Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Materials Data on Sr(AlGa)2 by Materials Project

Sr(GaAl)2 crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. Sr is bonded in a 8-coordinate geometry to eight equivalent Ga and eight equivalent Al atoms. All Sr–Ga bond lengths are 3.38 Å. All Sr–Al bond lengths are 3.54 Å. Ga is bonded in a 9-coordinate geometry to four equivalent Sr, one Ga, and four equivalent Al atoms. The Ga–Ga bond length is 2.59 Å. All Ga–Al bond lengths are 2.66 Å. Al is bonded to four equivalent Sr and four equivalent Ga atoms to form a mixture of distorted edge, face, and corner-sharing AlSr4Ga4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on Sr(Mg4Al3)4 by Materials Project

Sr(Mg4Al3)4 crystallizes in the cubic I-43m space group. The structure is three-dimensional. Sr is bonded in a 12-coordinate geometry to four equivalent Mg and twelve equivalent Al atoms. All Sr–Mg bond lengths are 3.33 Å. All Sr–Al bond lengths are 3.28 Å. There are two inequivalent Mg sites. In the first Mg site, Mg is bonded in a 10-coordinate geometry to one Sr, three equivalent Mg, and six equivalent Al atoms. All Mg–Mg bond lengths are 3.04 Å. All Mg–Al bond lengths are 3.22 Å. In the second Mg site, Mg is bonded in a 12-coordinate geometry to seven Mg and five equivalent Al atoms. There are two shorter (3.12 Å) and four longer (3.19 Å) Mg–Mg bond lengths. There are a spread of Mg–Al bond distances ranging from 2.86–3.18 Å. Al is bonded in a 11-coordinate geometry to one Sr, seven Mg, and three equivalent Al atoms. There are one shorter (2.74 Å) and two longer (2.84 Å) Al–Al bond lengths.

36 MATERIALS SCIENCE↗

Materials Data on Sr(ClO)2 by Materials Project

Sr(OCl)2 crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. Sr is bonded in a 8-coordinate geometry to two equivalent O and six equivalent Cl atoms. Both Sr–O bond lengths are 3.08 Å. There are a spread of Sr–Cl bond distances ranging from 2.95–3.07 Å. O is bonded in a water-like geometry to one Sr and one O atom. The O–O bond length is 1.24 Å. Cl is bonded in a distorted trigonal non-coplanar geometry to three equivalent Sr atoms.

36 MATERIALS SCIENCE↗

Materials Data on Sr by Materials Project

Sr crystallizes in the hexagonal P6/mmm space group. The structure is one-dimensional and consists of one Sr ribbon oriented in the (0, 0, 1) direction. Sr is bonded in a linear geometry to two equivalent Sr atoms. Both Sr–Sr bond lengths are 4.60 Å.

36 MATERIALS SCIENCE↗

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La 3 Ni 2 O 7

Abstract Recently, superconductivity at high temperatures is observed in bulk La 3 Ni 2 O 7−δ under high pressure. However, the attainment of high‐purity La 3 Ni 2 O 7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La 3 Ni 2 O 7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La 3 Ni 2 O 7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni 2+ /Ni 3+ in Sr‐doped La 3 Ni 2 O 7 , aligning them with those of “La 3 Ni 2 O 7.05” , thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La 3 Ni 2 O 7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La 3 Ni 2 O 7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La 3 Ni 2 O 7−δ , despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

36 MATERIALS SCIENCE↗

Tracking natural CO 2 migration through a sandstone aquifer using Sr, U and C isotopes: Chimayó, New Mexico, USA

