Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR IGNITION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Ion beam requirements for fast ignition of inertial fusion targets

Ion beam requirements for fast ignition are investigated by numerical simulation taking into account new effects, such as ion beam divergence, not included before. We assume that ions are generated by the TNSA scheme in a curved foil placed inside a re-entrant cone and focused on the cone apex or beyond. From the focusing point to the compressed core, ions propagate with a given divergence angle. Ignition energies are obtained for two compressed fuel configurations heated by proton and carbon ion beams. The dependence of the ignition energies on the beam divergence angle and on the position of the ion beam focusing point has been analyzed. Comparison between TNSA and quasi-monoenergetic ions is also shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reducing wall plasma expansion with gold foam irradiated by laser

The experimental study on the expanding plasma movement of low-density gold foam (∼1% solid density) irradiated by a high power laser is reported in this paper. Experiments were conducted using the SG-III prototype laser. Compared to solid gold with 19.3 g/cc density, the velocities of X-ray emission fronts moving off the wall are much smaller for gold foam with 0.3 g/cc density. Theoretical analysis and MULTI 1D simulation results also show less plasma blow-off, and that the density contour movement velocities of gold foam are smaller than those of solid gold, agreeing with experimental results. These results indicate that foam walls have advantages in symmetry control and lowering plasma fill when used in ignition hohlraum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICF APPLICATIONS OF FAST IONS GENERATED BY FOCUSING SHORT LASER PULSES ON ULTRA-THIN CAUSALLY ISOLATED TARGETS

MeV low-Z ions are expected to find application in starting ignition in high gain ICF targets. Quite stringent conditions in terms of power density and total energy are required to start fast ignition in a pre-compressed fuel by light-ion beams, this setting corresponding constraints on the design of adequate sources. In this paper are reported studies performed at ENEA (theory and experiments) on an ion source possibly suitable for fast ignition or entropy injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-monoenergetic ion generation by hole-boring radiation pressure acceleration in inhomogeneous plasmas using tailored laser pulses

It is proposed that laser hole-boring at a steady speed in inhomogeneous overdense plasma can be realized by the use of temporally tailored intense laser pulses, producing high-fluence quasi-monoenergetic ion beams. A general temporal profile of such laser pulses is formulated for arbitrary plasma density distribution. As an example, for a precompressed deuterium-tritium fusion target with an exponentially increasing density profile, its matched laser profile for steady hole-boring is given theoretically and verified numerically by particle-in-cell simulations. Furthermore, we propose to achieve fast ignition by the in-situ hole-boring accelerated ions using a tailored laser pulse. Simulations show that the effective energy fluence, conversion efficiency, energy spread, and collimation of the resulting ion beam can be significantly improved as compared to those found with un-tailored laser profiles. For the fusion fuel with an areal density of 1.5 g cm{sup –2}, simulation indicates that it is promising to realize fast ion ignition by using a tailored driver pulse with energy about 65 kJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional filamentary structures of a relativistic electron beam in fast ignition plasmas

The filamentary structures and associated electromagnetic fields of a relativistic electron beam have been studied by three-dimensional particle-in-cell simulations in the context of fast ignition fusion. The simulations explicitly include collisions in return plasma current and distinctly examine the effects of beam temperature and collisions on the growth of filamentary structures generated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of Rayleigh–Taylor growth in directly driven cryogenic-deuterium targets

Direct-drive, Rayleigh–Taylor growth experiments in liquid deuterium (D2) were performed on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] using planar cryogenic targets at a laser intensity of ∼4 × 1014 W/cm2. These are the first Rayleigh–Taylor measurements in deuterium at conditions relevant to inertial confinement fusion using a mass preimposed initial modulation. The measured modulation optical depths are in agreement with the 2D hydrodynamics code DRACO using flux-limited local thermal transport, providing an important step in the experimental validation of simulations for direct-drive ignition.

