Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stability criteria”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Improved limits on intergalactic intracluster H I in the Coma Cluster

New observations using the Arecibo telescope have failed to detect intergalactic intracluster H I in the Coma Cluster. This represents a factor of two improvements over our previously reported limit (Wright et al., 1974) and makes it less likely that the cluster can be dynamically bound by H I. The highly flattened, rapidly rotating, extremely dense, cold H I clouds permitted by the observations will not evaporate over the cluster lifetime, but violate global stability criteria and hence cannot provide the missing mass in the cluster.

Tarter, J. C.↗

The dynamics and control of large flexible space structures. Volume 3, part B: The modelling, dynamics, and stability of large Earth pointing orbiting structures

The dynamics and stability of large orbiting flexible beams, and platforms and dish type structures oriented along the local horizontal are treated both analytically and numerically. It is assumed that such structures could be gravitationally stabilized by attaching a rigid light-weight dumbbell at the center of mass by a spring loaded hinge which also could provide viscous damping. For the beam, the small amplitude inplane pitch motion, dumbbell librational motion, and the anti-symmetric elastic modes are all coupled. The three dimensional equations of motion for a circular flat plate and shallow spherical shell in orbit with a two-degree-of freedom gimballed dumbbell are also developed and show that only those elastic modes described by a single nodal diameter line are influenced by the dumbbell motion. Stability criteria are developed for all the examples and a sensitivity study of the system response characteristics to the key system parameters is carried out.

Bainum, P. M.↗

A two-dimensional finite-difference solution for the transient thermal behavior of a tubular solar collector

A numerical procedure was established using the finite-difference technique in the determination of the time-varying temperature distribution of a tubular solar collector under changing solar radiancy and ambient temperature. Three types of spatial discretization processes were considered and compared for their accuracy of computations and for selection of the shortest computer time and cost. The stability criteria of this technique were analyzed in detail to give the critical time increment to ensure stable computations. The results of the numerical analysis were in good agreement with the analytical solution previously reported. The numerical method proved to be a powerful tool in the investigation of the collector sensitivity to two different flow patterns and several flow control mechanisms.

Lansing, F. L.↗

A dynamic analysis of the motion of a low-wing general aviation aircraft about its calculated equilibrium flat spin mode

The properties of the flat spin mode of a general aviation configuration have been studied through analysis of rotary balance data, numerical simulation, and analytical study of the equilibrium state. The equilibrium state is predicted well from rotary balance data. The variations of yawing moment and pitching moment as functions of sideslip have been shown to be of great importance in obtaining accurate modeling. These dependencies are not presently available with sufficient accuracy from previous tests or theories. The stability of the flat spin mode has been examined extensively using numerical linearization, classical perturbation methods, and reduced order modeling. The stability exhibited by the time histories and the eigenvalue analyses is shown to be strongly dependent on certain static cross derivatives and more so on the dynamic derivatives. Explicit stability criteria are obtained from the reduced order models.

Tischler, M. B.↗

On the dynamics of large orbiting flexible beams and platforms oriented along the local horizontal

The dynamics and stability of large orbiting flexible beams and platforms oriented along the local horizontal are treated both analytically and numerically. It is assumed that such structures could be gravitationally stabilized by attaching a rigid lightweight dumbbell at the center of mass by a spring loaded hinge which also could provide viscous damping. For the beam it is seen that the small amplitude inplane pitch motion, dumbbell librational motion, and the anti-symmetric elastic modes are all coupled. The three dimensional equations of motion for a circular flat plate in orbit with a two-degree-of-freedom gimballed dumbbell are also developed and show that only those elastic modes described by a single nodal diameter line are influenced by the dumbbell motion. Stability criteria are developed for both examples and a parametric study of the least damped mode characteristics together with numerically simulated transient responses are carried out.

Bainum, P. M.↗

The properties of close multiple stars

A reexamination of the properties of close multiple systems is conducted, taking into account recent numerical, analytical, and observational results. The orbital elements of 43 spectroscopic multiple systems are presented in a table. Tables with photometry data of the systems and data describing their properties are also provided. Attention is given to period ratios, mass ratios, orbital coplanarity, stability, lithium abundances and age estimates, and prospects of future observations. Numerical studies indicate that fragmentation produces binary components with mass ratios usually close to 1.0, while fission usually produces mass ratios in the range 0.1-0.5. Using analytical stability criteria, all 27 close multiple systems considered are stable if they are corotating. If they are counter-rotating, four systems are possibly unstable. However, other factors suggest that even these four are probably stable. The solar-type close multiple systems ranged in age from 100 million years to 2,000 million years.

