Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radiative recombination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reduced Energetic Disorders in Dion–Jacobson Perovskites for Efficient and Spectral Stable Blue LEDs

Metal halide perovskites have witnessed great success in green, red, and near-infrared light-emitting diodes (LEDs), yet blue LEDs still lag behind. Reducing undesired energetic disorders – broad n -phases and halide segregation – is considered as the most critical strategy to further improve the performances. Here, the study reports a newly designed and synthesized di-ammonium ligand with rigid π -conjugated rings and additional methyl groups to construct Dion–Jacobson (DJ) structure. Augmented coordination from the extra ammonium site and increased effective bulkiness from methyl groups lead to better distribution control over conventional mono-ammonium ligands. This enhances the radiative recombination of blue emissions in the film with homogeneous energy landscape and improved surface morphology, as evidenced by a series of imaging and mapping techniques. As a result, it demonstrates DJ perovskite LEDs (PeLEDs) with peak external quantum efficiencies of ≈4% at 484 nm and ≈11% at 494 nm, which are among the top reported for pure DJ phase-based PeLEDs in the corresponding wavelength regions. The results deepen the understanding of regulating energetic disorders in perovskite materials via molecular engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solution‐Processed Spin‐Polarized Light‐Emitting Diodes of Colloidal Quantum Wells and Magnetic Nanoparticles

Electrical injection of spin-polarized carriers into semiconductors enables circularly-polarized emission from spin-polarized light-emitting diodes (spin-LEDs). The incredible level of tunability of magnetic and electronic properties in colloidal nanocrystals offers unprecedented opportunities for the modulation of polarization of light in solution-processed spin-LEDs based on magnetic nanoparticles unlike epitaxially grown spin-LEDs restricted by a very limited range of materials for their exploitation, and solution-processed spin-LEDs based on chiral molecules, which do not allow the modulation of polarization in general. Here, it is shown that electrical injection of spin-polarized electrons from magnetic Fe 3 O 4 nanoparticles into CdSe/CdZnS core/shell colloidal quantum wells (CQWs) in solution-processed LEDs that allows for polarization modulation of electroluminescence. In this structure, a monolayer of face-down oriented CQWs is deposited as an active layer to avoid polarization losses due to the hopping of the electrons between the CQWs before the radiative recombination process. In this solution-processed spin-LED, the circular polarization reaches 4.5% at 3 K and survives up to 100 K. A net circular polarization is observed at zero magnetic field up to 100 K because of the remnant magnetization of the Fe 3 O 4 nanoparticles. This new colloidal spin-LED architecture presents significant prospects for future solution-processed advanced opto-spintronic devices.

circularly polarized electroluminescence↗
DOE OSTI2024

Polymer Passivated All Inorganic Micro‐Structured CsPbI x Br y Perovskite Toward Highly Efficient Photodetectors

Abstract Solution‐processed inorganic perovskites cause chemical and structural defects unfavorable for photodetector application. Using a binary solvent, defects in CsPbI x Br y (CPIB) perovskite are passivated with poly 4‐vinylpyridine (PVP) and Poly methyl methacrylate (PMMA) polymers. X‐ray photoelectron spectroscopy and FTIR spectra reveal a Lewis base‐acid interaction between Pb 2+ and polymer, confirming the passivation of CPIB perovskite. Scanning electron microscopy analysis shows a dual‐surface morphology with microribbons and microcrystals in perovskites. After PMMA treatment, CPIB perovskite exhibits a blue shift in the bandgap (1.8 to 1.95 eV), while the PVP induced a redshift, reducing the bandgap to 1.7 eV. Blue shift in PL analysis indicates modification of grain boundaries. A higher lifetime obtained for CPIB/PVP confirms the restraint of non‐radiative recombinations. Photodetectors are fabricated with pristine CPIB, CPIB/PVP, and CPIB/PMMA perovskites. The passivated CPIB/PVP‐based photodetector exhibits a quick rise time of ≈23 ms and a decay time of ≈17 ms. It also demonstrates a remarkable photoresponsivity of 23 mA W −1 , an internal quantum efficiency of 4.9%, and a detectivity of 15.0 × 10 10 Jones at 10 mW cm −2 light intensity. This approach shows the potential for environmentally stable polymers to passivate inorganic perovskites for high photodetection performance.