The geochemical and isotopic characteristics of groundwaters in Chimayó, New Mexico, reflect processes that affect water quality in the Tesuque Aquifer, which overlies a leaking natural CO 2 source in a structurally complex region. In this study, select isotopes (δ 13 C, 87 Sr/ 86 Sr, 234 U/ 238 U) are applied to groundwaters to better understand CO 2 transport mechanisms and related water-rock interactions that impact Chimayó groundwater. Carbon stable isotope ratios of dissolved inorganic carbon (DIC; δ 13 CDIC = -15.10‰ to 4.50‰) identify a distinct source of upward-migrating CO 2 that interacts with the groundwater. Additionally, groundwater 87 Sr/ 86 Sr compositions (0.7098 to 0.7154) reflect intrusion of varying amounts of saline water associated with the high CO 2 source, while 234 U/ 238 U ratios corroborate presence of deep groundwater and suggest impacts from distinctive natural uranium sources are affecting groundwater. Previous work proposed two CO 2 transport mechanisms at the site: (1) dissolved in deep brine that underlies the aquifer and (2) in the gas phase; this study uses isotope mixing models to identify wells that are affected by these CO 2 transport mechanisms and demonstrates that both transport mechanisms are associated with impaired groundwaters. Overall, this study demonstrates that applying multiple isotope systems (δ 13 CDIC, 87 Sr/ 86 Sr, 234 U/ 238 U) is a dynamic tool for identifying and measuring the impact of CO 2 leakage from a sequestration site.

58 GEOSCIENCES↗

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗

2D Homologous Series SrFM n BiS n +2 (M = Pb, Ag 0.5 Bi 0.5 ; n = 0, 1) and Commensurately Modulated Sr 2 F 2 Bi 2/3 S 2

In this work, we report three new mixed-anion two-dimensional (2D) compounds: SrFPbBiS 3 , SrFAg 0.5 Bi 1.5 S 3 , and Sr 2 F 2 Bi 2/3 S 2 . Their structures as well as the parent compound SrFBiS 2 were refined using single-crystal X-ray diffraction data, with the sequence of SrFBiS 2 , SrFPbBiS 3 , and SrFAg 0.5 Bi 1.5 S 3 defining the new homologous series SrFM n BiS n+2 (M = Pb, Ag 0.5 Bi 0.5 ; n= 0, 1). Sr 2 F 2 Bi 2/3 S 2 has a different structure, which is modulated with a q vector of 1/3b* and was refined in superspace group X2/m(0 β 0)00 as well as in the 1x3x1 superstructure with space group C2/m (with similar results). Sr 2 F 2 Bi 2/3 S 2 features hexagonal layers of alternating [Sr 2 F 2 ] 2+ and [Bi 2/3 S 2 ] 2- , and the modulated structure arises from the unique ordering pattern of Sr 2+ cations. SrFPbBiS 3 , SrFAg 0.5 Bi 1.5 S 3 , and Sr 2 F 2 Bi 2/3 S 2 are semiconductors with band gaps of 1.31, 1.21, and 1.85 eV, respectively. The latter compound exhibits room temperature red photoluminescence at ~ 700 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling Swift Heavy Ion Track Morphology in Sr-Based High-Entropy Perovskites

The incorporation of multiple cations on a single lattice site in the high-entropy oxides is considered the key driving factor for modifying the known atomic-level response to energetic ion irradiation due to the presence of structural disorder; however, these effects are not well-understood yet. In this work, we present atomic-level insight into irradiation-induced nanoscale phase transformations in a perovskite-structured high-entropy oxide, Sr(Zr 0.2 Sn 0.2 Ti 0.2 Hf 0.2 Nb 0.2 )O 3 (Sr(HE)O 3 ), subjected to 774 MeV swift Xe heavy ions, where damage is dominated by inelastic ion−lattice interactions. While these ions generally are known to create nanoscale disordered channels, “ion tracks”, along the penetration direction in the material, this study shows the formation of discontinuous and partially recrystallized ion tracks in Sr(HE)O 3 . Compared to SrTiO 3 irradiated under identical energy loss conditions, the ion tracks in Sr(HE)O 3 exhibit significantly reduced diameters and a markedly different interfacial structure. Notably, the crystalline−amorphous interface in Sr(HE)O 3 shows minimal lattice distortion, confined to approximately 2−3 monolayers, in contrast to the extended disordered shell commonly observed in SrTiO 3 . Using in situ atomic-resolution electron microscopy, we further demonstrate that the amorphous/disordered regions within Sr(HE)O 3 ion tracks remain highly stable under electron irradiation, whereas tracks in SrTiO 3 readily recrystallize. This enhanced stability is attributed to the dominance of structural and chemical complexity arising from multiple B-site cations, which suppress defect migration and templated recrystallization driven by electronic excitations and local heating. Overall, this study highlights how high-entropy oxide chemistry fundamentally reshapes irradiation damage evolution, offering insights into defect formation and phase stability under extreme conditions.