Fekel, F. C., Jr.↗

Analytic solutions of the radial pulsation equation for rotating and magnetic star models

Eddington's (1926) form of wave equation for small-amplitude, radial, adiabatic stellar pulsations of spherically symmetric, gaseous stars is generalized to include the effects of axial rotation and tangled magnetic fields. Equilibrium quantities possessing dimensions are affected, and the relative importance of rotation and magnetism in affecting pulsation characteristics of the models depends on the choices of gamma and the type of model. Solutions are obtained in closed form for adiabatic pulsation periods of fine analytic stellar models, and nonadiabatic stability criteria are determined by means of the one-zone stellar model. Results are discussed for a range of physical parameters such as rotational angular momenta, central condensations, and magnetic energies; and applications are made to the case of classical Cepheids and other variable giant stars.

Stothers, R.↗

Pulsed radiolysis of model aromatic polymers and epoxy based matrix materials

Models of primary processes leading to deactivation of energy deposited by a pulse of high energy electrons were derived for epoxy matrix materials and polyl-vinyl naphthalene. The basic conclusion is that recombination of initially formed charged states is complete within 1 nanosecond, and subsequent degradation chemistry is controlled by the reactivity of these excited states. Excited states in both systems form complexes with ground state molecules. These excimers or exciplexes have their characteristics emissive and absorptive properties and may decay to form separated pairs of ground state molecules, cross over to the triplet manifold or emit fluorescence. ESR studies and chemical analyses subsequent to pulse radiolysis were performed in order to estimate bond cleavage probabilities and net reaction rates. The energy deactivation models which were proposed to interpret these data have led to the development of radiation stabilization criteria for these systems.

Gupta, A.↗

The size and shape of equilibrium capillary surfaces

The classical theory of capillary is concerned largely with size and shape estimates in symmetric asymptotic configurations. Recent developments leading to global results for all symmetric cases, and to qualitative information on asymptotic properties are discussed. Additional stability criteria are described. Asymmetric situations leading to behavior that differs strikingly from the symmetric case are discussed. When gravity vanishes, capillary surfaces in the accustomed sense may not appear. The question of characterizing those tubes in which surfaces can be found has partially been settled. Progress toward determining the effects of contact angle hysteresis in cases of particular interest is reported.

Finn, R.↗

Convective and morphological instability in vapor crystal growth

Theoretical and experimental work on the fluid dynamics of physical vapor transport is reported. It is shown that diffusion in viscous interaction with container walls leads to concentration gradients normal to the main transport direction. Consequently any convection threshold is removed. This coupling with convective instabilities makes the theoretical interpretation of earthbound (anisotropic) morphological stability studies on vapor-solid interfaces intractable. Hence low-gravity experiments are suggested that will allow for the establishment of morphological stability criteria under diffusion controlled conditions.

Rosenberger, F.↗

An Analysis of Wave Interactions in Swept-Wing Flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. Streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. The crossflow/Tollmien-Schlichting wave interaction was modeled as a secondary instability. The effects of suction are included, and different stability criteria are examined. The results are applied to laminar flow control wings characteristic of energy-efficient aircraft designs.

Reed, H. L.↗

The Effect of Solidification Rate on Morphological Stability

At low solidification rates, the criterion for the onset of morphological instability parallels closely the criterion of constitutional supercooling. At somewhat larger rates of solidification, however, the results of the perturbation theory of morphological instability differ significantly from the predictions of constitutional supercooling. This arises because the critical wave length for instability decreases as solidification rate increases and thus the effects of capillarity (solid-liquid surface tension) play a strong stabilizing role. This gives rise to the concept of absolute stability, according to which the system will always be stable for a sufficiently large rate of solidification. This enhanced stabilization by capillarity is present only so long as local equilibrium is maintained at the solid-liquid interface. If the interfacial temperature drops below its equilibrium value by an amount dependent on growth rate, oscillatory morphological instabilities can occur. The differences among these various stability criteria are illustrated by means of some simple two-dimensional diagrams that should supplant the conventional plots of (temperature gradient)/(growth rate) vs. alloy concentration.