Shah, Shruti↗
DOE OSTI2020

High Efficiency Inverted GaAs and GaInP/GaAs Solar Cells With Strain-Balanced GaInAs/GaAsP Quantum Wells

High-efficiency solar cells are essential for high-density terrestrial applications, as well as space and potentially vehicle applications. The optimum bandgap for the terrestrial spectrum lies beyond the absorption range of a traditional dual junction GaInP/GaAs cell, with the bottom GaAs cell having higher bandgap energy than necessary. Lower energy bandgaps can be achieved with multiple quantum wells (QWs), but such a pathway requires advanced management of the epitaxial growth conditions in order to be useful. Strain-balanced GaAsP/GaInAs QWs are incorporated into a single junction GaAs solar cell and a dual junction GaInP/GaAs solar cell, leading to 27.2% efficiency in the single junction device and a one-sun record 32.9% efficiency in the tandem device. Good carrier collection and low non-radiative recombination are observed in the cells with up to 80 QWs. The GaAs cells employ a rear-heterojunction architecture to boost the open-circuit voltage to over 1.04 V in the quantum well device, despite the large number of QWs.

14 SOLAR ENERGY↗
DOE OSTI2023

Linking Phase Behavior to Performance Parameters in Non-Fullerene Acceptor Solar Cells

Performance of nonfullerene-based organic solar cells is largely dependent on the donor:acceptor blend morphology, which is initially tuned by composition. However, morphological design rules are difficult to identify due to the complex relationship between composition-dependent phase behavior and performance properties. In this study, the authors are able to establish a direct link between PM6:Y6 film morphology and device properties by combining grazing-incidence wide-angle X-ray scattering with highly sensitive Fourier transform photocurrent spectroscopy. By analyzing properties across the full composition range, interfacial microstructure and the corresponding charge transfer (CT) states are identified and direct structure–property relationships are established. Here the results indicate that open-circuit voltage is controlled by the CT state at amorphous-PM6:crystalline-Y6 interfaces. Crystalline Y6 is found to increase both transport and non-radiative recombination, suggesting that morphological tradeoffs may be necessary for overall device optimization.

14 SOLAR ENERGY↗
DOE OSTI2023

Photochemical Decomposition of Y‐Series Non‐Fullerene Acceptors Is Responsible for Degradation of High‐Efficiency Organic Solar Cells

Abstract Organic photovoltaic cells that employ Y‐series non‐fullerene acceptors (NFAs) have recently achieved impressive power‐conversion efficiencies (>18%). To fulfill their commercial promise, it is important to quantify their operational lifetimes and understand their degradation mechanisms. In this work, the spectral‐dependent photostability of films and solar cells comprising several Y‐series acceptors and the donor polymer PM6 is investigated systematically. By applying longpass filters during aging, it is shown that UV/near‐UV photons are responsible for the photochemical decomposition of Y‐series acceptors; this degradation is the primary driver of early solar cell performance losses. Using mass spectrometry, the vinylene linkage between the core and electron‐accepting moieties of Y‐series acceptors is identified as the weak point susceptible to cleavage under UV‐illumination. Employing a series of device characterization, along with numerical simulations, the efficiency losses in organic photovoltaic cells are attributed to the formation of traps, which reduces charge extraction efficiency and facilitates non‐radiative recombination as the Y‐series acceptors degrade. This study provides new insights for molecular degradation of organic photovoltaic absorber materials and highlights the importance of future molecular design and strategies for improved solar cell stability.