36 MATERIALS SCIENCE↗

Ba 1−x Sr x FeO 3−δ as an improved oxygen storage material for chemical looping air separation: a computational and experimental study

Chemical looping air separation (CLAS) is a promising technology to generate oxygen-rich gas streams to enable efficient carbon dioxide capture during fossil fuel combustion or gasification. CLAS relies on the capture and release of oxygen from the atmosphere using the redox properties of an oxygen-selective solid oxide carrier. This study investigates the redox characteristics of Ba 1−x Sr x FeO 3−δ (0.0 ≤ x ≤ 0.417, 0.0 ≤ δ ≤ 0.5) using a combination of density functional theory (DFT) calculations and experimental verification using X-ray diffraction, thermogravimetric analysis, and oxygen-temperature-programmed desorption. The DFT computed energies of the Ba 1−x Sr x FeO 3−δ perovskites reveal a composition-dependent transition from hexagonal to cubic phases as the Sr-concentration or oxygen vacancy concentration increases. Oxygen vacancy formation energies of the cubic perovskites are found to be lower than those of their hexagonal counterparts. A low oxygen diffusion barrier of ∼1 eV combined with the thermodynamic preference of Ba 1−x Sr x FeO 3−δ compositions that form in a cubic phase suggests them as promising candidates for oxygen storage applications. The experimental results corroborate this finding by identifying Ba 0.75 Sr 0.25 FeO 3−δ in the cubic phase as an optimal composition offering low-temperature oxygen storage capacities comparable to that of the state-of-the-art Sr 0.75 Ca 0.25 FeO 3−δ perovskite oxygen storage material at 325 °C and 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles thermodynamic assessment of Sr-containing secondary phase formation in strontium-substituted lanthanum manganites for solid oxide cell applications

Sr-secondary phase formation is a potentially significant degradation mode with direct impact upon solid-oxide cell (SOC) commercial viability. A first-principles based thermodynamic study was performed for La 1−x Sr x MnO 3±δ (LSM) perovskites to assess their stability against formation of different Sr-secondary phases, including SrO, SrCrO 4 , SrSO 4 , SrCO 3 , and Sr(OH) 2 , for SOC applications. The Sr-secondary phase formation reaction free energies were determined via a thermodynamic model by combining ab initio lattice dynamics calculations for the solid phases and ab initio thermodynamic data for the gas phases. The current approach expands the previously reported thermodynamic modeling studies by integrating first-principles based point defect equilibria into the thermodynamic analysis. The modeling results obtained using this new approach indicate an increased tendency to form the SrO oxide upon decreasing the oxygen partial pressure. Additionally, the enhancing factors to form the Sr-related secondary phase from the associated SrO activity in LSM are further quantified by considering the equilibrium of SrO reacting with the contaminant gas species as a function of temperature and pressure.

defect thermodynamics modeling↗

Moderate-temperature solution-processed synthesis of incommensurate Sr 8/7 TiS 3 thin films and rod-shaped nanocrystals

The chalcogenide perovskite family has been steadily gaining increasing attention from the research community due to its optoelectronic properties and potential for diverse applications. While BaZrS 3 and BaTiS 3 have been the most extensively studied, other promising compounds in this family, such as Sr x TiS 3 (1.05 < x < 1.22), are now being explored for various optical, optoelectronic, and energy storage applications. However, challenges remain in achieving the low-temperature synthesis of Sr x TiS 3 . In this study, we report, for the first time, the synthesis of Sr x TiS 3 nanocrystals at temperatures below 400 °C. The synthesized nanocrystals exhibit a rod-like morphology. Additionally, we have developed solution-processing routes to synthesize phase-pure Sr x TiS 3 thin films, marking the first reported instance of such films, at temperatures below 600 °C. We also demonstrate the solid-state synthesis of Sr x TiS 3 powder below 600 °C. Our work paves the way for new and exciting application avenues for Sr x TiS 3 .

