Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Revealing Structural Evolution of Single Atom Catalysts during Electrochemical CO 2 Reduction by in Situ X-ray Absorption Spectroscopy

Investigating the structural variation of single-atom catalysts (SACs) is crucial to reveal the reaction mechanism under working conditions. Different in situ techniques, especially X-ray absorption spectroscopy (XAS), have been reported to study the structural changes in active sites. However, a systematic study of the relationship between the coordination environment and the catalytic ability of different kinds of SACs is still lacking. Herein, we established isolated transition metal atoms (Fe, Co, Ni, Cu) on N-doped carbon (M-N-C) and employed them in electrocatalytic CO 2 reduction reaction (CO 2 RR). Significantly, Ni-N-C exhibits the highest selectivity (similar to 97.9%) toward CO at -0.8 V vs RHE. In situ XAS characterization discloses the coordination number dependent catalytic performance. Further, the decreased average coordination number of Ni in Ni-N-C at the voltage point with maximum Faradaic efficiency was observed. Density functional theory further provides the possible mechanism of CO 2 -to-CO over the undercoordinated Ni-N-C structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synergistic Multisites Fe 2 Mo 6 S 8 Electrocatalysts for Ambient Nitrogen Conversion to Ammonia

Electrochemical hydrogenation of N 2 under ambient conditions is attractive for sustainable and distributable NH 3 production but is limited by the lack of selective electrocatalysts. In this work, we describe active site motifs based on the Chevrel phase chalcogenide Fe 2 Mo 6 S 8 that exhibit intrinsic activities for converting N 2 to NH 3 in aqueous electrolytes. Despite having a very low specific surface area of ~2 m 2 /g, this catalyst exhibited a Faradaic efficiency of 12.5% and an average rate of 70 μg h –1 mg cat –1 for NH 3 production at -0.20 V vs RHE. Such activities were attributed to the unique composition and structure of Fe 2 Mo 6 S 8 that provide synergistic multisites for activating and associating key reaction intermediates. Specifically, Fe/Mo sites assist adsorption and activation of N 2 , whereas S sites stabilize hydrogen intermediate H ad * for N 2 hydrogenation. Fe in Fe 2 Mo 6 S 8 enhances binding of S with H ad * and thus inhibits the competing hydrogen evolution reaction. The spatial geometry of Fe, Mo, and S sites in Fe 2 Mo 6 S 8 promotes conversion of N 2 –H ad * association intermediates, reaching a turnover frequency of ~0.23 s –1 for NH 3 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Porous Two-dimensional Iron-Cyano Nanosheets for High-rate Electrochemical Nitrate Reduction

Ammonia (NH 3 ) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber–Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N 2 ) reduction, electrochemical nitrate reduction reaction (NO 3 RR), with a higher NH 3 yield rate and Faradaic efficiency, holds promise for efficient NH 3 production under ambient conditions. To achieve efficient NO 3 RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH 3 yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO 3 RR. Owing to the strong adsorption of nitrate on Fe0 active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h –1 mgcat –1 and a Faradaic efficiency of over 90% toward NH 3 production at –0.5 V (vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO 3 RR activity. Finally, an electrolyzer toward NO 3 RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO 3 RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First-Row Transition Metal Antimonates for the Oxygen Reduction Reaction

The development of inexpensive and abundant catalysts with high activity, selectivity, and stability for the oxygen reduction reaction (ORR) is imperative for the widespread implementation of fuel cell devices. Herein, we present a combined theoretical–experimental approach to discover and design first-row transition metal antimonates as excellent electrocatalytic materials for the ORR. Theoretically, we identify first-row transition metal antimonates–MSb 2 O 6 , where M = Mn, Fe, Co, and Ni–as nonprecious metal catalysts with good oxygen binding energetics, conductivity, thermodynamic phase stability, and aqueous stability. Among the considered antimonates, MnSb 2 O 6 shows the highest theoretical ORR activity based on the 4e – ORR kinetic volcano. Experimentally, nanoparticulate transition metal antimonate catalysts are found to have a minimum of a 2.5-fold enhancement in intrinsic mass activity (on transition metal mass basis) relative to the corresponding transition metal oxide at 0.7 V vs RHE in 0.1 M KOH. MnSb 2 O 6 is the most active catalyst under these conditions, with a 3.5-fold enhancement on a per Mn mass activity basis and 25-fold enhancement on a surface area basis over its antimony-free counterpart. Electrocatalytic and material stability are demonstrated over a 5 h chronopotentiometry experiment in the stability window identified by theoretical Pourbaix analysis. Furthermore, this study further highlights the stable and electrically conductive antimonate structure as a framework to tune the activity and selectivity of nonprecious metal oxide active sites for ORR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Highly Oxidized Oxide Surface toward Optimum Oxygen Evolution Reaction by Termination Engineering

