Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Residual distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Review of Residual Stresses in Spent Nuclear Fuel Canisters

This report compiles the set of published results on the welding residual stress (WRS) distributions across the thickness section at the welds in spent nuclear fuel (SNF) canisters before and after a repair is done. The WRS information for similar steel structures with thick (~ 12.7 mm (0.5 inch)) large plate construction are also compiled to provide a comprehensive set of information on: methods to quantify; modeling to estimate; and methods to reduce WRS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

A Stochastic Approach to Reconstruct Gamma-Ray-burst Light Curves

Gamma-ray bursts (GRBs), as they are observed at high redshift ( z = 9.4), are vital to cosmological studies and investigating Population III stars. To tackle these studies, we need correlations among relevant GRB variables with the requirement of small uncertainties on their variables. Thus, we must have good coverage of GRB light curves (LCs). However, gaps in the LC hinder the precise determination of GRB properties and are often unavoidable. Therefore, extensive categorization of GRB LCs remains a hurdle. We address LC gaps using a stochastic reconstruction, wherein we fit two preexisting models (the Willingale model; W07; and a broken power law; BPL) to the observed LC, then use the distribution of flux residuals from the original data to generate data to fill in the temporal gaps. We also demonstrate a model-independent LC reconstruction via Gaussian processes. At 10% noise, the uncertainty of the end time of the plateau, its correspondent flux, and the temporal decay index after the plateau decreases by 33.3%, 35.03%, and 43.32% on average for the W07, and by 33.3%, 30.78%, 43.9% for the BPL, respectively. The uncertainty of the slope of the plateau decreases by 14.76% in the BPL. After using the Gaussian process technique, we see similar trends of a decrease in uncertainty for all model parameters for both the W07 and BPL models. These improvements are essential for the application of GRBs as standard candles in cosmology, for the investigation of theoretical models, and for inferring the redshift of GRBs with future machine-learning analyses.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1975

Further observations of BL Lacertae

Spectrophotometric observations of BL Lac have been obtained under conditions of fair to excellent seeing with BL Lac near the zenith. The nucleus was faint for all observations. Four absorption features identified as the Mg I and MgH band, the 4410-A band, the G-band, and H and K of Ca II, are observed. The redshift is approximately 0.070, in agreement with results in a previous paper. When the effects of the radiation from the central bright source are removed as well as possible, the residual spectral energy distribution is found to be very similar to that of a standard giant elliptical galaxy redshifted by 0.070 and reddened by a factor corresponding to a color excess of 0.28 to 0.40. The absolute visual magnitude of the underlying galaxy is -22.6 if the Hubble constant is 60 km/s per Mpc and the color excess is 0.28.

Thuan, T. X.↗
NASA NTRS1980

Measurement of suspended solids in lakes and oceans using satellite remote sensing data

Using satellite remote sensing data to measure low concentrations of suspended solids in lakes and oceans requires careful evaluation of background signals from the atmosphere and the water surface. Typical background corrections for Lake Superior are presented and the spectral distribution of the residual radiance from three major categories of turbidity in the lake are determined. The results indicate that for large bodies of water, some general information on atmospheric scattering, water clarity, and the optical properties of suspended solids allows estimates of concentrations of suspended solids to within + or - 0.5 mg/L without using real time ground truth data. Under calibrated conditions the threshold detection level is 0.3 mg/L for the fine particulates dispersed throughout the lake and 1 mg/L for the highly light absorbing effluent from rivers. Comparisons of the minimum reflectance over the open lake areas with reflection from the highly absorbing tannin water from rivers provides a check on the clarity of the atmosphere and the excessive background scatter from the water surface.

