Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar coronagraph”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

An Infrared Telescope for Planet Detection and General Astrophysics

NASA plans to launch a Terrestrial Planet Finder (TPF) mission in 2014 to detect and characterize Earth-like planets around nearby stars, perform comparative planetology studies, and obtain general astrophysics observations. During our recently completed a TPF Mission Architecture study for NASA/JPL we developed the conceptual design for a 28-meter telescope with an IR Coronagraph that meets these mission objectives. This telescope and the technology it embodies are directly applicable to future Far-IR and Submillimeter space missions. The detection of a 30th magnitude planet located within 50 milli-arc-seconds of a 5th (Visual) magnitude star is an exceptionally challenging objective. Observations in the thermal infrared (7-17 microns) are somewhat easier since the planet is "only" 15(sup m) fainter than the star at these wavelengths, but many severe challenges must still be overcome. These challenges include: 1. Designing a coronagraph for star:planet separations less than or equal to lambda/D. 2. Developing the deployment scheme for a 28m space telescope that can fit in an existing launch vehicle payload fairing. 3. Generating configuration layouts for the IR telescope, coronagraph, spacecraft bus, sunshade, solar array, and high-gain antenna. 4. Providing: Structural stability to within 10 microns to support the optics. Thermal control to achieve the necessary structural stability, as well as providing a stable (approx. 30K) thermal environment for the optics. Dynamics isolation from potential jitter sources. 5. Minimizing launch mass to provide the maximum payload for the science mission Interfacing to an EELV Heavy launch vehicle, including acoustic and stress loads for the launch environment. 6. Identifying the key technologies (which can be developed by 2009) that will enable TPF mission to be performed. 7. Generating a manufacturing plan that will permit TPF to be developed at a reasonable cost and schedule. Many of these design challenges result in inherently conflicting requirements on the design of TPF. Drawing on our experience with large space telescopes such as the Chandra X-ray Observatory and the Next Generation Space Telescope, we have created a conceptual design for TPF that successfully meets these challenging requirements. This paper describes our solution to these challenges.

Lillie, C. F.↗

The Visible Nulling Coronagraph--Architecture Definition and Technology Development

This paper describes the advantages of visible direct detection and spectroscopy of Earth-like extrasolar planets using a nulling coronagraph instrument behind a moderately sized single aperture space telescope. Our concept synthesizes a nulling interferometer by shearing the telescope pupil, with the resultant producing a deep null. We describe nulling configurations that also include methods to mitigate stellar leakage, such as spatial filtering by a coherent array of single mode fibers, and post-starlight suppression wavefront sensing and control. With diffraction limited telescope optics and similar quality components in the optical train (lambda/20), suppression of the starlight to 1e-10 is readily achievable. We describe key features of the architecture and analysis, present latest results of laboratory measurements demonstrating achievable null depth and component development, and discuss future key technical milestones.

nulling interferometer↗

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe coronal mass ejections (CMEs) a in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approximately 1.5Rs (solar radii), which coincides with the distance at which the Alfv?n speed profile has a minimum value. We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfv?n speed peaks (?3Rs ? 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approximately 1.5 Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2 Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Gopalswamy, N.↗

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe CMEs in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approx. 1.5Rs (solar radii), which coincides with the distance at which the Alfven speed profile has a minimum value.We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfven speed peaks (approx. 3Rs - 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approx 1.5Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Solar Energetic Particles↗

A Small Satellite Mission for Solar Coronagraphy

We present on a concept study of the Goddard Miniature Coronagraph (GMC) mission for measuring the plasma flow in the solar corona in the form of solar wind and coronal mass ejections (CMEs). These mass flows can dramatically alter the near-Earth space environment to hazardous conditions posing danger to human technology in space. The primary science objective of the mission is to measure the properties of CMEs, coronal structures, and the solar wind near the Sun. The miniaturization of the coronagraph involves using a single-stage optics and a polarization camera, both of which reduce the size of the coronagraph. GMC will be accommodated in a small satellite that can be built with CubeSat material to minimize cost. The development of the Dellingr mission at NASA/GSFC has provided expertise and a clear pathway to build the GMC mission. The hardware and software used for the Dellingr (a name derived from the god of the dawn in Norse mythology) Mission are technically sound, so the GMC mission can be fully defined. Software, pointing, control and communications systems developed for GSFC CubeSats can be readily adapted to cut costs. We present orbit options such as an ISS (International Space Station) orbit or a Sun-synchronous dawn-dusk polar orbit with the aim of maximizing solar observations.

