Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACE LOGISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

STS-111 Mission Highlights Resource Tape: Flight Days 8 - 10 - Part 3 of 4

An overview of the STS-111 Endeavour mission is given through footage of each flight day. Scenes from flight days 8 through 10 show activities such as extravehicular activity (EVA) preparation, EVA activity to replace the wrist roll joint on the International Space Station's (ISS) robotic arm, logistics transfer operation, space suit check-out and loading of the Leonardo Multi-Purpose Logistics Module onto the Endeavour's cargo bay. Individual shots of Africa, Italy, Hispaniola, Mexico and the Strait of Gilbraltar are shown. For mission footage from flight days 1 to 7 and 11-14, see also, 'STS-111 Mission Highlights Resource Tape, Part 1', 'STS-111 Mission Highlights Resource Tape, Part 2' and 'STS-111 Mission Highlights Resource Tape, Part 4'.

Source record↗

Gateway Program Progress and Overview

This paper provides an overview and status of the Gateway, which will be a small, human-tended space station in orbit around the Moon. The National Aeronautics and Space Administration (NASA) leads the Program and serves as the integrator of the spaceflight capabilities and contributions of U.S. commercial partners and international partners to develop the Gateway. Gateway is the cornerstone of sustainable deep space human exploration and is an essential element of the infrastructure necessary for the execution of the Artemis missions to the Moon. This paper will outline the current planned configuration and deployment of the station, describing the concept of operations and how Gateway supports both lunar surface missions and also serves as the springboard for exploration deeper in space. Calendar year 2022 will see the accomplishments of major milestones such as over twenty systems preliminary design reviews (PDRs), a Program-wide PDR-informed synchronization review, and NASA Key Decision Point marking the evolution of the program as a whole from the formulation phase and into implementation. This paper will provide a progress update for each major component of the Gateway: The Power and Propulsion Element; the Habitation and Logistics Outpost (HALO); Deep Space Logistics; the International Habitation module; the European System Providing Refueling, Infrastructure, and Telecommunications (ESPRIT), which includes a Refueler Module and the HALO Lunar Communications System; External Robotics System; and an Airlock with both science and crew capabilities. For each component, the paper will describe the current maturity of the modules, acquisition strategy, contracts, and if applicable, international partnership status. This paper will also outline the integration function the Gateway Program Office performs at the NASA Johnson Space Center, including the multilateral governance structure and cross-program interfaces across Artemis.

Gateway↗

Space Station core resupply and return requirements estimation

A modular methodology has been developed to model both NASA Space Station onboard resupply/return requirements and Space Shuttle delivery/return capabilities. This approach divides nonpayload Space Station logistics into seven independent categories, each of which is a function of several rates multiplied by user-definable onboard usage scenarios and Shuttle resupply profiles. The categories are summed to arrive at an overall resupply or return requirement. Unused Shuttle resupply and return capacities are also evaluated. The method allows an engineer to evaluate the transportation requirements for a candidate Space Station operational scenario.

Wissinger, D. B.↗

NASA's In Space Manufacturing Initiatives: Conquering the Challenges of In-Space Manufacturing

Current maintenance logistics strategy will not be effective for deep space exploration missions. ISM (In Space Manufacturing) offers the potential to: Significantly reduce maintenance logistics mass requirements; Enable the use of recycled materials and in-situ resources for more dramatic reductions in mass requirements; Enable flexibility, giving systems a broad capability to adapt to unanticipated circumstances; Mitigate risks that are not covered by current approaches to maintainability. Multiple projects are underway currently to develop and validate these capabilities for infusion into ISM exploration systems. ISS is a critical testbed for demonstrating ISM technologies, proving out these capabilities, and performing operational validation of deep space ISM applications. Developing and testing FabLab is a major milestone for springboard to DSG/Cis-lunar Space applications. ISM is a necessary paradigm shift in space operations – design for repair culture must be embraced. ISM team needs to be working with exploration system designers now to identify high-value application areas and influence design.

Clinton, R. G., Jr.↗

Integrated Logistics Support Analysis of the International Space Station Alpha, Background and Summary of Mathematical Modeling and Failure Density Distributions Pertaining to Maintenance Time Dependent Parameters

The process of predicting the values of maintenance time dependent variable parameters such as mean time between failures (MTBF) over time must be one that will not in turn introduce uncontrolled deviation in the results of the ILS analysis such as life cycle costs, spares calculation, etc. A minor deviation in the values of the maintenance time dependent variable parameters such as MTBF over time will have a significant impact on the logistics resources demands, International Space Station availability and maintenance support costs. There are two types of parameters in the logistics and maintenance world: a. Fixed; b. Variable Fixed parameters, such as cost per man hour, are relatively easy to predict and forecast. These parameters normally follow a linear path and they do not change randomly. However, the variable parameters subject to the study in this report such as MTBF do not follow a linear path and they normally fall within the distribution curves which are discussed in this publication. The very challenging task then becomes the utilization of statistical techniques to accurately forecast the future non-linear time dependent variable arisings and events with a high confidence level. This, in turn, shall translate in tremendous cost savings and improved availability all around.

