Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SLAGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

Effect of Si Content in Electrode and SiO2 Additions to the Slag during Electroslag Remelting

Evolution of Si concentration in 316 stainless steel electrodes was observed during a melting campaign consisting of recycling electroslag remelted (ESR) ingots to make new electrodes using vacuum induction melting (VIM). This campaign consisted of iterations of VIM + ESR operations to optimize melting parameters. The effect of Si content on the melt parameters and ingot quality was further evaluated and additions of SiO2 to the slag chemistry were studied using research-scale experiments, x-ray diffraction (XRF), combustion analysis, visual inspections, and computational tools. The Si concentration was found to decrease by approximately 600 ppm following ESR of 150 lb. research-scale electrodes. Eventually, this led to failure of the slag skin and direct ingot/crucible contact. Additions of SiO2 to the slag at levels matching the original calculated Si concentration in the electrode did not eliminate the slag skin failure and the current during steady state increased to maintain a constant melt rate. In this investigation, we propose a mechanism of slag skin failure consisting of local concentration of current density due to absence, or breakage, of the SiO2 layer around the molten metal drop during ESR. This theory was reinforced by additional experiments in which Nb was added to the electrode to change the structure of the oxide layer around the drops.

Jablonski, Paul↗

CFD modeling and simulation for corrosive wear of refractory in molten slag

The development of high-wear resistant refractories having minimal production costs is facilitated by characterizing the wear mechanisms associated with their corrosive wear. Static cup testing is a commonly used method for comparing the corrosion resistance performance of two or more refractory materials. Although the static cup test conditions are not as severe as dynamic tests, this study shows that the thermal gradient present within the system during heating and cooling stages serves to generate movement of the slag leading to mechanical wear. The thermal gradient within the refractory, and between the slag and the refractory, occurs during the ramp stage of the test and lasts until the soaking stage is reached bringing the system to a thermal equilibrium. Using computational fluid dynamics (CFD) capabilities embedded within ANSYS software, this study modelled and quantified the convection currents within the slag and associated shear stresses generated on the refractory walls due to the thermal gradient. A traditional ladle furnace was employed as a case study to verify the results of the studied CFD model. The corrosion rate of the refractory lining was found to depend on the mass transfer coefficient of the refractory dissolution into the slag, and a velocity term which governs the extent of corrosion at any given location. This velocity term is a function of slag viscosity, as well as the concentration gradient and/or temperature gradient at the triple points. In this study, wall shear stress was used as a reliable proxy for identifying high-velocity regions prone to excessive corrosive wear. Elevated wall shear stress near the slag/air and slag/molten steel interfaces align with observed corrosion grooves, which reflects the intensified corrosive wear at these locations.

Ramteke, Rajat Rajat Durgesh Ramteke [University o↗

Removal of metallic iron on oxide slags

It is possible, in some cases, for ground coal particles to react with gasifier gas during combustion, allowing the ash material in the coal to form phases besides the expected slag phase. One of these phases is metallic iron, because some gasifiers are designed to operate under a reducing atmosphere (pO{sub 2}) of approximately 10{sup -4} atm). Metallic iron can become entrained in the gas stream and deposit on, and foul, downstream equipment. To improve the understanding of the reaction between different metallic iron particles and gas, which eventually oxidizes them, and the slag that the resulting oxide dissolves in, the kinetics of iron reaction on slag were predicted using gas-phase mass-transfer limitations for the reaction and were compared with diffusion in the slag; the reaction itself was observed under confocal scanning laser microscopy. The expected rates for iron droplet removal are provided based on the size and effective partial pressure of oxygen, and it is found that decarburization occurs before iron reaction, leading to an extra 30- to 100-second delay for carbon-saturated particles vs pure iron particles. A pure metallic iron particle of 0.5 mg should be removed in about 220 seconds at 1400{sup o}C and in 160 seconds at 1600{sup o}C.

