SEARCH · Engineering Papers

Results for “RECONNAISSANCE SPACECRAFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS2013

The Gravity Recovery and Interior Laboratory Mission

The Gravity Recovery and Interior Laboratory (GRAIL) mission, launched in September 2011, successfully completed its Primary Science Mission in June 2012 and is currently in Extended Mission operations. Competitively selected under a NASA Announcement of Opportunity in December 2007, GRAIL is a Discovery Program mission subject to a mandatory project cost cap. The purpose of the mission is to precisely map the gravitational field of the Moon to reveal its internal structure from crust to core, determine its thermal evolution, and extend this knowledge to other planets. The mission uses twin spacecraft flying in tandem to provide the gravity map. The GRAIL Flight System, consisting of the spacecraft and payload, was developed based on significant heritage from previous missions such an experimental U.S. Air Force satellite, the Mars Reconnaissance Orbiter (MRO) mission, and the Gravity Recovery and Climate Experiment (GRACE) mission. The Mission Operations System (MOS) was based on high-heritage multimission operations developed by NASA's Jet Propulsion Laboratory and Lockheed Martin. Both the Flight System and MOS were adapted to meet the unique challenges posed by the GRAIL mission design. This paper summarizes the implementation challenges and accomplishments of getting GRAIL ready for launch. It also discusses the in-flight challenges and experiences of operating two spacecraft, and mission results.

GRAIL↗

NASA NTRS2022

Astrodynamics Convention and Modeling Reference for Lunar, Cislunar, and Libration Point Orbits

The purpose and direction of this document is to provide U.S. government agencies, specifically National Aeronautics and Space Administration (NASA) and Department of Defense (DoD) space related centers, with a foundational summary of astrodynamics concepts for trajectory design, navigation, and operations in the cislunar, lunar, and libration point regions. This document is provided in response to an Interagency Agreement (IAA) between NASA and the National Geospatial-Intelligence Agency (NGA). With applications to these regions of the Earth-Moon system, this document summarizes: the definitions of standard and unique coordinate systems for Positioning, Navigation, Timing and targeting (PNT), transformations between those coordinate frames, definitions of common time systems, a description of numerical integration, description of a widely-used and approximate dynamical model of a three-body system for preliminary analysis and nomenclature definition, description of higher-fidelity models of cislunar space, and the application of these concepts to sample scenarios with a focus on common steps in trajectory and maneuver design for a spacecraft in cislunar space. This information is critical to mission design and navigation far above the geosynchronous orbit region, where lunar perturbations are required to be modeled accurately and consistently but render trajectory design and analysis a complex procedure. Software tools such as the Goddard Space Flight Center (GSFC) open source General Mission Analysis Tool (GMAT) is used as a reference, along with a wide variety of resources constructed by NASA and other government agencies, academia, and industry, for mathematical specifications and practical considerations. This document has been prepared by and under the auspices of NASA. The GSFC Mission Engineering and Systems Analysis (MESA) Division (Code 590) and the Navigation and Mission Design Branch (Code 595) are part of NASA. Their engineers and scientists have expertise in lunar, cislunar, and libration point region trajectory guidance and navigation and timing. NASA GSFC has supported many successful lunar and cislunar missions over the past several decades. These missions include the Lunar Reconnaissance Orbiter (LRO), the two Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon’s Interaction with the Sun (ARTEMIS) spacecraft, Transiting Exoplanet Survey Satellite (TESS), Lunar Prospector, Lunar Crater Observation and Sensing Satellite (LCROSS), Clementine, and several Sun-Earth libration point missions such as WIND and Deep Space Climate Observatory (DSCOVR), dating back four decades. NASA GSFC also supports the upcoming Gateway lunar mission, the Artemis Lunar Program and Human Landing Systems, and leads both the Lunar IceCube low thrust mission and concept design for the Lunar Communication Relay and Navigation System (LCRNS).

