Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supersonic compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

1- by 1-Foot Supersonic Wind Tunnel Sidewall Flowfield Compression Plate Study

A method for locally increasing the dynamic pressure in the test section of a supersonic wind tunnel is investigated from a theoretical, computational and experimental perspective, culminating in a reduced-scale, proof-of-concept test at Mach 3.44. Symmetric, variable-angle compression plates along the test section sidewalls generate oblique shockwaves to elevate the test section dynamic pressure (q). The experimental effort utilizes boundary-layer pitot rakes to sample the incoming flow near the floor, pitot and static rakes to measure the high-q core flow and numerous surface taps to map out the static pressure distribution along the floor, ceiling and sidewalls. A reliable and robust starting procedure is developed to establish supersonic flow in the test section and behind the compression plates. A characterization of the incoming floor boundary layer reveals previously documented features (such as a bulge toward the centerline) and an unexpected (and as-yet-unexplained) thickening of the boundary layer with increasing Reynolds number around total pressures of 40–60 psia. The high-q core flow is characterized for eight compression plate angles (4.0–8.0°), eight tunnel total pressures (20–139 psia) and three axial stations (24.95–27.35 inches). The peak dynamic pressure rise exceeds expectations. At conditions relevant to full-scale testing (6.0° and 139 psia), the dynamic pressure increases by a factor of 1.73, the Mach number becomes 2.85 and the total pressure drops imperceptibly. Basic distortion metrics show transverse non-uniformity of less than 5 %. Limited spatial resolution in the static rake measurements warrants additional, higher fidelity testing or computational analysis. Surface-mounted, fast-response instrumentation suggests minimal unsteadiness in the flow, less than a few percent of the mean (comparable to the sensor accuracy).

Wind tunnel testing, test techniques/methods, dyna↗

Apparatus and process for the separation of gases using supersonic expansion and oblique wave compression

The disclosure provides an apparatus and method for gas separation through the supersonic expansion and subsequent deceleration of a gaseous stream. The gaseous constituent changes phase from the gaseous state by desublimation or condensation during the acceleration producing a collectible constituent, and an oblique shock diffuser decelerates the gaseous stream to a subsonic velocity while maintain the collectible constituent in the non-gaseous state. Following deceleration, the carrier gas and the collectible constituent at the subsonic velocity are separated by a separation means, such as a centrifugal, electrostatic, or impingement separator. In an embodiment, the gaseous stream issues from a combustion process and is comprised of N.sub.2 and CO.sub.2.

42 ENGINEERING↗

THE FRACTAL DENSITY STRUCTURE IN SUPERSONIC ISOTHERMAL TURBULENCE: SOLENOIDAL VERSUS COMPRESSIVE ENERGY INJECTION

In a systematic study, we compare the density statistics in high-resolution numerical experiments of supersonic isothermal turbulence, driven by the usually adopted solenoidal (divergence-free) forcing and by compressive (curl-free) forcing. We find that for the same rms Mach number, compressive forcing produces much stronger density enhancements and larger voids compared to solenoidal forcing. Consequently, the Fourier spectra of density fluctuations are significantly steeper. This result is confirmed using the {delta}-variance analysis, which yields power-law exponents {beta} {approx} 3.4 for compressive forcing and {beta} {approx} 2.8 for solenoidal forcing. We obtain fractal dimension estimates from the density spectra and {delta}-variance scaling, and by using the box counting, mass size, and perimeter area methods applied to the volumetric data, projections, and slices of our turbulent density fields. Our results suggest that compressive forcing yields fractal dimensions significantly smaller compared to solenoidal forcing. However, the actual values depend sensitively on the adopted method, with the most reliable estimates based on the {delta}-variance, or equivalently, on Fourier spectra. Using these methods, we obtain D {approx} 2.3 for compressive and D {approx} 2.6 for solenoidal forcing, which is within the range of fractal dimension estimates inferred from observations (D {approx} 2.0-2.7). The velocity dispersion to size relations for both solenoidal and compressive forcings obtained from velocity spectra follow a power law with exponents in the range 0.4-0.5, in good agreement with previous studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of supersonic separated flow in a compression corner by laser Doppler anemometry

A single-component, computer-operated, three dimensional traversing laser Doppler velocimetry system was designed and constructed for a supersonic wind tunnel. The model was a 10 deg compression corner, providing an example of laminar boundary layer separation. Static pressure data and color schlieren photographs were taken. The Mach number was 2.42 and the Reynolds number was 213,000. The flow was seeded with submicron sized oil droplets. The trend of decreasing upstream influence with increasing Reynolds number was confirmed. Mean velocity profiles provided experimental evidence of reversed flow. Points of separation and reattachment were consistent with those determined by schlieren and pressure scans. The flow was of the laminar type until downstream of reattachment. Individual mean velocity and turbulence profiles, as well as velocity histograms are presented.