Sepehry-Fard, F.↗

Ionizing Radiation Affects Gene Expression in Mouse Skin and Bone

Future long-duration space exploration beyond low earth orbit will increase human exposure to space radiation and microgravity conditions as well as associated risks to skeletal health. In animal studies, radiation exposure (greater than 1 Gy) is associated with pathological changes in bone structure, enhanced bone resorption, reduced bone formation and decreased bone mineral density, which can lead to skeletal fragility. Definitive measurements and detection of bone loss typically require large and specialized equipment which can make their application to long duration space missions logistically challenging. Towards the goal of developing non-invasive and less complicated monitoring methods to predict astronauts' health during spaceflight, we examined whether radiation induced gene expression changes in skin may be predictive of the responses of skeletal tissue to radiation exposure. We examined oxidative stress and growth arrest pathways in mouse skin and long bones by measuring gene expression levels via quantitative polymerase chain reaction (qPCR) after exposure to total body irradiation (IR). To investigate the effects of irradiation on gene expression, we used skin and femora (cortical shaft) from the following treatment groups: control (normally loaded, sham-irradiated), and IR (0.5 Gy 56Fe 600 MeV/n and 0.5 Gy 1H 150 MeV/n), euthanized at one and 11 days post-irradiation (IR). To determine the extent of bone loss, tibiae were harvested and cancellous microarchitecture in the proximal tibia quantified ex vivo using microcomputed tomography (microCT). Statistical analysis was performed using Student's t-test. At one day post-IR, expression of FGF18 in skin was significantly greater (3.8X) than sham-irradiated controls, but did not differ at 11 days post IR. Expression levels of other genes associated with antioxidant response (Nfe2l2, FoxO3 and Sod1) and the cell cycle (Trp53, Cdkn1a, Gadd45g) did not significantly differ between the control and IR groups at either time point. Radiation exposure resulted in a 27.0% increase in FGF18-positive hair follicles at one day post-IR and returned to basal levels at 11 days post-IR. A similar trend was observed from FGF18 gene expression analysis of skin. In bone (femora), there was an increase in the expression of the pro-osteoclastogenic cytokine, MCP-1, one day after IR compared to non-irradiated controls. FGF18 expression in skin and MCP- 1 expression in bone were found to be positively correlated (P less than 0.002, r=0.8779). Further, microcomputed tomography analysis of tibia from these animals showed reduced cancellous bone volume (-9.9%) at 11 days post- IR. These results suggest that measurements of early radiation induced changes in FGF18 gene expression in skin may have value for predicting subsequent loss of cancellous bone mass. Further research may lead to the development of a relatively simple diagnostic tool for bone loss, with the advantage that hair follicles and skin are relatively easy to acquire from human subjects.

space radiation↗

Space Rescue

Space rescue capability and proposed concepts to achieve it

SPACE LOGISTICS↗

In-space propellant systems safety. Volume 1: Executive summary

Safety problems connected with in-space propellant logistics operations are considered. Safety considerations resulting from the system safety analysis in the trade studies and evaluations of alternate operating concepts in the systems operations analysis are presented.

Source record↗

In-space propellant systems safety. Volume 3: System safety analysis

The primary objective was to examine from a system safety viewpoint in-space propellant logistic elements and operations to define the potential hazards and to recommend means to reduce, eliminate or control them. A secondary objective was to conduct trade studies of specific systems or operations to determine the safest of alternate approaches.

Source record↗

U.S. liquid propulsion technology stands still

NASA is currently conducting a comprehensive reevaluation of such fundamental launch vehicle-related issues as the appropriate balance between manned and unmanned launchers, reusable vs expendable vehicles and vehicle components, and the evolutionary vs innovative new-system development courses. Two trends have emerged, both emphasizing system expense: (1) low cost/manned flight vehicles for personnel transfer, small payloads, servicing, rescue, and Space Station logistics, and (2) low cost/unit mass vehicles for large and multiple payloads, propellants, bulk cargoes, and heavy upper stages. Attention is given to the contributions made by CFD to liquid-fueled engine component design.

Mccarty, John P.↗

Self-unloading, unmanned, reusable lunar lander project

A payload delivery system will be required to support the buildup and operation of a manned lunar base. In response, a self-unloading, unmanned, reusable lunar lander was conceptually designed. The lander will deliver a 7000 kg payload, with the same dimensions as a space station logistics module, from low lunar orbit to any location on the surface of the moon. The technical aspects of the design is introduced as well as the management structure and project cost.