01 COAL, LIGNITE, AND PEAT↗

A Structural Study on the Foaming Behavior of CaO-SiO{sub 2}-MO (MO = MgO, FeO, or Al{sub 2}O{sub 3}) Ternary Slag System

The foaming index of the CaO-SiO{sub 2}-MO (MO = MgO, FeO, or Al{sub 2}O{sub 3}) ternary slag system with a fixed CaO/SiO{sub 2} ratio is measured to understand the effect of the ionic structure. At 1773 K (1500 °C), the foaming index of the slag increases with Al{sub 2}O{sub 3} addition and decreases with MgO or FeO addition at a fixed CaO/SiO{sub 2} ratio. It is verified that the previous correlation between the foaming index and the physical properties could also be valid for the CaO-SiO{sub 2}-(MgO or Al{sub 2}O{sub 3}) system. Raman spectroscopy for the CaO/SiO{sub 2} = 1.0 slag is applied to explain the foaming behavior from an ionic structural perspective. From the ionic structural viewpoint, the fractional change in each silicate anion unit is identified by de-convoluted Raman spectra. The Raman spectra indicate that the silicate network structure is polymerized with Al{sub 2}O{sub 3} as an aluminosilicate structure; in contrast, de-polymerization occurs by MgO or FeO addition. Furthermore, the relationship between the silicate structure and the thermodynamic stability function is discussed. Since the ionic structure of the molten slag affects various physical/thermodynamic properties, the foaming behavior could be successfully interpreted from the ionic structural viewpoint.

36 MATERIALS SCIENCE↗

Rheological Evolution of Ti-Bearing Slag with Different Volume Fractions of TiN

The effect of the volume fraction of TiN (0 to 4.27 vol pct) on the rheological behaviors of Ti-bearing slag, including the viscosity and the constitutive equation, was investigated using a Brookfield rheometer at 1773 K. With the increasing TiN, the viscosity and the shear stress increased substantially, and the slag is converted from Newtonian to non-Newtonian. When the slag samples were dispersed with TiN (1.00 to 4.27 vol pct), the measured viscosities were greater than those estimated by the Einstein–Roscoe equation, and the complex internal structure was suggested to be responsible for the extra enhancement of the viscosity beyond that caused by TiN itself. The viscosity curves of the slag samples containing TiN (1.00 to 4.27 vol pct) were divided into three regions depending on the critical shear rate and the initial shear rate. In the Newtonian region, the apparent volume fraction of TiN was defined and used to develop a semiempirical model based on the Einstein–Roscoe equation to describe the viscosity. In the two non-Newtonian regions, the shear rate, the yield stress, and the viscosity differences between the non-Newtonians regions and the Newtonian regions were applied in developing the viscosity models.

36 MATERIALS SCIENCE↗

In Situ Observation of Calcium Aluminate Inclusions Dissolution into Steelmaking Slag

The dissolution rate of calcium aluminate inclusions in CaO-SiO{sub 2}-Al{sub 2}O{sub 3} slags has been studied using confocal scanning laser microscopy (CSLM) at elevated temperatures: 1773 K, 1823 K, and 1873 K (1500 °C, 1550 °C, and 1600 °C). The inclusion particles used in this experimental work were produced in our laboratory and their production technique is explained in detail. Even though the particles had irregular shapes, there was no rotation observed. Further, the total dissolution time decreased with increasing temperature and decreasing SiO{sub 2} content in the slag. The rate limiting steps are discussed in terms of shrinking core models and diffusion into a stagnant fluid model. It is shown that the rate limiting step for dissolution is mass transfer in the slag at 1823 K and 1873 K (1550 °C and 1600 °C). Further investigations are required to determine the dissolution mechanism at 1773 K (1500 °C). The calculated diffusion coefficients were inversely proportional to the slag viscosity and the obtained values for the systems studied ranged between 5.64 × 10{sup −12} and 5.8 × 10{sup −10} m{sup 2}/s.

36 MATERIALS SCIENCE↗

Prediction and Measurement of the Kinetics of Isothermal Crystallization and Devitrification of Mold Powder Slags