Baroth, E. C.↗

Parametrics on 2D Navier-Stokes analysis of a Mach 2.68 bifurcated rectangular mixed-compression inlet

The supersonic diffuser of a Mach 2.68 bifurcated, rectangular, mixed-compression inlet was analyzed using a two-dimensional (2D) Navier-Stokes flow solver. Parametric studies were performed on turbulence models, computational grids and bleed models. The computer flowfield was substantially different from the original inviscid design, due to interactions of shocks, boundary layers, and bleed. Good agreement with experimental data was obtained in many aspects. Many of the discrepancies were thought to originate primarily from 3D effects. Therefore, a balance should be struck between expending resources on a high fidelity 2D simulation, and the inherent limitations of 2D analysis. The solutions were fairly insensitive to turbulence models, grids and bleed models. Overall, the k-e turbulence model, and the bleed models based on unchoked bleed hole discharge coefficients or uniform velocity are recommended. The 2D Navier-Stokes methods appear to be a useful tool for the design and analysis of supersonic inlets, by providing a higher fidelity simulation of the inlet flowfield than inviscid methods, in a reasonable turnaround time.

Mizukami, M.↗

The 3D Navier-Stokes analysis of a Mach 2.68 bifurcated rectangular mixed-compression inlet

The supersonic diffuser of a Mach 2.68 bifurcated, rectangular, mixed-compression inlet was analyzed using a three-dimensional (3D) Navier-Stokes flow solver. A two-equation turbulence model, and a porous bleed model based on unchoked bleed hole discharge coefficients were used. Comparisons were made with experimental data, inviscid theory, and two-dimensional Navier-Stokes analyses. The main objective was to gain insight into the inlet fluid dynamics. Examination of the computational results along with the experimental data suggest that the cowl shock-sidewall boundary layer interaction near the leading edge caused a substantial separation in the wind tunnel inlet model. As a result, the inlet performance may have been compromised by increased spillage and higher bleed mass flow requirements. The internal flow contained substantial waves that were not in the original inviscid design. 3D effects were fairly minor for this inlet at on-design conditions. Navier-Stokes analysis appears to be an useful tool for gaining insight into the inlet fluid dynamics. It provides a higher fidelity simulation of the flowfield than the original inviscid design, by taking into account boundary layers, porous bleed, and their interactions with shock waves.

Mizukami, M.↗

Numerical simulation of the compressible Orszag-Tang vortex 2. Supersonic flow

The numerical investigation of the Orszag-Tang vortex system in compressible magnetofluids will consider initial conditions with embedded supersonic regions. The simulations have initial average Mach numbers 1.0 and 1.5 and beta 10/3 with Lundquist numbers 50, 100, or 200. The behavior of the system differs significantly from that found previously for the incompressible and subsonic analogs. Shocks form at the downstream boundaries of the embedded supersonic regions outside the central magnetic X-point and produce strong local current sheets which dissipate appreciable magnetic energy. Reconnection at the central X-point, which dominates the incompressible and subsonic systems, peaks later and has a smaller impact as M increases from 0.6 to 1.5. Similarly, correlation between the momentum and magnetic field begins significant growth later than in subsonic and incompressible flows. The shocks bound large compression regions, which dominate the wavenumber spectra of autocorrelations in mass density, velocity, and magnetic field.

Picone, J. M.↗

The distortion of a supersonic turbulent boundary layer by bulk compression and surface curvature

An experimental investigation is conducted of the effects of bulk compression and streamline curvature on a turbulent supersonic boundary layer whose incoming Mach number is 2.87. Two different, constant-radius curved wall models were used; the total turning angle in both cases was fixed at 8 deg. While the amplification of the normal stress was approximately the same in both models, the amplification of the shear stress was greater in the one with delta(o)/R value 0.1 than in the model with a value of 0.02. The flow over the latter model appears to be especially complex.

Smits, A. J.↗

Estimation of additive forces and moments for supersonic inlets

A technique for estimating the additive forces and moments associated with supersonic, external compression inlets as a function of mass flow ratio has been developed. The technique makes use of a low order supersonic paneling method for calculating minimum additive forces at maximum mass flow conditions. A linear relationship between the minimum additive forces and the maximum values for fully blocked flow is employed to obtain the additive forces at a specified mass flow ratio. The method is applicable to two-dimensional inlets at zero or nonzero angle of attack, and to axisymmetric inlets at zero angle of attack. Comparisons with limited available additive drag data indicate fair to good agreement.

Perkins, Stanley C., Jr.↗

A Full Navier-Stokes Analysis of Subsonic Diffuser of a Bifurcated 70/30 Supersonic Inlet for High Speed Civil Transport Application

A full Navier-Stokes analysis was performed to evaluate the performance of the subsonic diffuser of a NASA Lewis Research Center 70/30 mixed-compression bifurcated supersonic inlet for high speed civil transport application. The PARC3D code was used in the present study. The computations were also performed when approximately 2.5 percent of the engine mass flow was allowed to bypass through the engine bypass doors. The computational results were compared with the available experimental data which consisted of detailed Mach number and total pressure distribution along the entire length of the subsonic diffuser. The total pressure recovery, flow distortion, and crossflow velocity at the engine face were also calculated. The computed surface ramp and cowl pressure distributions were compared with experiments. Overall, the computational results compared well with experimental data. The present CFD analysis demonstrated that the bypass flow improves the total pressure recovery and lessens flow distortions at the engine face.