Hager, J. D.↗

Simulations of electron transport and ignition for direct-drive fast-ignition targets

The performance of high-gain, fast-ignition fusion targets is investigated using one-dimensional hydrodynamic simulations of implosion and two-dimensional (2D) hybrid fluid-particle simulations of hot-electron transport, ignition, and burn. The 2D/3D hybrid-particle-in-cell code LSP[D. R. Welch et al., Nucl. Instrum. Methods Phys. Res. A 464, 134 (2001)] and the 2D fluid code DRACO[P. B. Radha et al., Phys. Plasmas 12, 056307 (2005)] are integrated to simulate the hot-electron transport and heating for direct-drive fast-ignition targets. LSP simulates the transport of hot electrons from the place where they are generated to the dense fuel core where their energy is absorbed. DRACO includes the physics required to simulate compression, ignition, and burn of fast-ignition targets. The self-generated resistive magnetic field is found to collimate the hot-electron beam, increase the coupling efficiency of hot electrons with the target, and reduce the minimum energy required for ignition. Resistive filamentation of the hot-electron beam is also observed. The minimum energy required for ignition is found for hot electrons with realistic angular spread and Maxwellian energy-distribution function.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient energy absorption of intense ps-laser pulse into nanowire target

The interaction between ultra-intense laser light and vertically aligned carbon nanotubes is investigated to demonstrate efficient laser-energy absorption in the ps laser-pulse regime. Results indicate a clear enhancement of the energy conversion from laser to energetic electrons and a simultaneously small plasma expansion on the surface of the target. A two-dimensional plasma particle calculation exhibits a high absorption through laser propagation deep into the nanotube array, even for a dense array whose structure is much smaller than the laser wavelength. The propagation leads to the radial expansion of plasma perpendicular to the nanotubes rather than to the front side. These features may contribute to fast ignition in inertial confinement fusion and laser particle acceleration, both of which require high current and small surface plasma simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PLANS FOR IGNITION EXPERIMENTS ON THE NATIONAL IGNITION FACILITY

The National Ignition Facility (NIF) is a 192-beam Nd-glass laser facility presently under construction at Lawrence Livermore National Laboratory (LLNL) in support of inertial confinement fusion (ICF) and high-energy-density (HED) science. NIF will produce 1.8 MJ, 500 TW of ultraviolet light, making it the world's largest and most powerful laser system. NIF will be the world's preeminent facility for the study of matter at extreme temperatures and densities and for producing and developing ICF. The ignition studies will be the next important step in developing inertial fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vacuum arc behavior and its voltage characteristics in drawing process controlled by composite magnetic fields along axial and transverse directions

In this research, drawing vacuum arc (VA) experiments were conducted using composite contacts under currents ranging from 5 kA to 20 kA root mean square (rms). The new type of contact comprised an axial magnetic field (AMF) configuration and a transverse magnetic field (TMF) configuration. The TMF plate was in the center, surrounded by the AMF plate. The contact generated both AMFs and TMFs simultaneously. VA appearances and arc voltages were recorded, and the VA was modeled as a conductor for electromagnetic force analysis in ANSYS software. The results showed that the coaxiality of operating mechanisms significantly influenced arc behavior just as the arc was ignited. When arc brightness did not increase after ignition, there was a voltage drop accompanied with diffusion of the VA. As to VA development, when an arc was ignited on an AMF plate, it spread on the plate and rotated. Over time the arc current increased, the constricting arc forms, and the arc column rotated on the TMF plate under the action of Ampere's force. With regard to the influence of a magnetic field on a VA at different stages, in the initial drawing arc stage the TMF was dominant, and the arc started to rotate under the action of Ampere's force. Afterwards, the AMF was dominant, with a steadily burning arc. As for contact melting, in the initial arcing period, a contracted short arc caused severe melting and erosion of the contact plate. When the ignition spot or root was close to the slot of plate, the electromagnetic force pushed the arc toward slot and contact edge, resulting in local erosion of the slot region.

42 ENGINEERING↗

Symmetry tuning for ignition capsules via the symcap technique

Symmetry of an implosion is crucial to get ignition successfully. Several methods of control and measurement of symmetry have been applied on many laser systems with mm size hohlraums and ns pulses. On the National Ignition Facility [Moses et al., Phys. Plasmas 16, 041006 (2009)] we have large hohlraums of cm scale, long drive pulses of 10 s of ns, and a large number of beams with the option to tune their wavelengths. Here we discuss how we used the x-ray self-emission from imploding surrogates to ignition capsules (symcaps) to measure the symmetry of the implosion. We show that symcaps are good surrogates for low order symmetry, though having lower sensitivity to distortions than ignition capsules. We demonstrate the ability to transfer energy between laser beams in a gas-filled hohlraum using wavelength tuning, successfully tuning the lowest order symmetry of the symcaps in different size hohlraums at different laser energies within the specification established by calculations for successful ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The NEW DESY RF-Driven Multicusp H{sup -} Ion Source

