Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Measurement of Short-Range Correlations in Shock-Compressed Plastic by Short-Pulse X-Ray Scattering

We have performed short-pulse x-ray scattering measurements on laser-driven shock-compressed plastic samples in the warm dense matter regime, providing instantaneous snapshots of the system evolution. Time-resolved and angularly resolved scattered spectra sensitive to the correlation effects in the plasma show the appearance of short-range order within a few interionic separations. Comparison with radiation-hydrodynamic simulations indicates that the shocked plastic is compressed with a temperature of a few electron volts. These results are important for the understanding of the thermodynamic behavior of strongly correlated matter for conditions relevant to both laboratory astrophysics and inertial confinement fusion research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray Thomson scattering measurements from shock-compressed deuterium

X-ray Thomson scattering has recently been shown to be an effective method of diagnosing a variety of high energy density plasma conditions. We apply this powerful technique to the widely studied problem of shock-compressed liquid deuterium. The behavior of deuterium under extreme conditions has received considerable attention due to its central role in models of giant planets and the importance of the high-pressure insulator-metal transition. We have used spectrally resolved x-ray scattering from electron-plasma waves to perform microscopic observations of ionization during compression. In these experiments, a single shock was launched in cryogenic deuterium reaching compressions of 3x. The 2 keV Ly-{alpha} line in silicon was used as an x-ray source in a forward scattering geometry. In addition to elastic scattering from tightly bound electrons, this low probe energy accessed the collective plasmon oscillations of delocalized electrons. Inelastic scattering from the plasmons allowed accurate measurements of the free electron density through the spectral position of the resonance and provided an estimate of the temperature through its ratio with the elastic feature. Combined with velocity interferometry from the reflective shock front, this lead to a direct determination of the ionization state. We compare the measured ionization conditions with computational models. Additionally, we discuss the possibility of using this technique to determine electrical conductivity and to directly observe pressure-induced molecular dissociation along the Hugoniot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock compression of additively manufactured high solids loaded polymer composites with aligned porosity

The effects of aligned porosity on the shock-compression response of additively manufactured (AM) composite structures with collinear and log-cabin geometries are investigated. The composites contain two inorganic and two organic particle populations and a UV-curable polymer binder. X-ray phase contrast imaging (X-PCI) is used as an in-material diagnostic in plate-impact experiments performed at the Dynamic Compression Sector of the Advanced Photon Source at the Argonne National Laboratory. Macroscale shock and particle velocities and microscale pore collapse velocities are measured from X-PCI images obtained from samples impacted in various orientations relative to the AM build directions. The linear shock and particle velocity relation for the structures with collinear build geometry shows directional differences, with the build direction exhibiting the highest slope and the filament print direction having the shallowest slope. Composites with log-cabin geometry, due to their slightly lower porosity and smaller sized pores, show higher shock velocities than the collinear structures at the same particle velocity. Microscale directionality effects are also observed, with the pore collapse velocity dependent on the pore configuration. Specifically, the pore collapse velocity is highest for pores elongated along the impact direction which is the case for the colinear structures impacted in the filament print direction, which is consistent with the directionality trend observed in the data for the shock and particle velocity equation of state. The pore collapse velocity approaches ∼80 % of the shock velocity and is several times the average bulk particle velocity, suggesting a highly hydrodynamic mechanism of pore collapse. Overall, both the macroscale response as measured by the shock and particle velocity relationship, and the microscale response as measured by the pore collapse velocity, are found to be anisotropic and dependent on the AM composite structure.

Wagner, K. B. [Georgia Institute of Technology, At↗

Recovery of metastable dense Bi synthesized by shock compression

X-ray free electron laser (XFEL) sources have revolutionized our capability to study ultrafast material behavior. Using an XFEL, we revisit the structural dynamics of shock compressed bismuth, resolving the transition sequence on shock release in unprecedented details. Unlike previous studies that found the phase-transition sequence on shock release to largely adhere to the equilibrium phase diagram (i.e., Bi-V → Bi-III → Bi-II → Bi-I), our results clearly reveal previously unseen, non-equilibrium behavior at these conditions. On pressure release from the Bi-V phase at 5 GPa, the Bi-III phase is not formed but rather a new metastable form of Bi. This new phase transforms into the Bi-II phase which in turn transforms into a phase of Bi which is not observed on compression. We determine this phase to be isostructural with β-Sn and recover it to ambient pressure where it exists for 20 ns before transforming back to the Bi-I phase. The structural relationship between the tetragonal β-Sn phase and the Bi-II phase (from which it forms) is discussed. Lastly, our results show the effect that rapid compression rates can have on the phase selection in a transforming material and show great promise for recovering high-pressure polymorphs with novel material properties in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-time characterization of dislocation slip and twinning of shock-compressed molybdenum single crystals