14 SOLAR ENERGY↗
DOE OSTI2024

Iodine Modulates the MACl‐Assisted Growth of FAPbI 3 for High Efficiency Perovskite Solar Cells

The preferential growth of α-phase formamidinium perovskite (α-FAPbI 3 ) at low temperatures can be achieved with the incorporation of chloride-based additives, with methylammonium chloride (MACl) being the most common example. However, compared to other less-volatile chloride additives, MACl only remains in the growing perovskite film for a short time before evaporating during annealing, primarily influencing the early stages of film formation. In addition, evaporation of MACl as methylamine (MA 0 ) and HCl can introduce a side reaction between MA 0 and formamidinium (FA), undermining the compositional purity and phase stability of α-FAPbI 3 . In this study, it is demonstrated that addition of iodine (I 2 ) into the FAPbI 3 precursor solution containing MACl suppresses the MA-FA side reaction during annealing. Additionally, MACl evaporation is delayed owing to strong interaction with triiodide. The added I 2 facilitates spontaneous growth of α-FAPbI 3 prior to annealing, with an improved bottom morphology due to the formation of fewer byproducts. Perovskite solar cells derived from an I 2 -incorporated solution deliver a champion power conversion efficiency of 25.2% that is attributed to suppressed non-radiative recombination.

14 SOLAR ENERGY↗
DOE OSTI2025

Contracted, Not Converted: Photoluminescence Thermochromism in Ultrabright Pure Blue Emissive Hybrid Copper(I) Halide

Thermochromic luminescent materials are promising for applications such as sensors or display technologies. Understanding the mechanism of thermochromic luminescence in these materials plays an important role for their targeted applications. Here, a 0D copper(I) halide (TMP)2CuBr3 and 1D (TMP)Ag2Br3 (TMP = tetramethylphosphonium) are reported. While (TMP)Ag2Br3 is a weak light emitter, (TMP)2CuBr3 demonstrates ultrabright pure blue emission with photoluminescence (PL) quantum yield exceeding 90% within the temperature range 300–80 K. The emission in (TMP)2CuBr3 is attributed to the radiative recombination of self-trapped excitons (STEs) that arise localized on [CuBr3]2− anions. (TMP)2CuBr3 demonstrates excitation-selective PL thermochromism at low temperatures. In the literature, the origin of multiple STEs is often unclear in luminescent metal halides. Here, a detailed temperature-dependent spectroscopic and structural analysis suggests that the PL thermochromism in (TMP)2CuBr3 is associated with the appearance of a second STE state. The appearance of second STE is expected to have a structural origin, and it may be associated with the observed anomaly in thermal contraction near 200 K. The distinct PL features of melt-processible (TMP)2CuBr3 coupled with its remarkable photo- and thermal stability allow its consideration for practical optical applications, including temperature sensing.

Popy, Dilruba [University of Oklahoma, Norman]↗
DOE OSTI2025

Full Device Evaluation of Metal Halide Perovskite Solar Cells in Low Earth Orbit Aboard the International Space Station

This study investigates how sustained low Earth orbit (LEO) exposure affects metal halide perovskite (MHP) thin films and perovskite solar cells (PSCs). It examines samples deployed on the Materials International Space Station Experiment (MISSE) 15 and 16 missions. Five methylammonium lead iodide (MAPI) thin films are deployed on MISSE-16, each with distinct UV filters to selectively attenuate AM0 spectral bands. While post-flight optical analysis reveals that the least UV-exposed film exhibits the highest emission and lowest non-radiative recombination rate, no clear correlation is observed among the rest, and all MAPI films maintained excellent integrity throughout the mission. MISSE-15 deployed eight PSCs with diverse structures, MHP compositions, and contact materials. Post-flight analysis reveals stable, highly emissive MHPs, but damaged contacts due to ion migration, which caused loss of electrical response. The MISSE missions demonstrate MHPs' suitability for space applications, while highlighting the need for improved interfacial layers and contact materials to enhance charge carrier mobility, prevent ion migration, and improve charge carrier extraction efficiency.