Sydor, M.↗
NASA NTRS1982

Parallax studies of four selected fields

Astrometric studies have been completed for four central stars Wolf 294, 39 Com, Case 2, and Vega - and selected reference stars in each of those regions. The parallax of Wolf 294 was measured as 0.1806 + or - 0.0033 arcsec. 39 Com is a visual/astrometric binary with an estimated period of 125 yr and a parallax of 0.0297 + or - 0.0044 arcsec. C 2 was measured as a white dwarf from a Warner and Swasey Observatory spectral survey; its white dwarf status is confirmed by its parallax of 0.0186 + or - 0.0109 arcsec. Vega's parallax was measured as 0.1243 + or - 0.0049 arcsec; a small apparent nonrandom distribution in the residuals is most likely an error from the neutral density filter used for magnitude reduction of the central star.

Russell, J. L.↗
NASA NTRS1987

On the distribution of sunspot cycle periods

A comparison is made between the observed distribution of sunspot cycle periods and distributions based on uniform, normal, and bimodal distributions. The bimodal distribution, composed of short-period and long-period cycles, is found to best describe the observed distribution. Compared to the normal distribution for the most reliably determined cycles (cycles 8-20), the bimodal distribution has a residual (sum of squares of differences) that is about 86 percent smaller. Means for short-period and long-period cycles are estimated to be 122 + or - 4 months and 140 + or - 5 months, respectively.

Wilson, Robert M.↗
NASA NTRS1991

Elasto-plastic coupled temperature-displacement finite element analysis of two-dimensional rolling-sliding contact with a translating heat source

The present paper describes a transient translating elastoplastic thermomechanical finite element model to study two-dimensional frictional rolling contact. Frictional two-dimensional contact is simulated by repeatedly translating a nonuniform thermomechanical distribution across the surface of an elastoplastic half space. The half space is represented by a two-dimensional finite element mesh with appropriate boundaries. Calculations are for an elastic-perfectly plastic material and the selected thermophysical properties are assumed to be temperature independent. The paper presents temperature variations, stress and plastic strain distributions and deformations. Residual tensile stresses are observed. The magnitude and depth of these stresses depends on (1) the temperature gradients and (2) the magnitudes of the normal and tangential tractions.

Rubin, C. A.↗
NASA NTRS2005

Surveillance system and method having an adaptive sequential probability fault detection test

System and method providing surveillance of an asset such as a process and/or apparatus by providing training and surveillance procedures that numerically fit a probability density function to an observed residual error signal distribution that is correlative to normal asset operation and then utilizes the fitted probability density function in a dynamic statistical hypothesis test for providing improved asset surveillance.

Herzog, James P.↗
NASA NTRS2006

Surveillance system and method having an adaptive sequential probability fault detection test

System and method providing surveillance of an asset such as a process and/or apparatus by providing training and surveillance procedures that numerically fit a probability density function to an observed residual error signal distribution that is correlative to normal asset operation and then utilizes the fitted probability density function in a dynamic statistical hypothesis test for providing improved asset surveillance.

Bickford, Randall L.↗
NASA NTRS2008

Surveillance System and Method having an Adaptive Sequential Probability Fault Detection Test

System and method providing surveillance of an asset such as a process and/or apparatus by providing training and surveillance procedures that numerically fit a probability density function to an observed residual error signal distribution that is correlative to normal asset operation and then utilizes the fitted probability density function in a dynamic statistical hypothesis test for providing improved asset surveillance.

Bickford, Randall L.↗
NASA NTRS2015

Tropical Simultaneous Nadir Observations for IR Sounder Evaluation and Comparison

Simultaneous Nadir Observations (SNOs) contain thousands of pairs of observations taken within 8 km and 10 minutes. SNOs have been very useful for comparisons in polar conditions. But classic SNO pairing criteria have very low yield in the tropics, making these SNOs less useful for investigating instrument performance for hotter scenes or scenes with high contrast. We introduce a modified methodology, which finds pairs of matched spectra in a wider angular range but is restricted to the tropics. We illustrate this with AIRS and CrIS data. Insight into instrument differences is gained from statistical distributions of the residual differences between the matched pairs. A sample analysis compares AIRS and CrIS brightness temperature at 900 cm-1 as function of scene brightness temperature. The proposed method may be applicable to matchups of other sensors on different spacecraft.