Characterizing the fundamental micromechanisms activated during plastic deformation is critical to explain the macroscopic shock response of materials and develop accurate material models. In this paper, we investigate the orientation dependence, and the mediated slip and twin systems on [100] and [111] bcc molybdenum single crystals shock compressed up to 18 GPa with real-time Laue x-ray diffraction measurements. We report that dislocation slip along the {110} < 111 > and {112} < 111 > systems is the governing deformation mechanism during compression with negligible anisotropy observed at the Hugoniot state. Here, we provide real-time evidence that molybdenum undergoes deformation twinning along {11¯2} < 111 > during shock release.

36 MATERIALS SCIENCE↗

High-Fidelity Analysis of ULF Wave Mode Structure Following Interplanetary Shock Compression of the Dayside Magnetopause Using MMS Multi-Point Observations

During the 9 March 2018 event with two consecutive interplanetary shocks compressing the dayside magnetosphere, the azimuthal mode structure and frequency spectrum of ultra low frequency magnetic pulsations are resolved using a cross-spectral analysis based on high-fidelity multi-probe Magnetospheric Multiscale Mission (MMS) magnetometer data. The results based on the MMS 4 and MMS 3 pair of measurements show that shock arrival leads to low mode (|m| ≤ 3) magnetic fluctuations in the Pc4-5 regimes, and smaller spatial scale fluctuations implied by the dominant high mode numbers are observed after both shock signatures hit and passed the magnetosphere. Detailed evolution of the mode structure is also shown for the first shock to reveal the development of high mode structure from a bump-on-tail distribution at m≈20 to a dominant peak at m≈50 in about 10 min. In addition, an interesting change of sign in m from negative to positive is observed as MMS crosses ~11 MLT pre-noon, which is consistent with the picture of wave generation by dayside magnetopause compression and then anti-sunward propagation. Finally, for both shocks, the contribution of higher frequency waves (Pc-4 range compared with Pc-5) to the total wave power is found to be negligible before and after the shock impact, but it becomes more significant during the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗

IN-SITU PROBING OF LATTICE RESPONSE IN SHOCK COMPRESSED MATERIALS USING X-RAY DIFFRACTION

Lattice level measurements of material response under extreme conditions are required to build a phenomenological understanding of the shock response of solids. We have successfully used laser produced plasma x-ray sources coincident with laser driven shock waves to make in-situ measurements of the lattice response during shock compression for both single crystal and polycrystalline materials. Using a detailed analysis of shocked single crystal iron which has undergone the {alpha}-{epsilon} phase transition we can constrain the transition mechanism to be consistent with a compression and shuffle of alternate lattice planes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphite to diamond transformation under shock compression: Role of orientational order

To gain insight into the role of orientational order on the shock-induced graphite to diamond phase transformation, three pyrolytic graphite types having different orientational orders were shock-compressed along the average c -axis to peak stresses between 35 and 69 GPa. The materials studied were ZYB-grade highly oriented pyrolytic graphite (HOPG), ZYH-grade HOPG, and as-deposited pyrolytic graphite (PG) having mosaic spreads of 0.8° ± 0.2°, 3.5° ± 1.5°, and ~45°, respectively. Wave profiles, obtained using laser interferometry, show a multiple-wave structure with a distinct, rapid (<10 ns) rise to the high-pressure phase for each graphite type. Multiple-wave profiles, first observed in this study for the less ordered ZYH-grade HOPG and PG samples, show that somewhat poorly oriented pyrolytic graphites also undergo a well-defined phase transformation. Previously, rapid transformation was reported for ZYB-grade but not ZYH-grade HOPG. The measured wave profiles for both HOPG grades are very similar and both grades show a ~22 GPa transformation stress. In contrast, the PG wave profiles are quite different and show a ~46 GPa transformation stress. The continuum results (stress-density states) presented here cannot distinguish between the different high-pressure phases [hexagonal diamond (HD) or cubic diamond] reported in recent x-ray studies. Because ZYB-grade HOPG was recently shown to transform to HD and due to the similar peak states for both HOPG grades, it seems likely that ZYH-grade also transforms into HD. In conclusion, the very different shock responses of PG and HOPG suggest different transformation mechanisms for PG and HOPG, but the high-pressure PG phase remains unclear in the present work.