14 SOLAR ENERGY↗
DOE OSTI2026

Single-Particle Insights Into the Electronic Structure and Enhanced Stability of CsPbBr 3 /FAPbBr 3 Core/Crown Nanoplatelets at the Nanometer Scale

Colloidal perovskite nanoplatelets (NPLs), despite their exceptional optoelectronic properties, face significant challenges due to their intrinsic instability and trap-assisted non-radiative recombination. Although many studies employing surface engineering, such as selecting ligands or coating to passivate defects, have demonstrated improved optoelectronic properties, these enhancements are typically inferred from bulk-ensemble measurements; the effects at the single-particle level remain elusive. Here, we conduct single-particle-level studies using scanning tunneling spectroscopy (STS) on a unique core–crown system, CsPbBr 3 @FAPbBr 3 NPLs, where the lateral surfaces of the CsPbBr 3 core are coated with an FAPbBr 3 crown. Experimental density-of-states (DOS) analysis reveals a 47% reduction in deep-trap states in core-crown NPLs compared to core-only NPLs, consistent with nearly two-fold enhancements in photoluminescence quantum yields. Progressive I–V sweep measurements demonstrate superior electrical stability in core-crown NPLs, preserving band structure with minimal degradation, while core-only NPLs exhibit rapid bandgap shrinkage and trap formation. Density functional theory (DFT) calculations indicate that FA incorporation distorts Pb octahedral lattice, widening the bandgap. This study elucidates how surface engineering modulates charge localization, passivates defects, and enhances stability at the single-particle level. Moreover, by uncovering bias-induced trap states in single unpassivated NPLs, this study establishes a precise, robust approach for characterizing emerging perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices

Perovskite solar cells (PSCs) exhibited remarkable progress for small aperture area cells, however, the performance of its counterpart, large aperture area cells, lags due to non-uniform and defective perovskite layers. Here, we fabricate reproducible large area homogeneous perovskite films at room temperature and without controlling humidity (up to 40 % RH) with a slot die coater on a c-TiO 2 layer deposited using a large area chemical bath. A new artificial peptide – sulfonyl-γ-AApeptide (F-GLU-S) was employed to modify the slot-die coated perovskite surface, grain boundaries and electronic defects. The multi-functional F-GLU-S with carbonyl, carboxyl, sulfonyl, benzene, and chloro groups was capable of strongly interacting with the perovskite layer and repairing the uncoordinated Pb 2+ ions and halide vacancies. As a result, both the electron and hole densities of defects were significantly suppressed; consequently, the non-radiative recombination was effectively suppressed for the modified device which can be explicitly seen in the device performance where both V oc and FF of the modified device improved considerably. Therefore, F-GLU-S modified slot-die coated MAPbI 3 – based devices demonstrated outstanding performance of 21.44 % PCE with a V oc of 1.13 V, J sc of 24.64 cm –2 , and FF 76.99 %. Furthermore, F-GLU-S passivation impeded the infiltration of moisture and oxygen due to its hydrophobic nature and defect repair potential. As a result, the modified device retained above 92 % of its original PCE after 720 h in air (room temperature and 40–60 % RH).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Simultaneously improving device efficiency and stability is the most important issue in perovskite solar cell (PSC) research. Here, we strategically introduce a multi-functional interface layer (MFIL) with integrated roles of: (1) electron transport, (2) moisture barrier, (3) near-infrared photocurrent enhancement, (4) trap passivation, and (5) ion migration suppression to enhance the device performance. The narrow-band-gap non-fullerene acceptor, Y6, was screened out to replace the most commonly used PCBM in the inverted PSCs. A significantly improved power conversion efficiency of 21.0% was achieved, along with a remarkable stability (up to 1,700 h) without encapsulation under various external stimuli (light, heat, and moisture). Furthermore, systematic studies of the molecular orientation or passivation and the charge carrier dynamics at the interface between perovskite and MFIL were presented. These results offer deep insights for designing advanced interlayers and establish the correlations between molecular orientation, interface molecular bonding, trap state density, non-radiation recombination, and the device performance.

