Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION HARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

On the radiation hardness of (Mg,Zn)O thin films grown by pulsed-laser deposition

We report on electrical properties and the generation of the E4 defect in pulsed-laser deposited Mg{sub x}Zn{sub 1-x}O thin films irradiated with 2.25 MeV protons. Whereas the electrical properties of the Schottky diodes as well as the net doping density of the samples did not change due to irradiation, the concentration of the E4 defect increased proportional to the applied dose as revealed by deep level transient spectroscopy. The generation rate {eta}, is for binary ZnO thin films about 40 cm{sup -1}, a factor of 3 higher than in melt-grown single crystals, and increases to about 100 cm{sup -1} for the Mg-alloyed thin films.

36 MATERIALS SCIENCE↗

Radiation hardness of graphene and MoS{sub 2} field effect devices against swift heavy ion irradiation

We have investigated the deterioration of field effect transistors based on two-dimensional materials due to irradiation with swift heavy ions. Devices were prepared with exfoliated single layers of MoS{sub 2} and graphene, respectively. They were characterized before and after irradiation with 1.14 GeV U{sup 28+} ions using three different fluences. By electrical characterization, atomic force microscopy, and Raman spectroscopy, we show that the irradiation leads to significant changes of structural and electrical properties. At the highest fluence of 4 Multiplication-Sign 10{sup 11} ions/cm{sup 2}, the MoS{sub 2} transistor is destroyed, while the graphene based device remains operational, albeit with an inferior performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Radiation Hard Multi-Channel Digitizer ASIC for Operation in the Harsh Jovian Environment

In 1995, the Galileo spacecraft arrived at Jupiter to conduct follow-up experiments on pathfinder Pioneer and key Voyager discoveries especially at Io, Europa, Ganymede and Callisto. These new observations helped expand our scientific knowledge of the prominent Galilean satellites; studies revealed diversity with respect to their geology, internal structure, evolution and degree of past and present activity. Jupiter's diverse Galilean satellites, of which three are believed to harbor internal oceans, are central to understanding the habitability of icy worlds. Galileo provided for the first time compelling evidence of a near-surface global ocean on Europa. Furthermore, by understanding the Jupiter system and unraveling the history of its evolution from initial formation to the emergence of possible habitats and life, gives insight into how giant planets and their satellite systems form and evolve. Most important, new light is shed on the potential for the emergence and existence of life in icy satellite oceans. In 2009, NASA released a detailed Jupiter Europa Mission Study (EJSM) that proposed an ambitious Flagship Mission to understand more fully the satellites Europa and Ganymede within the context of the Jovian system. Key to EJSM is the NASA led Jupiter Europa Orbiter (JEO) and the ESA led Jupiter Ganymede Orbiter (JGO). JEO and JGO would execute a choreographed exploration of the Jovian system before settling into orbit around Europa and Ganymede, respectively. The National Academies Planetary Decadal Survey, 2011 has listed the NASA-led JEO as the second highest priority mission for the decade 2013-2022, and if chosen it would be launched in 2020 with arrival at Jupiter in 2025. If the JEO mission is not chosen it is anticipated that there will be opportunities in future decadal cycles. Jupiter Orbit Insertion (JOI) begins a 30-month Jovian system tour followed by nine months of science mapping after Europa Orbit Insertion (EOI) in July 2028. The orbiter will ultimately impact the surface of Europa after the mission is completed. The current JEO mission concept includes a range of instruments on the payload, to monitor dynamic phenomena (such as Io's volcanoes and Jupiters atmosphere), map the Jovian magnetosphere and its interactions with the Galilean satellites, and characterize water oceans beneath the ice shells of Europa and Ganymede. The payload includes a low mass (3.7 Kg) and low power (< 5 W) Thermal Instrument (TI) concept for measuring possible warm thermal anomalies on Europa s cold surface caused by recent (< 10,000 years) eruptive activity. Regions of anomalously high heat flow will be identified by thermal mapping using a nadir pointing, push-broom filter radiometer that provides far-IR imagery in two broad band spectral wavelength regions, 8-20 m and 20-100 m, for surface temperature measurements with better than a 2 K accuracy and a spatial resolution of 250 m/pixel obtained from a 100 Km orbit. The temperature accuracy permits a search for elevated temperatures when combined with albedo information. The spatial resolution is sufficient to resolve Europa's larger cracks and ridge axial valleys. In order to accomplish the thermal mapping, the TI uses sensitive thermopile arrays that are readout by a custom designed low-noise Multi-Channel Digitizer (MCD) ASIC that resides very close to the thermopile linear array outputs. Both the thermopile array and the MCD ASIC will need to show full functionality within the harsh Jovian radiation environment, operating at cryogenic temperatures, typically 150 K to 170 K. In the following, a radiation mitigation strategy together with a low risk Radiation-Hardened-By-Design (RHBD) methodology using commercial foundry processes is given for the design and manufacture of a MCD ASIC that will meet this challenge.

Aslam, Shahid↗

Refined Synthesis and Crystal Growth of Pb{sub 2}P{sub 2}Se{sub 6} for Hard Radiation Detectors.