Cowan, Kevin↗

The role of smart systems in rendezvous, close proximity operations and docking maneuvers

Various missions scenarios (Space Station logistics, LEO and GEO services, and SEI operation) will involve flexibility in mission management. This means operations will be one or a combination of the following: autonomous, supervised autonomous, and machine aided manual control. Smart Systems will likely play a significant role in making these missions successful from a safety/reliability perspective and less costly from an operations perspective. This does not imply that Smart Systems need to be super sophisticated. On the contrary, Smart Systems have been described as automated intelligence that if a person had done it wrong, it would be considered stupid. The first part of this paper will describe the types of Smart System techniques involved in AR and CC, their specifications, duties, and interactions. Next will be a discussion of the work performed under the auspice of the ALS Program to further Expert Systems applications imbedded in the control process, NASA/JSC CRAD, and other related IRAD projects. This will include issues pertaining to the following: integration, speed, knowledge encapsulation, and cooperative systems. Finally, a brief description will be offered to outline the major obstacles for the acceptance of Smart Systems in critical applications.

Szatkowski, Gerard P.↗

RS Landers: Lunar lander

The future of the U.S. space program outlined by President Bush calls for a permanently manned lunar base. A payload delivery system will be required to support the buildup and operation of that lunar base. In response to this goal, RS Landers developed a conceptual design of a self-unloading, unmanned, reusable lunar lander. The lander will deliver a 7000-kg payload, with the same dimensions as a space station logistics module, from low lunar orbit (LLO) to any location on the surface of the Moon.

Source record↗

Space Station thermal storage/refrigeration system research and development

Space Station thermal loading conditions represent an order of magnitude increase over current and previous spacecraft such as Skylab, Apollo, Pegasus III, Lunar Rover Vehicle, and Lockheed TRIDENT missiles. Thermal storage units (TSU's) were successfully used on these as well as many applications for ground based solar energy storage applications. It is desirable to store thermal energy during peak loading conditions as an alternative to providing increased radiator surface area which adds to the weight of the system. Basically, TSU's store heat by melting a phase change material (PCM) such as a paraffin. The physical property data for the PCM's used in the design of these TSU's is well defined in the literature. Design techniques are generally well established for the TSU's. However, the Space Station provides a new challenge in the application of these data and techniques because of three factors: the large size of the TSU required, the integration of the TSU for the Space Station thermal management concept with its diverse opportunities for storage application, and the TSU's interface with a two-phase (liquid/vapor) thermal bus/central heat rejection system. The objective in the thermal storage research and development task was to design, fabricate, and test a demonstration unit. One test article was to be a passive thermal storage unit capable of storing frozen food at -20 F for a minimum of 90 days. A second unit was to be capable of storing frozen biological samples at -94 F, again for a minimum of 90 days. The articles developed were compatible with shuttle mission conditions, including safety and handling by astronauts. Further, storage rack concepts were presented so that these units can be integrated into Space Station logistics module storage racks. The extreme sensitivity of spacecraft radiator systems design-to-heat rejection temperature requirements is well known. A large radiator area penalty is incurred if low temperatures are accommodated via a single centralized radiator system. As per the scope of work of this task, the applicability of refrigeration system tailored to meet the specialized requirements of storage of food and biological samples was investigated. The issues addressed were the anticipated power consumption and feasible designs and cycles for meeting specific storage requirements. Further, development issues were assessed related to the operation of vapor compression systems in micro-gravity addressing separation of vapor and liquid phases (via capillary systems).

Dean, W. G.↗

Rack Insertion End Effector (RIEE) automation

NASA is developing a mechanism to manipulate and insert Racks into the Space Station Logistic modules. The mechanism consists of the following: a base with three motorized degrees of freedom, a 3 section motorized boom that goes from 15 to 44 feet in length, and a Rack Insertion End Effector (RIEE) with 5 hand wheels for precise alignment. The robotics section was tasked with the automation of the RIEE unit. In this report, for the automation of the RIEE unit, application of the Perceptics Vision System was conceptually developed to determine the position and orientation of the RIEE relative to the logistic module, and a MathCad program is written to display the needed displacements for precise alignment and final insertion of the Rack. The uniqueness of this report is that the whole report is in fact a MathCad program including text, derivations, and executable equations with example inputs and outputs.

Malladi, Narasimha↗

Rack Insertion End Effector (RIEE) guidance

NASA-KSC has developed a mechanism to handle and insert Racks into the Space Station Logistic Modules. This mechanism consists of a Base with 3 motorized degrees of freedom, a 3 section motorized Boom that goes from 15 to 44 feet in length, and a Rack Insertion End Effector (RIEE) with 5 hand wheels for precise alignment. During the 1993 NASA-ASEE Summer Faculty Fellowship Program at KSC, I designed an Active Vision (Camera) Arrangement and developed an algorithm to determine (1) the displacements required by the Room for its initial positioning and (2) the rotations required at the five hand-wheels of the RIEE, for the insertion of the Rack, using the centroids fo the Camera Images of the Location Targets in the Logistic Module. Presently, during the summer of '94, I completed the preliminary design of an easily portable measuring instrument using encoders to obtain the 3-Dimensional Coordinates of Location Targets in the Logistics Module relative to the RIEE mechanism frame. The algorithm developed in '93 can use the output of this instrument also. Simplification of the '93 work and suggestions for the future work are discussed.

Malladi, Narasimha S.↗