14 SOLAR ENERGY↗
DOE OSTI2024

Supramolecular design principles in pseudohalides for high-performance perovskite solar mini modules

In this work, we reveal the role of non-covalent interactions, which are known to play important roles in supramolecular phenomena, in achieving efficient perovskite surface and grain boundary passivation. By using a series of pseudohalides, we find that trifluoroacetate (TFA - ) provides the strongest binding to iodide vacancies by means of non-covalent hydrogen bonding and dispersion interactions. By exploiting additional non-covalent dispersion and hydrophobic interactions in aromatic 3,3-diphenylpropylammonium (DPA + ), we present a dual-ion passivation strategy that not only minimizes the non-radiative recombination center and local chemical inhomogeneities but also induces preferentially oriented growth of α-FAPbI 3 lattice. Further, this leads to an outstanding power conversion efficiency (PCE) of 25.63% with an exceptional open-circuit voltage of 1.191 V in a perovskite solar cell with a small area, while perovskite solar mini modules with aperture areas of 25 and 64cm 2 achieved PCE of 22.47% (quasi-steady-state [QSS]-certified 20.50%) and 20.88%, respectively, with outstanding stability under high-humidity conditions.

14 SOLAR ENERGY↗
DOE OSTI2022

Concentric core-shell tracks and spectroscopic properties of SrTiO 3 under intense electronic excitation

A deeper understanding of the intrinsic link between the irradiation-induced microstructures and the corresponding spectroscopic properties is becoming increasingly attractive for the research fields of materials science, physics, and information technology. In this work, the structural damage response, spectroscopic features, and associated physical mechanisms of SrTiO 3 single crystals under swift heavy ion irradiation were comparatively analyzed using a combination of experimental and theoretical approaches. Corresponding to 0.11–5.00 MeV/u ion irradiation with electronic energy loss ranging from 4.0 to 29.3 keV/nm, the inelastic thermal spike calculations combined with molecular dynamics simulations are compared with the experimental observations, revealing the track fine structures (individual spherical defects with a disordered region, and discontinuous and continuous tracks consisting of an amorphous core and a disordered outer shell) and demonstrating the dominant effects of the deposition energy and lattice temperature on track damage formation and evolution; thus, two essential thresholds for defect formation of ~0.60 eV/atom and amorphous region formation of ~1.81 eV/atom were identified to better describe the concentric core-shell track structure. The enhanced nanohillock formation in the surface region is attributed to the combined action of kinetic and potential energy depositions, and the fluence dependence in regulating the hillock dimensions is also presented. The measured refractive index profiles along different crystal axes further indicate the anisotropy of irradiation-induced lattice expansion. With increasing ion fluence and damage level, the intrinsic bandgap gradually decreased, and the concentration of additional radiative recombination centers (1.81 eV, 2.31 eV, and 2.42 eV) accordingly increased in the SrTiO 3 crystal, providing the possibility of regulating related defects to achieve tunable/selective photon emission for more critical technological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Efficient and stable perovskite solar cells based on blade-coated CH 3 NH 3 PbI 3 thin films fabricated using “green” solvents under ambient conditions

