Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Influence of the Si3N4 microstructure on its R-curve and fatigue behavior

The R-curve and fatigue behavior of a silicon nitride with large, highly elongated grains were compared to those of a silicon nitride with smaller, more equiaxed grains. The former was found to have higher toughness and a slightly rising R-curve which enhanced fatigue resistance, while the latter had constant toughness with crack length. The R-curve was attributed to crack deflection and grain pull-out. The microstructure did not influence the dynamic fatigue properties of the two ceramics, as both had good resistance to dynamic fatigue. The cyclic fatigue resistance of the large-grained Si3N4, however, was surprisingly low.

Tikare, Veena↗
NASA NTRS2005

Pre-Launch GOES-R Risk Reduction Activities for the Geostationary Lightning Mapper

The GOES-R Geostationary Lightning Mapper (GLM) is a new instrument planned for GOES-R that will greatly improve storm hazard nowcasting and increase warning lead time day and night. Daytime detection of lightning is a particularly significant technological advance given the fact that the solar illuminated cloud-top signal can exceed the intensity of the lightning signal by a factor of one hundred. Our approach is detailed across three broad themes which include: Data Processing Algorithm Readiness, Forecast Applications, and Radiance Data Mining. These themes address how the data will be processed and distributed, and the algorithms and models for developing, producing, and using the data products. These pre-launch risk reduction activities will accelerate the operational and research use of the GLM data once GOES-R begins on-orbit operations. The GLM will provide unprecedented capabilities for tracking thunderstorms and earlier warning of impending severe and hazardous weather threats. By providing direct information on lightning initiation, propagation, extent, and rate, the GLM will also capture the updraft dynamics and life cycle of convective storms, as well as internal ice precipitation processes. The GLM provides information directly from the heart of the thunderstorm as opposed to cloud-top only. Nowcasting applications enabled by the GLM data will expedite the warning and response time of emergency management systems, improve the dispatch of electric power utility repair crews, and improve airline routing around thunderstorms thereby improving safety and efficiency, saving fuel and reducing delays. The use of GLM data will assist the Bureau of Land Management (BLM) and the Forest Service in quickly detecting lightning ground strikes that have a high probability of causing fires. Finally, GLM data will help assess the role of thunderstorms and deep convection in global climate, and will improve regional air quality and global chemistry/climate modeling. The GLM has a robust design that benefits and improves upon its strong heritage of NASA-developed LEO predecessors, the Optical Transient Detector (OTD) and the Lightning Imaging Sensor (LIS). GLM will have a substantially larger number of pixels within the focal plane, two lens systems, and multiple Real-Time Event Processors REPS for on-board event detection and data compression to provide continuous observations of the Americas and adjacent oceans.

Goodman, S. J.↗
NASA NTRS2010

The Geostationary Lighting Mapper (GLM) for GOES-R: A New Operational Capability to Improve Storm Forecasts and Warnings

The next generation Geostationary Operational Environmental Satellite (GOES-R) series is a follow on to the existing GOES system currently operating over the Western Hemisphere. Superior spacecraft and instrument technology will support expanded detection of environmental phenomena, resulting in more timely and accurate forecasts and warnings. Advancements over current GOES capabilities include a new capability for total lightning detection (cloud and cloud-to-ground flashes) from the Geostationary Lightning Mapper (GLM), and improved spectral (3x), spatial (4x), and temporal (5x) resolution for the Advanced Baseline Imager (ABI). The GLM, an optical transient detector and imager operating in the near-IR at 777.4 nm will map all (in-cloud and cloud-to-ground) lighting flashes continuously day and night with near-uniform spatial resolution of 8 km with a product refresh rate of less than 20 sec over the Americas and adjacent oceanic regions, from the west coast of Africa (GOES-E) to New Zealand (GOES-W) when the constellation is fully operational. This will aid in forecasting severe storms and tornado activity, and convective weather impacts on aviation safety and efficiency. In parallel with the instrument development (a prototype and 4 flight models), a GOES-R Risk Reduction Team and Algorithm Working Group Lightning Applications Team have begun to develop the Level 2 algorithms and applications. Proxy total lightning data from the NASA Lightning Imaging Sensor on the Tropical Rainfall Measuring Mission (TRMM) satellite and regional test beds are being used to develop the pre-launch algorithms and applications, and also improve our knowledge of thunderstorm initiation and evolution. Real time lightning mapping data are being provided in an experimental mode to selected National Weather Service (NWS) national centers and forecast offices via the GOES-R Proving Ground to help improve our understanding of the application of these data in operational settings and facilitate Day-1 user readiness for this new capability.

