Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spintronic devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observation of Topological Chirality Switching Induced Freezing of a Skyrmion Crystal

Magnetic skyrmions are topologically protected quasi-particles with a well-defined chirality. Control over their chirality is proposed as an additional feature for encoding data bits or as qubits in quantum computing due to their high efficiency and stability against achiral magnetic textures. Here it is shown that an in-plane magnetic field can be utilized to reshape the energy barriers between different skyrmionic bubbles (e.g., Bloch type, type-II) enabling spontaneous chirality fluctuations with a frequency that increases with the strength of the in-plane field. The insulating van der Waals ferromagnet CrBr3 is used as an archetypal system for low damping, reduced energy dissipation and a high number of magnetic phases to capture the chirality dynamics in real time through cryo-Lorentz transmission electron microscopy. It is observed that the interplay between the intrinsic Dzyaloshinskii–Moriya interaction and out-of-plane field biased the chirality dynamics, favoring one handedness over the other. A remarkable consequence of the spontaneous chirality switching mechanism is that it induces a freezing (or crystallization) process in the skyrmion lattice. As the bubbles fluctuate between Bloch and type-II they elongate and shrink parallel to the in-plane field. Subsequently, the overall lattice crystallizes along the in-plane field direction, inducing a phase transition from a disordered liquid state to a hexatic phase where skyrmions are highly ordered resembling that of a solid. The results indicate chirality as an active element in the creation of topologically protected skyrmion crystals unveiling pathways toward chiral spintronic device platforms with tunable embedded configuration.

2D Phase Transition↗
DOE OSTI2026

Atomically Resolved Acoustic Dynamics Coupled with Magnetic Order in a Van der Waals Antiferromagnet

Magnetoelastic coupling in van der Waals (vdW) magnetic materials enables a unique interplay between the spin and lattice degrees of freedom. Characterizing the elastic responses with atomic and femtosecond resolution across the magnetic transition is essential for guiding the design of magnetically tunable actuators and strain-mediated spintronic devices. Here, ultrafast X-ray diffraction employed at a free-electron laser reveals that the atomic displacements, wave vectors, and dispersion relations of acoustic phonon modes in a vdW antiferromagnet FePS3 are coupled with the magnetic order, by tracking both in-plane and out-of-plane Bragg peaks upon optical excitation across the Néel temperature (TN). One transverse mode shows that a quasi-out-of-plane atomic displacement undergoes a significant directional change across TN. Its quasi-in-plane wave vector is derived by comparing the measured sound velocity and the first-principles calculations. The other transverse mode is an interlayer shear acoustic mode whose amplitude is strongly enhanced in the antiferromagnetic phase, exhibiting eight times stronger amplitude than the longitudinal acoustic mode below TN. The atomically resolved characterization of acoustic phonon dynamics that couple with magnetic ordering opens opportunities for harnessing unique magnetoelastic coupling in vdW magnets on ultrafast timescales.

coherent acoustic phonons↗
DOE OSTI2025

Solution‐Processed Spin‐Polarized Light‐Emitting Diodes of Colloidal Quantum Wells and Magnetic Nanoparticles

Electrical injection of spin-polarized carriers into semiconductors enables circularly-polarized emission from spin-polarized light-emitting diodes (spin-LEDs). The incredible level of tunability of magnetic and electronic properties in colloidal nanocrystals offers unprecedented opportunities for the modulation of polarization of light in solution-processed spin-LEDs based on magnetic nanoparticles unlike epitaxially grown spin-LEDs restricted by a very limited range of materials for their exploitation, and solution-processed spin-LEDs based on chiral molecules, which do not allow the modulation of polarization in general. Here, it is shown that electrical injection of spin-polarized electrons from magnetic Fe 3 O 4 nanoparticles into CdSe/CdZnS core/shell colloidal quantum wells (CQWs) in solution-processed LEDs that allows for polarization modulation of electroluminescence. In this structure, a monolayer of face-down oriented CQWs is deposited as an active layer to avoid polarization losses due to the hopping of the electrons between the CQWs before the radiative recombination process. In this solution-processed spin-LED, the circular polarization reaches 4.5% at 3 K and survives up to 100 K. A net circular polarization is observed at zero magnetic field up to 100 K because of the remnant magnetization of the Fe 3 O 4 nanoparticles. This new colloidal spin-LED architecture presents significant prospects for future solution-processed advanced opto-spintronic devices.