The oxygen evolution reaction (OER) is a critical step for sustainable fuel production through electrochemistry process. Maximizing active sites of nanocatalyst with enhanced intrinsic activity, especially the activation of lattice oxygen, is gradually recognized as the primary incentive. Since the surface reconfiguration to oxyhydroxide is unavoidable for oxygen-activated transition metal oxides, developing a surface termination like oxyhydroxide in oxides is highly desirable. In this work, we demonstrate an unusual surface termination of (111)-facet Co 3 O 4 nanosheet that is exclusively containing edge-sharing octahedral Co 3+ similar to CoOOH that can perform at approximately 40 times higher current density at 1.63 V (vs RHE) than commercial RuO 2 . It is found that this surface termination has an oxidized oxygen state in contrast to standard Co-O systems, which can serve as active site independently, breaking the scaling relationship limit. Finally, this work forwards the applications of oxide electrocatalysts in the energy conversion field by surface termination engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fluorine-Tuned Carbon-Based Nickel Single-Atom Catalysts for Scalable and Highly Efficient CO 2 Electrocatalytic Reduction

Electrocatalytic CO 2 reduction is garnering significant interest due to its potential applications in mitigating CO 2 and producing fuel. However, the scaling up of related catalysis is still hindered by several challenges, including the cost of the catalytic materials, low selectivity, small current densities to maintain desirable selectivity. In this study, Fluorine (F) atoms were introduced into an N-doped carbon-supported single nickel (Ni) atom catalyst via facile polymer-assisted pyrolysis. This method not only maintains the high atom utilization efficiency of Ni in a cost-effective and sustainable manner but also effectively manipulates the electronic structure of the active Ni-N 4 site through F doping. The catalyst has also been further optimized by controlling the F states, including convalent and semi-ionic states, by adjusting the fluorine sources involved. Consequently, this catalyst with unique structure exhibited comparable electrocatalytic performance for CO 2 -to-CO conversion, achieving a Faradaic efficiency (FE) of over 99% across a wide potential range and an exceptional CO evolution rate of 9.5 x 10 4 h -1 at -1.16 V vs reversible hydrogen electrode (RHE). It also delivered a practical current of 400 mA cm -2 while maintaining more than 95% CO FE. Experimental analysis combined with density functional theory (DFT) calculations have also shown that F-doping modifies the electron configuration at the central Ni-N 4 sites. In conclusion, this modification lowers the energy barrier for CO 2 activation, thereby facilitating the production of the crucial *COOH intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Rational Design and Synthesis of Hierarchical Porous Mn–N–C Nanoparticles with Atomically Dispersed MnNx Moieties for Highly Efficient Oxygen Reduction Reaction