The HERA RF-Volume source is the only source that can deliver a H{sup -} current of 40 mA without Cs routinely and for periods of several years. Step by step improvements have led to a completely new design. The plasma is now contained in an Al{sub 2}O{sub 3} ceramic chamber and has no contact to metal surfaces except for the collar. The sensitive antenna and also the pair of filter magnets are outside of the plasma. The plasma chamber is mounted in a ceramic disk for high voltage insulation. The ignition of the plasma is done with an ignition source utilizing the higher pressure at the gas input. Details about the setup, performance, H{sup +} containment, sparking suppression and experience with a new 10 cm diameter LEBT will be given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic field generation during intense laser channelling in underdense plasma

Channel formation during the propagation of a high-energy (120 J) and long duration (30 ps) laser pulse through an underdense deuterium plasma has been spatially and temporally resolved via means of a proton imaging technique, with intrinsic resolutions of a few μm and a few ps, respectively. Conclusive proof is provided that strong azimuthally symmetric magnetic fields with a strength of around 0.5 MG are created inside the channel, consistent with the generation of a collimated beam of relativistic electrons. The inferred electron beam characteristics may have implications for the cone-free fast-ignition scheme of inertial confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Nova Upgrade Facility

The Nova Upgrade Facility is being designed to achieve inertial confinement fusion (ICF) ignition and gain. A baseline design of the laser and experimental facilities has been completed, and a development plan, which includes a fully integrated laser demonstration, has been formulated. With adequate funding, the activities in this plan could be completed by late 1993. Construction of the Nova Upgrade beginning at that time would make possible the achievement of ICF ignition before the end of the decade.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Combustion Dynamics of a Propane–Air Gas Mixture when It Is Ignited by a Streamer Microwave Discharge

The results of experimental studies of combustion of propane–air gaseous mixture when it was ignited by a microwave discharge have been described. The mixture with different propane content fills a sealed radio-transparent tube placed along the axis of a focused linearly polarized quasi-optical microwave beam at atmospheric pressure. Multi-point ignition of the mixture is carried out near one end of the tube by a pulsed microwave discharge with a surface-developed streamer structure. The growth of gas pressure in the tube as propane burned was recorded in the experiments. The microwave pulse energy being invested in high-temperature discharge plasma has been estimated in them. The minimum percentage of propane in the mixture at which the microwave discharge ignites it has been determined in experiments. The time dependence of the pressure increase in the tube as the propane burns determines the combustion process dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-temperature, high-density plasmas in long micro-tubes

A low-temperature He microplasma plume generated in a micro quartz tube with the inner diameter decreasing from 245 μm to 6 μm is reported. The microplasma plume has a length of around 1.5 cm and reaches the position where the tube diameter is 10 μm. Though the inner diameter of the tube is in sub-millimeter, the cross section of the tube is not fully filled with the plasma only until the tube inner diameter is down to 30 μm. The electron density estimated from H{sub α} stark broadening increases as the inner diameter of the tube decreases. The ignition voltage increases from 11 kV to 40 kV as the diameter of the inner quartz tube decreases from 245 μm to 10 μm. Further analysis shows that, in order to ignite a non-equilibrium plasma plume in 1 μm diameter tube, the applied voltage of about 65 kV is needed and the plasma density could be as high as ∼10{sup 18 }cm{sup −3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a streaked radiography instrument for ICF ablator tuning measurements

A streaked radiography diagnostic has been proposed as a technique to determine the ablator mass remaining in an inertial confinement fusion ignition capsule at peak velocity. This instrument, the 'HXRI-5', has been designed to fit within a National Ignition Facility Diagnostic Instrument Manipulator. The HXRI-5 will be built at Sandia National Laboratories (SNL), and initial testing will be done at the SNL Z-Beamlet Facility. In this paper, we will describe the National Ignition Campaign requirements for this diagnostic, the instrument design, and the planned test experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