circularly polarized electroluminescence↗
DOE OSTI2022

Ferromagnetic Double Perovskite Semiconductors with Tunable Properties

Abstract The authors successfully dope the magnetically silent double perovskite semiconductor Sr 2 GaSbO 6 to induce ferromagnetism and tune its bandgap, with Ga 3+ partially substituted by the magnetic trivalent cation Mn 3+ , in a rigid cation ordering with Sb 5+ . The new ferromagnetic semiconducting Sr 2 Ga 1− x Mn x SbO 6 double perovskite, which crystallizes in tetragonal symmetry (space group I 4/ m ) and has tunable ferromagnetic ordering temperature and bandgap, suggests that magnetic ion doping of double perovskites is a productive avenue toward obtaining materials for application in next‐generation oxide‐based spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Giant Orbital Anisotropy with Strong Spin–Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice

Orbital anisotropy at interfaces in magnetic heterostructures has been key to pioneering spin–orbit-related phenomena. However, modulating the interface’s electronic structure to make it abnormally asymmetric has been challenging because of lack of appropriate methods. Here, the authors report that low-energy proton irradiation achieves a strong level of inversion asymmetry and unusual strain at interfaces in [Co/Pd] superlattices through nondestructive, selective removal of oxygen from Co3O4/Pd superlattices during irradiation. Structural investigations corroborate that progressive reduction of Co3O4into Co establishes pseudomorphic growth with sharp interfaces and atypically large tensile stress. The normal component of orbital to spin magnetic moment at the interface is the largest among those observed in layered Co systems, which is associated with giant orbital anisotropy theoretically confirmed, and resulting very large interfacial magnetic anisotropy is observed. All results attribute not only to giant orbital anisotropy but to enhanced interfacial spin–orbit coupling owing to the pseudomorphic nature at the interface. They are strongly supported by the observation of reversal of polarity of temperature-dependent Anomalous Hall signal, a signature of Berry phase. This work suggests that establishing both giant orbital anisotropy and strong spin–orbit coupling at the interface is key to exploring spintronic devices with new functionalities.

42 ENGINEERING↗
DOE OSTI2023

Controllable Skyrmionic Phase Transition between Néel Skyrmions and Bloch Skyrmionic Bubbles in van der Waals Ferromagnet Fe 3-δ GeTe 2

The van der Waals (vdW) ferromagnet Fe 3-δ GeTe 2 has garnered significant research interest as a platform for skyrmionic spin configurations, that is, skyrmions and skyrmionic bubbles. However, despite extensive efforts, the origin of the Dzyaloshinskii–Moriya interaction (DMI) in Fe 3-δ GeTe 2 remains elusive, making it challenging to acquire these skyrmionic phases in a controlled manner. In this study, it is demonstrated that the Fe content in Fe 3-δ GeTe 2 has a profound effect on the crystal structure, DMI, and skyrmionic phase. For the first time, a marked increase in Fe atom displacement with decreasing Fe content is observed, transforming the original centrosymmetric crystal structure into a non-centrosymmetric symmetry, leading to a considerable DMI. Additionally, by varying the Fe content and sample thickness, a controllable transition between Néel-type skyrmions and Bloch-type skyrmionic bubbles is achieved, governed by a delicate interplay between dipole–dipole interaction and the DMI. The findings offer novel insights into the variable skyrmionic phases in Fe 3-δ GeTe 2 and provide the impetus for developing vdW ferromagnet-based spintronic devices.