Developing transition-metal excluding iron and cobalt–nitrogen–carbon (M–N–C) electrocatalysts for the oxygen reduction reaction (ORR) is critical to substantially promote the development of precious-metal-free metal–air batteries and fuel cells. In the work, Mn–N–C nanoparticles with atomically dispersed MnNx moieties were synthesized by pyrolyzing Mn-ion–dual-pyridine coordinated complex, which was obtained via a simple condensation reaction between 2,6-diamino-pyridine and 2,6-diacetyl-pyridine with MnCl 2 as the Mn source. The precursor features with a characteristic structure of dual-pyridine ligand, which possesses a strong coordinating capability for Mn 2+ , facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (MnN x ). Attributed to the highly active atomic MnN x sites, hierarchical pore structure, and high surface area of the Mn–N–C derived from the new precursor, it exhibits outstanding ORR performance in 0.1 M KOH with an almost direct four-electron reaction path and high selectivity of O 2 into H 2 O (low H2O2 production <3.5%). The half-wave potential of Mn–N–C is 0.88 V vs RHE, which is 20 mV higher than that of commercial Pt/C catalyst and reaches to the level of Fe–N–C catalyst obtained by the same method. Meanwhile, the feasibility of Mn–N–C for practical application is validated by its higher-performance power output in Zn–air battery with a maximum power density of 132 mW cm –2 compared to that of Pt/C (121 mW cm –2 ) using the same catalyst loading of 1.0 mg cm –2 . This work develops a convenient route to develop non-Fe or Co–N–C electrocatalyst for the ORR.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Revisiting Understanding of Electrochemical CO 2 Reduction on Cu(111): Competing Proton-Coupled Electron Transfer Reaction Mechanisms Revealed by Embedded Correlated Wavefunction Theory

Copper (Cu) electrodes, as the most efficacious of CO 2 reduction reaction (CO 2 RR) electrocatalysts, serve as prototypes for determining and validating reaction mechanisms associated with electrochemical CO 2 reduction to hydrocarbons. As in situ electrochemical mechanism determination by experiments is still out of reach, such mechanistic analysis typically is conducted using density functional theory (DFT). The semilocal exchange-correlation (XC) approximations most often used to model such catalysis unfortunately engender a basic error: predicting the wrong adsorption site for CO (a key CO 2 RR intermediate) on the most ubiquitous facet of Cu, namely, Cu(111). This longstanding inconsistency casts lingering doubt on previous DFT predictions of the attendant CO 2 RR kinetics. Here, we apply embedded correlated wavefunction (ECW) theory, which corrects XC functional error, to study the CO 2 RR on Cu(111) via both surface hydride (*H) transfer and proton-coupled electron transfer (PCET). We predict that adsorbed CO (*CO) reduces almost equally to two intermediates, namely, hydroxymethylidyne (*COH) and formyl (*CHO) at –0.9 V vs the RHE. In contrast, semilocal DFT approximations predict a strong preference for *COH. With increasing applied potential, the dominance of *COH (formed via potential-independent surface *H transfer) diminishes, switching to the competitive formation of both *CHO and *COH (both formed via potential-dependent PCET). Furthermore, our results also demonstrate the importance of including explicitly modeled solvent molecules in predicting electron-transfer barriers and reveal the pitfalls of overreliance on simple surface *H transfer models of reduction reactions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Single Iridium Atom Doped Ni 2 P Catalyst for Optimal Oxygen Evolution

Single-atom catalysts (SACs) with 100% active sites have excellent prospects for application in the oxygen evolution reaction (OER). However, further enhancement of the catalytic activity for OER is quite challenging, particularly for the development of stable SACs with overpotentials <180 mV. Here, we report an iridium single atom on Ni 2 P catalyst (Ir SA -Ni 2 P) with a record low overpotential of 149 mV at a current density of 10 mA·cm –2 in 1.0 M KOH. The Ir SA -Ni 2 P catalyst delivers a current density up to ∼28-fold higher than that of the widely used IrO 2 at 1.53 V vs RHE. Both the experimental results and computational simulations indicate that Ir single atoms preferentially occupy Ni sites on the top surface. The reconstructed Ir–O–P/Ni–O–P bonding environment plays a vital role for optimal adsorption and desorption of the OER intermediate species, which leads to marked enhancement of the OER activity. Additionally, the dynamic “top-down” evolution of the specific structure of the Ni@Ir particles is responsible for the robust single-atom structure and, thus, the stability property. In conclusion, this Ir SA -Ni 2 P catalyst offers novel prospects for simplifying decoration strategies and further enhancing OER performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photoelectrochemical CO 2 Reduction toward Multicarbon Products with Silicon Nanowire Photocathodes Interfaced with Copper Nanoparticles