Gopalswamy, N.↗

OBSERVING FLUX ROPE FORMATION DURING THE IMPULSIVE PHASE OF A SOLAR ERUPTION

Magnetic flux ropes are believed to be an important structural component of coronal mass ejections (CMEs). While there exists much observational evidence of flux ropes after the eruption, e.g., as seen in remote-sensing coronagraph images or in situ solar wind data, the direct observation of flux ropes during CME impulsive phase has been rare. In this Letter, we present an unambiguous observation of a flux rope still in the formation phase in the low corona. The CME of interest occurred above the east limb on 2010 November 3 with footpoints partially blocked. The flux rope was seen as a bright blob of hot plasma in the Atmospheric Imaging Assembly (AIA) 131 A passband (peak temperature {approx}11 MK) rising from the core of the source active region, rapidly moving outward and stretching the surrounding background magnetic field upward. The stretched magnetic field seemed to curve-in behind the core, similar to the classical magnetic reconnection scenario in eruptive flares. On the other hand, the flux rope appeared as a dark cavity in the AIA 211 A passband (2.0 MK) and 171 A passband (0.6 MK); in these relatively cool temperature bands, a bright rim clearly enclosed the dark cavity. The bright rim likely represents the pileup of the surrounding coronal plasma compressed by the expanding flux rope. The composite structure seen in AIA multiple temperature bands is very similar to that in the corresponding coronagraph images, which consists of a bright leading edge and a dark cavity, commonly believed to be a flux rope.

79 ASTRONOMY AND ASTROPHYSICS↗

A GLOBAL TWO-TEMPERATURE CORONA AND INNER HELIOSPHERE MODEL: A COMPREHENSIVE VALIDATION STUDY

The recent solar minimum with very low activity provides us a unique opportunity for validating solar wind models. During CR2077 (2008 November 20 through December 17), the number of sunspots was near the absolute minimum of solar cycle 23. For this solar rotation, we perform a multi-spacecraft validation study for the recently developed three-dimensional, two-temperature, Alfven-wave-driven global solar wind model (a component within the Space Weather Modeling Framework). By using in situ observations from the Solar Terrestrial Relations Observatory (STEREO) A and B, Advanced Composition Explorer (ACE), and Venus Express, we compare the observed proton state (density, temperature, and velocity) and magnetic field of the heliosphere with that predicted by the model. Near the Sun, we validate the numerical model with the electron density obtained from the solar rotational tomography of Solar and Heliospheric Observatory/Large Angle and Spectrometric Coronagraph C2 data in the range of 2.4 to 6 solar radii. Electron temperature and density are determined from differential emission measure tomography (DEMT) of STEREO A and B Extreme Ultraviolet Imager data in the range of 1.035 to 1.225 solar radii. The electron density and temperature derived from the Hinode/Extreme Ultraviolet Imaging Spectrometer data are also used to compare with the DEMT as well as the model output. Moreover, for the first time, we compare ionic charge states of carbon, oxygen, silicon, and iron observed in situ with the ACE/Solar Wind Ion Composition Spectrometer with those predicted by our model. The validation results suggest that most of the model outputs for CR2077 can fit the observations very well. Based on this encouraging result, we therefore expect great improvement for the future modeling of coronal mass ejections (CMEs) and CME-driven shocks.