AIRS↗
NASA NTRS2018

Residual Stress Mapping of As-Built and Hot Isostatic Pressure Treated GRCop-84 as Fabricated by Selective Laser Melting

GRCop-84, a copper alloy developed by NASA Glenn Research Center (GRC) with the starting At% (atomic percent) Cu-8 Cr-4 Nb, has a copper matrix with a fine intermetallic dispersion of Cr2Nb (cubic Laves phase C15). The alloy is being developed for high-heat-flux applications and has excellent high temperature properties including retention of tensile strength at high temperatures, high thermal conductivity, and excellent creep resistance. GRCop-84 has shown higher survivability rates than other metal additive alloys, good surface finish, and requires less operator tweaking for builds, and this is not fully understood. Neutron diffraction provides an accurate, non-destructive method of measuring the thermal stresses accumulated during production; the primary source of failure before annealing. The unstressed lattice spacing (d (sub 0)), residual stress, and distribution have been characterized for simple shapes in HIP (Hot Isostatic Pressing,) and as-built conditions made with SLM (Selective Laser Melting), a powder bed fusion method, with the HIP samples showing significantly reduced stresses concentrations than the as-built.

Minnecci, Robert↗
NASA NTRS2021

The Dark Energy Survey Supernova Programme: Modelling Selection Efficiency and Observed Core-collapse Supernova Contamination

The analysis of current and future cosmological surveys of Type Ia supernovae (SNe Ia) at high redshift depends on the accuratephotometric classification of the SN events detected. Generating realistic simulations of photometric SN surveys constitutes anessential step for training and testing photometric classification algorithms, and for correcting biases introduced by selectioneffects and contamination arising from core-collapse SNe in the photometric SN Ia samples. We use published SN time-seriesspectrophotometric templates, rates, luminosity functions, and empirical relationships between SNe and their host galaxies toconstruct a framework for simulating photometric SN surveys. We present this framework in the context of the Dark EnergySurvey (DES) 5-yr photometric SN sample, comparing our simulations of DES with the observed DES transient populations.We demonstrate excellent agreement in many distributions, including Hubble residuals, between our simulations and data.We estimate the core collapse fraction expected in the DES SN sample after selection requirements are applied and beforephotometric classification. After testing different modelling choices and astrophysical assumptions underlying our simulation,we find that the predicted contamination varies from 7.2 to 11.7 per cent, with an average of 8.8 per cent and an r.m.s. of 1.1 percent. Our simulations are the first to reproduce the observed photometric SN and host galaxy properties in high-redshift surveyswithout fine-tuning the input parameters. The simulation methods presented here will be a critical component of the cosmologyanalysis of the DES photometric SN Ia sample: correcting for biases arising from contamination, and evaluating the associatedsystematic uncertainty.

M Vincenzi↗
NASA NTRS2021

LUVOIR-ECLIPS Closed-Loop Adaptive Optics Performance and Contrast Predictions

One of the primary science goals of the Large UV/Optical/Infrared Surveyor (LUVOIR) mission concept is to detect and characterize Earth-like exoplanets orbiting nearby stars with direct imaging. The success of its coronagraph instrument ECLIPS (Extreme Coronagraph for Living Planetary Systems) depends on the ability to stabilize the wavefront from a large segmented mirror such that optical path differences are limited to tens of picometers RMS during an exposure time of a few hours. In order to relax the constraints on the mechanical stability, ECLIPS will be equipped with a wavefront sensing and control (WS\&C) architecture to correct wavefront errors up to temporal frequencies $\gtrsim$1 Hz. These errors may be dominated by spacecraft structural dynamics exciting vibrations at the segmented primary mirror. In this work, we present detailed simulations of the WS\&C system within the ECLIPS instrument and the resulting contrast performance. This study assumes wavefront aberrations based on a finite element model of a simulated telescope with spacecraft structural dynamics. Wavefront residuals are then computed according to a model of the adaptive optics system that includes numerical propagation to simulate a realistic wavefront sensor and an analytical model of the temporal performance. An end-to-end numerical propagation model of ECLIPS is then used to estimate the residual starlight intensity distribution at the science detector. We show that the contrast performance depends strongly on the target star magnitude and the spatio-temporal distribution of wavefront errors from the telescope. In cases with significant vibration, we advocate for the use of laser metrology to mitigate high temporal frequency wavefront errors and increase the mission yield.