The development of photoelectrochemical systems for converting CO 2 into chemical feedstocks offers an attractive strategy for clean energy storage by directly utilizing solar energy, but selectivity and stability for these systems have thus been limited. Here, we interface silicon nanowire (SiNW) photocathodes with a copper nanoparticle (CuNP) ensemble to drive efficient photoelectrochemical CO 2 conversion to multicarbon products. This integrated system enables CO 2 -to-C 2 H 4 conversion with faradaic efficiency approaching 25% and partial current densities above 2.5 mA/cm 2 at -0.50 V vs RHE, while the nanowire photocathodes deliver 350 mV of photovoltage under 1 sun illumination. Under 50 h of continual bias and illumination, CuNP/SiNW can sustain stable photoelectrochemical CO 2 reduction. In conclusion, these results demonstrate the nanowire/catalyst system as a powerful modular platform to achieve stable photoelectrochemical CO 2 reduction and the feasibility to facilitate complex reactions toward multicarbons using generated photocarriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding the Stability of Manganese Chromium Antimonate Electrocatalysts through Multimodal In Situ and Operando Measurements

Herein, we utilize an on-line electrochemical flow cell coupled with an inductively coupled plasma-mass spectrometer (ICP-MS) to characterize the impact of composition and reactant gas on the multielement dissolution of Mn(-Cr)-Sb-O electrocatalysts. Compared to Mn 2 O 3 and Cr 2 O 3 oxides, we find that the antimonate framework stabilizes Mn at OER potentials and Cr at both ORR and OER potentials. Furthermore, dissolution of Mn and Cr from Mn(-Cr)-Sb-O is found to be driven by ORR reaction rate, with minimal dissolution under N 2 . We observe preferential dissolution of Cr totaling 13% over 10 minutes at 0.3, 0.6, and 0.9 V vs RHE, with only 1.5% loss of Mn, indicating an enrichment of Mn at the surface of the particles. Despite this asymmetric dissolution, in situ X-ray absorption spectroscopy (XAS) showed no measurable changes in the Mn K-edge at comparable potentials. This lack of change could suggest that modification to the Mn oxidation state in the surface layer is too small or that layer is too thin to be measured with the bulk XAS measurement. Lastly, on-line ICP-MS was used to assess the effects of applied potential, scan rate, and current of Mn-Cr-Sb-O during cyclic voltammetry and accelerated stress tests. With this deeper understanding of the interplay between oxygen reduction and dissolution, testing procedures were identified to maximize both activity and stability. This work highlights the use of multi-modal in situ characterization techniques in tandem to build a more complete model of stability and develop protocols for optimizing catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bonds over Electrons: Proton Coupled Electron Transfer at Solid–Solution Interfaces

This Perspective argues that most redox reactions of materials at an interface with a protic solution involve net proton-coupled electron transfer (PCET) (or other cation-coupled ET). This view contrasts with the traditional electron-transferfocused view of redox reactions at semiconductors, but redox processes at metal surfaces are often described as PCET. Taking a thermodynamic perspective, transfer of an electron is typically accompanied by a stoichiometric proton, much as the chemistry of lithium-ion batteries involves coupled transfers of e – and Li + . The PCET viewpoint implicates the surface–H bond dissociation free energy (BDFE) as the preeminent energetic parameter and its conceptual equivalents, the electrochemical ne – /nH + potential versus the reversible hydrogen electrode (RHE) and the free energy of hydrogenation, ΔG° H . These parameters capture the thermochemistry of PCET at interfaces better than electronic parameters such as Fermi energies, electron chemical potentials, flatband potentials, or band-edge energies. A unified picture of PCET at metal and semiconductor surfaces is presented. Exceptions, limitations, implications, and future directions motivated by this approach are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ferroelectric Polarization in BaTiO 3 Nanocrystals Controls Photoelectrochemical Water Oxidation and Photocatalytic Hydrogen Evolution