79 ASTRONOMY AND ASTROPHYSICS↗

Preliminary results from the MAMA detectors for the SOHO mission

Multi-Anode Microchannel Array (MAMA) detector systems are being fabricated and tested for use in the Solar Ultraviolet Measurements of Emitted Radiation (SUMER) and the Ultraviolet Coronagraph Spectrometer (UVCS) instruments on the ESA/NASA Solar and Heliospheric Observatory (SOHO) mission. The SOHO MAMA detector systems have formats of 360 x 1024 pixels and pixel dimensions of 25 x 25 sq microns and are optimized for operation at Extreme Ultraviolet (EUV) wavelengths between 40 and 160 nm. In this paper we report on the initial results of measurements of the performance characteristics of the first flight-configuration detector system employing the new custom Application Specific Integrated Circuits (ASICs) which are designed to improve both the dynamic range and the uniformity of response. The performance characteristics of this detector system are compared with those of earlier breadboard systems employing discrete-component electronics circuits.

Slater, David C.↗

PLASMA HEATING DURING A CORONAL MASS EJECTION OBSERVED BY THE SOLAR AND HELIOSPHERIC OBSERVATORY

We perform a time-dependent ionization analysis to constrain plasma heating requirements during a fast partial halo coronal mass ejection (CME) observed on 2000 June 28 by the Ultraviolet Coronagraph Spectrometer (UVCS) aboard the Solar and Heliospheric Observatory (SOHO). We use two methods to derive densities from the UVCS measurements, including a density sensitive O V line ratio at 1213.85 and 1218.35 A, and radiative pumping of the O VI {lambda}{lambda}1032, 1038 doublet by chromospheric emission lines. The most strongly constrained feature shows cumulative plasma heating comparable to or greater than the kinetic energy, while features observed earlier during the event show plasma heating of order or less than the kinetic energy. SOHO Michelson Doppler Imager observations are used to estimate the active region magnetic energy. We consider candidate plasma heating mechanisms and provide constraints when possible. Because this CME was associated with a relatively weak flare, the contribution from flare energy (e.g., through thermal conduction or energetic particles) is probably small; however, the flare may have been partially behind the limb. Wave heating by photospheric motions requires heating rates to be significantly larger than those previously inferred for coronal holes, but the eruption itself could drive waves that heat the plasma. Heating by small-scale reconnection in the flux rope or by the CME current sheet is not significantly constrained. UVCS line widths suggest that turbulence must be replenished continually and dissipated on timescales shorter than the propagation time in order to be an intermediate step in CME heating.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation of Spherically Symmetric Inversion by Use of a Tomographically Reconstructed Three-Dimensional Electron Density of the Solar Corona

Determining the coronal electron density by the inversion of white-light polarized brightness (pB) measurements by coronagraphs is a classic problem in solar physics. An inversion technique based on the spherically symmetric geometry (spherically symmetric inversion, SSI) was developed in the 1950s and has been widely applied to interpret various observations. However, to date there is no study of the uncertainty estimation of this method. We here present the detailed assessment of this method using a three-dimensional (3D) electron density in the corona from 1.5 to 4 solar radius as a model, which is reconstructed by a tomography method from STEREO/COR1 observations during the solar minimum in February 2008 (Carrington Rotation, CR 2066).We first show in theory and observation that the spherically symmetric polynomial approximation (SSPA) method and the Van de Hulst inversion technique are equivalent. Then we assess the SSPA method using synthesized pB images from the 3D density model, and find that the SSPA density values are close to the model inputs for the streamer core near the plane of the sky (POS) with differences generally smaller than about a factor of two; the former has the lower peak but extends more in both longitudinal and latitudinal directions than the latter. We estimate that the SSPA method may resolve the coronal density structure near the POS with angular resolution in longitude of about 50 deg. Our results confirm the suggestion that the SSI method is applicable to the solar minimum streamer (belt), as stated in some previous studies. In addition, we demonstrate that the SSPA method can be used to reconstruct the 3D coronal density, roughly in agreement with the reconstruction by tomography for a period of low solar activity (CR 2066). We suggest that the SSI method is complementary to the 3D tomographic technique in some cases, given that the development of the latter is still an ongoing research effort.

corona↗

Coronal mass ejections and the injection profiles of solar energetic particle events