Lunar, CisLunar, Libration, trajectory dynamics, p↗

NASA NTRS2008

Proven and Robust Ground Support Systems - GSFC Success and Lessons Learned

Over the past fifteen years, Goddard Space Flight Center has developed several successful science missions in-house: the Wilkinson Microwave Anisotropy Probe (WMAP), the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE), the Earth Observing 1 (EO-1) [1], and the Space Technology 5 (ST-5)[2] missions, several Small Explorers, and several balloon missions. Currently in development are the Solar Dynamics Observatory (SDO) [3] and the Lunar Reconnaissance Orbiter (LRO)[4]. What is not well known is that these missions have been supported during spacecraft and/or instrument integration and test, flight software development, and mission operations by two in house satellite Telemetry and Command (T & C) Systems, the Integrated Test and Operations System (ITOS) and the Advanced Spacecraft Integration and System Test (ASIST). The advantages of an in-house satellite Telemetry and Command system are primarily in the flexibility of management and maintenance - the developers are considered a part of the mission team, get involved early in the development process of the spacecraft and mission operations-control center, and provide on-site, on-call support that goes beyond Help Desk and simple software fixes. On the other hand, care must be taken to ensure that the system remains generic enough for cost effective re-use from one mission to the next. The software is designed such that many features are user-configurable. Where user-configurable options were impractical, features were designed so as to be easy for the development team to modify. Adding support for a new ground message header, for example, is a one-day effort because of the software framework on which that code rests. This paper will discuss the many features of the Goddard satellite Telemetry and Command systems that have contributed to the success of the missions listed above. These features include flexible user interfaces, distributed parallel commanding and telemetry decommutation, a procedure language, the interfaces and tools needed for a high degree of automation, and instantly accessible archives of spacecraft telemetry. It will discuss some of the problems overcome during development, including secure commanding over networks or the Internet, constellation support for the three satellites that comprise the ST-5 mission, and geographically distributed telemetry end users.

Pfarr, Barbara↗

NASA NTRS2017

The Intelligent Landing System for Safe and Precise Landing on Europa

Europa, the smallest of Jupiter’s Galilean moons, is thought to harbor a vast liquid water ocean beneath its icy crust, making it one of the most scientifically intriguing targets for a robotic surface sampling mission in our Solar System. However, autonomously landing a spacecraft safely and precisely on Europa poses unique challenges, such as very little existing high-resolution reconnaissance imagery, a surface expected to be very rough and hazardous over a wide range of scales, an extremely intense ionizing radiation environment, and very limited lander resources for mass and volume. To address these challenges, we propose a novel Intelligent Landing System (ILS) combining four Guidance, Navigation & Control (GN&C) sensing functions – velocimetry, altimetry, map-relative localization, and hazard detection – that would together enable safe and precise landing on Europa’s surface. The ILS is a smart sensor system, combining an inertial measurement unit (IMU), a monocular, passive-optical camera, and a light detection and ranging (Li-DAR) sensor with dedicated computing resources as well as an onboard 3D terrain map. The ILS leverages more than a decade of technology development from programs such as the Lander Vision System, currently baselined on the Mars 2020 mission. This paper provides a detailed description of the proposed ILS architecture and concept of operations, as well as select preliminary simulation results to assess performance and robustness.

Trawny, Nikolas↗

NASA NTRS2021

Mars 2020 Perseverance trajectory reconstruction and performance from launch through landing

The Mars 2020 (M2020) Mission carrying Perseverance, the most advanced rover ever sent to Mars, successfully launched on an Atlas V 541 (AV-088) launch vehicle from the Eastern Test Range (ETR) at Cape Canaveral Air Force Station (CCAFS) in Florida at 11:50:00 UTC (T-Zero time) on July 30, 2020. After some station reconfiguration, carrier/telemetry were locked at both Deep Space Network (DSN) Canberra and Goldstone stations. Perseverance entered the Martian atmosphere at 20:36:50 Spacecraft Event Time (SCET) UTC, and landed inside Jezero Crater at 20:43:49 SCET UTC on February 18, 2021. Confirmation of nominal landing was received at the DSN Goldstone and Madrid tracking stations via the Mars Reconnaissance Orbiter at 20:55:11 Earth Received Time (ERT) UTC. This paper summarizes in detail the actual vs. predicted performance in terms of launch vehicle events, launch vehicle injection performance, actual DSN spacecraft lockup, trajectory correction maneuver performance, Entry, Descent, and Landing events, and overall trajectory and geometric characteristics.