Ferroelectric (FE) semiconductors such as BaTiO 3 support a remnant polarization after the application of an electric field that can promote the separation of photogenerated charge carriers. Here, we demonstrate FE-enhanced photocatalytic hydrogen evolution and photoelectrochemical water oxidation with barium titanate nanocrystals for the first time. Nanocrystals of the ferroelectric tetragonal structure type were obtained by a hydrothermal synthesis from TiO 2 and barium hydroxide in 63% yield. BaTiO 3 nanocrystal films on tantalum substrates exhibit water oxidation photocurrents of 0.141 mA cm –2 at 1.23 V RHE under UV light (60 mW cm –2 ) illumination. Electric polarization at 52.8 kV cm –1 normal to the film plane increases the photocurrent by a factor of 2 or decreases it by a factor of 3.5, depending on the field polarity. It also shifts the onset potential by –0.15 or +0.09 V and it modifies the surface photovoltage signal. Lastly, exposure to an electric field increases the H 2 evolution rate of Pt/BaTiO 3 by a factor of ~1.5, and it raises the selectivity of photodeposition of silver onto the (001) facets of the nanocrystal. All FE enhancements can be removed by heating samples above the Curie temperature of BaTiO 3 . Furthermore, these findings can be explained by FE dipole-induced changes to the potential drop across the space charge layer of the material. The ability to use the ferroelectric effect to enhance hydrogen evolution and water oxidation is of potential interest for the development of improved solar energy for fuel conversion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Well-Defined Iron Sites in Crystalline Carbon Nitride

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C 6 N 9 H 2 Fe 0.4 Li 1.2 Cl, abbreviated PTI/FeCl 2 ) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl 2 /KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. As a result, the material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm –2 h –1 and Faradaic efficiency of ca. 80% at −0.80 V vs RHE.

Anions↗
DOE OSTI2023

Enhanced CO 2 Reactive Capture and Conversion Using Aminothiolate Ligand–Metal Interface

Metallic catalyst modification by organic ligands is an emerging catalyst design in enhancing the activity and selectivity of electrocatalytic carbon dioxide (CO 2 ) reactive capture and reduction to value-added fuels. However, a lack of fundamental science on how these ligand–metal interfaces interact with CO 2 and key intermediates under working conditions has resulted in a trial-and-error approach for experimental designs. With the aid of density functional theory calculations, we provided a comprehensive mechanism study of CO 2 reduction to multicarbon products over aminothiolate-coated copper (Cu) catalysts. Our results indicate that the CO 2 reduction performance was closely related to the alkyl chain length, ligand coverage, ligand configuration, and Cu facet. The aminothiolate ligand–Cu interface significantly promoted initial CO 2 activation and lowered the activation barrier of carbon–carbon coupling through the organic (nitrogen (N)) and inorganic (Cu) interfacial active sites. Experimentally, the selectivity and partial current density of the multicarbon products over aminothiolate-coated Cu increased by 1.5-fold and 2-fold, respectively, as compared to the pristine Cu at –1.16 V RHE , consistent with our theoretical findings. Furthermore, this work highlights the promising strategy of designing the ligand–metal interface for CO 2 reactive capture and conversion to multicarbon products.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Infrared Spectroscopic Observation of Oxo- and Superoxo-Intermediates in the Water Oxidation Cycle of a Molecular Ir Catalyst

Molecular Ir catalysts have emerged as an important class of model catalysts for understanding structure–activity relationships in water oxidation, a reaction that is central to renewable fuel synthesis. Prior efforts have mostly focused on controlling and elucidating the emergence of active species from prepared precursors. However, the development of efficient and stable molecular Ir catalysts also necessitates probing of reaction intermediates. To date, relatively little is known about the key intermediates in the cycles of the molecular Ir catalysts. Herein, we probed the catalytic cycle of a homogeneous Ir catalyst (“blue dimer”) at a Au electrode/aqueous electrolyte interface by combining surface-enhanced infrared absorption spectroscopy (SEIRAS) with phase-sensitive detection (PSD). Cyclic voltammograms (CVs) from 1.4 to 1.7 VRHE (RHE = reversible hydrogen electrode) give rise to a band at ~818 cm –1 , whereas CVs from 1.4 to ≥1.85 VRHE generate an additional band at ~1146 cm –1 . Isotope labeling experiments indicate that the bands at ~818 and ~1146 cm –1 are attributable to oxo (Ir V =O) and superoxo (Ir IV –OO • ) moieties, respectively. Furthermore, this study establishes PSD-SEIRAS as a sensitive tool for probing water oxidation cycles at electrode/electrolyte interfaces and demonstrates that the relative abundance of two key intermediates can be tuned by the thermodynamic driving force of the reaction.