Previous studies using Skylab and Solwind coronagraph observations have shown that almost all E greater than 10 MeV solar energetic proton (SEP) events are associated with the occurrence of a coronal mass ejection (CME). These earlier studies did not address the relationship between the position of the associated CME and the timing of the injection of particles into the interplanetary medium. Ten cases are selected in which a SEP event observed with the GSFC detectors on the IMP 8 or ISEE 3 spacecraft was correlated to a CME well observed by the Solwind coronagraph. The height of the leading edge of the CME is compared with the particle injection profiles for several energy ranges using the solar release times for the particles. The derived injection profiles are found to be increasing and sometimes reaching maximum while the associated CMEs are at heights of 2-10 Ro.

Kahler, S. W.↗

Height of Shock Formation in the Solar Corona Inferred from Observations of Type II Radio Bursts and Coronal Mass Ejections

Employing coronagraphic and EUV observations close to the solar surface made by the Solar Terrestrial Relations Observatory (STEREO) mission, we determined the heliocentric distance of coronal mass ejections (CMEs) at the starting time of associated metric type II bursts. We used the wave diameter and leading edge methods and measured the CME heights for a set of 32 metric type II bursts from solar cycle 24. We minimized the projection effects by making the measurements from a view that is roughly orthogonal to the direction of the ejection. We also chose image frames close to the onset times of the type II bursts, so no extrapolation was necessary. We found that the CMEs were located in the heliocentric distance range from 1.20 to 1.93 solar radii (Rs), with mean and median values of 1.43 and 1.38 Rs, respectively. We conclusively find that the shock formation can occur at heights substantially below 1.5 Rs. In a few cases, the CME height at type II onset was close to 2 Rs. In these cases, the starting frequency of the type II bursts was very low, in the range 25-40 MHz, which confirms that the shock can also form at larger heights. The starting frequencies of metric type II bursts have a weak correlation with the measured CME/shock heights and are consistent with the rapid decline of density with height in the inner corona.

EUV↗

STRUCTURE AND DYNAMICS OF THE 2012 NOVEMBER 13/14 ECLIPSE WHITE-LIGHT CORONA

Continuing our series of observations of coronal motion and dynamics over the solar-activity cycle, we observed from sites in Queensland, Australia, during the 2012 November 13 (UT)/14 (local time) total solar eclipse. The corona took the low-ellipticity shape typical of solar maximum (flattening index ε = 0.01), a change from the composite coronal images we observed and analyzed in this journal and elsewhere for the 2006 and 2008-2010 eclipses. After crossing the northeast Australian coast, the path of totality was over the ocean, so further totality was seen only by shipborne observers. Our results include velocities of a coronal mass ejection (CME; during the 36 minutes of passage from the Queensland coast to a ship north of New Zealand, we measured 413 km s{sup –1}) and we analyze its dynamics. We discuss the shapes and positions of several types of coronal features seen on our higher-resolution composite Queensland coronal images, including many helmet streamers, very faint bright and dark loops at the bases of helmet streamers, voids, and radially oriented thin streamers. We compare our eclipse observations with models of the magnetic field, confirming the validity of the predictions, and relate the eclipse phenomenology seen with the near-simultaneous images from NASA's Solar Dynamics Observatory (SDO/AIA), NASA's Extreme Ultraviolet Imager on Solar Terrestrial Relations Observatory, ESA/Royal Observatory of Belgium's Sun Watcher with Active Pixels and Image Processing (SWAP) on PROBA2, and Naval Research Laboratory's Large Angle and Spectrometric Coronagraph Experiment on ESA's Solar and Heliospheric Observatory. For example, the southeastern CME is related to the solar flare whose origin we trace with a SWAP series of images.

79 ASTRONOMY AND ASTROPHYSICS↗

The outer solar corona as observed from Skylab - Preliminary results

The white-light coronagraph experiment has made frequent, periodic observations of the solar corona from 1.5 to 6.0 solar radii during the Skylab mission, and these observations will permit the determination of the three-dimensional extent of coronal forms. There are several time scales on which visual changes in coronal structures occur, ranging from approximately one-half rotation to less than hours. A number of events corresponding to the shortest time scale - coronal transients - cause major restructuring of the corona.