36 MATERIALS SCIENCE↗

Revealing the intrinsic transport properties of antiperovskite Sr 3 SnO thin films

A topologically non-trivial band structure and reports of superconductivity have motivated significant investigation into the transport properties of the antiperovskite oxide Sr 3 SnO. Phase-pure films of Sr 3 SnO can be grown by molecular beam epitaxy, but they do not have the required extremely high hole-doping densities (>1 × 10 21 cm –3 ) for which superconductivity has been observed in bulk materials. To date, high hole-doping densities have been achieved via inducing strontium deficiency, which inevitably results in impurity phases. Here, we show that indium acts as an effective hole dopant in Sr 3 SnO and can be used to achieve high hole doping densities in stoichiometric films. Films with carrier densities as high as 1.5 × 10 21 cm –3 remain non-superconducting. We, therefore, suggest that Sr 3 SnO is probably not an intrinsic superconductor. A second question addressed in this work is the measurement of the intrinsic electrical transport properties of Sr 3 SnO, given its rapid degradation in air. We show that even in inert atmospheres, reducing the time needed for establishing electrical contacts and protecting the Sr 3 SnO film result in improved electrical properties. Here, we demonstrate low carrier density films (4 × 10 18 cm –3 ) with carrier mobilities of 400 cm 2 V –1 s –1 at 10 K.

36 MATERIALS SCIENCE↗

Single crystal growth and electronic structure of Rh-doped Sr 3 Ir 2 O 7

Ruddlesden-Popper iridate Sr 3 Ir 2 O 7 is a spin–orbit coupled Mott insulator. Hole doped Sr 3 Ir 2 O 7 provides an ideal platform to study the exotic quantum phenomena that occur near the metal–insulator transition (MIT) region. Rh substitution of Ir is an effective method to induce hole doping into Sr 3 Ir 2 O 7 . However, the highest doping level reported in Sr 3 (Ir 1− x Rh x ) 2 O 7 single crystals was only around 3%, which is far from the MIT region. In this paper, we report the successful growth of single crystals of Sr 3 (Ir 1− x Rh x ) 2 O 7 with a doping level of ~ 9%. The samples have been fully characterized, demonstrating the high quality of the single crystals. Transport measurements have been carried out, confirming the tendency of MIT in these samples. The electronic structure has also been examined by angle-resolved photoemission spectroscopy (ARPES) measurements. Our results establish a platform to investigate the heavily hole doped Sr 3 Ir 2 O 7 compound, which also provide new insights into the MIT with hole doping in this material system.

Physics↗

Electronic properties of epitaxial La 1- x Sr x RhO 3 thin films

Here, we report on the synthesis and electronic properties of epitaxial perovskite La 1- x Sr x RhO 3 thin films. Thin films with a Sr content ranging from $\textit{x}$ = 0 to 0.5 have been grown using molecular beam epitaxy. Transport and x-ray photoemission spectroscopy data reveal an insulator-metal-insulator transition, accompanied by a $\textit{p-}$ to $\textit{n}-$ type carrier change observed in Hall measurements. Combined with theoretical calculations, we find that the addition of Sr does not directly dope carriers into the conduction band, but rather induces localized Rh 4$\textit{d}$ states within the LaRhO 3 band gap. The bandwidth of the impurity band increases with Sr content, eventually causing the valence band (VB) and the localized Rh 4$\textit{d}$ band to overlap, which explains the first insulator-to-metal transition occurring at $\textit{x}$ = 0.35. For Sr content $\textit{x}$ > 0.4, possible cation ordering results in an increase of the gap between the VB and the Rh 4$\textit{d}$ band, leading to the second metal-to-insulator transition. We map out the electronic phase diagram of the Sr-doped LaRhO 3 system and suggest strategies to engineer the electronic states in rhodate systems via delocalizing the Rh 3+ states.