25 ENERGY STORAGE↗
DOE OSTI2024

Atomically Dispersed Zn/Co–N–C as ORR Electrocatalysts for Alkaline Fuel Cells

Hydrogen fuel cells have drawn increasing attention as one of the most promising next-generation power sources for future automotive transportation. Developing efficient, durable, and low-cost electrocatalysts, to accelerate the sluggish oxygen reduction reaction (ORR) kinetics, is urgently needed to advance fuel cell technologies. Herein, we report on metal–organic frameworks-derived nonprecious dual metal single-atom catalysts (SACs) (Zn/Co–N–C), consisting of Co–N 4 and Zn–N 4 local structures. These catalysts exhibited superior ORR activity with a half-wave potential (E 1/2 ) of 0.938 V versus RHE (reversible hydrogen electrode) and robust stability (ΔE 1/2 = –8.5 mV) after 50k electrochemical cycles. Moreover, this remarkable performance was validated under realistic fuel cell working conditions, achieving a record-high peak power density of ~1 W cm –2 among the reported SACs for alkaline fuel cells. Operando X-ray absorption spectroscopy was conducted to identify the active sites and reveal catalytic mechanistic insights. The results indicated that the Co atom in the Co–N 4 structure was the main catalytically active center, where one axial oxygenated species binds to form an O ads –Co–N 4 moiety during the ORR. In addition, theoretical studies, based on a potential-dependent microkinetic model and core-level shift calculations, showed good agreement with the experimental results and provided insights into the bonding of oxygen species on Co–N 4 centers during the ORR. Furthermore, this work provides a comprehensive mechanistic understanding of the active sites in the Zn/Co–N–C catalysts and will pave the way for the future design and advancement of high-performance single-site electrocatalysts for fuel cells and other energy applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Photoelectrochemical Proton-Coupled Electron Transfer of TiO 2 Thin Films on Silicon

TiO 2 thin films are often used as protective layers on semiconductors for applications in photovoltaics, molecule–semiconductor hybrid photoelectrodes, and more. Experiments reported here show that TiO 2 thin films on silicon are electrochemically and photoelectrochemically reduced in buffered acetonitrile at potentials relevant to photoelectrocatalysis of CO 2 reduction, N 2 reduction, and H 2 evolution. On both n-type Si and irradiated p-type Si, TiO 2 reduction is proton-coupled with a 1e – :1H + stoichiometry, as demonstrated by the Nernstian dependence of the Ti 4+/3+ E 1/2 on the buffer pK a . Experiments were conducted with and without illumination, and a photovoltage of ∼0.6 V was observed across 20 orders of magnitude in proton activity. The 4 nm films are almost stoichiometrically reduced under mild conditions. The reduced films catalytically transfer protons and electrons to hydrogen atom acceptors, based on cyclic voltammogram, bulk electrolysis, and other mechanistic evidence. TiO 2 /Si thus has the potential to photoelectrochemically generate high-energy H atom carriers. Characterization of the TiO 2 films after reduction reveals restructuring with the formation of islands, rendering TiO 2 films as a potentially poor choice as protecting films or catalyst supports under reducing and protic conditions. Altogether, this work demonstrates that atomic layer deposition TiO 2 films on silicon photoelectrodes undergo both chemical and morphological changes upon application of potentials only modestly negative of RHE in these media. While the results should serve as a cautionary tale for researchers aiming to immobilize molecular monolayers on “protective” metal oxides, the robust proton-coupled electron transfer reactivity of the films introduces opportunities for the photoelectrochemical generation of reactive charge-carrying mediators.

Electrodes↗