Metal halide perovskites are considered the most promising candidates for solar cells of the decade due to their exceptional optical and electronic properties. The power conversion efficiency of metal halide perovskites, when incorporated as the active layer of solar cells, has become comparable to that observed for conventional silicon solar cells. However, the stability, scaleup, green solvent usage, and fabrication in ambient conditions of metal halide perovskites need to be solved for commercial applications. Here, in this work, we report the fabrication of blade-coated methylammonium lead iodide (MAPbI 3 ) perovskite thin films using methylamine and acetonitrile as “green” solvents under ambient conditions. Our perovskite films are initially prepared from low purity PbI2 (99%) and are blade-coated in dry air at relative humidity (RH) levels above 30%. A significant advantage of fabricating our perovskite thin films via blade-coating protocols is that there is a minimal amount of precursors (5 μL) used compared to spin-coating methods (50μL–60μL) for a 4 cm 2 substrate. With the addition of a small amount of an organic halide salt, namely, phenethylammonium chloride, the film crystallinity is improved and non-radiative recombination is suppressed, resulting in power conversion efficiencies over 20%. In addition, the device maintains more than 95% of its initial efficiency after 500 h under continuous light illumination of 1-sun at open circuit conditions, 50 °C and 60% RH. The above method leads a path towards the commercial fabrication of perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2023

A comprehensive material study of CdSeTe films deposited with differing selenium compositions

The addition of selenium into CdTe to create the ternary alloy CdSeTe has been one of the most impactful advancements to CdTe-based photovoltaics in the last decade. CdSeTe/CdTe bilayer device structures have enabled a gain in short-circuit current due to the narrower bandgap of the alloy, with minimal to no loss in voltage. Intensity of photoluminescence and time-resolved photoluminescence measurements suggest this is due to an increase in carrier lifetime and concomitant greater fraction of radiative vs non-radiative recombination events which allows for a reduction in the voltage deficit. Here, in this work, we study the properties of as-deposited and CdCl 2 -treated CdSeTe films deposited by close-space sublimation under varying conditions from CdSeTe source charges with both 20 and 40 mol% CdSe. We find that the selenium content in the deposited films are substantially reduced from that of the source material. Additionally, deposition temperature, particularly that of the substrate, considerably affects the grain size, crystallinity, and photoluminescence of the material, illustrating the importance of source material selection and process optimization. Finally, we present evidence that the source material, and therefore the properties of the deposited films, change over time as the source material is used.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Excitonic Dynamics in Janus MoSSe and WSSe Monolayers

We report here details of steady-state and time-resolved spectroscopy of excitonic dynamics for Janus transition metal dichalcogenide monolayers, including MoSSe and WSSe, which were synthesized by low-energy implantation of Se into transition metal disulfides. Absorbance and photoluminescence spectroscopic measurements determined the room-temperature exciton resonances for MoSSe and WSSe monolayers. Transient absorption measurements revealed that the excitons in Janus structures form faster than those in pristine transition metal dichalcogenides by about 30% due to their enhanced electron–phonon interaction by the built-in dipole moment. Here, by combining steady-state photoluminescence quantum yield and time-resolved transient absorption measurements, we find that the exciton radiative recombination lifetime in Janus structures is significantly longer than in their pristine samples, supporting the predicted spatial separation of the electron and hole wave functions due to the built-in dipole moment. These results provide fundamental insight in the optical properties of Janus transition metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Transient X-ray Diffraction Reveals Nonequilibrium Phase Transition in Thin Films of CH 3 NH 3 PbI 3 Perovskite

Advantageous optoelectronic properties of methylammonium lead triiodide likely arise from coupling between photogenerated charge-carriers and the soft, deformable lattice. We investigate structural dynamics of MAPbI 3 films using time-resolved X-ray diffraction versus pump-probe time delay and pump intensity. During the first nanosecond, the lattice anisotropically distorts from tetragonal to cubic at excitation intensities that are insufficient to thermally induce the first-order thermodynamic phase transition at 330K. Further, the high-symmetry structure then relaxes back to the starting phase with 11 and 236-ns time constants via a different transition pathway than observed either in the first nanosecond or in previous reports for MAPbI 3 . Early-time dynamics are consistent with polaron formation and lattice strain stabilization while the slower recovery dynamics outlive radiative recombination and relates metastability. Fluence-independence of these lattice deformations in the low-power regime conveys relevance to optoelectronics including photovoltaics and highlights sustained involvement of non-equilibrium, photoinduced lattice reorganization in MAPbI 3 under functional conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