugoniot. The study is performed using ab initio molecular dynamics simulations within the Mermin–Kohn–Sham density functional theory. XC thermal effects are taken into account via the temperature-dependent Karasiev–Dufty–Trickey (KDT16) generalized gradient approximation functional [Phys. Rev. Lett. 120, 076401 (2018)]. We reveal that XC thermal effects account for the softening of the Hugoniot at pressures P > 250 GPa and improve agreement with recent experimental measurements. Moreover, XC thermal effects lead to the reflectivity increase by about 2% for shock speeds above 20 km/s. Calculated reflectivity for shock speeds up to 50 km/s is in excellent agreement with recent experimental measurements on the OMEGA Laser System. The dc conductivity is increased by about 4% due to XC thermal effects. The system evolution along the Hugoniot crosses the so-called warm-dense-matter regime, and XC thermal effects must be taken into account to accurately predict the thermophysical properties across warm dense conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermophysical modeling of raw glaze liquidus temperature and viscosity

Raw glazes, which do not contain pre-melted glass frits, are widely used due to their low cost. The natural variability of the mineral compositions used in raw glazes affects their viscosity during firing. Molten glaze viscosity plays an important role in determining the final surface quality; therefore, it is important to determine how raw glaze composition and firing conditions affect viscosity. Thermophysical modeling provides a way to evaluate the liquidus temperature and viscosity of molten glazes as a function of composition and oxygen activity. Equilibrium phase volume fraction and composition of 242 raw glaze recipes were evaluated under oxidizing and reducing conditions. Undissolved or precipitation of solid phases explain the secondary flux transition from anti-fluxing to fluxing near the liquidus temperature. The liquidus temperature and viscosity of iron glazes decrease as a function of increasing iron content under a reducing atmosphere. The empirical probability distribution of molten glaze viscosity follows a lognormal distribution, with lead glazes having significantly lower viscosity compared with glazes without lead. Here, the peak firing temperature viscosity of lead-free glazes is near the working point of glass. Multiple linear regression analysis shows that the peak firing temperature viscosity and liquidus temperature significantly predict the viscosity factor.

36 MATERIALS SCIENCE↗

Thermophysical properties of laser-sintered Zr-ZrB2 cermets

Thermophysical properties between 293 and 1863 K were investigated for laser-sintered Zr-ZrB{sub 2} cermets containing 30, 50, and 70 wt% Zr. The measured values of coefficient of thermal expansion of Zr-ZrB{sub 2} cermets were larger than the predicted values due to the effect of Zr-O solid solution, which was formed during laser sintering. The order-disorder phase transition of Zr-O solid solution resulted in the sharp increase in heat capacity between 625 and 675 K. Thermal conductivities were calculated from measured densities, heat capacities, and thermal diffusivities. Thermal diffusivities at 473 K were 14.0, 12.2, and 8.0 mm{sup 2}/s for 30Zr-ZrB{sub 2}, 50Zr-ZrB{sub 2}, and 70Zr-ZrB{sub 2}, respectively. Thermal conductivities at 473 K were 38, 31, and 20 W {center_dot} (m {center_dot} K){sup -1} for 30Zr-ZrB{sub 2}, 50Zr-ZrB{sub 2}, and 70Zr-ZrB{sub 2}, respectively. Electron contribution to thermal conductivity of the 70Zr-ZrB{sub 2} cermet was determined using electrical resistivity measurements, which shows that total thermal conductivity mostly came from the electron contribution at high temperatures (1073-1473 K) while the phonon contribution was very small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Temperature Thermophysical Property Measurement of Proposed Gen3 CSP Containment Materials

Abstract The US Department of Energy (DOE) has sponsored an initiative to improve the thermal efficiency of Concentrating Solar Power (CSP) systems. To approach parity with conventional fossil fuel-based electricity generation, the operating temperature of the CSP power cycle must exceed 700°C with integrated thermal energy storage. The materials used to house this high-temperature heat transfer media must be thermally stable and corrosion resistant. However, the temperature-dependent thermophysical properties of commonly used containment materials (nickel alloys and alumina-based firebricks) are either not well known or poorly understood. In this report, the high-temperature thermal properties of thirteen (13) candidate containment materials proposed by the CSP community are tested using laser flash analysis and differential scanning calorimetry.