2D ferromagnet Fe3-δGeTe2↗
DOE OSTI2024

Unconventional Anomalous Hall Effect Driven by Self‐Intercalation in Covalent 2D Magnet Cr 2 Te 3

Covalent 2D magnets such as Cr 2 Te 3 , which feature self-intercalated magnetic cations located between monolayers of transition-metal dichalcogenide material, offer a unique platform for controlling magnetic order and spin texture, enabling new potential applications for spintronic devices. Here, it is demonstrated that the unconventional anomalous Hall effect (AHE) in Cr 2 Te 3 , characterized by additional humps and dips near the coercive field in AHE hysteresis, originates from an intrinsic mechanism dictated by the self-intercalation. This mechanism is distinctly different from previously proposed mechanisms such as topological Hall effect, or two-channel AHE arising from spatial inhomogeneities. Crucially, multiple Weyl-like nodes emerge in the electronic band structure due to strong spin-orbit coupling, whose positions relative to the Fermi level is sensitively modulated by the canting angles of the self-intercalated Cr cations. These nodes contribute strongly to the Berry curvature and AHE conductivity. This component competes with the contribution from bands that are less affected by the self-intercalation, resulting in a sign change in AHE with temperature and the emergence of additional humps and dips. The findings provide compelling evidence for the intrinsic origin of the unconventional AHE in Cr 2 Te 3 and further establish self-intercalation as a control knob for engineering AHE in complex magnets.

2D magnets↗
DOE OSTI2025

Reversible Modification of Rashba States in Topological Insulators at Room Temperature by Edge Functionalization

Quantum materials with novel spin textures from strong spin-orbit coupling (SOC) are essential components for a wide array of proposed spintronic devices. Topological insulators have a necessary strong SOC that imposes a unique spin texture on topological states and Rashba states that arise on the boundary, but there is no established methodology to control the spin texture reversibly. Here, it is demonstrated that functionalizing Bi 2 Se 3 films by altering the step-edge termination directly changes the strength of SOC and thereby modifies the Rashba strength of 1D edge states. Scanning tunneling microscopy/spectroscopy shows that these Rashba edge states arise and subsequently vanish through the Se functionalization and reduction process of the step edges. The observations are corroborated by density functional theory calculations, which show that a subtle chemical change of edge termination fundamentally alters the underlying electronic structure. Importantly, fully reversible and repeatable switching of Rashba edge states across multiple cycles at room temperature is experimentally demonstrated. The results imply Se functionalization as a practical method to control SOC and spin texture of quantum states in topological insulators.

Rashba edge states↗
DOE OSTI2021

Low-Frequency Electronic Noise in Quasi-2D van der Waals Antiferromagnetic Semiconductor FePS 3 —Signatures of Phase Transitions

Here, low-frequency current fluctuations, i.e., noise, in the quasi-2D van der Waals antiferromagnetic semiconductor FePS 3 with the electronic bandgap of 1.5 eV is investigated. The electrical and noise characteristics of the p-type, highly resistive, thin films of FePS 3 are measured at different temperatures. The noise spectral density is of the 1/f-type over most of the examined temperature range but reveals well-defined Lorentzian bulges, and increases strongly near the Néel temperature T N =118 K (f is the frequency). Intriguingly, the noise spectral density attains its minimum at temperature T≈200 K, which is attributed to an interplay of two opposite trends in noise scaling—one for semiconductors and another for materials with the phase transitions. The Lorentzian corner frequencies reveal unusual dependence on temperature and bias voltage, suggesting that their origin is different from the generation—recombination noise in conventional semiconductors. The obtained results are important for proposed applications of antiferromagnetic semiconductors in spintronic devices. They also attest to the power of the noise spectroscopy for monitoring various phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Orbital Hybridization and Magnetic Coupling at Cuprate–Manganite Interfaces Driven by Manganite Doping