The rate and extent of formation of crystalline phases in the slag film that develops between the mold and the strand in steel continuous casting determine heat transfer and lubrication between them and therefore play crucial roles in shell integrity. In this work, a commercial mold powder for casting medium carbon (MC) thin steel slabs is selected for carrying out detailed comparisons between predicted and experimental results of the rates of isothermal crystallization and devitrification of liquid and glassy slag, respectively. Predictions are obtained with a kinetic model that combines the induction period (of Šimon and Kolman) and the Kissinger methods to evaluate time–temperature–transformation (TTT) diagrams for the devitrification and crystallization reactions associated with the peaks appearing in non-isothermal thermo-analysis traces. To obtain experimental validation of the diagram, a high-temperature confocal laser scanning microscope (HT-CLSM) is used to rapidly heat or cool a sample, ~ 140 mg, of glassy powder or liquid slag, respectively, to selected isothermal conditions, where it is held for a prescribed length of time before quenching. Identification and quantification of the phases present in the quenched samples are done by a quantitative X-ray powder diffraction analysis (QXRPDA) method that uses a PONKCS (partial or not known crystal structure) procedure based on Le Bail and Rietveld strategies for refinement of diffraction patterns. The many experimental results indicate that the predicted TTT diagrams for devitrification and crystallization of the mold slag give a good estimation of the rate of the transformations that take place at different temperatures and reveal the differences in the reactions that occur along both paths.

36 MATERIALS SCIENCE↗

Thermodynamic Study on MgO Solubility in High-Alumina-Content Slag System

In the current study, the MgO solubility in molten slag was measured to clarify the effect of basicity and Al{sub 2}O{sub 3} content on the MgO solubility equilibrating with the spinel solid phase in the CaO-SiO{sub 2}-Al{sub 2}O{sub 3} system. The MgO solubility decreased with the increasing basicity of the slag. However, the MgO solubility in the spinel equilibrium region exhibited different dependence when compared with the basicity dependence in the MgO equilibrium region. The aforementioned experimental results were quantitatively analyzed using magic-angle spinning (MAS) {sup 27}Al nuclear magnetic resonance (NMR) spectroscopy, in which the fraction of Al ions in the slag of spinel equilibrium region was changed to 4, 5, and 6. In addition, the analysis of the degree of Al avoidance modeling indicated that the change in bridging oxygen (BO) linkage species (distinguished into Al-O-Al, Si-O-Si, and Al-O-Si) was based on the Al/Si ratio change. The aforementioned change in BO linkage species led to a change in the MgO solubility with the stability of the alumina. Thus, the spinel equilibrium dissolution mechanism is discussed in detail in terms of the thermodynamic and structural influence in molten slag.

36 MATERIALS SCIENCE↗

Influence of Aluminum-Carbon Composite Pellets on FeO Reduction and Iron Recovery from Electric Arc Furnace Slag

We investigated the effect of Al-C composite pellets (ACCP) on the reduction behavior of FeO in electric arc furnace (EAF) slag and the iron recovery at different n{sub Al}/(n{sub Al} + n{sub C}) at 1823 K (1550 °C). A carbothermic reaction was the dominant process at n{sub Al}/(n{sub Al} + n{sub C}) < 0.4, whereas aluminothermic reduction was the major process at n{sub Al}/(n{sub Al} + n{sub C}) > 0.6; these observations are based on the final content of FeO and Al{sub 2}O{sub 3} in the molten slag. The aluminum and carbon present in the ACCP competitively affected the reaction stoichiometry (i.e., the material balance) between the production of CO + Al{sub 2}O{sub 3} and the consumption of FeO. Iron recovery increased up to a yield of approx. 90 pct as the n{sub Al}/(n{sub Al} + n{sub C}) ratio increased. Because Al in the ACCP readily reacts to reduce FeO in the molten slag, iron recovery is proportional to the n{sub Al}/(n{sub Al} + n{sub C}) ratio. The precipitation of solid compounds in the slag phase, such as monoxide ([Mg,Fe]·O) and spinel (MgO·Al{sub 2}O{sub 3}), occurred during FeO reduction; this was experimentally confirmed as well as by thermochemical computation. Furthermore, we proposed a schematic reaction mechanism in the present study.

36 MATERIALS SCIENCE↗

Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

The kinetics of dolime dissolution containing 20 and 50 pct of magnesium oxide in steelmaking slags has been studied in a high-temperature experiment. The dissolution tests were carried out under static conditions at temperatures of between 1573 K and 1873 K (1300 °C to 1600 °C). Cylindrical samples of dolime were introduced into pre-melted slag at predetermined time intervals. The changes in mass and geometrical parameters of the samples, as well as CaO and MgO concentrations in the melt, were determined to calculate mass transfer and diffusion coefficients. The results revealed that the rate-limiting step in the process of dolime dissolution is diffusion. The increase in MgO content in the initial sample caused a drop in dolime dissolution rate and diffusion coefficients. The prediction of MgO solubility in steel slag, as well as the effect of slag basicity, was carried out using the thermodynamic software FactSage 7.1. In addition, the activation energy of diffusion has been calculated using the dependence of the logarithm of diffusion coefficients on the inverse temperature.