Goodman, Steven J.↗
NASA NTRS2015

GOES-R Dual Isolation

The Geostationary Operational Environmental Satellite-R Series (GOES-R) is the first of the next generation geostationary weather satellites, scheduled for delivery in late 2015. GOES-R represents a quantum increase in Earth and solar weather observation capabilities, with 4 times the resolution, 5 times the observation rate, and 3 times the number of spectral bands for Earth observations. With the improved resolution, comes the instrument suite's increased sensitive to disturbances over a broad spectrum 0-512 Hz. Sources of disturbance include reaction wheels, thruster firings for station keeping and momentum management, gimbal motion, and internal instrument disturbances. To minimize the impact of these disturbances, the baseline design includes an Earth Pointed Platform (EPP), a stiff optical bench to which the two nadir pointed instruments are collocated together with the Guidance Navigation & Control (GN&C) star trackers and Inertial Measurement Units (IMUs). The EPP is passively isolated from the spacecraft bus with Honeywell D-Strut isolators providing attenuation for frequencies above approximately 5 Hz in all six degrees-of-freedom. A change in Reaction Wheel Assembly (RWA) vendors occurred very late in the program. To reduce the risk of RWA disturbances impacting performance, a secondary passive isolation system manufactured by Moog CSA Engineering was incorporated under each of the six 160 Nms RWAs, tuned to provide attenuation at frequencies above approximately 50 Hz. Integrated wheel and isolator testing was performed on a Kistler table at NASA Goddard Space Flight Center. High fidelity simulations were conducted to evaluate jitter performance for four topologies: 1) hard mounted no isolation, 2) EPP isolation only, 2) RWA isolation only, and 4) dual isolation. Simulation results demonstrate excellent performance relative to the pointing stability requirements, with dual isolated Line of Sight (LOS) jitter less than 1 micron rad.

GN&C Engineering↗
NASA NTRS2019

In Situ Observation of Growth Dynamics in DECLIC Directional Solidification Insert Onboard ISS: DSI-R Flight Campaign