58 GEOSCIENCES↗

Shock compression behavior of bi-material powder composites with disparate melting temperatures

Laser driven experiments were used to investigate the shock compression behavior of powder processed Bismuth/Tungsten (Bi/W) composite samples. The constituents provide different functionality to the composite behavior as Bi could be shock melted at the pressures attained in this work, while the W could not. Samples were prepared by uniaxial pressing, and the relative density was measured as a function of particle size, applied pressure, and composition for both hot and cold pressing conditions. This resulted in sample densities between 73% and 99% of the theoretical maximum density, and also noticeable differences in microstructure in the hot and cold pressed samples. The compression waves were generated with a 1.3 × 1.3 mm square spot directly onto the surface of the sample, using irradiances between 10{sup 12} and 10{sup 13} W/cm{sup 2}, which resulted in calculated peak pressures between 50 and 150 GPa within a few micrometers. Sample recovery and post-mortem analysis revealed the formation of a crater on the laser drive surface, and the depth of this crater corresponded to the depth to which the Bi had been melted. The melt depth was found to be primarily a function of residual porosity and composition, and ranged from 167 to 528 μm. In general, a higher porosity led to a larger melt depth. Direct numerical simulations were performed, and indicated that the observed increase in melt depth for low-porosity samples could be largely attributed to increased heating associated with work done for pore collapse. However, the relative scaling was sensitive to composition, with low volume fraction Bi samples exhibiting a much stronger dependence on porosity than high Bi content samples. Select samples were repeated using an Al foil ablator, but there were no noticeable differences ensuring that the observed melting was indeed pressure-driven and was not a result of direct laser heating. The resultant microstructures and damage near the spall surface were also investigated qualitatively.

36 MATERIALS SCIENCE↗

B1-B2 transition in shock-compressed MgO

Magnesium oxide (MgO) is a major component of the Earth’s mantle and is expected to play a similar role in the mantles of large rocky exoplanets. At extreme pressures, MgO transitions from the NaCl B1 crystal structure to a CsCl B2 structure, which may have implications for exoplanetary deep mantle dynamics. In this study, we constrain the phase diagram of MgO with laser-compression along the shock Hugoniot, with simultaneous measurements of crystal structure, density, pressure, and temperature. We identify the B1 to B2 phase transition between 397 and 425 gigapascal (around 9700 kelvin), in agreement with recent theory that accounts for phonon anharmonicity. From 425 to 493 gigapascal, we observe a mixed-phase region of B1 and B2 coexistence. The transformation follows the Watanabe-Tokonami-Morimoto mechanism. Our data are consistent with B2-liquid coexistence above 500 gigapascal and complete melting at 634 gigapascal. This study bridges the gap between previous theoretical and experimental studies, providing insights into the timescale of this phase transition.

58 GEOSCIENCES↗

Ultrafast X-Ray Diffraction Studies of the Phase Transitions and Equation of State of Scandium Shock Compressed to 82 GPa

Using x-ray diffraction at the Linac Coherent Light Source x-ray free-electron laser, we have determined simultaneously and self-consistently the phase transitions and equation of state (EOS) of the lightest transition metal, scandium, under shock compression. On compression scandium undergoes a structural phase transition between 32 and 35 GPa to the same bcc structure seen at high temperatures at ambient pressures, and then a further transition at 46 GPa to the incommensurate host-guest polymorph found above 21 GPa in static compression at room temperature. Furthermore, shock melting of the host-guest phase is observed between 53 and 72 GPa with the disappearance of Bragg scattering and the growth of a broad asymmetric diffraction peak from the high-density liquid.

36 MATERIALS SCIENCE↗

High-pressure melt dynamics in shock-compressed titanium

In this work we study the high-pressure melting behavior of titanium using laser-driven shock compression with in situ femtosecond x-ray diffraction and molecular-dynamics simulations based on a machine-learned interatomic potential. The MD simulations predict the solid-liquid coexistence on the Hugoniot in the ∼111−124GPa range. Experimentally, we observe the first evidence of liquid at 86 GPa. We also observe pronounced microstructural changes with pressure, with strong grain refinement associated with the emergence of liquid, within the solid-liquid coexistence (∼110−126GPa). Above 126 GPa, we observe the persistence of residual levels of highly textured crystalline Ti to ∼180GPa, well above the expected melt completion pressure. We discuss the accuracy that current laser-shock experimental platforms have at determining the melt onset and completion pressures.