36 MATERIALS SCIENCE↗

Dissolution Behavior and Phase Evolution During Aluminum Oxide Dissolution in BOF Slag

Basic oxygen furnace (BOF) slag is a byproduct in the steel making process and is produced in considerable amounts. Thus, its valorization is important. Additives such as Al{sub 2}O{sub 3} can be utilized to modify the composition and mineralogy of the slag provided that a fast and effective dissolution of these additives in molten slags can be ensured. With this in mind, the dissolution of Al{sub 2}O{sub 3} particles in molten BOF slag has been investigated between 1500 and 1600 °C. In all cases, a dissolution zone forms around the dissolving particle which limits the dissolution rate in the melt under natural convection conditions. The dissolution in the current system is found to be an indirect process, wherein crystalline reaction products like CaAl{sub 4}O{sub 7} (CA{sub 2}) and CaAl{sub 2}O{sub 4} (CA) form on the surface of the particles. CA forms at 1500 °C and CA{sub 2} at 1600 °C. These reaction products form a continuous layer on the surface of the dissolving particles but the thickness of this reaction layer remains limited. The experimental data have been utilized to evaluate the dissolution paths. Near the Al{sub 2}O{sub 3}/slag interface, the inter-diffusion of Al{sub 2}O{sub 3} and CaO occurs due to which the dissolution path shifts towards the Al{sub 2}O{sub 3}-CaO binary system. A phenomenological model is presented to explain the evolution of the dissolution process in the current system, wherein the kinetics of the process is used to explain the reaction products formed at 1500 °C and 1600 °C.

36 MATERIALS SCIENCE↗

Spatial zonation of a hydrotalcite-like phase in the inner product of slag: New insights into the hydration mechanism

The nano-structural evolution of the inner product of ground granulated blast furnace slag in blended cement at 7, 14, 28 56 and 180d was revealed. Three distinct layered inner hydration product region were observed because of the spatial zonation of hydrotalcite-like phase, C-A-S-H gel and Ca-Al LDH phase. The zonation of inner hydration product explains the presence of the multi-rims features of the slag grains with a relatively high reaction degree at very late ages. Diffusion of dissolved ion from slag grains and the effect of pore space on the reorganization of hydration products play a key role in forming the spatial zonation of inner hydration product. The findings of the zonation of inner region argue that the lack of pore space in the inner region makes the continued dissolution of slag hard to complete.

36 MATERIALS SCIENCE↗

Influence of CaO/FeO ratio on the formation mechanism and properties of alkali-activated Fe-rich slags

Highlights: • Effect of the CaO/FeO molar ratio in alkali-activated Fe-rich slags is unraveled. • Low CaO/FeO molar ratios enhance the early kinetics and compressive strength. • Reaction extent and strength further increase with higher CaO/FeO ratio after 7 days. • Fe{sup 2+}-trioctahedral layers of the binder are hydroxylated and in a silicate phase. • The final strength is determined by the influence of Ca on the reaction products. In the search for CO{sub 2} mitigating cement technologies, alkali-activated Fe-rich slags present a possible alternative. The influence of the chemical composition of the synthetic Fe-silicate slag on the reaction mechanisms is assessed by varying the CaO/FeO molar ratio. The alkali-activated Fe-rich slags consist of trioctahedral layers that are shown to be hydroxylated and in contact with silicates, in a similar way to phyllosilicate minerals. The formation of this phyllosilicate-like structure is hindered during the first days for samples with high CaO/FeO ratios, because of the partial incorporation of Ca in the trioctahedral layers. At later ages, the samples with higher CaO/FeO ratios gain in reaction extent, to exceed the reaction extent of low CaO/FeO ratios at 28 days and beyond. The increase in compressive strength is even more pronounced than the effect on the reaction extent, which underlines the importance of Ca on the inherent strength of the binding phases.