The study of solidification microstructure formation is of utmost importance for materials design and processing, as solid-liquid interface patterns largely govern mechanical and physical properties. Pattern selection occurs under dynamic conditions of growth in which the initial morphological instability evolves nonlinearly and undergoes a reorganization process. The dynamic and nonlinear nature of this instability renders in situ observation of the interface an invaluable tool to gain knowledge on the time-evolution of the interface pattern. Transparent organic analogs, which solidify like metallic alloys, allow direct visualization of interface dynamics. Extensive ground-based studies of both metallic and organic bulk samples have established the presence of significant convection during solidification processes that alters the formation of interfacial microstructures. A reduced-gravity environment is therefore mandatory for fluid flow elimination in bulk samples. In the framework of the CNES project MISOL3D (MIcrostrutures de SOLidification 3D) and the NASA projects DSIP (Dynamical Selection of 3D Interface Patterns), SPADES (SPAtiotemporal Evolution of three-dimensional DEndritic array Structures) and CAMUS (ComputAtional Studies of MicrostrUcture Formation During Alloy Solidification in Microgravity), we participated in the development of the Directional Solidification Insert (DSI) of the DEvice for the study of Critical Liquids and Crystallization (DECLIC). The DECLIC-DSI is dedicated to in situ and real-time characterization of solid-liquid interface patterns during directional solidification of transparent alloys in diffusive transport regime. Between April 2010 and March 2011, the first ISS campaign (DSI) explored the entire range of microstructures resulting in unprecedented observations. A second campaign (DSI-R), performed between October 2017 and December 2018, in which the insert contained an alloy of higher solute concentration, allowed to complete the benchmark database. The increase of solute concentration resulted in well-developed dendritic patterns at lower velocities (lower interface curvature and larger tip radius). The microstructure resulting from dendritic growth is dominant in metallurgy so that it is fundamental to understand the mechanisms of its formation. The main aims of this experimental campaign are to understand: the mechanisms of the cell to dendrite transition, the fundamental mechanisms of sidebranching formation, the dependence of dendrite tip shapes on growth conditions, the interaction of primary array and secondary sidebranches, and the influence of subgrain boundaries on the spatiotemporal organization of the array structure. Preparation, analysis and interpretation of the experiments performed onboard ISS are considerably enhanced by experiments performed on ground using thin-samples (Pr. Trivedi’s group) and phase-field simulations of microstructure formation in a diffuse growth regime (Pr. Karma’s group). In this summary, we will present an initial assessment of the results obtained during the DSI-R campaign. Nomenclature Vp: pulling velocity G: thermal gradient L: solidified length rtip: tip curvature radius Acronyms/Abbreviations CADMOS: Centre d'Aide au Développement des activités en Micro-pesanteur et des Opérations Spatiales CNES: Centre National d’Études Spatiales DECLIC: Device for the study of Critical LIquids and Crystallization DSI: Directional Solidification Insert DSI-R: Directional Solidification Insert - Refurbish ISS: International Space Station NASA: National Aeronautics and Space Administration PF: phase-field SCN: Succinonitrile 3D: three-dimensional

Mota, F.L.↗
NASA NTRS2022

Spatial Downscaling of GOES-R Land Surface Temperature over Urban Regions: A Case Study for New York City

The surface urban heat island (SUHI) effect is among the major environmental issues encountered in urban regions. To better predict the dynamics of the SUHI and its impacts on extreme heat events, an accurate characterization of the surface energy balance in urban regions is needed. However, the ability to improve understanding of the surface energy balance is limited by the heterogeneity of surfaces in urban areas. This study aims to enhance the understanding of the urban surface energy budget through an innovation in the use of land surface temperature (LST) observations from remote sensing satellites. A LST database with 5–min temporal and 30–m spatial resolution is developed by spatial downscaling of the Geostationary Operational Environmental Satellites—R (GOES–R) series LST product over New York City (NYC). The new downscaling method, known as the Spatial Downscaling Method (SDM), benefits from the fine spatial resolution of Landsat–8 and high temporal resolution of GOES–R, and considers the temporal variation in LST for each land cover type separately. Preliminary results show that the SDM can reproduce the temporal and spatial variability of LST over NYC reasonably well and the downscaled LST has a spatial root mean square error (RMSE) of the order of 2 K as compared to the independent Landsat–8 observations. The SDM shows smaller RMSE of 1.93 K over the tree canopy land cover, whereas RMSE is 2.19 K for built–up areas. The overall results indicate that the SDM has potential to estimate LST at finer spatial and temporal scales over urban regions.

land surface temperature↗
NASA NTRS1959

Measurements of Heat-Transfer and Friction Coefficients for Helium Flowing in a Tube at Surface Temperatures up to 5900 Deg R

Measurements of average heat transfer and friction coefficients and local heat transfer coefficients were made with helium flowing through electrically heated smooth tubes with length-diameter ratios of 60 and 92 for the following range of conditions: Average surface temperature from 1457 to 4533 R, Reynolds numbe r from 3230 to 60,000, heat flux up to 583,200 Btu per hr per ft2 of heat transfer area, and exit Mach numbe r up to 1.0. The results indicate that, in the turbulent range of Reynolds number, good correlation of the local heat transfer coefficients is obtained when the physical properties and density of helium are evaluated at the surface temperature. The average heat transfer coefficients are best correlated on the basis that the coefficient varies with [1 + (L/D))(sup -0,7)] and that the physical properties and density are evaluated at the surface temperature. The average friction coefficients for the tests with no heat addition are in complete agreement with the Karman-Nikuradse line. The average friction coefficients for heat addition are in poor agreement with the accepted line.