Macqueen, R. M.↗

The solar corona as seen from Skylab

The white light coronagraph (WLC) experiment of the Skylab/ATM obtained an unprecedented series of observations of the solar corona from 1.5 to 6 solar radii for approximately eight and one-half months. Coronal evolution and disruptions seen by the WLC occur on many different time scales. Some illustrative examples will be shown. The characteristics of mass ejection coronal transients - as we presently know them - will be given. These include: the greater than expected frequency of occurrence; the correlation with solar activity; the quantity of mass and energy contained in a transient; etc.

Hildner, E.↗

Concerning solar sources for Cycle 22 solar wind activity in the heliosphere

Beginning in 1989, the active phase of the present solar cycle became manifest in the outer heliosphere as large disturbances in solar wind velocity as observed by the Ames plasma analyzers aboard Pioneer 10 (46-50 AU heliocentric distance) and Pioneer 11 (about 28 AU). Inner heliospheric baseline plasma observations from the Pioneer Venus Orbiter (0.7 AU) and IMP 8 (1 AU) are useful for attempts to correlate solar events with the outer heliospheric disturbances. With regard to the onset of activity at Pioneer 11, Pioneer Venus observations are pertinent, and some of these in turn correspond with CMEs (coronal mass ejections) observed in SMM coronagraph data. In particular, enhanced solar wind speeds observed at Pioneer Venus during December 1988 to February 1989 are associated with seven large solar wind shocks (or shock candidates); corresponding CMEs may be identified. Two of these seven shocks were identified as candidates for a precursor to the onset of the disturbances at Pioneer 11. At Pioneer 10 the disturbed period includes two large disturbances, associated with the passage of shocks. There are several candidate CMEs in the SMM observations, one of which may be associated with the second Pioneer 10 shock.

Mihalov, J. D.↗

On the Coronal Mass Ejection Detection Rate during Solar Cycles 23 and 24

The Solar and Heliospheric Observatory (SOHO) mission's white light coronagraphs have observed more than25,000 coronal mass ejections (CMEs) from 1996 January to the end of 2015 July. This period of time covers almost two solar cycles (23 and 24). The basic attributes of CMEs, reported in the SOHO/Large Angle and Spectrometric Coronagraph (LASCO) catalog, during these solar cycles were statistically analyzed. The question of the CME detection rate and its connection to the solar cycles was considered in detail. Based on the properties and detection rate, CMEs can be divided into two categories: regular and specific events. The regular events are pronounced and follow the pattern of sunspot number. On the other hand, the special events are poorer and more correlated with the general conditions of heliosphere and corona. Nevertheless, both groups of CMEs are the result of the same physical phenomenon, viz. release of magnetic energy from closed field regions. It was demonstrated that the enhanced CME rate, since the solar cycle 23 polar-field reversal, is due to a significant decrease of total(magnetic and plasma) heliospheric pressure as well as the changed magnetic pattern of solar corona. CMEs expel free magnetic energy and helicity from the Sun; therefore, they are related to complex solar magnetic field structure. It is also worth emphasizing that the CMEs listed in the SOHO/LASCO catalog are real ejections (not false identification). Their detection rate reflects the global evolution of the magnetic field on the Sun, and not only changes in the magnetic structures associated with sunspots.

Michalek, Grzegorz↗

SOHO observations of the north polar solar wind

The observations performed with the ultraviolet coronagraph spectrometer (UVCS) are reported on. These observations concerned the Lyman alpha and O VI 1032 A and 1037 A lines and covered the heliocentric distance from 1.5 to 3.5 solar radii. The corresponding inner corona was observed with the coronal diagnostic spectrometer (CDS) and the solar ultraviolet measurement of emitted radiation (SUMER) in several chromospheric and coronal lines, including those observed with UVCS. The images provided an overall scenario of the polar coronal hole.

Peres, G.↗