Sekerka, R. F.↗

Vector Lyapunov Functions for Stochastic Interconnected Systems

Theoretical paper presents set of sufficient conditions for asymptotic and exponential stability with probability 1 for class of stochastic interconnected systems. Theory applicable to complicated, large-scale mechanical or electrical systems, and, for several design problems, it reduces computational difficulty by relating stability criteria to fundamental structural features of system.

Boussalis, D.↗

On the numerical computation of nonlinear force-free magnetic fields

An algorithm has been developed to extrapolate nonlinear force-free magnetic fields from a source surface, given the proper boundary conditions. The results of this work; describing the mathematical formalism that was developed, the numerical techniques employed, and the stability criteria developed for these numerical schemes are presented. An analytical solution is used for a test case; the results show that the computational accuracy for the case of a nonlinear force-free magnetic field was on the order of a few percent ( 5%).

Wu, S. T.↗

A survey of unified constitutive theories

The state of the art of time temperature dependent elastic viscoplastic constitutive theories which are based on the unified approach werre assessed. This class of constitutive theories is characterized by the use of kinetic equations and internal variables with appropriate evolutionary equations for treating all aspects of inelastic deformation including plasticity, creep, and stress relaxation. More than 10 such unified theories which are shown to satisfy the uniqueness and stability criteria imposed by Drucker's postulate and Ponter's inequalities are identified. The theories are compared for the types of flow law, kinetic equation, evolutionary equation of the internal variables, and treatment of temperature dependence. The similarities and differences of these theories are outlined in terms of mathematical formulations and illustrated by comparisons of theoretical calculations with experimental results which include monotonic stress-strain curves, cyclic hysteresis loops, creep and stress relaxation rates, and thermomechanical loops. Numerical methods used for integrating these stiff time temperature dependent constitutive equations are reviewed.

Chan, K. S.↗

Difference equation technique for determining the evolution of radially symmetric ultrasonic fields

A simplified difference equation technique has been developed to calculate the three-dimensional evolution of radially symmetric, complex ultrasonic fields. The parabolic approximation to the Helmholtz equation is obtained by assuming that localized changes in the magnitude of the field with respect to distance along the axis of propagation are small compared to those with respect to radial displacement. The Helmholtz equation in cylindrical coordinates may then be approximated, after separating variables, using truncated series expansions. The resulting difference equation determines complex field values at discrete locations in a plane using corresponding adjacent locations in the preceding plane. Stability criteria which determine acceptable values for various parameters are discussed. The technique has been applied to the propagation of ultrasonic fields generated by two-dimensional focusing and non-focusing, uniform and Gaussian profile, piezoelectric transducers in both profiled and non-profiled media.

Dockery, G. D.↗

Dendritic solidification. I - Analysis of current theories and models. II - A model for dendritic growth under an imposed thermal gradient

A critical review of the present dendritic growth theories and models is presented. Mathematically rigorous solutions to dendritic growth are found to rely on an ad hoc assumption that dendrites grow at the maximum possible growth rate. This hypothesis is found to be in error and is replaced by stability criteria which consider the conditions under which a dendrite tip advances in a stable fashion in a liquid. The important elements of a satisfactory model for dendritic solidification are summarized and a theoretically consistent model for dendritic growth under an imposed thermal gradient is proposed and described. The model is based on the modification of an analysis due to Burden and Hunt (1974) and predicts correctly in all respects, the transition from a dendritic to a planar interface at both very low and very large growth rates.

Laxmanan, V.↗

The development of optimal control laws for orbiting tethered platform systems

A mathematical model of the open and closed loop in orbit plane dynamics of a space platform-tethered-subsatellite system is developed. The system consists of a rigid platform from which an (assumed massless) tether is deploying (retrieving) a subsatellite from an attachment point which is, in general, offset from the platform's mass center. A Langrangian formulation yields equations describing platform pitch, subsatellite tetherline swing, and varying tether length motions. These equations are linearized about the nominal station keeping motion. Control can be provided by both modulation of the tether tension level and by a momentum type platform-mounted device; system controllability depends on the presence of both control inputs. Stability criteria are developed in terms of the control law gains, the platform inertia ratio, and tether offset parameter. Control law gains are obtained based on linear quadratic regulator techniques. Typical transient responses of both the state and required control effort are presented.

Bainum, P. M.↗