Taylor, Maynard F.↗
NASA NTRS1975

Variability of R CrB and NML Cyg at 3.5 microns

The 3.5-micron magnitudes of R CrB and NML Cyg as a function of Julian date (over the period 1968-1974) are presented and briefly analyzed. They establish the variability of R CrB at this wavelength: during the interval studied, its magnitude varied approximately 1.4 units, in a definite cyclic pattern. The magnitude variations of NML Cyg were smaller (about 0.5 mag), but they may be cyclic with a period on the same order as that of R CrB.

Strecker, D. W.↗
NASA NTRS1976

The economic impact of NASA R and D spending

The economic impact of R and D spending, particularly NASA R and D spending, on the U. S. economy was evaluated. The crux of the methodology and hence the results revolve around the fact that it was necessary to consider both the demand effects of increased spending and the supply effects of a higher rate of technological growth and a larger total productive capacity. The demand effects are primarily short-run in nature, while the supply effects do not begin to have a significant effect on aggregate economic activity until the fifth year after increased expenditures have taken place. The short-term economic impact of alternative levels of NASA expenditures for 1975 was first examined. The long-term economic impact of increased levels of NASA R and D spending over a sustained period was then evaluated.

Evans, M. K.↗
NASA NTRS1976

Analysis of the effectiveness of industrial R and D

The criteria used by private industry in evaluating and selecting proposed research and development projects for implementation, and also in determining which R and D facilities are to be acquired were investigated. Conceptual and practical issues inherent in any quantitative analysis of the contribution of R and D to economic growth were identified in order to assist NASA in developing approaches for analzying the economic implication of its own R and D efforts.

Fisher, W. H.↗
NASA NTRS1977

Who should conduct aeronautical R and D for the Federal Government?

It was found that Government laboratories, and especially NASA laboratories, should be the prime national producers of applied research in aeronautics. American aeronautic needs the new stimulus of markedly increased outputs of broad-based innovative research from NASA laboratories more than it needs most of the technology advancement and development-oriented programs currently underway in these laboratories. The Government should use manufacturing companies for the vast bulk of development and most technology advancement. However, the Government will have to implement programs to encourage the transfer of full information on technology and research advancements, from the companies that do this work for the Government, to competing companies. Universities should be the primary sources of basic research. Service R&D companies and non-profit R&D institutions provide valuable, specialized, supplementary technical capabilities and other unique attributes, which together span the entire spectrum of aeronautical R&D.

Album, H. H.↗
NASA NTRS1980

Spatial evolution of magnetic fields as seen in coronal streamers to 12 R sub o during the solar cycle

Outer coronal photographs made from high altitude aircraft at the solar eclipses of 1966, '70, '72, '73, and '79 which sample various times in the solar cycle are presented. Coronal streamers extending from the solar limb to 12 R sub o are displayed. The evolution of the streamers as they distort magnetic field lines to large distances from the Sun is examined. Results show that the distortion is varied, that the polar plumes can be traced beyond 8 R sub o, diverging apparently along dipole field lines, and that the divergence varies along the solar cycle. Various changes in nonpolar streamers are discussed including the tendency to become radial beyond 3 to 5 R sub o as if controlled by the solar wind.