The refined synthesis and optimized crystal growth of high quality Pb2P2Se6 single crystals are reported. Improved experimental procedures were implemented to reduce the oxygen contamination and improve the stoichiometry of the single crystal samples. The impact of oxygen contamination and the nature of the stoichiometry deviation in the Pb2P2Se6 system were studied by first-principles density functional theory (DFT) electronic structure calculations as well as experimental methods. The DFT calculations indicated that the presence of interstitial oxygen atoms (O-int) leads to the formation of a deep level located near the middle of the gap, as well as a shallow acceptor level near the valence band maximum. In addition, total energy calculations of the heat of formation of Pb2P2Se6 suggest that the region of thermodynamic stability is sufficiently wide. By refining the preparative procedures, high quality Pb2P2Se6 single crystal samples were reproducibly obtained. These Pb2P2Se6 single crystals exhibited excellent optical transparency, electrical resistivity in the range of 10(11) Omega.cm, and a significant increase in photoconductivity. Infrared photoluminescence of the Pb2P2Se6 single crystals was observed over the temperature range of 15-75 K. Detectors fabricated from boules yielded a clear spectroscopic response to both Ag K alpha X-ray and Co-57 gamma-ray radiation. The electron and hole mobility lifetime product (mu tau) of the current Pb2P2Se6 detectors were estimated to be 3.1 x 10(-4) and 4.8 X 10(-5) cm(2)/V, respectively.

Wang, Peng L.↗

Controlling the Vapor Transport Crystal Growth of Hg 3 Se 2 I 2 Hard Radiation Detector Using Organic Polymer

The chalcohalide compound Hg 3 Se 2 I 2 with a defect anti-perovskite structure has been demonstrated to be a promising semiconductor for room temperature X- and gamma-ray detection. In this work, we use transport agents during the vapor growth of Hg 3 Se 2 I 2 crystals under gradient temperature profiles to dramatically improve the size and yield of Hg 3 Se 2 I 2 single crystals. Various growth conditions with combinations of organic polymer (polyethylene) with elemental Hg, Se, or 12 are compared. The largest single crystals (with size up to 7 x 5 x 3.5 mm 3 ) were obtained using both polyethylene and excess I-2 as the transport agents. The as-prepared detector devices based on these crystals have excellent photo response to a series of radiation sources, including low flux X-ray source, alpha particles, and gamma-rays. The X-ray induced photocurrent of Hg 3 Se 2 I 2 detectors is 3 orders of magnitude higher than the dark current, indicating excellent X-ray photosensitivity. Under Am-241 alpha particle source (5.5 MeV), the best energy resolution obtained is similar to 8.1%. The Hg 3 Se 2 I 2 device also shows improved detector performance under Co-57 and Cs-137 gamma-ray sources. The improved crystal growth and detector performance using this polymer additive during the vapor transport process further confirms the great potential for the development of Hg 3 Se 2 I 2 for radiation detection.

36 MATERIALS SCIENCE↗

Metal Halide Perovskites Demonstrate Radiation Hardness and Defect Healing in Vacuum

Herein, we subject formamidinium lead iodide films to oxygen-containing gases (flowing O 2 or free diffusion of lab atmosphere), inert gases (flowing He, Ar, or N 2 ), and vacuum. Our films are irradiated by Cu Ka X-rays and held at 75 °C while X-ray diffraction is recorded. Under all gas conditions, we observe a reproducible 1.1 ± 0.5 A 3 perovskite lattice contraction from an initial unit cell volume of 256.5 ± 0.8 A 3 concurrent with continuous perovskite loss and lead iodide growth. Oxygen-containing gases increase the reaction rates without materially altering perovskite structural changes. Under the same temperature and irradiation conditions in vacuo, a self-healing reaction is observed, exhibited by a reproducible (0.9 ± 0.3 A 3 ) lattice expansion and stabilization of the perovskite. Furthermore, interactions between the perovskite, defects, and minority phases are simulated by generalized gradient approximation Perdew-Burke-Ernzerhof (GGA-PBE) density functional theory. Lattice contraction indicates an increase in the concentration of Schottky defects-pairs of formamidinium and iodine vacancies. Under irradiation in every atmospheric condition, a solid solution of Schottky defects with a concentration of several percent diffuses and precipitates forming lead iodide and consuming the defects. In the presence of ionized gases, this framework is modified to include the continual loss of formamidinium and iodine ions from the perovskite forming Schottky defects.

14 SOLAR ENERGY↗

Investigation of Semi-Insulating Cs 2 Hg 6 S 7 and Cs 2 Hg 6-x Cd x S 7 Alloy for Hard Radiation Detection

A new method is described to synthesize the semiconductor Cs2Hg6S7 and its alloy with Cd. Using the as-synthesized material, large single crystals have been grown by the Bridgman method under an improved set of crystal growth parameters. In addition, Cd alloying in the form of Cs(2)Hg(6)xCd(x)S(7) (x = 0.25, 0.5, 0.75, etc.) as well as doping with In, Cl was investigated and the influence on the electronic properties was studied. Cd alloying increases the band gap of Cs2Hg6S7 from 1.63 to 1.84 eV. Doping with In and Cl however creates electron carriers and changes p-type samples of Cs2Hg6S7 into n type. A 30-fold increase in the resistivity of the single crystals from 2 X 10(6) to 0.65 X 10(8) Omega cm has been achieved. The carrier mobility-lifetime product of the Cs(2)Hg6S7 crystals has been increased to 1.7 X 10(-3) cm2/V for electrons (mu t)(e) and 2.4 X 10(-3) cm2/V for holes (mu t)(h) (HgCl2 doped). The measured (mu t)e value is comparable to the commercial CdZnTe crystal while the (mu t)h is 10 times higher. Detection of Ag X-ray radiation is demonstrated using the as-grown Cs2Hg6S7 crystals.

Li, Hao↗