Abilleira, Fernando↗

NASA NTRS2021

Mars 2020 Perseverance Trajectory Reconstruction and Performance from Launch through Landing

Wong, Mau↗

NASA NTRS2005

Sherpa moving mass entry descent landing system

We describe Sherpa - a Strap-on High-altitude Entry Reconnaissance and Precision Aeromaneuver system that utilizes a moving mass system within an entry capsule to land a spacecraft precisely onto the surface of Mars.

entry descent landing↗

NASA NTRS2007

Thermal Modeling of the Mars Reconnaissance Orbiter's Solar Panel and Instruments during Aerobraking

The Mars Reconnaissance Orbiter (MRO) launched on August 12, 2005 and started aerobraking at Mars in March 2006. During the spacecraft s design phase, thermal models of the solar panels and instruments were developed to determine which components would be the most limiting thermally during aerobraking. Having determined the most limiting components, thermal limits in terms of heat rate were established. Advanced thermal modeling techniques were developed utilizing Thermal Desktop and Patran Thermal. Heat transfer coefficients were calculated using a Direct Simulation Monte Carlo technique. Analysis established that the solar panels were the most limiting components during the aerobraking phase of the mission.

Dec, John A.↗

NASA NTRS2010

Space-Qualified Traveling-Wave Tube

The L-3 Communications Electron Technologies, Inc. Model 999HA traveling-wave tube (TWT), was developed for use as a high-power microwave amplifier for high-rate transmission of data and video signals from deep space to Earth (see figure). The 999HA is a successor to the 999H a non-space qualified TWT described in High-Power, High-Efficiency Ka-Band Traveling-Wave Tube (LEW-17900-1), NASA Tech Briefs, Vol. 31, No. 2 (February 2007), page 32. Operating in the 31.8-to-32.3 GHz frequency band, the 999HA has been shown to generate 252 W of continuous- wave output power at 62 percent overall power efficiency a 75-percent increase in output power over the 999H. The mass of the 999HA is 35 percent less than that of the 999H. Moreover, taking account of the elimination of a Faraday cage that is necessary for operation of the 999H but is obviated by a redesign of high-voltage feed-throughs for the 999HA, the overall reduction in mass becomes 57 percent with an 82 percent reduction in volume. Through a series of rigorous tests, the 999HA has been qualified for operation aboard spacecraft with a lifetime exceeding seven years. Offspring of the 999HA will fly on the Kepler and Lunar Reconnaissance Orbiter missions.

Wilson, Jeffrey D.↗

NASA NTRS2018

Enhanced Stationkeeping Maneuver Control Technique for Delta-V Cost Reduction in the Korea Pathfinder Lunar Orbiter

Final document is attached. This paper proposes an enhanced control technique for stationkeeping maneuvers to reduce delta-v costs for the Korea Pathfinder Lunar Orbiter (KPLO). A scheduled circularization control technique exploits patterns in the evolution of the line of apsides and eccentricity to achieve a significant reduction in stationkeeping delta-v costs based on spacecraft requirements. The technique is compared against previous algorithms implemented for maneuver operations of the Lunar Prospector and Lunar Reconnaissance Orbiter (LRO) missions in the USA and KAGUYA in Japan. Through Monte Carlo analysis, the efficacy and robustness of the proposed method are verified, and the technique is shown to meet the operational requirements of KPLO.

Davis, Diane C.↗

NASA NTRSDate not supplied

Control of the Lunar Reconnaissance Orbiter Reaction Wheel Angular Momentum Using Attitude Slews

The Lunar Reconnaissance Orbiter (LRO) makes use of four Reaction Wheel Assemblies (RWA) for the purpose of adjusting and maintaining the spacecraft attitude. Reduction of RWA angular momentum through the use of propulsive momentum unloads is the principal source of fuel use. Nominally, LRO maintains a nadir orientation but frequently slews off-nadir for science observations. Off-nadir attitude slews can reduce RWA angular momentum by changing the direction of the external torques in the spacecraft body frame. Control of RWA angular momentum using momentum attitude slews has the potential to significantly reduce fuel expenditure. The momentum slew planning process requires careful evaluation of spacecraft constraints, ground constraints, and science observations. Momentum slews are projected to extend LRO fuel lifetime by several years.

Operations↗

NASA NTRS2003

Mars Reconnaissance Orbiter design approach for high-resolution surface imaging

One of the objectives of the MRO mission is to use the High-Resolution Imaging Science Experiment (HiRISE) to provide 50 cm/pixel images of future Mars landing sites. To achieve such detail, MRO must meet some very challenging target-relative pointing and pointing stability requirements. A combination of analysis, operational constraints, and spacecraft design modifications were utilized to ensure that the necessary pointing requirements will be met.