Brankovic, Sonja A.↗

Thermophysical Properties of U-10MO Alloy

This report provides an overview of thermophysical properties of unirradiated uranium alloyed with ten weight percent molybdenum (U 10Mo), with particular focus on those material properties needed for modeling of new fuels for HPRRs (High Performance Research Reactors). The report contains both historical data available in the literature on U-10Mo, as well as more recent results conducted by the Global Threat Reduction Initiative fuel development program. The main use of the report is intended as a standard U-10Mo alloy properties reference for reactor models and simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Engineering Database of Liquid Salt Thermophysical

The purpose of this report is to provide a review of thermophysical properties and thermochemical characteristics of candidate molten salt coolants, which may be used as a primary coolant within a nuclear reactor or heat transport medium from the Very High Temperature Reactor (VHTR) to a processing plant; for example, a hydrogen-production plant. Thermodynamic properties of four types of molten salts, including LiF-BeF 2 (67 and 33 mol%, respectively; also known as FLiBe), LiF-NaF-KF (46.5, 11.5, and 52 mol%, also known as FLiNaK), and KCl-MgCl 2 (67 and 33 mol%), and sodium nitrate-sodium nitrite-potassium nitrate (NaNO 3 –NaNO 2 –KNO 3 , 7-49-44 mol%, also known as Hitec® salt) have been investigated. Limitations of existing correlations to predict density, viscosity, specific heat capacity, surface tension, and thermal conductivity were identified. The impact of thermodynamic properties on the heat transfer, especially the Nusselt number, was also discussed. Stability of the molten salts with structural alloys and their compatibility with the structural alloys was studied. Nickel and high temperature alloys with dense Ni coatings are effectively inert to corrosion in fluorides, but not so in chlorides. Of the chromium containing alloys, Hastelloy N appears to have the best corrosion resistance in fluorides, while Haynes 230 was the most resistant in chloride. In general, alloys with increasing carbon and chromium content are increasingly subject to corrosion by the fluoride salts FLiBe and FLiNaK due to attack and dissolution of the intergranular chromium carbide. Future research to obtain needed information was identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Production Process, Thermophysical Properties, and Quality Assurance Process for the Provision of Enhanced Accident Tolerant Fuels: ORNL Rodlets for the ATR ATF-1 Experiment

The work documented in this report was performed under the Fuel Cycle Research and Development (FCRD) Program’s Advanced Fuels Campaign (AFC) FY13 Work Package Number FT-13OR020222, revision 0, “Route to production and qualification of FCM fuel - ORNL.” The sole milestone in this work package is M2FT-13OR0202221, “Report Documenting Production Process, Thermophysical Properties, and QA Process to be Applied to First Irradiation Batch of FCM Fuels,” due July 27, 2013. This report satisfies that milestone.

Bell, Gary L.↗

Thermophysical properties of BKC 44306 and BKC 44307 PMDI urethane solid and foams

Accurate knowledge of thermophysical properties of urethane foam is considered extremely important for meaningful models and analyses to be developed of scenarios wherein the foam is heated. Its performance at temperature requires a solid understanding of the foam material properties at temperature. Also, foam properties vary with density/porosity. An experimental program to determine the thermal properties of the two foams and their parent solid urethane was developed in order to support development of a predictive model relating density and thermal properties from first principles. Thermal properties (thermal conductivity, diffusivity, and specific heat) of the foam were found to vary with temperatures from 26°C to 90°C. Thermal conductivity generally increases with increasing temperature for a given initial density and ranges from .0433 W/mK at 26°C to .0811 W/mK at 90°C; thermal diffusivity generally decreases with increasing temperature for a given initial density and ranges from .4101 mm 2 /s at 26°C to .1263 mm 2 /s at 90°C; and specific heat generally increases with increasing temperature for a given initial density and ranges from .1078 MJ/m 3 K at 26°C to .6323 MJ/m 3 K at 90°C. Thermal properties of the solid urethane were also found to vary with temperatures from 26°C to 90°C. Average thermal conductivity generally increases with increasing temperature for a given initial density and ranges from 0.126 to 0.131 W/mK at 26°C to 0.153 to 0.157 W/mK at 90°C; average thermal diffusivity generally decreases with increasing temperature for a given initial density and ranges from 0.142 to 0.147 mm 2 /s at 26°C to 0.124 to 0.125 mm 2 /s at 90°C; and average specific heat generally increases with increasing temperature for a given initial density and ranges from 0.889 to 0.899 MJ/m 3 K to 1.229 to 1.274 MJ/m 3 K at 90°C. The density of both foam and solid urethane decreased with increasing temperature.

36 MATERIALS SCIENCE↗

Thermophysical Properties of Launch Complex 17 of the Cape Canaveral Concrete

Accurate knowledge of thermophysical properties of concrete is considered extremely important for meaningful models to be developed of scenarios wherein the concrete is rapidly heated. Test of solid propellant burns on samples of concrete from Launch Complex 17 of the Cape Canaveral show spallation and fragmentation. In response to the need for accurate modeling scenarios of these observations, an experimental program to determine the permeability and thermal properties of the concrete was developed. Room temperature gas permeability measurements of Launch Complex 17 of the Cape Canaveral concrete dried at 50°C yield permeability estimates of 0.07mD (mean), and thermal properties (thermal conductivity, diffusivity, and specific heat) were found to vary with temperatures from room temperature to 300°C. Thermal conductivity ranges from 1.7-1.9 W/mK at 50°C to 1.0-1.15 W/mK at 300°C, thermal diffusivity ranges from 0.75-0.96 mm 2 /s at 50°C to 0.44-0.58 mm 2 /s at 300°C, and specific heat ranges from 1.76-2.32 /m 3 K to 2.00-2.50 /m 3 K at 300°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