Kapoor, Kamlesh↗

Sheaths: A Comparison of Magnetospheric, ICME, and Heliospheric Sheaths

When a supersonic flow encounters an obstacles, shocks form to divert the flow around the obstacle. The region between the shock and the obstacle is the sheath, where the supersonic flow is compressed, heated, decelerated, and deflected. Supersonic flows, obstacles, and thus sheaths are observed on many scales throughout the Universe. We compare three examples seen in the heliosphere, illustrating the interaction of the solar wind with obstacles of three very different scales lengths. Magnetosheaths form behind planetary bow shocks on scales ranging from tens to 100 planetary radii. ICME sheath form behind shocks driven by solar disturbances on scale lengths of a few to tens of AU. The heliosheath forms behind the termination shock due to the obstacle presented by the interstellar medium on scale lengths of tens to a hundred AU. Despite this range in scales some common features have been observed. Magnetic holes, possibly due to mirror mode waves, have been observed in all three of these sheaths. Plasma depletion layers are observed in planetary and ICME sheaths. Other features observed in some sheaths are wave activity (ion cyclotron, plasma), energetic particles, transmission of Alfven waves/shocks, tangential discontinuities turbulence behind quasi-parallel shocks, standing slow mode waves, and reconnection on the obstacle boundary. We compare these sheath regions, discussing similarities and differences and how these may relate to the scale lengths of these regions.

Sibeck, D. G.↗

Assessment of flamelet/progress variable methods for supersonic combustion

Tabulated chemistry models, including the flamelet/progress variable approach, have been successfully used for a variety of turbulent flame simulations. The progress variable describes the progress of reactions in a system and parameterizes a lookup table of thermochemical variables. This approach reduces the cost of simulations, transporting only one scalar (progress variable) instead of the many species mass fractions required for detailed chemistry. Originally developed for low Mach number flame simulations, recent works have focused on extensions of this approach to compressible flames, supersonic combustion, and detonations, with applications such as scramjet combustors and rotating detonation engines. Unlike low Mach simulations, compressible flow simulations require solving the energy transport equation, which is coupled to the equation of state. This leads to additional modeling challenges regarding the thermodynamics and its impact on the chemistry. The validity of modeling assumptions, for example the relationship between energy and temperature, also varies with the combustion regime. The present work provides a detailed assessment of the existing strategies for chemistry tabulation for compressible/supersonic combustion, including detonations. A priori analysis indicates that approximations which are reasonable for weakly compressible flames may break down for shock-induced combustion. Furthermore, the analysis identifies specific assumptions and approximations that do not hold for detonations, emphasizing that care must be taken when applying tabulated chemistry models outside their intended combustion regimes.

Detonations↗

Fast pressure probe measurements of a high-velocity plasma plume

This article reports measurements of stagnation pressure on a contoured coaxial gun, now installed at the Maryland Centrifugal Experiment [R. Ellis et al., Phys. Plasmas 12, 055704 (2005)]. The impact of the plasma on the stationary probe is consistent with adiabatic compression and supersonic flow. Measured pressure signals are consistent with a shock traveling at 110 km/s and a following flow with speed of 90 km/s. At late times, the pressure profile is consistent with an adiabatically expanding plasma that fills the vacuum chamber.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large perturbation flow field analysis and simulation for supersonic inlets

An analysis technique for simulation of supersonic mixed compression inlets with large flow field perturbations is presented. The approach is based upon a quasi-one-dimensional inviscid unsteady formulation which includes engineering models of unstart/restart, bleed, bypass, and geometry effects. Numerical solution of the governing time dependent equations of motion is accomplished through a shock capturing finite difference algorithm, of which five separate approaches are evaluated. Comparison with experimental supersonic wind tunnel data is presented to verify the present approach for a wide range of transient inlet flow conditions.

Varner, M. O.↗

Numerical algorithm conjugating steady and transient, separated, compressible flow and a solid body having arbitrarily distributed heat sources

A numerical algorithm that is second-order accurate in time has been developed for the conjugated problem of a separated, compressible flow field and a conductive solid body. The full two-dimensional time-dependent Navier-Stokes equations are coupled with the time-dependent energy equation for the solid body and are solved simultaneously. using implicit algorithms. The energy equation for the solid body may include arbitrarily distributed heat sources. The algorithm has been exmined for the case of two-dimensional supersonic compression-corner interaction, with a heat source embedded in the wall in the vicinity of the separation bubble and the attached boundary layer. The effect of the heat source on the flow field is studied for steady and transient cases.

Degani, D.↗