36 MATERIALS SCIENCE↗

Pressurized in situ X-ray diffraction insights into super/subcritical carbonation reaction pathways of steelmaking slags and constituent silicate minerals

This study explores mineral carbonation of industrial stainless steelmaking slags and relevant synthetic constituent minerals via in situ pressurized X-ray diffraction, to clarify carbonation reaction pathways and efficiency for carbon storage and waste valorization. The primary mineral phases of Argon Oxygen Decarburization (AOD) and Continuous Casting (CC) slags, namely, åkermanite, bredigite, cuspidine, merwinite, and β- and γ-C 2 S, were reacted in a custom-built beryllium-capped XRD reactor filled with either water-saturated (wet) subcritical CO 2 (g), or wet supercritical CO 2(SC) , in a series of carbonation experiments. Formation of calcite and aragonite was observed for most Ca-bearing minerals, transient precipitation of metastable vaterite was observed, while carbonation of AOD and CC slags in CO 2(SC) resulted in hydrated crystalline calcium carbonates and indirect evidence of amorphous carbonate. Overall, results obtained suggest that low-pressure subcritical carbonation routes are attractive for standalone slag carbonation processes, while high-pressure supercritical carbonation routes are amiable to symbiotic integration with CO 2(SC) -generating green technologies.

42 ENGINEERING↗

Kinetics of steel slag leaching: Batch tests and modeling

Reusing steel slag as an aggregate for road construction requires to characterize the leaching kinetics and metal releases. In this study, basic oxygen furnace (BOF) steel slag were subjected to batch leaching tests at liquid to solid ratios (L/S) of 10 and 100 over 30 days; the leachate chemistry being regularly sampled in time. A geochemical model of the steel slag is developed and validated from experimental data, particularly the evolution with leaching of mineralogical composition of the slag and trace element speciation. Kinetics is necessary for modeling the primary phase leaching, whereas a simple thermodynamic equilibrium approach can be used for secondary phase precipitation. The proposed model simulates the kinetically-controlled dissolution (hydrolysis) of primary phases, the precipitation of secondary phases (C-S-H, hydroxide and spinel), the pH and redox conditions, and the progressive release of major elements as well as the metals Cr and V. Modeling indicates that the dilution effect of the L/S ratio is often coupled to solubility-controlled processes, which are sensitive to both the pH and the redox potential. A sensitivity analysis of kinetic uncertainties on the modeling of element releases is performed.

36 MATERIALS SCIENCE↗

Use of a predictive model for the impact of cofiring coal/biomass blends on slagging and fouling propensity

The paper describes an investigation of slagging and fouling effects when cofiring coal/biomass blends by using a predictive model for large utility boilers. This model is based on the use a zone computational method to determine the midsection temperature profile throughout a boiler, coupled with a thermo-chemical model, to define and assess the risk of elevated slagging and fouling levels during cofiring of solid fuels. The application of this prediction tool was made for a 618 MW thermal wall-fired pulverized coal boiler, cofired with a typical medium volatile bituminous coal and two substitute fuels, sewage sludge and sawdust. Associated changes in boiler efficiency as well as various heat transfer and thermodynamic parameters of the system were analyzed with slagging and fouling effects for different cofiring ratios. The results of the modeling revealed that, for increased cofiring of sewage sludge, an elevated risk of slagging and high-temperature fouling occurred, in complete contrast to the effects occurring with the utilization of sawdust as a substitute fuel. 30 refs., 9 figs.,1 tab.

01 COAL, LIGNITE, AND PEAT↗

Seismic behavior of geogrid reinforced slag wall

Flexible retaining structures are known with their high performance under earthquake loads. In geogrid reinforced walls the performance of the fill material and the interface of the fill and geogrid controls the performance. Geosynthetic reinforced walls in seismic regions must be safe against not only static forces but also seismic forces. The objective of this study is to determine the behavior of a geogrid reinforced slag wall during earthquake by using shaking table experiments. This study is composed of three stages. In the first stage the physical properties of the material to be used were determined. In the second part, a case history involving the use of slag from steel industry in the construction of geogrid reinforced wall is presented. In the third stage, the results of shaking table tests conducted using model geogrid wall with slag are given. From the results, it is seen that slag can be used as fill material for geogrid reinforced walls subjected to earthquake loads.

58 GEOSCIENCES↗