36 MATERIALS SCIENCE↗

Cross sections and calculated yields of some radionuclides of yttrium, strontium and rubidium formed in proton-induced reactions on enriched strontium-86: possibility of production of 85g Sr, 83 Rb and 82m Rb in no-carrier-added form

Here, cross sections of the 86 Sr(p,3n) 84m Y, 86 Sr(p,αn) 82m Rb, and 86 Sr(p,x) 85g Sr reactions were measured from their respective thresholds up to 16.2 MeV and from 23.0 to 44.1 MeV at FZJ, and from 14.3 to 24.5 MeV at LBNL, using 96.4% enriched 86 SrCO 3 as target material. Thin targets prepared by sedimentation were irradiated with protons in a stacked-form, and the induced radioactivity was measured by high-resolution γ-ray spectrometry. Nuclear model calculations based on the code TALYS reproduced our experimental cross section data well. From the excitation functions, the integral yields of the above three radionuclides were calculated. The yield of 85g Sr via the natSr(n,γ) process was also measured using the TRIGA Mark-II reactor at AERE, Savar. A comparison of the reactor and cyclotron production of carrier-added 85g Sr is given. The production possibilities of the three investigated radionuclides in no-carrier-added forms at a 30 MeV cyclotron via new routes are discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Materials Data on Sr(NiGe)2 by Materials Project

SrNi2Ge2 crystallizes in the tetragonal I4/mmm space group. The structure is three-dimensional. Sr is bonded in a 8-coordinate geometry to eight equivalent Ni and eight equivalent Ge atoms. All Sr–Ni bond lengths are 3.32 Å. All Sr–Ge bond lengths are 3.30 Å. Ni is bonded in a 4-coordinate geometry to four equivalent Sr and four equivalent Ge atoms. All Ni–Ge bond lengths are 2.38 Å. Ge is bonded in a 9-coordinate geometry to four equivalent Sr, four equivalent Ni, and one Ge atom. The Ge–Ge bond length is 2.89 Å.

36 MATERIALS SCIENCE↗

Materials Data on Sr(PO3)2 by Materials Project

Sr(PO3)2 crystallizes in the monoclinic P2_1 space group. The structure is three-dimensional. there are four inequivalent Sr2+ sites. In the first Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Sr–O bond distances ranging from 2.53–3.03 Å. In the second Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Sr–O bond distances ranging from 2.53–3.05 Å. In the third Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Sr–O bond distances ranging from 2.53–3.04 Å. In the fourth Sr2+ site, Sr2+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of Sr–O bond distances ranging from 2.53–2.96 Å. There are eight inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.50–1.61 Å. In the second P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.50–1.61 Å. In the third P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There is two shorter (1.50 Å) and two longer (1.61 Å) P–O bond length. In the fourth P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.50–1.61 Å. In the fifth P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There are a spread of P–O bond distances ranging from 1.50–1.61 Å. In the sixth P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There is two shorter (1.50 Å) and two longer (1.61 Å) P–O bond length. In the seventh P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There is two shorter (1.50 Å) and two longer (1.61 Å) P–O bond length. In the eighth P5+ site, P5+ is bonded to four O2- atoms to form corner-sharing PO4 tetrahedra. There is two shorter (1.50 Å) and two longer (1.61 Å) P–O bond length. There are twenty-four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the third O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the fourth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two P5+ atoms. In the fifth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two P5+ atoms. In the sixth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the seventh O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the eighth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two P5+ atoms. In the tenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two P5+ atoms. In the eleventh O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the twelfth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the thirteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two P5+ atoms. In the fourteenth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the fifteenth O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the sixteenth O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the seventeenth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the eighteenth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom. In the nineteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two P5+ atoms. In the twentieth O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the twenty-first O2- site, O2- is bonded in a bent 150 degrees geometry to two P5+ atoms. In the twenty-second O2- site, O2- is bonded in a distorted single-bond geometry to two Sr2+ and one P5+ atom. In the twenty-third O2- site, O2- is bonded in a bent 150 degrees geometry to two P5+ atoms. In the twenty-fourth O2- site, O2- is bonded in a 1-coordinate geometry to two Sr2+ and one P5+ atom.

36 MATERIALS SCIENCE↗