Mars↗

NASA NTRS1973

The Viking Mission

The Viking Mission is a scientific exploration of the planet Mars with particular emphasis on the search for life. Two unmanned spacecraft will be launched from Cape Kennedy in 1975 and will arrive at Mars in the summer of 1976. Each spacecraft will consist of an orbiter and lander. The landing sites will be preselected before launch and certified by orbital reconnaissance before landing. Soft landing on the surface will be accomplished by decelerating first on an aeroshell, then a deployed parachute and finally using terminal propulsion engines. Thirteen investigations will be performed, including mapping experiments from the orbiter, and analytical experiments on the surface which deal broadly with the biology, geosciences and atmospheric characteristics of the planet.

Martin, J. S., Jr.↗

NASA NTRS1973

Mars exploration with Viking

Martin, J. S., Jr.↗

NASA NTRS1981

Status and future of extraterrestrial mapping programs

Extensive mapping programs have been completed for the Earth's Moon and for the planet Mercury. Mars, Venus, and the Galilean satellites of Jupiter (Io, Europa, Ganymede, and Callisto), are currently being mapped. The two Voyager spacecraft are expected to return data from which maps can be made of as many as six of the satellites of Saturn and two or more of the satellites of Uranus. The standard reconnaissance mapping scales used for the planets are 1:25,000,000 and 1:5,000,000; where resolution of data warrants, maps are compiled at the larger scales of 1:2,000,000, 1:1,000,000 and 1:250,000. Planimetric maps of a particular planet are compiled first. The first spacecraft to visit a planet is not designed to return data from which elevations can be determined. As exploration becomes more intensive, more sophisticated missions return photogrammetric and other data to permit compilation of contour maps.

Batson, R. M.↗

NASA NTRS2017

Spacecraft Mission Design for the Mitigation of the 2017 PDC Hypothetical Asteroid Threat

This paper presents a detailed mission design analysis results for the 2017 Planetary Defense Conference (PDC) Hypothetical Asteroid Impact Scenario, documented at https://cneos.jpl.nasa.gov/ pd/cs/pdc17/. The mission design includes campaigns for both reconnaissance (flyby or rendezvous) of the asteroid (to characterize it and the nature of the threat it poses to Earth) and mitigation of the asteroid, via kinetic impactor deflection, nuclear explosive device (NED) deflection, or NED disruption. Relevant scenario parameters are varied to assess the sensitivity of the design outcome, such as asteroid bulk density, asteroid diameter, momentum enhancement factor, spacecraft launch vehicle, and mitigation system type. Different trajectory types are evaluated in the mission design process from purely ballistic to those involving optimal midcourse maneuvers, planetary gravity assists, and/or lowthrust solar electric propulsion. The trajectory optimization is targeted around peak deflection points that were found through a novel linear numerical technique method. The optimization process includes constrain parameters, such as Earth departure date, launch declination, spacecraft/asteroid relative velocity and solar phase angle, spacecraft dry mass, minimum/maximum spacecraft distances from Sun and Earth, and Earth/spacecraft communications line of sight. Results show that one of the best options for the 2017 PDC deflection is solar electric propelled rendezvous mission with a single spacecraft using NED for the deflection

Barbee, Brent W.↗

NASA NTRS2017

Spacecraft Mission Design for the Mitigation of the 2017 PDC Hypothetical Asteroid Threat

This paper presents a detailed mission design analysis results for the 2017 Planetary Defense Conference (PDC) Hypothetical Asteroid Impact Scenario, documented at https:cneos.jpl.nasa.govpdcspdc17. The mission design includes campaigns for both reconnaissance (flyby or rendezvous) of the asteroid (to characterize it and the nature of the threat it poses to Earth) and mitigation of the asteroid, via kinetic impactor deflection, nuclear explosive device (NED) deflection, or NED disruption. Relevant scenario parameters are varied to assess the sensitivity of the design outcome, such as asteroid bulk density, asteroid diameter, momentum enhancement factor, spacecraft launch vehicle, and mitigation system type. Different trajectory types are evaluated in the mission design process from purely ballistic to those involving optimal midcourse maneuvers, planetary gravity assists, and/or low-thrust solar electric propulsion. The trajectory optimization is targeted around peak deflection points that were found through a novel linear numerical technique method. The optimization process includes constrain parameters, such as Earth departure date, launch declination, spacecraft, asteroid relative velocity and solar phase angle, spacecraft dry mass, minimum/maximum spacecraft distances from Sun and Earth, and Earth-spacecraft communications line of sight. Results show that one of the best options for the 2017 PDC deflection is solar electric propelled rendezvous mission with a single spacecraft using NED for the deflection.

Barbee, Brent W.↗

NASA NTRS1999

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near-Earth asteroid (NEA) population is thought to contain approximately 1500 objects as large as a kilometer, approximately 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