Fundamental understanding of interface mechanisms that generate unexpected physical properties in the cuprate/manganite heterostructures is essential for possible applications as spintronic devices. In this study, CaCuO 2 /La 1–x Sr x MnO 3 (CCO/LSMO) superlattices are investigated, where the infinite-layer cuprate CCO does not have apical oxygen for Cu in the Ca-plane so that the Mn–O–Cu superexchange coupling can be only present at the MnO 2 –(La,Sr)O–CuO 2 interface. Two different doping states for the manganites are studied, namely x = 0.1 and x = 0.3, corresponding to the ferromagnetic insulating and ferromagnetic metallic states, respectively, in the manganite phase diagram. Linear and circular dichroism in X-ray absorption by synchrotron radiation at Cu and Mn L-edges clearly demonstrate that in the absence of apical oxygen in the cuprate block, the magnetic coupling between the LSMO and CCO is weakly ferromagnetic when LSMO is metallic, while it is antiferromagnetic when LSMO is insulating, along with an increased Cu 3d(3z 2 –r 2 ) and Mn 3d(3z 2 –r 2 ) orbital occupation. It is proposed that the Mn 3d valence band upward shift driven by the enhancement of Mn 3+ content in the underdoped sample enhances the orbital hybridization. The stronger hybridization at the interface MnO 2 –(La,Sr)O–CuO 2 gives rise to the antiferromagnetic coupling between cuprate and underdoped manganite.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Observation of Topological Spin Textures in Ferrimagnetic Mn 2 − x Zn x Sb

Ferrimagnets, which have both ferromagnetic and antiferromagnetic coupling, are attracting increased attention in the realm of spintronic devices due to advantages such as ultrafast dynamics and a suppressed skyrmion Hall effect. Thus, understanding the behavior of nontrivial spin textures in ferrimagnets is crucial; however, comprehensive reports on this topic remain limited. Here, the magnetic spin textures of ferrimagnetic Mn 2 − x Zn x Sb (x = 0.85) is explored as a function of temperature and applied magnetic field. The spin textures can be tuned to a variety of states, including stripes, skyrmion bags, and a skyrmion lattice. Chiral Néel-type magnetic structures are visualized using Lorentz transmission electron microscopy. Mn(I) ions are slightly shifted toward the Sb sites, which may be due to a strong electrostatic interaction between Mn and Sb ions. This local structural distortion breaks the inversion symmetry and introduces an effective Dzyaloshinkii–Moriya interaction. This work thus provides a pathway to use doping and heterogeneity in a ferrimagnet to control and generate chiral nontrivial spin textures.

Mn ion displacement↗
DOE OSTI2025

Unusual Ferromagnetic Band Evolution and High Curie Temperature in Monolayer 1T‐CrTe2 on Bilayer Graphene

2D van der Waals ferromagnets hold immense promise for spintronic applications due to their controllability and versatility. Despite their significance, the realization and in-depth characterization of ferromagnetic materials in atomically thin single layers, close to the true 2D limit, has been scarce. Here, a successful synthesis of monolayer (ML) 1T-CrTe2 is reported on a bilayer graphene (BLG) substrate via molecular beam epitaxy. Using angle-resolved photoemission spectroscopy and magneto-optical Kerr effect measurements, that the ferromagnetic transition is observed at the Curie temperature (TC) of 150 K in ML 1T-CrTe2 on BLG, accompanied by unconventional temperature-dependent band evolutions. The spectroscopic analysis and first-principle calculations reveal that the ferromagnetism may arise from Goodenough-Kanamori super-exchange and double-exchange interactions, enhanced by the lattice distortion and the electron doping from the BLG substrate. These findings provide pivotal insight into the fundamental understanding of mechanisms governing 2D ferromagnetism and offer a pathway for engineering higher TC in 2D materials for future spintronic devices.

Park, Kyoungree↗
DOE OSTI2023

Electrochemical Intercalation and Exfoliation of CrSBr into Ferromagnetic Fibers and Nanoribbons

Abstract Recent studies dedicated to layered van der Waals crystals have attracted significant attention to magnetic atomically thin crystals offering unprecedented opportunities for applications in innovative magnetoelectric, magneto‐optic, and spintronic devices. The active search for original platforms for the low‐dimensional magnetism study has emphasized the entirely new magnetic properties of two dimensional (2D) semiconductor CrSBr. Herein, for the first time, the electrochemical exfoliation of bulk CrSBr in a non‐aqueous environment is demonstrated. Notably, crystal cleavage governed by the structural anisotropy occurred along two directions forming atomically thin and few‐layered nanoribbons. The exfoliated material possesses an orthorhombic crystalline structure and strong optical anisotropy, showing the polarization dependencies of Raman signals. The antiferromagnetism exhibited by multilayered CrSBr gives precedence to ferromagnetic ordering in the revealed CrSBr nanostructures. Furthermore, the potential application of CrSBr nanoribbons is pioneered for electrochemical photodetector fabrication and demonstrates its responsivity up to 30 µA cm −2 in the visible spectrum. Moreover, the CrSBr‐based anode for lithium‐ion batteries exhibited high performance and self‐improving abilities. This anticipates that the results will pave the way toward the future study of CrSBr and practical applications in magneto‐ and optoelectronics.