36 MATERIALS SCIENCE↗

Ultrafast transformation of graphite to diamond: An ab initio molecular dynamics study of graphite under shock compression

This work was performed while I was LLNL. We present an extremely large scale ab initio calculation of the transformation of graphite to diamond under shock compression utilizing Car-Parrinello Molecular Dynamics (CPMD) in conjunction with the Multi-scale Shock Method (MSSM). Our results indicate that the transition from graphite to diamond is Martensitic, in agreement with experimental observations. We find that a shock of 12 km/s forms a short-lived layered diamond phase that eventually relaxes to a cubic diamond state. Moreover, access to the electronic structure allows the computation of the x-ray absorption spectra (XAS) to characterize the final states. The XAS spectra and wide angle x-ray scattering spectra (WAXS) confirm the presence of a cubic diamond final state.

36 MATERIALS SCIENCE↗

Isostructural Phase Transition of Fe 2 ⁢O 3 under Laser Shock Compression

We present in situ x-ray diffraction and velocity measurements of Fe 2⁢ O 3 under laser shock compression at pressures between 38–122 GPa. None of the high-pressure phases reported by static compression studies were observed. Instead, we observed an isostructural phase transition from 𝛼−Fe 2⁢ O 3 to a new 𝛼′−Fe 2 ⁢O 3 phase at a pressure of 50–62 GPa. The 𝛼′−Fe 2⁢ O 3 phase differs from 𝛼−Fe 2 ⁢O 3 by an 11% volume drop and a different unit cell compressibility. We further observed a two-wave structure in the velocity profile, which can be related to an intermediate regime where both 𝛼 and 𝛼′ phases coexist. Furthermore, density functional theory calculations with a Hubbard parameter indicate that the observed unit cell volume drop can be associated with a spin transition following a magnetic collapse.

36 MATERIALS SCIENCE↗

Ultrafast structural response of shock‐compressed plagioclase

Abstract Meteor impacts can induce unique pressure‐dependent structural changes in minerals due to the propagation of shock waves. Plagioclase—ubiquitous throughout the Earth’s crust, extraterrestrial bodies, and meteorites—is commonly used for reconstructing the impact history and conditions of the parent bodies. However, there have been unresolved inconsistencies in the interpretation of shock transformations across previous studies: The pressure at which amorphization begins and the process by which it occurs is the subject of ongoing debate. Here, we utilize time‐resolved in situ X‐ray diffraction (XRD) to probe the phase transformation pathway of plagioclase during shock compression at a sub‐nanosecond timescale. Direct amorphization begins at pressures much lower than what was previously assumed, just above the Hugoniot elastic limit of 5 GPa, with full amorphization to a high‐density amorphous phase, observed at 32(10) GPa and 20 ns. Upon release, the material partially recrystallizes back into the original structure, demonstrating a memory effect.

58 GEOSCIENCES↗

Shock compression response of additively manufactured AlSi10Mg

We measured the Hugoniot, Hugoniot elastic limit (HEL), and spallation strength of laser powder bed fusion (LPBF) AlSi10Mg via uniaxial plate-impact experiments to stresses greater than 13 GPa. Despite its complex anisotropic microstructure, the LPBF AlSi10Mg did not exhibit significant orientation dependence or sample-to-sample variability in these measured quantities. We found that the Hugoniot response of the LPBF AlSi10Mg is similar to that of other Al-based alloys and is well approximated by a linear relationship: u s = 5.49 + 1.39u p . Additionally, the measured HELs ranged from 0.25 to 0.30 GPa and spallation strengths ranged from 1.16 to 1.45 GPa, consistent with values reported in other studies of LPBF AlSi10Mg and Al-based alloys. Furthermore, strain-rate and stress dependence of the spallation strength were also observed.

36 MATERIALS SCIENCE↗

Evidence of Short-Range Screening in Shock-Compressed Aluminum Plasma

We have investigated the angular variation in elastic x-ray scattering from a dense, laser-shock-compressed aluminum foil. A comparison of the experiment with simulations using an embedded atom potential in a molecular dynamics simulation shows a significantly better agreement than simulations based on an unscreened one-component plasma model. These data illustrate, experimentally, the importance of screening for the dense plasma static structure factor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