Keller, C. F.↗
NASA NTRS1980

On the equivalence between semiempirical fracture analyses and R-curves

The relationship between the R-curves and semiempirical fracture analyses (SEFA) is investigated theoretically using a hypothetical material. Equivalent R-curves (ERC) are developed for real materials using data from the literature. It is shown that for each SEFA there is an ERC whose magnitude and shape are determined by the SEFA formulation and its empirical parameters. The ERC is equivalent in that it predicts exactly the same relationship between the fracture stress and the initial crack length (residual strength) as the SEFA. If the effective R-curve is unique, then the various empirical parameters cannot be constant, and vice versa. However, for one of the SEFA examined, Newman's SEFA, parameter variations are small enough to be within the range of normal data scatter for real materials.

Orange, T. W.↗
NASA NTRS1983

Implementation of R & QA practices in Research and Development programs

DOE has established a number of broad programs aimed at reducing fuel consumption. Several programs address the R&D of ground transportation propulsion alternatives to the conventional spark-ignition engine. NASA Lewis is responsible for managing the effort between the Government and industry teams involving American and foreign companies. Thus, existing NASA SR&QA procedure were modified/adapted to these R&D programs and implemented to assure that the test hardware design intent was met, the hardware was not hazardous to personnel, it would demonstrate reliable operation, and it would help establish the future R&D quality assurance and maintainability requirements. This successful low-cost approach might be applicable to other similar projects.

Bankaitis, H.↗
NASA NTRS1983

High spatial resolution VLA observations of the R Aquarii jet

The Very Large Array was used to observe the jet feature of the symbiotic variable R Aquarii. A steady emission at 6 cm was confirmed for the past year, with the jet located 6.4 arcsec from R Aquarii at 29.3 deg PA. A velocity for the jet has been calculated as 40 km/sec, and may be accompanied by an ejection velocity in the range of 760-1800 km/sec. Since R Aquarii is the closest known object with a jet, further monitoring is recommended in order to detect any episodic mass transfer in what may be a binary system. The mass transfer, monitored at various wavelengths, would account for the observed optical and radio properties.

Kafatos, M.↗
NASA NTRS1985

The R Aquarii system at optical and radio wavelengths

New continuum observations of all radio components of the R Aquarii system at 2, 6, and 20 cm are reported which allow determination of polarization properties, integrated flux levels, spectral indices, and hence the emission mechanisms of the individual components. Complementary wide-band optical observations are also reported to help determine the nature and structure of the compact double radio source (CDRS) and the R Aquarii radio jet. The results of these observations are discussed in detail with regard to models currently or previously proposed for the R Aquarii system. It is concluded that the compact H II region spectral index is about +0.6, indicative of a thermal and optically thick expanding wind from the long-period variable. The radio jet emission is shown to be optically thin, thermal, cospatial with optical emission, and stable over the last few years. The CDRS is shown to be an extragalactic background object.

Hollis, J. M.↗
NASA NTRS1985

R and D limited partnerships (possible applications in advanced communications satellite technology experiment program)

Typical R&D limited partnership arrangements, advantages and disadvantages of R&D limited partnership (RDLPs) and antitrust and tax implications are described. A number of typical forms of RDLPs are described that may be applicable for use in stimulating R&D and experimental programs using the advanced communications technology satellite. The ultimate goal is to increase the rate of market penetration of goods and/or services based upon advanced satellite communications technology. The conditions necessary for these RDLP forms to be advantageous are outlined.

Source record↗
NASA NTRS1986

Isotopic compositions of bismuth, lead, thallium, and mercury from mini r-processing

The yields of stable isotopes of Bi, Pb, Tl and Hg as well as yields of Pb-205 are calculated with a parametrized model for 'mini r-processing' in the Ne, O, C-rich zones of explosive burning in massive stars. The Pb isotopic compositions stand out by their comparatively low Pb-207 yields and by the fact that this r-process variant yields Pb-204 quite abundantly. The average Pb-205/Pb-204 yield ratio of 6.1 is the same order of magnitude as yield ratios deduced for s-processing. The Hg from this mini r-process looks like normal solar-system mercury, but with Hg-196 missing and the light s-isotopes A = 198, 199, 200 and 201 depleted (especially the odd-A species).

Heymann, D.↗