Chemistry↗
DOE OSTI2021

Hidden symmetries, spin and charge of artificial magnetic monopoles

Here, we discuss the non-Abelian artificial magnetic monopoles associated with n-level energy crossing in quantum systems. We found that hidden symmetries reveal themselves as observables such as spin, hypercharge, and other physical degrees of freedom. We illustrated our results on concrete examples of two and three energy-level crossings. Our findings can be helpful for modeling various phenomena in physical systems such as SU(N) topological insulators and spintronic devices based on topological insulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Unraveling peculiar magnetism and band topology in Mn 3 Sb

Magnetic, pseudogap, topological, magnetostructural, and elastic behaviors of Mn 3 Sb have been unraveled. The ferrimagnetism (FIM) is described by localized and delocalized electron magnetism resulting in different magnetic moments on Mn atoms, confirming the neutron diffraction data. The identified magnetostructural properties are due to the non-equivalent Mn atoms in its lowest symmetry structure. The electronic structure is also unique due to variable valance states of Mn atoms. The magnetic moment (4.10 μB) of non-equivalent Mn1 atom is antiparallely aligned with the magnetic moments (2.34 μB) of Mn 2 and Mn 3 atoms. The estimated Curie temperature, TC, is higher than the room temperature, which may have above the room temperature applications in spintronic devices. The band structure and density of states (DOS) show the characteristics of band topology (opening of a gap in Dirac-like band features) and pseudo-gap, respectively, around the Fermi level. While expanding the unit cell, the tetragonal FIM ground state transforms to the cubic primitive FIM phase, however, the contraction transforms it to the L1 2 ferromagnetic (FM) phase. The estimated elastic constants, bulk to shear modulus ratio, and elastic anisotropy factor indicate that Mn3Sb exhibits mechanically stable, ductile, and anisotropic behaviors, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interplay of pressure and temperature in modulating the magnetic properties of Cr 2 O 3

The spin-lattice interaction is pivotal in tailoring materials properties and is crucial for developing novel spintronic devices. Here, in the current work, we aim to explore the effects of pressure and temperature on the magnetic properties of Cr 2 O 3 to gain insights into its spin-lattice interaction. Through high-pressure neutron diffraction experiments, we observed an enhancement of the magnetic Bragg intensity with increasing pressure and it becomes more pronounced as the temperature increases. Results from first-principles calculations reveal a strengthening of the easy-axis magnetic anisotropy, doubling from 0 to 20 GPa. The exchange parameters, calculated based on this spin orientation, show an enhancement of the dominant magnetic interactions and an increase of magnetic ordering temperature when pressure increases. These findings suggest that the contributions from these two mechanisms are responsible for the observed increase in magnetic Bragg intensity.

Cr2O3↗
DOE OSTI2020

Extend NdJ relationship with the size, multiple exchanges and Dzyaloshinskii-Moriya interaction for Néel skyrmions in hexagonal magnetic interfaces

For the integration with other parts of spintronic devices, it is desired to minimize the size of skyrmions to a nanometer scale. To provide a theoretical guidance for this endeavour, we established an extended NdJ relationship between the skyrmion size and fundamental magnetic properties of two-dimensional hexagonal ferromagnetic lattices, including multiple exchanges between different neighbors (J 1 -J 4 ), Dzyaloshinskii-Moriya interactions (d 1 and d 2 ) and on-site magnetic anisotropy energy. We demonstrated the applicability of this approach through density functional theory and spin spiral calculations for several interface, e.g., Co/Gra, Rh/Gra, Co/Pt 3 and MgO/Co/Pt 3 , and showed that the size of Néel skyrmions can be effectively reduced by either enhancing d or more conveniently reducing J through cancelation of J i s.

36 MATERIALS SCIENCE↗