Sirbu, Dan↗
DOE OSTI2023

Comparison of Measured and Calculated Dose Rates for Ring Injection Dump Exchange at Spallation Neutron Source

According to the accelerator operation plan, the beam-stop and the proton beam window (PBW) assemblies of the existing Ring Injection Dump RID are replaced with fresh assemblies, when they have reached their end-of-life. End of-life is determinate by the stainless-steel beam-stop window having accumulated 10 dpa radiation damage. The exchange process took place during facility maintenance period that started in March 2023. Each of the spent assembles were put into specially designed storage containers temporarily residing near the RID building.The spent beam-stop is predicted to be the part of highest activation that has been removed in Spallation Neutron Source (SNS). The exchange processes require good work planning to minimize radiation exposure to personal. For each exchange step the residual dose rate distribution is calculated and the peak values are identified. This paper gives some examples of calculated vs measured doses during beam-stop assembly exchange.

Popova, Irina I.↗
DOE OSTI2021

Distribution of Bound and Free Water in Anatomical Fractions of Pine Residues and Corn Stover as a Function of Biological Degradation

Biomass quality is influenced by water’s abundance, distribution, and status in relation to other chemical species within the polymer matrix. Water interacts with polymers that make up the cell walls, and these interactions govern the physical and chemical changes that occur during the storage and preprocessing of biomass feedstocks. Time-domain nuclear magnetic resonance (TD-NMR) was employed to explore variations in the physical constraints of water within the lignocellulosic microstructure in distinct anatomical fractions of biomass and as a function of biological degradation. The Carr–Purcell–Meiboom–Gill sequence, when combined with knowledge of the chemical composition and physical structure of pine residues and corn stover anatomical fractions, gives an accurate measurement of the bound and free water. In this work, the impacts of storage and biological degradation were investigated to elucidate changes in the status and distribution of water within distinct plant tissues. We also investigate how degradation during storage affects water interactions in different pine residues (e.g., bark, branch, and needle) and corn stover (e.g., cob, leaf, and stalk) anatomical fractions using transverse relaxation times (T2). As demonstrated herein, TD-NMR provides quantitative data on lignocellulosic biomass–water interactions within anatomical fractions, which can further aid in the investigation of preprocessing effects on feedstock quality. Our findings suggest that biological heating enhances biomass–water interactions at the cellular and macromolecular scale. In addition, analysis of three-dimensional scanning electron microscopy reconstructions indicates that surface roughness wavelengths align with microscale roughness, suggesting that pine forestry residue and corn stover particles have primarily hydrophobic exterior surfaces. Furthermore, this study offers multiscale insights into understanding the microstructure, wettability, and chemical environment that dictate diffusion, enzyme access, and recalcitrance of lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2021

Experimental 3-dimensional tracking of the dynamics of a single electron in the Fermilab Integrable Optics Test Accelerator (IOTA)

We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolution digital cameras for the detection of synchrotron light emitted by the electrons. With 60–130 electrons in the machine, we measured beam lifetime and derived an absolute calibration of the optical system. At exposure times of 0.5 s, the cameras were sensitive to individual electrons. Camera images were used to reconstruct the time evolution of oscillation amplitudes of a single electron in all 3 degrees of freedom. The evolution of amplitudes directly showed the interplay between synchrotron-radiation damping, quantum excitations, and scattering with the residual gas. From the distribution of measured single-electron oscillation amplitudes, we deduced transverse emittances, momentum spread, damping times, and beam energy. Estimates of residual-gas density and composition were calculated from the measured distributions of vertical scattering angles. Combining scattering and lifetime data, we also provide an estimate of the aperture of the ring. To our knowledge, this is the first time that the dynamics of a single electron are tracked in all three dimensions with digital cameras in a storage ring.

43 PARTICLE ACCELERATORS↗